Your level of planning and attention to detail is really something! Excellent work!

OMG how did i miss this!

Impressive. Very good ideas. Definitely eye candy. Very premium but balanced. Thanks to Chinese manufacturing we can affort these niceties

@NEWTechCreative

11 ай бұрын

Thank you! Yes… I couldn’t do without it 😂

Why's the music so loud compared with your voice?

@NEWTechCreative

Жыл бұрын

Sorry! I need new headphones…. It sounded fine before uploading. I’ll buy new ones before next video.

@Marcus_Caius

Жыл бұрын

Yes very annoying, have to decrease and increase volume each time you play music :(

@JD_Manufacturing

11 ай бұрын

It's fine. Sounded good to me.

I really enjoy these series. Could you please make a video about setting up macros in Fluid NC?

@NEWTechCreative

Жыл бұрын

Thank you!! I did briefly include macros in my fluidnc wiring video…. Let me know if any specifics!

Very nice channel ❤

i made under beam led light similar but i use ready to use aluminium U-profile were have channel bush in led. light strip and top profile have diffuser plastic. cost 4$ only/meter , and easy install some screw to beam.

@NEWTechCreative

3 ай бұрын

Thanks for sharing! Yes this is definitely an easier option 😂😂 I often reinvent the wheel 👍👍

I really like the look of it. However I have some thoughts on safety. The WS2812 LEDs flicker at a really high frequency. That's not a problem in normal lightning but in machining it can lead to the spindle looking like it's standing still eventhough it's not. That's why there are actually norms on lightning in workshops. At least in Germany that's a thing. This is a hobby build so you obviously don't have to conform to industry safety stadarts but it might be a nice safety addition, that the lights that shine directly onto the machine surface get turned off when the spindle is spinning and a relay turns on some regular white leds that have a big capacitor in parallel.

Hi Friend, congratulations, as you told me a few days ago. Onwards and upwards

@NEWTechCreative

Жыл бұрын

Thank you!! Hope your build is going smoothly! 🤩🤩

Considder using geckodrives for the stepper drivers. Thet are silky smooth for steppers and improve steppers to the point where they are more like servo motors because they have an adjustable pot for quiting the pulsetrain. I will never go back to standard stepper drivers.

@NEWTechCreative

11 ай бұрын

Thanks for your comment! I have heard of the geckodrives, however never tried! I will certainly keep in mind. I have already purchased some other goodies that will solve my stepper driver issues… stay tuned 🤩🤩

Cool machine! How will you detect the dust level? Just ordered Root controller using your coupon code, thanks!

@NEWTechCreative

Жыл бұрын

A secret that I will show in upcoming videos 😊😊 feel free to join my discord if you want to help me develop it!! discord.gg/gdkz2Ghy

@RootCNC

Жыл бұрын

❤❤❤

Dang! I ordered the Root Controller before seeing your code. :) Oh well. How much did the PCB Way parts cost?

@NEWTechCreative

Жыл бұрын

You won’t regret buying!!! Fantastic controller 🤩🤩 you would have to submit a sample file to PCB way to check a quote for pricing 😁😁

@keheha

Жыл бұрын

@@NEWTechCreative "if you have to ask, you probably can't afford it" 😆

Ahh shit, just saw the video today after killing my DIY CNC Controller yesterday. Any chance you get another coupon code? I would really like to support your channel through my purchase.

@NEWTechCreative

10 ай бұрын

Sorry to hear that Tom!! Unfortunately the promo code has now expired, however I really appreciate you reaching out and supporting. Root controller is an amazing board if you end up getting your hands on one 🤩🤩🤩

How do we get the discord link?

@NEWTechCreative

6 ай бұрын

For the fluidnc discord - check out the wiki for info. You are welcome to join my discord at discord.gg/WP9ZjkY9

AWWWW, I am just about to buy a Roots Controller but the deal is over :( :( :(

@NEWTechCreative

10 ай бұрын

Sorry you missed out!! It’s totally worth the purchase no matter!

Any plans to release Matilda to the public?

@NEWTechCreative

Жыл бұрын

Should be available in the next month!!

You need to stop this, so I'm going to get addicted to your channel.... kkkkkk

@NEWTechCreative

Жыл бұрын

Thanks Alexon 🤩🤩

​@NEWTechCreative Fantastic Machine. Congratulations! Plans are already available for purchase it? Also, I can get the link to discord to work

Discord link seems to be invalid?

@NEWTechCreative

Жыл бұрын

Oh no!! Is that the fluidnc discord?

@marccretten

Жыл бұрын

@@NEWTechCreative yeah its the one listed above

@NEWTechCreative

Жыл бұрын

Ah! Thanks for letting me know… they are valid for 30days. I’ve refreshed the link to my discord! Thank you 🙏

@marccretten

11 ай бұрын

@@NEWTechCreative Link is working perfect!

Love the videos, but the interstitial music is abusively loud and obnoxious by comparison to the dialogue which is the real value!

@NEWTechCreative

8 ай бұрын

Thanks for your feedback Tristan! Unfortunately I can change once uploaded, however have improved on my latest video 🤩🤩

@TristanJCumpole

8 ай бұрын

@@NEWTechCreative No worries. I wasn't certain whether it was the aesthetic you were aiming for with your KZread channel or not, however pumping sidechained compressor-style music does have a drastic apparent volume difference between it and the (higher priority) informational dialogue. It's a ballache having to change volume level between segments. You've got a new sub from me, because this project is very much a parallel with my smaller format precision CNC. I found you as I am initially setting it up with FluidNC, perhaps a Masso G3 Touch later. I've gone fixed gantry for stability, and so that I can add fixed chip curtains across the Y axis....

@NEWTechCreative

8 ай бұрын

Thanks for you tips and subbing Tristan! Would be great to see your build 🤩

only what i need my DIY machine have this biggest and better spindle. all other have same, motors, but i use DM 556 drivers can use biggest possiple nema 23 motors. and i use old cheap paraller port 10$ controller board, cheap and can use 2 paraller port easy, usb port controller have all too lot problems and not can use safety REALTIME controller. mesa card whit ethernet have perfect but too expensive hobby user and DIY builders.

@NEWTechCreative

3 ай бұрын

Nice! Yes the 2.2kw make a huge difference! So many options for controllers these days!

This is just iPhone Costly copy of Openbuilds

@NEWTechCreative

9 ай бұрын

Thanks iPhone

@mattivirta

3 ай бұрын

iphone not any use, all use only cheapen and better android. Openbuild cnc have owerprice expensive, ewery men can build DIY better cnc machine 4x cheapen, or same hardware machine 6x cheapen. better motors big, cheapen and better controller, linuxcnc software best safety and real time controll, dont waste time windows software not safe and real time controll, and not flexiple build own additional systems to machine, MGP, relays, own controll panel, display modifications, ATC, etc many linuxcnc can do all this, all other old GRBL or mach3 software not can.