Gets this video shared around guys and remember to subscribe! Gonna buy a new camera soon to increase quality.

Lovely neat job. Looks great.

Thank you mate for your review, I’m doing exactly what you did when putting it on 👍🏻👍🏻

Looking good,good tip about the clamps and airblower. 👍👍👍

Decent job! Just got one for mine, shocking how it doesn’t fit perfectly out the box considering the price! Think im going to bond mine on especially round the bends OR heatgun it so its flush before using the tape!

@CarRambles

5 жыл бұрын

I agree completely. They need to hire a new mold guy or somehow make a better way of producing these in general. The design and actual quality of the product is nice! It's a shame about fitment

Good pal, I tiger sealed mine on, and then sealed the gap with colour coded 3m trim tape, good vids

@CarRambles

5 жыл бұрын

Yeah every mod I do I wanna make it so I can go back to standard and not damage paintwork, we will see how long it lasts :) thanks for watching!

Hi just bought one for my focus MK2 zetec s which from factory has st rear spoiler would think for price they would paint back gloss black aswell

That was a much better fit than I thought, looks awesome! you wrap your wing mirrors or just buy black caps ?

@CarRambles

5 жыл бұрын

Just bought black mirror caps, think they are like £30 a pair? eBay specials but fit great. Thanks for watching :)

Fitted one and added 15bhp Jokes it adds a nice touch to my st260

Nice vid! How is it holding on? Confident it'll stay on proper with just the tape?

@CarRambles

5 жыл бұрын

Yeah not too bad. Will have to reset it one day as it's come up slightly but it's solid still.

Looks good installed but mark my words it will pop up at edges in no time. I have one installed.!!!! Removed it and put 3m VMB tape to fix it. Keep an eye on it..soon or within a couple of month's you will see light thru where it does not fit correctly......you may be lucky but it's a crap fit really..Maxton could have done a better job with it but it looks great.. Also I fitted mime in slightly (not in line with the end /back of the spoiler) and it fits better with the ends of the lip meeting the contour of the side of the spoiler better. So if you ever have to remove because it becomes unstuck keep this in mind. Keep up the video's. Great content.. fiesta st rock's

@CarRambles

5 жыл бұрын

Thank you for taking the time to write this. I'll be sure to keep you all up to date if it does start to pop up. Love the design. Just wish they could mold better.

@philmufc1

5 жыл бұрын

If it comes loose does it leave marks on the spoiler? If so do they come off easily?

@CarRambles

5 жыл бұрын

@@philmufc1 I have no idea so far, mine came up a little bit so may remove it and refit. If it does come off I'll let you know and reply here. I doubt it will mark and you can get sticky residue off with citrus wash

@philmufc1

5 жыл бұрын

Car Rambles thanks mate

@ferhatovic86

2 ай бұрын

​@CarRambles did it last long now that its been 5 years?

Will this spoiler lip fit for a ford focus too or is it just for a fiesta?

@CarRambles

5 жыл бұрын

Tbh it barely fits the fiesta without it coming up after awhile.... I'm really not sure if it would fit or not :/ sorry

Thought about getting it bonded?

@CarRambles

5 жыл бұрын

Na everything I do to my car I want it to be removable without damaging the paint

Have you stuck your spoiler lip back down mate?

@CarRambles

5 жыл бұрын

Not yet mate been at work all day. It hasn't come up bad enough that it has to be removed

did you ever have any problems with this only being stuck on with 3m tape , like did ever come loose and did you need to re stick it ?

@CarRambles

Жыл бұрын

Never had 1 problem, use proper tape and youll have no problem

@ollie8952

Жыл бұрын

@@CarRambles double sided tape ?

Saw your vid on Instagram where the spoiler lip has come loose :( I have one don’t know whether to install now because it might come loose :(

@CarRambles

5 жыл бұрын

Give it a try, if it starts to come up you can always just reinstall it :) not the end of the world it's only tape you need :)

These maxton add ons are just about passable on black and grey cars. On any other colour car it literally looks like the car has been driven through halfords covered in superglue.

I screwed mine on so no little toerag can steel it 😡

you need a real heat gun to pre fit it firstly. Slowly heat it, keep heat moving..it takes longer than you u think to get it heated thru without scorching it..the edges will lay and fit the curve with a little pushing. then you use a primer 44 pen on the spoiler after its been rubbed a few cycles with alcohol (90+% isopropyl) to cut any wax. strip one inch squares at the ends and in the middle of the lip, bending back the tape covering so its easy to pull once in place. fit it, stick it in those 3 spots. look good? tape it down with masking tape, pull the cover strips from the double-sided and press each area of the lip for about 30 straight seconds to activate the pressure sensitive adhesive properly. give it one last light heat to help it settle any remaining tension and it'll stay on for 10yrs. the way this video did it, that lip will lift-off in a few years or less, sorry bro. thx for the vid tho