This guy actually cares what he’s doing. It’s the little things like cleaning the oil reside with brake cleaner on the drain plug and after he puts on the filter etc. and then even spraying the rubber grommets. Dude keep up the good work!

@garagepursuits8158

2 жыл бұрын

thanks for the kind words. this is how I work on cars though, I just feel that if I take care of them they will take care of me😅

@pmjaynes

2 ай бұрын

He talks to much just like women do. He is probably right but I am a man come on straight to the point, name the foods first and the talk all day long after that

Thank you for this. I just bought a 2021 CX5 Carbon Edition and I got very intimidated by the shroud on the bottom of the chassis. WIth this video I feel more comfortable working on my car after my mechanical warranty expires

@garagepursuits8158

2 жыл бұрын

there is nothing to worry about, this car is extremely easy to service. I only have 9k on it now so I cant show any other service at this time.

@Americafirst-i8q

Жыл бұрын

I used to work for a Mazda dealership and drop engines out of the Mazda 3

@golfwipe

Жыл бұрын

3.14 Use a plastic cup over the old filter and it won’t pour out all over.

They are great SUVs, got my 2016 to nearly 300 000km with only reg maintenance, 3 rear wheel bearings, and a complete brake discs / pads job around 160k. No rust at all on the body, and I live in Quebec (snow / salt / gravel..) Wife has a 2021 CX5 and it is rock solid too

The Mazda filter has no ADBV, not needed here, so most all oil will drain out of filter. I ALWAYS change filter first, less messy. I also fill the filter with oil to reduce chance of dry starting. My 'maintenance minder' was set wrong by dealer. I reset to 5000 miles. The Fram UG 7317 fits great-it's a better filter. Magnetic drain plug installed. IF necessary, turn over the drain plug gasket and re-use. I know, they don't like that but the engine doesn't care and it works.

@garagepursuits8158

2 жыл бұрын

thanks for the advice , and thanks for watching

@Manzo98_

2 жыл бұрын

Fram filter is proven to be the worst filter to put on a car. Build quality is not all that great. Look it up on KZread you’ll see

@dwendt44

2 жыл бұрын

@@Manzo98_ Provably wrong, There are many filters that are way worse than the orange can. Purolator filters have a history of torn media. Many off brand filters do not filter as well as the basic orange Fram. KZread is full of biased opinion and fact free comments.

@goinpostal51

6 ай бұрын

@@Manzo98_ The Fram Ultra Guard (UG), is a good filter. The orange Fram, not so much.

Great video! Just had a quick question. What side of the Drain plug o ring, goes against the oil pan? Or does it really matter. I always thought the rounded side goes against the drain pan, to crush against the hole of the drain pan. Thank you!

Meh Dude!! So glad you made this new video on how to change the oil, and showed everything I asked for in the 1st oil change video. Sizes, parts, etc. Thx!

Nice video, very clean service. Well done.

@garagepursuits8158

2 жыл бұрын

Thank you, thank you

What's the oil filter wrench you use?

Was that a universal socket/oil filter wrench? Where did you get that?

So my question is about changing the transmission fluid and what’s the best way on a 2019 cx5 55,000 miles and I definitely believe in changing this fluid 💯Thank you 👊

@garagepursuits8158

Жыл бұрын

easy way? if you drain the trans pan about 4.5 liters will comes out, so drain it , top off fluid , then drive about 500-1000 miles drain the pan again, change trans filter and gasket . top off fluid. that should be sufficient

We're sort of like twins. I'm about to do my second oil change at 6,000 km. I guess you drive a little more than me. So I noticed your new wheels now compared to your first oil change. They look great. Did you also installed your new springs?

@garagepursuits8158

2 жыл бұрын

hahah , yeah i drove a lot this year, i drove through a few states from California, nevada, utah and Arizona. I went to a few national parks.. Yes I installed corksport springs before summer time. thanks for checking out the videos, I appreciate it .

@golfwipe

Жыл бұрын

10.10 I thought it only held 4 1/2 quarts after I put in five it still showed 1 quart low and had to add another half a quart to bring it up to a half a quart low, very nice video very nice shop.

so for the drain plug, you always finger tighten it and then use a torque wrench to torque it to spec? 23 ft lbs. but if you dont have a torque wrench can you just use a 3/8th ratchet and do 1/4 (quarter turn) ?

@garagepursuits8158

Жыл бұрын

Yeah, it just needs to be snug. Give a nice tightening without overdoing it. The oil filter is hand tight also. You shoulf be able to break it loose by your own strength. Or by minimal help of a tool.

Clean the oil off the engine cover. U got hand prints all over. Just saying. First thing people will notice when the hood is popped open. Little details make the job.

Great video, do I have to reset the computer so I know when to change it next time, 7,500 miles??

I gotta get me one of those hydrolic lifts. You make it look easy.👌🏻

WIX filter and Edge full synthetic is safe to use? Just got a 2020 cx5 none turbo.

@garagepursuits8158

Жыл бұрын

I use wix in my infiniti, it hasnt had any issue.

Thank you for the thorough review! Could you leave the plastic shield off or is it necessary to put it back on since it is on the smaller side. I do live in Minnesota and we have lots of road salt if that makes a difference. Thanks again!

@garagepursuits8158

2 жыл бұрын

I would leave it on, most underpanels are for aero dynamic purposes, they allow the air to flow freely under the vehicle. There's a possibility it could cause a wind noise too.

@euphoricjellybean

2 жыл бұрын

Leave it on please. Especially since you do have to deal with road salt. It can severely compromise the life of your vehicle.

@131601

Жыл бұрын

Details matter and you sure take care of the details…….nice job and thank you !

Just bought a new 2022 CX-5. That plastic piece is going to be annoying to remove. My new 2021 Corvette has holes right where the filter and drain plug are. No plastic to remove. That is how it should be done.

@garagepursuits8158

2 жыл бұрын

Its not a big deal honestly. It keeps the bottom aerodynamic 👍😆

@diegudr

Жыл бұрын

If you leave the plastic piece off, there will be the hole you are wanting.

Are you planning on keep posting services about this cx5 in a future coming

@garagepursuits8158

2 жыл бұрын

Yes, i will post more maintenance videos 👍and other car related stuff

New CX5 owner and I have the NA 2.5 PF, in your video you said Na gets 0/20 does that apply for the 2022 models and what oil como is recommended. Thanks for your help and thanks for posting the video.

not bad but i fully drain all my oil and even wash it a bit with new oil before putting the drain plug and filter.

where do ppl change thr oils if they dont have garage space? like is thr a facility we can rent like this?

@garagepursuits8158

2 жыл бұрын

For people in the military, i know there are hobby shops on base to use, a long time ago i did oil changes on the floor in my apartment parking lot. I used ramps and was carefull not to make a mess. You can buy an oil drain bucket and when you are done you can drain it for free at a autoparts store.

Can you show how to shut off the service due light?

@garagepursuits8158

Жыл бұрын

Look at my videos, i have one for 2021 cx5

When was you’re first oil change? Did you do a new engine break in?

@garagepursuits8158

2 жыл бұрын

Its not required, but i did a break in service at 1,500mi

great job! clean and nice

Do you think the oil should be the mazda brand oil with the moly in it. Or should fulll synthetic oil be fine

@garagepursuits8158

Жыл бұрын

A good reputable brand synthetic oil will be fine. Just use correct weight. The owners manual list all oil specifications it must meet. 👍

@earnhardtfan77

Жыл бұрын

@@garagepursuits8158 got it. Thank you.

@dingusfuzzklonnkt2755

8 ай бұрын

​@@earnhardtfan77the moly products are worth the money. If you have the turbo version or plan on keeping the vehicle into the 200k range the moly products are going to help you get there in my experience. Try them out and look at the difference in the oil when you change it, the breakdown at 5k is barely noticeable.

nice video! very good service. mind if i ask if youd recommend using other oil filters such as amsoil or should i stick with the oem thats made by tokyo roki/mazda?

@ChicagoRob2

4 ай бұрын

The Mazda OEM filters are made by Denso and are very high quality. There is one other filter I like, which is the MicroGard Select. Whip City Wrencher did a video on this filter and found it to be extremely well made. Personally, I buy my OEM filters at my local Mazda dealership for around $12, but the Microgard is cheaper. Either way, you can’t go wrong. BTW, I forgot to mention the Premium Guard Extended Life filter available at O’Reilly’s, which is the same as the MicroGard Select.

"It's too difficult to see it in this video" No shit, especially when you hold the dip stick out of frame. Good video btw

Nice! I use the Castrol Edge in my cx3 too! It seems to burn about 1/3 of a quart between changes. It has since it was new... this seem normal? I love the car... 25k miles going strong😁

@garagepursuits8158

2 жыл бұрын

great oil! that amount of burn is pretty typical. you got nothing to worry about

@samliang4146

Жыл бұрын

absolutely not normal in any mazda after 2014 after it separated from Ford. you should definitely get professional check up for oil burning.

@Montana270

Жыл бұрын

@@samliang4146 I've got 40k on it now, it actually doesn't burn any oil after switching to gf6 grade oil interestingly enough.

@samliang4146

Жыл бұрын

im shock to heard the edge can burned oil cause it is one of the best oil oit there tho. Wait, im not quit sure what gf6 it is. Can I ask is the edge not one of the gf6 grade?

@Montana270

Жыл бұрын

@@samliang4146 Yea, it must just run really hot in there and burn off or something

why the owner manual says capacity is 4.83 litter with filter change

04:10 I always use Bosch or WIX ... they are really well made.

@diegudr

Жыл бұрын

Yeah no need to use OEM. Especially if you are tossing them every 4k.

@thetechlibrarian

Жыл бұрын

I’m learning as much as I can about Mazda coming from Toyota they actually value flow rate over filtration so you do want to use the OEM filter pick up wipes but they do offer a TRD filter which is a higher quality. Does Mazda offer anything like that that’s OEM

What’s the Kent product on your bench ?

I have a Mazda CX-5 2018, and when I changed the oil i didn't see a washer, does CX-5 2018 come with it?????? 😮

@garagepursuits8158

Жыл бұрын

i think you have to ask separately when you purchase. sometimes reusing the old one works

@ChicagoRob2

4 ай бұрын

You definitely need the crush washer to prevent leaks.

Why are you changing the oil at 4,000 mile intervals?

@garagepursuits8158

Жыл бұрын

i did one low mileage oil change first , then after that i was doing 7500 miles.

@matsudakodo

10 ай бұрын

I'm doing my first one under 1k then if oil analysis looks good about every 5k after that. '23 Turbo.

I think you forgot to mention to check the gasket seal from the oil filter if it got stuck to avoid double gasket. It could leak oil.

@garagepursuits8158

2 жыл бұрын

Yeah you are right, Its probably not likely with a high-quality filter, but anything is possible

@golfwipe

Жыл бұрын

I’d like to run genuine parts OEM, and I bought a bunch of oil filters from Mazda and they’re a different part number than the guy showed above this in a different video? He also said his oil filter came in a box with a washer for the green bolt, my oil filter part number is P01 D- 14 - 302A Dash MV! On the other side it says Mazda P5518 value products by Mazda made in Mexico, I was wondering if they make a Japanese one for this car? I got these filters from a Mazda dealer.

@golfwipe

Жыл бұрын

Drain bolt😂

@Doses_Oji

Жыл бұрын

@@golfwipe they have 3 version 1 made in japan 1 made in Thailand 1 made in Mexico according to my friend the Mexico one is more of budget filter and have had bad experience with it the thailand & japan ones are solid

No crush washer part number?

@garagepursuits8158

11 ай бұрын

I dont have it, usually parts department just gives you one with the filter

That's turbo engine?

@garagepursuits8158

2 жыл бұрын

yes this is the usa version 2.5 turbo

That old oil looked dark.

Can you give me the part # for the oil filter

@golfwipe

Жыл бұрын

I bought a few of them from the Mazda dealer and they got mixed in with my golf cart filters and look exactly the same, so I thought that I had missed placed them and I was going to reuse the old filter, once I remove the filter and saw how small it was I went through my golf cart filters and sure enough I found several of them that said Mazda on them, the filters I got from the dealer were made in Mexico, I called the dealer and wanted the ones made in Japan if they were available? He gave me another part number and I asked him where it was made? He said that one came in a box and had a washer that came with it and was made in Thailand! Then I went to the Mazda website And found a third filter, so I called Mazda corporate and they didn’t know if that one was made in Japan and they’re going to get back with me, I would sure like to run a Japanese filter on my Japanese car.

Don’t you grease the joints?

@garagepursuits8158

2 жыл бұрын

What do you mean? Ball joints?

@donzheng7068

2 жыл бұрын

All joints. Any place rubber meets metal. Like swans bar, control arm tie rods steering rods Do you lubricate these joints during oil change? Some joints are sealed with rubber boots

@garagepursuits8158

2 жыл бұрын

@@donzheng7068 most modern cars dont require lubrication of the chassis or suspension. all ball joints are self contained or covered by rubber boots. I would only spray nuts and bolts with penetrating oil if you live somewhere where it snows.

@kenhamilton1460

2 жыл бұрын

When car reaches 30,000 especially Northern cars with all that rock salt they use on the roads its best to use a pressure cleaner on ALL rubber areas with joints...then use a good rubber silicon spray to help protect the rubber..if not the rubber breaks down ,and when millage gets high the car will sometimes Squeek where those rubber joints are.

@cyclechris6591

4 ай бұрын

@@donzheng7068yep, there hasn’t been zerk fittings on cars for 10 years now. Supposedly all sealed.

Can I use 5w30 on the Naturally aspirated 2.5 engine? I live in Southern California where the weather never goes below 50 or 45ﾟ

@garagepursuits8158

2 жыл бұрын

Mazda recommends 0-20 oil for your application. I would personally just stick with 0-20 weight.

@zhaoliu1031

2 жыл бұрын

My Mazda 6 manual recommend 0w20 for US, 5w30 for Mexico. I am assuming you can use 5w30 for summer, 0w20 for winter. I am not professional BTW.

@chippercatt

10 ай бұрын

yes my dealer installed 5w30 oil on my N A

Dont use ur dirty gloves inside the car and clear the fingerprints on the cap of the engine

@garagepursuits8158

Жыл бұрын

why are you telling me what to do in my car 😂? Hey , just letting you know these videos are highly edited. gloves are changed often so you don't notice! i always wear gloves , you are not going to stop me. thanks for watching

Clean job, annoying music!!!

@garagepursuits8158

Жыл бұрын

thank you

Dude, kill the music

Why 5W30? Recommended oil is 0W20

@garagepursuits8158

Жыл бұрын

for north America, turbo cx5 is 5-30 non turbo is 0-20. also i live in the desert 😅

@emersonsamaniego6781

Жыл бұрын

how manny mile ?before change oil ??

@jaysonanderson1148

4 ай бұрын

@@garagepursuits8158what’s your opinion on Mazda dealerships saying to use conventional 5w30 in the turbo? I just had my first break in oil change done at 1,000 miles and was baffled when they told me not to run a synthetic in the turbo 2.5