Love it - Its great to see the Root Controller out in the wild! keep up the good work!

the video quality is good, fun to watch

Great job, wish I could do the same.

Awsome work! Do you have by any chance some bom, wiring diagram... that you could share?

@kyy-_-

2 ай бұрын

Thanks and sorry for a late reply! I don't have any wiring diagrams unfortunately.

Very nice my dude but you gotta wear safety glasses we only get 2 eyebulbs

Is the VFD controller extender just friction fit? Awesome work btw!

@kyy-_-

Ай бұрын

Thanks! Yes, with some additional snap tabs.

Why do most people choose to put the VFD inside the same cabinet where the controller and steppers are located? Doesn't this allow EMF to affect the electronics?

@kyy-_-

15 күн бұрын

I think it comes down to cost and ease of wiring. But yes, if one does not use properly grounded shielded wires, then it might be a problem, though I've both seen and used myself non groubded wires wirh VFD right next to the stepper drivers without an issue. IMO the EMI issue meme has grown to be much of a bigger issue in online discussions than it actually is in practice. In most setups the location of the inverter is not the actual issue.

Can you provide a link to the cooling system you used for the spindle ?

@kyy-_-

2 ай бұрын

It's regular PC water cooling parts, most of it I bought used.

Where did you purchase your spindle cooling system?

@kyy-_-

7 ай бұрын

It's just common PC water cooling parts controlled with the VFD's DRV port so the fan and pump is only on when the spinde is actually running. If you've got the regular chinese 2,2kw spindle you'll want to upgrade the ports to M8x1 to 10mm in order to use 10mm ID hose instead of the standard 6mm hose.

@graveurgraveur2691

7 ай бұрын

Thanks!@@kyy-_-

interested by these din rail clip ^^ mind sharing the files ? :p

Where do you get the mounting brackets for the motor controllers?

@kyy-_-

7 ай бұрын

Drew in Fusion and then 3D printed. There's also some other printable models in thingiverse ect.

@skinnymouse1410

7 ай бұрын

Seems like your design has heated inserts. Super cool!

@Chadwoodworker

6 ай бұрын

⁠@@kyy-_-Nice design would you consider uploading this to thingaverse?

@keheha

Ай бұрын

@@kyy-_- did you experience any deformation of printed DIN rail brackets due to stepper driver heat dissipation?

@kyy-_-

Ай бұрын

@@keheha I haven't yet. I wouldn't suggest in printing those in PLA, cause then those will deform. ABS works well, that's what I used.

Exactement le genre de vidéo qui n'apporte rien mais vraiment rien sauf pour le mec qui se gratte le nombril

@kyy-_-

Ай бұрын

Sacré bleu!

Awsome work! Do you have some bom, wiring diagram... that you could share?

@kyy-_-

2 ай бұрын

Thanks! Unfortunately no :(

@grandmastersreaction1267

Ай бұрын

@@kyy-_- I would pay for a wiring diagram

@mciarlillo1309

Ай бұрын

@@grandmastersreaction1267you can probs use the PrintNC wiring diagram for reference