Mastering PVC Trim Installation: 4 Tips for Azek Trim Around Your Home! | CARPENTER’S TOUCH
Are you planning to install PVC trim, specifically Azek, around your house? Don't miss these crucial tips! In this video, we share four expert recommendations to ensure a flawless installation, helping you achieve a professional and long-lasting finish for your home exterior.
#pvc #azek #diy #carpenterstouch
Пікірлер: 17
Thank you.
So bonding the joints with that glue doesn't cause any expansion/contraction issues? If they are bonded they won't be able to expand contract, that doesn't cause fasteners to pull out or buckling due to the inability to move?
I am planning to use Azek for fascia and rake on a gable house. Since I’ll be working alone My plan is to glue up all my 45 degree corners and attach them first then I will fill in between with straight cuts Should I use butt joint or should I bevel on a 45 when attaching the straight sections?. Bevel will make glueing much easier as with a butt the glue would glue out when sliding a tight fit in.
@carpentertouch
9 ай бұрын
Bevel on a 45 degree is the best option
@Beenthere5409
6 ай бұрын
A glued together butt joint would be more natural looking and a shorter seam to somewhat conceal. Sometimes a good rule of thumb is: “If it’s not a 45, don’t make it one.”
@als1023
Ай бұрын
@@Beenthere5409 I have done it both ways , small 45's are OK, example light boxes in a stone wall on a driveway. The comment about the shorter length joint is valid . I also run a screw into the joint if that edge is covered, for extra insurance, more difficult on a butt joint.
Is there anyway to make the seam between the butt joint seamless, or smooth like 1 piece
@carpentertouch
11 ай бұрын
None because the boards are 12 ft long .. and if your wall is 20ft long … you will have a seam
My concern is there is no need to use any J. But how does the water stay out?
@themeyerk9
3 ай бұрын
This is a concern of mine as well. Interested in his response. Planned on using Azek trim with alside ascend (installs like vinyl with J), but using a rabbited piece of Azek trim will still allow water behind the cladding. So I’m thinking I have to build the trim out enough with another piece of pvc behind it so I can fit the j channel underneath the Azek rabbit.
Ding not Dink
@carpentertouch
2 ай бұрын
North Jersey or South Jersey talk and phrases u choose one lol
@richardmckrell4899
2 ай бұрын
@@carpentertouch It's Ding everywhere
@davethomas9499
Ай бұрын
@@carpentertouchWe say donk around here.
@-velius
Ай бұрын
Dunk
@honus64
13 күн бұрын
Doink