This is one of the most amazing clear explained 3d tutorial i have ever seen! Thanks for your nice informative video. Want more videos like this one.

this is the best maya tutorial on yt!! thank you so much

thanks for the tut. simple, clear, straight to the point

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021

Thanks for simple and basic tutorial to the point. I am using 3ds max. Before this tutorial I model my hammer using reference image and take a non-efficient way by model top in 3 different primitive and then attaching and bridging. But your method is very concise and very quick and fast. Thanks again. Kindly upload more videos.

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021

Another awesome tutorial....you're the best

very nice video but thanks for the tutorial, and look forward to next video again, thank you so much

Superb CG pros modeling ever That's much thanks

Very Helpful and clear!

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021

So easy and clear. thank you so much

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021

Great Tutorial, everything was so clear and informative!

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021

@komalkr4222

3 жыл бұрын

@@multimediadiploma463 No Don't spam here. Stealing 400-500 Views from every video post nat making you a youtuber.

Hi Sir, which version do you use? Do you have any tip how to set the color of interface and buttons to be like yours? Thanks!

So nice God Bless you Sir

When trying to scale won't get that global and local axis toggle switch

best and great 1 brother

How u make this look smooth from rocky type

how can i do the part at 4:30 ?

Hi and thanks for the tutorials. Can you tell me how you made that free hand selection 9:20.

@Trimitkala

4 жыл бұрын

That's the lasso tool just below the selection tool.

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021

How can I cut diagonally like in min 7:54 ? I'm using the multi-cut tool and the edge loop tool and done see any option for diagonal cuts

@Trimitkala

3 жыл бұрын

Yes, Multi cut tool will work for this. For that you need to drag the tool from out of the geometry.

@icarosh1

3 жыл бұрын

@@Trimitkala It works! thanks a lot!

Very nice sir It's very helpful for me

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021 ......

U Video is best bcz voice clear and step by step

@Trimitkala

4 жыл бұрын

Thank you very much 🙂.

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021 ....

I'm not getting the cut faces tool in mesh tools. Any alternate tool for that?

@Trimitkala

4 жыл бұрын

You can use MultiCutTool. You need to drag the tool on the surface.

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021

I have only maya software and maya hardware renderer, is there any way to get other renderers free of cost??

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021 ..... Tamil and Telugu speech and language

Do you have, or can you make, a tutorial showing how you made your startup logo ? :)

@Trimitkala

5 жыл бұрын

That looks 3D. But actually I have done through illustration and then added motion graphics.

@3rdpoly

5 жыл бұрын

TrimitKala it looks really great - I would really like to see how you did it, if you have the time

@nurmeran

4 жыл бұрын

yeah, me too. i want to watch that tutorial

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021

I'm not getting that little blue toggle button that allows you to switch between global and local access. How do I activate that? Also that you you're tutorial is very helpful.

@RajMajiart

6 жыл бұрын

Hi Bill, when you are giving 'Extrude' command automatically that blue button will appear just beside the Extrude manipulator circle. After giving the command don't click outside. If still you can't see that there can be a graphics problem. In that case you can change the preference of Maya from My Document path and then try it again.

@billfewtrell2703

6 жыл бұрын

Got it thank you for the timely response.

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021 ......

Thankyou ❤️❤️

How do you quickly change from global to local axes? Is it a keyboard shortcut?

@Trimitkala

4 жыл бұрын

After giving extrude command a small sky color circle will appear in the viewport just beside the tool. You can select and deselect to toggle the axis.

@joelrodriguez4664

3 жыл бұрын

You can also hit "Control + Shift + Right click" and select the axis

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021 .....

thanks!

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021

Sir how can i remove green spikes lines in please tell me.

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021 .....

how do you then make it look like real one - like metal?

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021 ..

thank you

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021

4:30 was a bit rushed for my understanding... How did you separate the two tips from the hammer with the Extrude function? Extruding only separate the "layers" of the face, and not the whole polygon for me :/

@pammakwa4731

2 жыл бұрын

Having the same problem here

@sonofzues8414

Жыл бұрын

same

Good one

Why are you not using hotkeys?

maya is very complex software in comparsion with 3ds max....... i put easly supporting segment in max but in maya its very complicated

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021 ..

Global axis and local axis I didn't get it

How can I get into polygon mode? There is no option for that

@Trimitkala

4 жыл бұрын

Right click then select Object Mode.

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021

Sir how to convert in smooth way of model in 9:54 min and 13:23min please explain this

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021

@MrSamridhK

3 жыл бұрын

Hey, Press 3 to view a smooth mesh of your selected object, press 1 to revert back. knowledge.autodesk.com/support/maya/learn-explore/caas/CloudHelp/cloudhelp/2018/ENU/Maya-Modeling/files/GUID-BF4C21CB-C149-449F-925D-5456B1D96EB7-htm.html

@user-yf1xf8xl4g

2 жыл бұрын

Having the same problem here 😢😢

my global and local selection tool(that power like option) is not appering while i'm scaling..

@Trimitkala

4 жыл бұрын

After giving Extrude command don't select any other tool. Keep working with Extrude manipulator... Scale with this tool only.

@rosisneupane

4 жыл бұрын

@@Trimitkala at 4:30 are you using extrude too??

@Trimitkala

4 жыл бұрын

Yes you are correct.

@rosisneupane

4 жыл бұрын

@@Trimitkala but when i do that and extrude ,new face gets created like the way we did earlier in the video after subdividing the cube..please help

@jono8326

4 жыл бұрын

@@Trimitkala Dude, u need to go over this part slowly, been a great tutorial but lost this part. How did u seperate the hammer tip into 2?

how to use vertex tool plzzz answer my question

@Trimitkala

5 жыл бұрын

Right click on the model - select vertex component - press 'W' in the keyboard to select the move tool - and now you can modify the shape.

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021 ....

Best tutorial so far for me. Basic modeling steps .. 1 is primitive 2 ? 3 is smoothing 4 ? I did not get the second and 4 th steps due to your pronunciation. Can you please type it here?

@Trimitkala

3 жыл бұрын

2. Block in, 4. Detailing

@kesavachawali5807

3 жыл бұрын

@@Trimitkala Thanks a lot

4분 26초 어케 하신거에요 하,,

4:34 how make separate polygons?

@RajMajiart

6 жыл бұрын

By switching to the Local Axis of extrusion. How to do it, I just have explained after that.

@ShajesFidgetTutorial

5 жыл бұрын

@@RajMajiart its creating new faces for me so those 2 local object dont separate. how can i switch off creating new faces and just edit (scale) those already existing faces?

@Trimitkala

5 жыл бұрын

@@ShajesFidgetTutorial Whenever you are extruding, new faces will be created. If you want to scale the existing faces then take scale tool and scale it down. For scaling don't extrude it.

@ShaggyLad

5 жыл бұрын

@@Trimitkala I'm having the same problem. When I select the faces and scale them it just makes new faces. It does the same thing when I extrude them too.

@TimV777

4 жыл бұрын

same issue. Both the ends are joined and not seperating :{

Please show us how to render it

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021 .

Thx thx thx thx thx thx,,

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021

At 2:03 what did you press?

@Trimitkala

4 жыл бұрын

I have pressed r in the key board and scaled it down.

@SaneZoomer

4 жыл бұрын

@@Trimitkala Alright, thanks.

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021 .. ..

Sir how to convert in smooth way of model in 13:23min

@mohammadfaezputra3636

3 жыл бұрын

you press 3 my friend

@saurabhshivamverma4192

3 жыл бұрын

@@mohammadfaezputra3636 ok thank You so much 😊

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021 ....

"Ver-tee-cees" haha :)

@yoman9446

3 жыл бұрын

bitch it's not his native language

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021 . .

Okay how many of u .got successful in doing it??.. like..in ur . laptop/computer??

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021 ..

@Eradifyerao

3 жыл бұрын

Desktops are where it's at for powerful software like this!

How the hell did the smooth stuff come from???? URGH

@RajMajiart

6 жыл бұрын

Select the object in object mode and press 3 in the keyboard.

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021

if this is a beginner tut im scared of advanced tuts now

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021

@littlekitty6766

Жыл бұрын

How are you doing now, after 2 years. Question from a stressed beginner...🥲

@samridhamajumdar9769

Жыл бұрын

​@@littlekitty6766 i have the same question 5 months after 😊

Music is too loud, it's distracting. Also, a "beginners" tutorial should NEVER assume the student knows anything.

please ditch the music please....very distracting

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021 ..

I can’t understand anything

@multimediadiploma463

3 жыл бұрын

kzread.info/dash/bejne/Za6OlLdvnsq1nrQ.html MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021

man blender is soooooooooooooooooo much better and easier