Excellent tutorial, you included many pro tips, and I'm a 40 year mechanic lol, very well done, I appreciate your brevity and editing this video, I recommend your DIY channel to anyone. Wouldn't change a thing!!😉

@manflaco

4 жыл бұрын

Thanks for your comment. JP

"wiggle it".... Best line of the show. Thanks for the vid man.

VERY VERY GOOD CAMERA WORK, WAS EXCELLENT JOB DONE WELL 11/10 CHEERS JIM

@manflaco

8 жыл бұрын

Jim: Thanks for you comment. This type of jobs are difficult by themselves; handling a camera also complicates things, but since I didn't found any videos at the time about removing the water pump, I decided to do one.

Thanks so much for this video, helped me so much (and still will in future). Turned out the plastic connection on the water pump housing was *this* close to sheering off for a long time, as I found out while trying to jiggle the thermostat connection off, and it broke off at the other end, with a huge splash of coolant. Now there's my problem!

Great video of how to do it yourself. NICE JOB

Very nice thank you for taking the time to help others

Enjoyed very much. Great instructor style. Thx. 💯🎯👍

Thank you. You helped me a lot.

very good video and the advise excelent

AMAZING instructional video! Thank you so much! You made a very difficult situation bearable. I'm going to fix my whole car!

@paxtonorlando8003

2 жыл бұрын

I guess it is kinda off topic but does anybody know of a good place to watch new series online?

@davidmark4182

2 жыл бұрын

@Paxton Orlando Flixportal :)

@paxtonorlando8003

2 жыл бұрын

@David Mark thanks, I went there and it seems like they got a lot of movies there :D Appreciate it !!

@davidmark4182

2 жыл бұрын

@Paxton Orlando no problem =)

Perfect! Thank you for making this tutorial.

@manflaco

7 жыл бұрын

Thanks.

Nice job thank you.

Great video

Great vid thanks dude

Great job thanks

You gave me the confidence to try to do the job myself, very well explained and to the point. Only thing that puzzles me is that the the water pump model you use for your job shows as non-compatible with the 2001 Mazda Tribute in multiple searches. Any thoughts?

@manflaco

7 жыл бұрын

Juan Carlos Martinez-Sanchez , thanks for your comments. Strange, the replacement pump I used is Ford/Mazda original replacement. Remember: mechanically all Escapes and Tributes of the same years are the same.

Great video. What is the part number for the plastic connector to heater you mentioned in the 11:10 mark?

@manflaco

3 жыл бұрын

Leo: Check below on my replies. Most of the hoses must be purchased directly from a Ford parts supplier.

would you recommend taking the whole pump off just to replace the front part ? do you know if the front part has a gasket or just need sealant to connect to back part ?

@manflaco

7 жыл бұрын

Saab Aero: Yes, I would recommend taking the pump off. Is too cumbersome and tight to split the pump, although not impossible.

Mr rochet, great video thank you. my leak was not the water pump but the bottom outlet hose. part number yl8z6n746ba is got a clamp on the top, please how do I take it off?

@throwawayyoutube

7 жыл бұрын

there is a little clip holding the clamp open is it to make install easier?

@manflaco

7 жыл бұрын

To be honest, I removed/installed that hose with the pump out. Is much easier.

@manflaco

7 жыл бұрын

Yes, the clip on the new hose clamp is to hold it open until ready to be installed.

also jist pull the cover up evenly no need to use magnet

Mr. Rochet my Ford Escape 2001 3.0 have the same water pump I can't find the trick to remove the long hose, can you show ho to do it?

@manflaco

7 жыл бұрын

If you are talking about the one that goes on top of the engine block, that's a pain in the behind to get out ! I also had to struggle to get it out. Check the video again: I used a small long nose pressure pliers to open the clamp that holds it. Good luck.

Mine i got problem with leaks from water pump the connector of small hose, because of the plastic O ring..can you suggest what kind of o ring can i replace for that connector? Thanks in advance. Im from philippines🤗

@manflaco

3 жыл бұрын

There is a plastic connector on the longest hose. I don't recall a plastic O ring. The plastic connector can be replaced with a bronze one of the same size.

hi the water pump small hose below has a switch what is that for should it be closed or half open ?

@manflaco

7 жыл бұрын

Chris p: I'm not sure what switch you are talking about. Is you SUV a V6 or a 4 cylinder model? The one I worked on this video is the V6 model. If you can, please send a picture of the "switch". Jean

Where did you get the lower hose that comes off the water pump I believe it's 5/8 hose for the heater, I can not find it anywhere

@manflaco

8 жыл бұрын

Hi whatupfuch: I tried to get those hoses via internet and wasn't lucky. You need to go to a local Ford parts dealer and find them. There are 7 hoses in total. Here are a couple I found on my invoices...(sory, I don't have all of them). XS2Z-8A577-AB SHORT HOSE XS2Z-8A567-AA HOSE The above two hoses go to the pump and plastic manifold. You need to get the other ones that go to a plastic hose manifold that sits besides the pump. Your dealer should be able to show them on the Ford parts diagram. The lower one I show on the video, goes from the pump to the block (front side). It changes depending if you SUV has oil cooler or not. My doesn't. Try to have your VIN number handy. Hope this helps. JP

@manflaco

8 жыл бұрын

Good news! I found the info you were looking... These are the other hoses I bought: KH-125 Heater Hose KH-134 Heater Hose YL8Z-6C658-A Hose YL8Z-18C553-HG Hose I hope this helps. JP

@whatupfuch

8 жыл бұрын

+Jean P. Rochet thank you for your help

@prtbone78

7 жыл бұрын

how much total for all parts? buy motor craft or other brand in sure motor craft better but is it that serious to get motor craft?

what are the part numbers for the hoses?

@manflaco

3 жыл бұрын

Hi; Here are some of the numbers: KH-125 Heater Hose KH-134 Heater Hose YL8Z-6C658-A Hose YL8Z-18C553-HG Hose I hope this helps. JP

hey I have 2001 ford escape v6 xlt. get crappy mpg. 170 180 full tank. throttle body cleaned so they said well mechanic said. get valve changed about 2 yrs ago. But. I feel i should get more mpg. any tips?

@manflaco

7 жыл бұрын

Those V6 engines are known for having leaks on the intake runner silicone seals. They should be replaced after 60-80K+ miles. The symptom is rough idle at cold starts that improves after the engine gets to operating temp. Be aware that there are seals above and under the intake manifold separator. Many people change only the upper ones and forget about the lower ones. If you do the above, change all spark plugs (anyway you will need to remove the intake manifold to replace the three plugs on the rear of the engine). Also try Techron gas treatment and fuel filter replacement.

@prtbone78

7 жыл бұрын

Jean P. Rochet I bad oil in 2 plugs well when mechanic chafed plugs I had manifold gaskets upper and lower he didn't replace for me because said may need to do I think engine gasket or whatever he said also ran scanner no codes. But I think I'll replace manifold gaskets asap because 140 miles on full tank is ridiculously low to me. got 210 one weekend in a highway trip then next weekend on reg driving city with some a.c usage 140. before he cleaned throttle body had 170 180reg city driving. so something is wrong. And I hate the fact I get low miles. wanna improve that but if it's them gaskets I'll try that. ask I i mention changed valve. meant egr valve. But I'm next owner after the egr was changed may be it's worn and needs replacement. plus read pvc but that's for emissions but if will help gas miles then I'll change too but if won't help then won't. jist asking for tips to improves mpg. thank you for the feedback

@prtbone78

7 жыл бұрын

Jean P. Rochet I did fuel filter previous owner must have never changed it was rusty and leaking. replaced less than a year ago. how often should I change. plus only out about 2 thousand miles on it since got it.

@manflaco

7 жыл бұрын

Check the status of the catalytic converter (many videos on YT on this). I've seen clogged catalytics giving you that same result.

@manflaco

7 жыл бұрын

Check this video: kzread.info/dash/bejne/eXV4mbanh5e1Zrw.html

Where can I find a water pump for 2003 mazda tribute

@manflaco

4 жыл бұрын

Kevin Jones I bought mine from a Ford Auto Parts dealer here in Puerto Rico (same as Escape 2003).

@anotherone9460

4 жыл бұрын

Order it from Amazon.

@anotherone9460

4 жыл бұрын

Mazda tributes/Ford escape share the same parts.

Forgot where breather tube goes.. help

@manflaco

7 жыл бұрын

You have to look well into the center right side of the engine block, under the MAF connection point. Is way down there, a round plastic connector with a screen on the tip. Use a good flashlight, you will find it.

Where has that hose clamp tool been my entire life?

@manflaco

2 жыл бұрын

Hi: very useful! You can get it about anywhere auto tools/parts are sold.

8 mm or 10? thought was 10. But great vid

@manflaco

7 жыл бұрын

On mine is 8mm. Maybe is 10mm on yours.

terrible video