You can get the pump here.. amzn.to/3bVBkI6

@TopQualityHedgehogs

6 ай бұрын

The link to this part has the filter too but the one you installed has just the swing out part. Did you buy the whole thing and remove the part you installed or is there another link for just the part you installed? Thank you, great video.

@MissouriAgitater

6 ай бұрын

@@TopQualityHedgehogs the part I used in this specific video is unavailable, So the link is to the part that I now use.

So glad I stumbled on this video! I only ever found info about cleaning out the filter/cleanout. But the pump was my problem the whole time. Changed it out tonight and the washing machine is sooo much quieter now. Thank you, thank you!

@MissouriAgitater

22 күн бұрын

Awesome 💯 glad it worked for you, have a great weekend 👍👍

This is a very good video, and one of the few that actually explains that this error code can also indicate a pump issue. Nice work!

@MissouriAgitater

Ай бұрын

Thank you 👍

I can't believe how simple the fix was because I watched this video. Took me around 10 minutes to take off the back and get into the filter... the filter was LOADED with crap (and coins). Thank you so much for making this video!

Thank you! I was able to open the top and find the unlock tab! Just want to say that your pump replace video was one of the clearest, most direct of any “how-to” videos I’ve watched, on any subject.

Thank you for this great video! I fixed my problem!! Error codes E01and F09 led me 1st to the filter. The filter was clogged with baby socks & lint!!! Your step by step instructions were right on point. I called a technician initially who quoted me an estimated cost of $300 + cost to repair. Took me about 30 mins, & I was up & washing clothes. Many thanks!!

@MissouriAgitater

3 жыл бұрын

Glad it helped!

Thanks - I found an empty dog waste bag in the trap. I'm gonna go ahead and assume that was my problem. Great video though - you saved me a service call during a pandemic!

THANK YOU. Piece of cake - just needed to clear out the gunk and now know this will be a maintenance thing I need to do every now and then.

Great video. I cleaned the trap and put it all back together only to have the error code come back. So I took it all back apart and took the pump apart this time. The pump looked clear but was pretty warm as if it had been struggling. Almost put it back together but thought I'd shine a light. Found a womens bobby pin sitting in the opposite side of the pump assembly. Just enough to arrest the impellers. Working great now. Lesson - Check pump and trap while you have the whole thing apart. Do it right or do it twice.

Thanks a lot, brother. I just finished this job on my machine. I was getting this code along with a "Sud" signal... At first, we thought that just meant too many suds and tried to reduce our detergent per load. But the code kept coming back. Pulled the filter and out came 4 face masks and a little jewelry bag.... No problems with the pump bearings, thankfully. The wife is hand washing the face masks from now on, she says. Ha! Saved me at least 100 bucks.

@MissouriAgitater

3 жыл бұрын

Awesome!! Glad the video was able to help you. Happy new year!!

Just wanna say THANK YOU for going through how to check the drain filter, because I was searching for videos on how to replace my drain pump when really all I needed to do was clean out my drain filter. Thank you, again!!

@MissouriAgitater

Ай бұрын

That's awesome to hear 💪 glad you got it going again.

Thank you for this great video. I followed the steps and cleaned out the drain filter for our washer. It totally worked - amazing!!

Thank you! This was far easier than removing the whole front of the washer as others had suggested.

@MissouriAgitater

4 жыл бұрын

You're welcome!

I know it's been years since you posted this but wanted to let you know you save me so much money n time with this video. Just want you to know how much I appreciate you n thank you sir. Merry Christmas to you and your family

@MissouriAgitater

6 ай бұрын

I'm glad it's still able to help people save time and money, especially around the holiday seasons.. Merry Christmas to you and your family as well 👍

Thank you sir. Cleaned the filter as suggested, but still encountered the same issue. I ordered and installed a new water pump (easy, thanks to you) and she is running like a champ. Can't thank you enough, sir.

@sergeyfandalyuk1247

8 ай бұрын

Do you know the part number for the pump?

Great video! Also saved me a service fee. Found a sports bra pad in there along with a ton of lint. It was completely blocked. Thanks so much!

Thank you so much. I followed this video to a T and I fixed my washer myself! Thank you!!!!

Thank you so much for this video. I unscrewed the filter but it was clean. I tried opening up the drain pump like you demonstrated and I had a small wood panel nail lodged in there. I removed it and my washer is draining again. My wife and I are expecting a baby this month so the potential expense and headache we avoided is such a huge help. Thank you!!

Thank you for the video! I have the Maytag MHW8200FW0 washer and I found 2 bra pads + a ton of dog hair. This was my first time cleaning it in 4 years. I am sure the error code E01 + F09 was because the bra pads BLOCKED the flow of water. Surprisingly, the pump had minimal amounts of dog hair from my husky. The pump pushed it all out but the pads were the main culprit! Thank you!

We cleared out the gunk but no joy. After waiting a week for a replacement motor though we were good to go. Thanks for the help! Much cheaper than paying a repairman or getting a new washer.

Just what I needed! Pulled the filter out, cleaned, reinstalled and still no luck! BTW, I found some unusual things but was able to identify all but 1! Now I know that it was the pump seal! We will order the new pump ASAP! Thank You so very much and you have been a blessing to us!

@dianavisser-gregory5139

2 жыл бұрын

Do you have a link on where you got the pump from because the one on Amazon says not available. Thanks

I have the same washer and this was driving me crazy. Mine was really clogged up. To bad I could not post a picture. Thank you for making this video, much appreciated.

Extremely good directions. Made the fix pretty easy. My Maytag had five Philips screws instead of four screws. I couldn't get the pump to swing back into to position. I had to remove the hinge bolt and push the pump directly into the pump housing. The video and verbal directions were great. Saved me a lot of time.

@kirkmatenaer1640

2 жыл бұрын

Had the same issue, this comment (re: hinge bolt), really helped. Thank you!

@Kris-xw4ns

Жыл бұрын

Good to know!

Thank you for an easy to follow video. You helped us fix our problem!!

Wow! After reviewing several DIY videos I was thinking I was going to have to replace a sensor hose or the pump mentioned. Turns out, my wife had washed a bunch of small pieces of fabric. The whole filter was clogged (my wife knows better now). Easy fix! Thank you for sharing :)

@MissouriAgitater

4 жыл бұрын

Glad I could help!

If I was able to help you save some money you can donate a small amount to my PayPal at www.paypal.me/Moagitater So I can keep making these washer and dryer repair videos. Also dont forget to Subscribe.. "it helps my channel grow"

Thank you SO much! You saved us during quarantine. Unclogging the filter did the trick for us. I needed help moving the washing machine out from the wall, but it was otherwise simple to do.

@MissouriAgitater

4 жыл бұрын

Awesome!! I'm glad it helped you out.

I’m so thankful for your video, I have been searching for the right video showing this exact process and yours is the only one I found with this washer. Directions were clear now I can check my impeller to see if that’s what’s throwing the code. Thank you very much

This video helped me a great bit. I followed step by step and it now works perfectly. My filter was clogged but the pump was cleared as it was changed 4 months ago by Maytag repair. Thanks again!

@MissouriAgitater

3 жыл бұрын

Awesome!! I'm glad it helped you. 👍

Your are fantastic! Found a couple face masks in the filter trap. 😖 Your clear video and step by step instructions helped me fix it and save a bunch of money! Thank you!

@MissouriAgitater

3 жыл бұрын

I'm glad it worked for You!! Hope you have Happy Holidays coming up..

Thank you very much you are professional and very good teacher. Gud bless you

It's amazing how easy it is to fix appliances but people don't just do a search and find videos like this. I fixed my old washer about 5 times from youtube videos including the control board. But it finally gave up the ghost at 16 years. This is the best pump one I have seen, I had a LG but it looks like they are all the same.

@MissouriAgitater

4 жыл бұрын

Yeah, lots of great info if people just search for it.. This has been my actual trade for almost 30 years now. I only upload tech video's when I get a specific question asked from subscribers.. You know me, my passion is outdoors but I also love saving people time and money. Hope all has been well my friend. I noticed I missed one of your videos.. I'm headed over now to check it out..

@67buddie

Жыл бұрын

Can I lay the washer on it's side it would be much easier to work on

BINGO!!! After removing the drain plug, I removed the pump and discovered it desperately needed to be replaced! Thank you so much for your videos!

@clockwatcher9309

2 жыл бұрын

What a ridiculous place for Maytag to put the drain!

Thank you sir! You saved me time and $$$!

Thanks for making this video! It saved us an expensive service call!

@MissouriAgitater

Жыл бұрын

Awesome 👍 I'm glad it helped you 😁

Thank you for saving me a new washing machine or at best a service call. My pump was shot. Cleaned filter,installed new pump and back to washing. 59$ fix.,Take care

@MissouriAgitater

2 жыл бұрын

awesome!! I'm glad it worked for you and saved your machine.

This was very helpful video thank you

Very useful video thank you!!

Thank You! Helped me out big time.

@MissouriAgitater

4 жыл бұрын

Glad it helped!

Thank you so much! This helped me fix our family washer without having to call a repair tech.

@MissouriAgitater

7 ай бұрын

That's awesome 💯 glad it helped you, it can be such a pain sometimes to get techs during the holiday season 👍👍

Awesome video. Wow! you are a great teacher, too!

Thanks for the help! I replaced my pump based on your helpful guidance in this video. Ordered the pats through Amazon and only challenge was that one screw that was set back. I was able to wiggle it free when I swung the pump open.

Thank you so much! Saved me waiting 2 weeks to get a service call. You made this seem so much less intimidating and I was able to do it myself. The filter took a little bit of elbow grease to get free at first but smooth sailing after that. I apprecaite you sharing your knowledge!

@MissouriAgitater

3 жыл бұрын

You're welcome!!

Excellent! Thank You!!

Awesome job! Saved me at least a hour of searching and disassembly of things that didn't need it! Thank you!

@MissouriAgitater

3 жыл бұрын

Awesome!! Glad it helped you..

Thank you for the info. Wishing you well.

@mikecricket113

4 жыл бұрын

Hey buddy. Hope you fare well. Keep making those videos. I miss the valuable information

Thanks to you, I was able to fix my machine, and I really appreciate it! I was shocked to find 9 face masks and 1 reusable absorbent pad clogging the drain!

@MissouriAgitater

3 жыл бұрын

Awesome!! I'm glad you got it working again.

MANY thanks! our washer threw the error about an hour ago i googled the error and your video was first! we pulled a total of 6 baby socks out of our filter just now... lol. washer is up and running great again :) makes me wonder if this is the same problem the washer in our double stack. hmmm..

Great video!!!

Very informative.I believe I have your exact washing machine. I'm now on my third pump. I still love the washing machine but I wish those pumps had a little more durability to them. I like the simplicity of the washing machine once you get that back panel off. There's not a whole lot to them.

Thank you for the video installed the new pump, cleaned and checked thr hoses. I appreciate your help to help myself.

@MissouriAgitater

Жыл бұрын

Awesome 👍 I'm glad it helped you.

Great video, easy instructions. The only thing that was different with mine was the screws were top mounted.

Great directions. Thanks so much. These are very good machines. Mine gets worked hard. Still working great.

@MissouriAgitater

6 ай бұрын

Thank you 👍

Thank you! This 100% solved my problem - it was like a solid brick of "stuff" in there!

@MissouriAgitater

4 ай бұрын

Awesome 💯 I'm glad it was able to help you 👍

I have the Maytag Maxima MHW6000XW that was throwing the E01 F09 code and the "Sud" code and found these videos showing how to check the drain trap. This model has the pump/drain trap in the front which is hard to access but this video shows a great easy way to get at it. It definitely works and once I got the trap out there was all kinds of stuff in there. As mentioned, the real challenge is getting the metal spring loaded seal hoop back on the gray rubber seal boot once you are all done. It CAN be done by hand, but I highly recommend having another person help hold the hoop in place at a couple spots while you do the final stretch and pull over the lip and snap it in place. I couldn't do it all by myself, but with a helper got it on the first time. Also, FYI there's another video showing another black hose to check for blocks that's in the back of the unit with clamps on both sides....it's easy to reach and worth checking for cleaning out as well.

Excellent explanation thanks…

Thanks! I found 2 small kids socks in the filter, a ton of water came out because it couldn't drain which overflowed the container i had so be prepared. Works great now!

@MissouriAgitater

4 жыл бұрын

That is awesome!

Thanks so much for this video! A broken screw was stuck in my drain pump impeller. Now I'm back washing. I'm not sure how people fixed things like this before youtube.

Thank you! This works

So Helpful!

@MissouriAgitater

3 жыл бұрын

Glad it was helpful!

thank you! it was very helpful..save $ to have someone to repair..

@MissouriAgitater

3 жыл бұрын

You're welcome!

You save mi Maytag! Thank!

@MissouriAgitater

4 жыл бұрын

Awesome!! Glad I could help.

Good work

you saved me! thank you so much!!!🙏

@MissouriAgitater

3 ай бұрын

I'm glad it helped you, thanks for the kind words 👍

Thank you sir you might have just saved me from buying a new washer!! God bless you

@MissouriAgitater

3 жыл бұрын

Great news!! I'm glad it helped..

@1thess523

3 жыл бұрын

I just found a pair of socks and a bunch of other junk in the filter so I'm washing a load right now to make sure that was it 👍. Again thank you for your video. Have a blessed week

@MissouriAgitater

3 жыл бұрын

@@1thess523 Fingers crossed!! 🤞🤞

@1thess523

3 жыл бұрын

@@MissouriAgitater it worked 👍, there was a pair of socks 🤣and some other junk in the filter .

You are the MAN!!!

@MissouriAgitater

2 жыл бұрын

I'm glad it worked for you. Happy holiday's

@vincentdeluca5310

2 жыл бұрын

@@MissouriAgitater Same to you brother.

Thank you!

@MissouriAgitater

2 жыл бұрын

You're welcome!!

I wish they would redesign and place the filter trap access to the outside of the case.

@climbingruven

3 жыл бұрын

Could be made simple with just an access door on the left side of the machine, down low.

Great video, wish I had watched it before I started. My screen was clean so I want to check the pump. My pump looks the same but when I took out the 4 screws the pump would not open. There is another piece of plastic along the side of t he pump. it has a notch on it but I can not figure out how to get the pump open.

Thank-you! Filter clogged with dog fur!

@MissouriAgitater

3 ай бұрын

Awesome!! I'm glad it worked for you 👍

What is the part number for this motor. Never mind I found the link in the comments $50-60 part. Cool! Your video is awesome! my part is coming Thursday.

Good

@MissouriAgitater

3 жыл бұрын

Thanks

My model has 5 screws as we'll. Couldn't figure out why it wasn't swinging out. But did figure it out eventually.

Where did you order the replacement pump? Thank you very much for posting this video..

@pasyeh

11 ай бұрын

I want to know also

Any chance you know how to take the vent pieces out of dryer so i can clean it all out? Thank you

Great video! Thank you. However, before I looked up your video I turned the machine off when I saw the error codes. This caused it to start draining and it wouldn’t do anything more except make the draining noise. So I unplugged it. I have tried to do your unlock technique, but it will not work now. It just keeps making that draining noise. Will, I still be able to get my machine to turn back on and unlock the door after I do the repair you show in this video? I tried to reset and unlock the door and it wouldn’t work.

@MissouriAgitater

2 ай бұрын

After the repair turn the machine back on, if it starts the drain again let it run it's course... If it doesn't shut off after 20 min. Then it's because it think it still has water in it.. you can then try 2 things.. #1 hold the cancel/ stop or power button for 4 seconds. It should stop... #2 if it does not stop draining, remove the top, find the small "fill hose" sometimes they are clear or black.. it's roughly 5/16 in diameter.. unplug it and blow through the hose into the tub. Reinstall and try again.. sometimes these lines get dirt in them holding pressure on the pressure switch, tricking the machine into thinking it has water in it.. I hope this helps 👍💪💪💪

@mlsof8

2 ай бұрын

Thank you SO much!!!🎉

Your video was very easy to follow, though my pump had 5 screws. Took me a few minutes to realize that was what was preventing it from popping out. Filer and pump were clear, but appears the pump is bad. Do you know if when I install a new pump if it will reset the washer? When I plug it in (with the old pump) the display screen is blank and it keeps trying to drain with the door locked light flashing. No other buttons on the front of machine work. New pump arrives tomorrow, so I am hopeful that solves the issue.

@drkatel

4 жыл бұрын

Jared Lawrence, just curious-how did it turn out for you?

Where can I buy a new pump for this exact model in the video??😊

Great video, any info on the pump part number?

@MissouriAgitater

6 ай бұрын

I get them here on Amazon.. amzn.to/3NFsNZu

Besides the error code, did the machine make any noise? With ours, we were able to clear codes in the past and replaced the Washer Water Level Pressure Switch W10448876 Genuine OEM, and that fixed it, but now that didn't work after replacing it. It sounds like it's trying to pump out water but there's nothing there. The drain isn't clogged. So I'm wondering since there is a noise if we plug it back in, if that the pump.

@MissouriAgitater

Ай бұрын

I've seen them make a humming noise and pump no water, I've even seen them run perfectly but pump no water, when I take them apart the impeller is usually broken and detached from the pump motor... Coins, nails and debris usually causes that.

i opened mine from back surprise!!!I guess after these helping videos they changed its place! my filter was looking front and it was all the way front end!!! I could reach with my arm but not seems possible to take it out or clean it from back!!!don't know what to do!!!

Great video! Do you know how I can get the door open to get my clothes out until I can do the repair? Thank you!

@MissouriAgitater

4 жыл бұрын

You can try unplugging it for a few minutes and then plugging it back in. If that doesn't work you can remove the top and reach down toward the door switch to pull the door safety latch cable..

@samisdata

3 жыл бұрын

If you open the trap and drain the water you can open the door. Have a bowl and a bucket handy. We had to drain about three gallons out one bowl at a time. But we didn't have moldy clothes waiting after the new pump arrived a week later.

Hello, does anybody know where i can purchase the water pump?. I tried Amazon but they didn't show me the model for this washer.

Mine pumps out all the water then just keeps pumping and won’t shut off?? Is there a flow switch inside the pump or do I need to change another switch. I believe the pump is ok? I did a quick cycle after the first pump out of water it just kept pumping and the water was out. The cycle stayed at 18mins as well and didn’t continue. I had to cancel the cycle?

Ivan do you happen to have another link for the pump by chance?

@MissouriAgitater

2 жыл бұрын

amzn.to/3utnti9

@dianavisser-gregory5139

2 жыл бұрын

Thank you so much!

Where can i order the pump replacement filter?

I checked the trap, nothing. I replaced the pump, same problem. I replaced the air valve, same problem. I replaced the check valve, same problem. My wife then got the bright idea to change the spin cycle Medium on every wash load. So far, it has been 6 months without a problem. I think sometimes the spin cycle doesn't let the water drain causing the problem. Change the spin rate to medium or slow and see if it helps!

I need just the part that swiveled out, not an entire new drain pump, I’ve looked everywhere online for just that part. Do I have to buy the entire pump and just take that piece off the new one?

@MissouriAgitater

4 жыл бұрын

You would order the housing separate from the pump. Ebay would be a good place to check.

The video helped so much! But now it won’t stop leaking. Any pointers? Did this happen to anyone else? I made sure it wasn’t cross-thread and made sure it was bone dry before I screwed it back in

@MissouriAgitater

10 ай бұрын

Check to make sure your rubber O-ring seal is in place with no cracks, tears or debris in it.

I can't actually unplug the pump. Is there a clip holding the plug in? or do I need to wait for my 16 year old with stronger fingers to remove the plug? I'd rather not create another problem by forcing it if there is a clip or something holding the actual plug in place. But I'm incredibly frustrated at not being able to fully remove the pump. Thank you for a great video.

@MissouriAgitater

9 ай бұрын

There is a small tab that holds it, it can be removed it just takes pretty good force.

Hey Ivan! do you have the link to this exact pump ??

@MissouriAgitater

3 жыл бұрын

You can buy the pump here amzn.to/3m5nouP

@erikacopping2199

Жыл бұрын

Hi thank you for this video!! Do you know how much the replacement pump should cost?

I am hoping this is my issue with my washer! It is making a grinding when it pumps water out during the spin cycle. I have cleaned the filter so I think the pump is damaged.

@saerwentabris3621

4 жыл бұрын

Alas it isn’t the pump. It is the bearings in the basket.

Do you have the part number to the pump I have exact same unit and Al ready cleaned the filter but still makes codes and I never checked pump

@MissouriAgitater

8 ай бұрын

amzn.to/3bVBkI6

I swapped out for a new punmmp got same error. What could be the problem?

Piss poor design. What if the washer is in a place where you can’t get to the back like a washer normally is in a laundry room? They couldn’t have made the bottom front panel come off to make it easier to get to the coin catcher?

@johnfinnerty595

3 жыл бұрын

If you tilt the washer back about 30 degrees (support it with a piece of wood so it doesn't fall down on your hand while you're working on it), you can open an access panel from the bottom. There's another KZread video that demonstrate this..

@JustOneSmallExplorer

3 жыл бұрын

@@johnfinnerty595 literally just came from watching that video. I was just looking to see if someone has the part number for the drain pump. You can even see the bottom access panel here...after he takes off the back. definitely way more work than was needed. This video is still helpful though, just another way of doing it.

@emailausdrucker

3 жыл бұрын

@@JustOneSmallExplorer did you find the pump part number? I just cleaned the catcher, but hardly anything in there.

What is the the part number fir the motor replacement. Mine was not clogged...so need to replace motor but can not find it anywhere I can order

@MissouriAgitater

3 жыл бұрын

amzn.to/3m5nouP

Any chance you can point me in the direction on where to buy a replacement pump ?

@MissouriAgitater

2 жыл бұрын

It's in the pinned post at the top of the comment section. 👍

I have changed the drain pump, cleaned the pressure switch hose, cleaned the drain hose. I have great drain water pressure, so water is draining fine, yet I still get SUD error code and long drain time error code. What else can I check shy of changing the pressure switch? Thank you

@MissouriAgitater

4 жыл бұрын

Have you blown into the pressure sensor hose into the tub? Also do you have excessive suds inside the machine when running a empty load without adding any detergent?

The screw on the right was taken out of one place but put in another place. Is this okay?

@MissouriAgitater

3 жыл бұрын

Good eye!!! Yes it will be fine..

Do you have the drain pump part number?