In this video I show the process of making a marquetry optical illusion box. It is about making marquetry, string inlay, inlay banding, veneering and fine woodwork.
Жүктеу.....
Пікірлер: 117
@RobRobertson10008 ай бұрын
Thank you Ronnie, you are such an encouragement to us budding woodworkers mate.
@ronnie_rozenga
8 ай бұрын
You're welcome Rob, that's nice to hear
@peterdewitt8585
8 ай бұрын
I second this! This is on of the most beautiful and intricate builds I have seen. The video presentation shows the build in a way that demonstrates your skill and experience and that with patience and focus others could learn to do the same. This video has me wanting to clear off my bench and start learning some new skills!
@RPBasilio8 ай бұрын
Opened KZread and saw a new video???? It’s like my Birthday and Christmas all in one! 🎉🎉 welcome back!
@ronnie_rozenga
8 ай бұрын
Hahaha, you're welcome! Happy birthday and merry christmas😅
@marshallgeller80258 ай бұрын
You have the hands of a surgeon. Absolute perfection.
@ronnie_rozenga
8 ай бұрын
Thank you Marshall !
@DownhillAllTheWay8 ай бұрын
I hope the recipient doesn't look at it thinking "It's like a cigar box", but appreciates the time, patience and craftsmanship that went into it. I feel enriched, just having watched the video.
@ronnie_rozenga
8 ай бұрын
Thank you Mike
@1deerndingo8 ай бұрын
Nice to see you are back. It is always good to see one of your videos. They are the type of video I study, time and time again, rather than just watch. Thank you
@ronnie_rozenga
8 ай бұрын
You're welcome ! Very nice to hear this!
@rizzidepizzi8 ай бұрын
Mooi! Never saw a video by you, this was a well spent 21 minutes, Thx for displaying your craftmanship!
@ronnie_rozenga
8 ай бұрын
Thank you, very nice to hear !
@garygenerous89828 ай бұрын
That is a absolutely gorgeous. Seriously beautiful as hell.
@ronnie_rozenga
8 ай бұрын
Thank you very much !
@wallystoolshed70508 ай бұрын
Stunning!
@ronnie_rozenga
8 ай бұрын
thank you very much !
@montewoods47668 ай бұрын
Glad you’re back. Great build
@ronnie_rozenga
8 ай бұрын
Thank you !
@VinceEspositoJr8 ай бұрын
Unbelievably beautiful.
@ronnie_rozenga
8 ай бұрын
Thank you Vincent !
@muebleshojasdemadera8 ай бұрын
Such an inspiration Ronnie!
@ronnie_rozenga
8 ай бұрын
Very nice to hear Francisco !
@todds41018 ай бұрын
New subscriber here. I usually don't but it's great to see a great craftsman. I work part-time at a local Woodcraft and we often cringe when someone says "I saw this on KZread." A lot of them out there, but you are the real deal. And great job on this project! Beautiful work!!!
@ronnie_rozenga
8 ай бұрын
Thank you very much Todd ! I am honored that you subscribed !
@TomTom31ify8 ай бұрын
Beautiful. Glad you're back on KZread.
@ronnie_rozenga
8 ай бұрын
Thank you !
@andreisiamionau37528 ай бұрын
Absolutely stunning work! Thank you very much for the detailed illustration of the process as well as writing the essential features of the job.
@ronnie_rozenga
8 ай бұрын
Thank you very much ! Nice to hear !
@broomeco.81218 ай бұрын
Masterful. Thanks for posting this
@ronnie_rozenga
8 ай бұрын
Thank you ! You're welcome
@greggclaycamp68106 ай бұрын
Beautiful work!
@ronnie_rozenga
6 ай бұрын
Thank you Gregg !
@giorgioconcardi69804 ай бұрын
As always : Wonderful
@ronnie_rozenga
4 ай бұрын
Thank you Giorgio !
@user-cg7oz7pk4c3 ай бұрын
Höchsten Respekt , alles wunderbar was für eine Präzision.
@ronnie_rozenga
3 ай бұрын
Thank you very much Alf !
@TheMadManPlace8 ай бұрын
Mind-blowing craftsmanship and attention to detail. Thank you for sharing with us.
@ronnie_rozenga
8 ай бұрын
You're welcome ! Thank you for watching !
@user-mx2wk6ih5b8 ай бұрын
Вы большой мастер! Спасибо за видео!
@ronnie_rozenga
8 ай бұрын
You're welcome, thanks for the compliment!
@mitymous18 ай бұрын
stunning!
@ronnie_rozenga
8 ай бұрын
Thank you !
@andrewkonopitski79398 ай бұрын
Incredible work as always! Thanks for taking the time to put together such a well edited video.
@ronnie_rozenga
8 ай бұрын
Thank you Andrew, nice to hear you like the video
@dk24286 ай бұрын
Amazing, i'm in awe of such craftsmanship! New sub!
@ronnie_rozenga
6 ай бұрын
Thank you very much !
@jimrosson67028 ай бұрын
Absolutely beautiful amazing work
@ronnie_rozenga
8 ай бұрын
Thank you Jim !
@DIYCHURCHPROJECTS8 ай бұрын
Astonishing craftsmanship.
@ronnie_rozenga
8 ай бұрын
Thank you very much !
@Hichamhasan8 ай бұрын
Extremely well executed, truly mesmerizing. Keep up the good work 👏👍
@ronnie_rozenga
8 ай бұрын
Thank you Hicham, I will do so !
@uncannyvalleywoods72488 ай бұрын
So hot! Every time I think I've improved my marquetry I watch one of your vids and realize I may as well be a potato with a dull pocket knife.
@ronnie_rozenga
8 ай бұрын
Thank you ! But it can't be that bad 😅
@markscheiner39528 ай бұрын
Nicely done as always Ronnie
@ronnie_rozenga
8 ай бұрын
Thank you Mark !
@lalalala32676 ай бұрын
Incredible craftsmanship
@ronnie_rozenga
6 ай бұрын
Thank you !
@shanearnold10718 ай бұрын
Thank you for your videos.
@ronnie_rozenga
8 ай бұрын
You're welcome Shane
@ping1708 ай бұрын
I love you shaper fence 👍 And also, this box is awesome 😉
@ronnie_rozenga
8 ай бұрын
Thank you very much !
@scott10998 ай бұрын
very nice - excellent craftsmanship
@ronnie_rozenga
8 ай бұрын
Thank you Scott
@hansnorbart8 ай бұрын
Ziet er geweldig mooi uit. Fijn dat je na twee jaar weer een video hebt geplaatst. Ik heb mij gelijk geabonneerd.
@ronnie_rozenga
8 ай бұрын
Dankjewel ! Leuk dat je je geabonneerd hebt !
@thewoodworker1066 ай бұрын
Awesome work
@ronnie_rozenga
6 ай бұрын
Thank you !
@xstnl588625 күн бұрын
Incredible craftmanship
@ronnie_rozenga
24 күн бұрын
Thank you !
@colmrafferty52578 ай бұрын
Superb craftsmanship
@ronnie_rozenga
8 ай бұрын
Thank you Colm !
@florenthuck45398 ай бұрын
Sacret travail chapeau bien bas.
@ronnie_rozenga
8 ай бұрын
Thank you Florent !
@Offshoreorganbuilder5 ай бұрын
Outstanding.
@ronnie_rozenga
5 ай бұрын
Thank you !
@user-ev2xh7kf3j27 күн бұрын
Perfect 👍
@ronnie_rozenga
27 күн бұрын
Thank you !
@allannielsen47528 ай бұрын
Thanks for sharing such beautiful work, and welcome back, been a long time admirer of your work, especially the Jay-bird cabinet. Love this style of video too, no noise, no hype, just down to earth amazing craftsmanship. Any chance you can do one with just a little explaining in it? i.e. I assume you cut the letter out on the scrollsaw at an angle so the wedge would fit?
@ronnie_rozenga
8 ай бұрын
Thank you very much ! Yes, my scroll saw table is tilted a few degrees. Then the pieces get a wedge- shape so there is no saw gap.
@paulojusinskas40723 ай бұрын
Magnificent
@ronnie_rozenga
3 ай бұрын
Thank you Paulo !
@djmoulton15588 ай бұрын
Phenomenal design and execution. It would have been nice to know how you finished it.
@ronnie_rozenga
8 ай бұрын
Thank you ! The finish is a part I kept out of the video. In this case I used a acrylic varnish to finish the box. Maybe I will pay attention to the finishing process in a next video.
@leelucas19118 ай бұрын
Beautiful
@ronnie_rozenga
8 ай бұрын
Thank you !
@anthonyvdh8 ай бұрын
Amazing! Would love to see to see some more teaching style videos... where you share your thinking, approach, choices you make/tradeoffs, etc.
@ronnie_rozenga
8 ай бұрын
Thank you, I will do so in my next videos ! (It can take a while though..)
@anthonyvdh
8 ай бұрын
@@ronnie_rozenga Thanks! I would also be interested to know how you deal with the hole you pre drill for the blade.
@ronnie_rozenga
8 ай бұрын
@@anthonyvdh Most of the time the hole is hardly visible because the pieces are pressed in pretty tight. Is the hole still visible after glue- up, I make my own wood filler, using sanding dust from the correct wood mixed with Frencken Cellocol . After sanding the marquetry the repair is hardly visible.
@WTCreations8 ай бұрын
Stunning as usual Ronnie, with great craftsmanship and a beautiful end result. How durable, and deep is the sand shading, do you have to be careful when finishing sanding not to lose the effect? Long time between videos but well worth the wait.
@ronnie_rozenga
8 ай бұрын
Thank you Wayne ! The shading is pretty deep. It decreases slightly during sanding, but there is enough left. Thick veneer is hard to shade, it has to stay longer in the sand, therefore it often causes distortion. I had to resaw some parts after shading.
@carolrasmussen72698 ай бұрын
fantastic
@ronnie_rozenga
8 ай бұрын
Thank you !
@TurkiAU8 ай бұрын
Simply, an amazing peice of art 👏
@ronnie_rozenga
8 ай бұрын
Thank you very much !
@ericmlt2 ай бұрын
ce mec est juste genial , je te kif mec ^^
@ronnie_rozenga
2 ай бұрын
Thank you very much !
@ericmlt
2 ай бұрын
@@ronnie_rozenga non c'est juste reconnaitre
@magcolor8 ай бұрын
👍👍👍👍👍
@ronnie_rozenga
8 ай бұрын
Thank you !
@thaynegouse5768 ай бұрын
What thickness is the veneer you are using in the double bevel? also what size blade are you using on the scroll saw? And at what angle? The sawing of that initial was very impressive! The entire video is excellent. Thanks for sharing it with us.
@ronnie_rozenga
8 ай бұрын
Thank you ! I normally use 3mm thick veneer, the blades are Pebeco 3, 130x0,8x0,34mm. With this veneer thickness and these saw blades, the table is tilded about 7 degrees. But you have to make some test pieces to find the exact angle.
@matthewjason53306 ай бұрын
Wow
@ronnie_rozenga
6 ай бұрын
Thank you Matthew !
@adamyarian79678 ай бұрын
Great work! Could you provide details on the plane used at your shooting board??
@ronnie_rozenga
8 ай бұрын
Thank you ! It is a Lie Nielsen no9 mitre plane. As far as I know it is no longer made unfortunately...
@rozzell22618 ай бұрын
Can you tell me where you got your hand plane for your shooting board?
@ronnie_rozenga
8 ай бұрын
I bought the plane a few years ago at a store here in the Netherlands, called Baptist. I was lucky because it was the last one they had in stock. It is a Lie Nielsen no.9 Mitre plane, as far as I know they are no longer made and you can only find them second hand (for a hefty price....)
@dodgersfnshepard86732 ай бұрын
Jaw dropped and im not half way through yet
@ronnie_rozenga
2 ай бұрын
Thank you !
@fladoodel5 ай бұрын
how much does a box like this cost?
@ronnie_rozenga
5 ай бұрын
I made this one for a friend, I did not count the hours.
@fladoodel
5 ай бұрын
theoretically if someone commissioned one from you what would you charge?@@ronnie_rozenga
Пікірлер: 117
Thank you Ronnie, you are such an encouragement to us budding woodworkers mate.
@ronnie_rozenga
8 ай бұрын
You're welcome Rob, that's nice to hear
@peterdewitt8585
8 ай бұрын
I second this! This is on of the most beautiful and intricate builds I have seen. The video presentation shows the build in a way that demonstrates your skill and experience and that with patience and focus others could learn to do the same. This video has me wanting to clear off my bench and start learning some new skills!
Opened KZread and saw a new video???? It’s like my Birthday and Christmas all in one! 🎉🎉 welcome back!
@ronnie_rozenga
8 ай бұрын
Hahaha, you're welcome! Happy birthday and merry christmas😅
You have the hands of a surgeon. Absolute perfection.
@ronnie_rozenga
8 ай бұрын
Thank you Marshall !
I hope the recipient doesn't look at it thinking "It's like a cigar box", but appreciates the time, patience and craftsmanship that went into it. I feel enriched, just having watched the video.
@ronnie_rozenga
8 ай бұрын
Thank you Mike
Nice to see you are back. It is always good to see one of your videos. They are the type of video I study, time and time again, rather than just watch. Thank you
@ronnie_rozenga
8 ай бұрын
You're welcome ! Very nice to hear this!
Mooi! Never saw a video by you, this was a well spent 21 minutes, Thx for displaying your craftmanship!
@ronnie_rozenga
8 ай бұрын
Thank you, very nice to hear !
That is a absolutely gorgeous. Seriously beautiful as hell.
@ronnie_rozenga
8 ай бұрын
Thank you very much !
Stunning!
@ronnie_rozenga
8 ай бұрын
thank you very much !
Glad you’re back. Great build
@ronnie_rozenga
8 ай бұрын
Thank you !
Unbelievably beautiful.
@ronnie_rozenga
8 ай бұрын
Thank you Vincent !
Such an inspiration Ronnie!
@ronnie_rozenga
8 ай бұрын
Very nice to hear Francisco !
New subscriber here. I usually don't but it's great to see a great craftsman. I work part-time at a local Woodcraft and we often cringe when someone says "I saw this on KZread." A lot of them out there, but you are the real deal. And great job on this project! Beautiful work!!!
@ronnie_rozenga
8 ай бұрын
Thank you very much Todd ! I am honored that you subscribed !
Beautiful. Glad you're back on KZread.
@ronnie_rozenga
8 ай бұрын
Thank you !
Absolutely stunning work! Thank you very much for the detailed illustration of the process as well as writing the essential features of the job.
@ronnie_rozenga
8 ай бұрын
Thank you very much ! Nice to hear !
Masterful. Thanks for posting this
@ronnie_rozenga
8 ай бұрын
Thank you ! You're welcome
Beautiful work!
@ronnie_rozenga
6 ай бұрын
Thank you Gregg !
As always : Wonderful
@ronnie_rozenga
4 ай бұрын
Thank you Giorgio !
Höchsten Respekt , alles wunderbar was für eine Präzision.
@ronnie_rozenga
3 ай бұрын
Thank you very much Alf !
Mind-blowing craftsmanship and attention to detail. Thank you for sharing with us.
@ronnie_rozenga
8 ай бұрын
You're welcome ! Thank you for watching !
Вы большой мастер! Спасибо за видео!
@ronnie_rozenga
8 ай бұрын
You're welcome, thanks for the compliment!
stunning!
@ronnie_rozenga
8 ай бұрын
Thank you !
Incredible work as always! Thanks for taking the time to put together such a well edited video.
@ronnie_rozenga
8 ай бұрын
Thank you Andrew, nice to hear you like the video
Amazing, i'm in awe of such craftsmanship! New sub!
@ronnie_rozenga
6 ай бұрын
Thank you very much !
Absolutely beautiful amazing work
@ronnie_rozenga
8 ай бұрын
Thank you Jim !
Astonishing craftsmanship.
@ronnie_rozenga
8 ай бұрын
Thank you very much !
Extremely well executed, truly mesmerizing. Keep up the good work 👏👍
@ronnie_rozenga
8 ай бұрын
Thank you Hicham, I will do so !
So hot! Every time I think I've improved my marquetry I watch one of your vids and realize I may as well be a potato with a dull pocket knife.
@ronnie_rozenga
8 ай бұрын
Thank you ! But it can't be that bad 😅
Nicely done as always Ronnie
@ronnie_rozenga
8 ай бұрын
Thank you Mark !
Incredible craftsmanship
@ronnie_rozenga
6 ай бұрын
Thank you !
Thank you for your videos.
@ronnie_rozenga
8 ай бұрын
You're welcome Shane
I love you shaper fence 👍 And also, this box is awesome 😉
@ronnie_rozenga
8 ай бұрын
Thank you very much !
very nice - excellent craftsmanship
@ronnie_rozenga
8 ай бұрын
Thank you Scott
Ziet er geweldig mooi uit. Fijn dat je na twee jaar weer een video hebt geplaatst. Ik heb mij gelijk geabonneerd.
@ronnie_rozenga
8 ай бұрын
Dankjewel ! Leuk dat je je geabonneerd hebt !
Awesome work
@ronnie_rozenga
6 ай бұрын
Thank you !
Incredible craftmanship
@ronnie_rozenga
24 күн бұрын
Thank you !
Superb craftsmanship
@ronnie_rozenga
8 ай бұрын
Thank you Colm !
Sacret travail chapeau bien bas.
@ronnie_rozenga
8 ай бұрын
Thank you Florent !
Outstanding.
@ronnie_rozenga
5 ай бұрын
Thank you !
Perfect 👍
@ronnie_rozenga
27 күн бұрын
Thank you !
Thanks for sharing such beautiful work, and welcome back, been a long time admirer of your work, especially the Jay-bird cabinet. Love this style of video too, no noise, no hype, just down to earth amazing craftsmanship. Any chance you can do one with just a little explaining in it? i.e. I assume you cut the letter out on the scrollsaw at an angle so the wedge would fit?
@ronnie_rozenga
8 ай бұрын
Thank you very much ! Yes, my scroll saw table is tilted a few degrees. Then the pieces get a wedge- shape so there is no saw gap.
Magnificent
@ronnie_rozenga
3 ай бұрын
Thank you Paulo !
Phenomenal design and execution. It would have been nice to know how you finished it.
@ronnie_rozenga
8 ай бұрын
Thank you ! The finish is a part I kept out of the video. In this case I used a acrylic varnish to finish the box. Maybe I will pay attention to the finishing process in a next video.
Beautiful
@ronnie_rozenga
8 ай бұрын
Thank you !
Amazing! Would love to see to see some more teaching style videos... where you share your thinking, approach, choices you make/tradeoffs, etc.
@ronnie_rozenga
8 ай бұрын
Thank you, I will do so in my next videos ! (It can take a while though..)
@anthonyvdh
8 ай бұрын
@@ronnie_rozenga Thanks! I would also be interested to know how you deal with the hole you pre drill for the blade.
@ronnie_rozenga
8 ай бұрын
@@anthonyvdh Most of the time the hole is hardly visible because the pieces are pressed in pretty tight. Is the hole still visible after glue- up, I make my own wood filler, using sanding dust from the correct wood mixed with Frencken Cellocol . After sanding the marquetry the repair is hardly visible.
Stunning as usual Ronnie, with great craftsmanship and a beautiful end result. How durable, and deep is the sand shading, do you have to be careful when finishing sanding not to lose the effect? Long time between videos but well worth the wait.
@ronnie_rozenga
8 ай бұрын
Thank you Wayne ! The shading is pretty deep. It decreases slightly during sanding, but there is enough left. Thick veneer is hard to shade, it has to stay longer in the sand, therefore it often causes distortion. I had to resaw some parts after shading.
fantastic
@ronnie_rozenga
8 ай бұрын
Thank you !
Simply, an amazing peice of art 👏
@ronnie_rozenga
8 ай бұрын
Thank you very much !
ce mec est juste genial , je te kif mec ^^
@ronnie_rozenga
2 ай бұрын
Thank you very much !
@ericmlt
2 ай бұрын
@@ronnie_rozenga non c'est juste reconnaitre
👍👍👍👍👍
@ronnie_rozenga
8 ай бұрын
Thank you !
What thickness is the veneer you are using in the double bevel? also what size blade are you using on the scroll saw? And at what angle? The sawing of that initial was very impressive! The entire video is excellent. Thanks for sharing it with us.
@ronnie_rozenga
8 ай бұрын
Thank you ! I normally use 3mm thick veneer, the blades are Pebeco 3, 130x0,8x0,34mm. With this veneer thickness and these saw blades, the table is tilded about 7 degrees. But you have to make some test pieces to find the exact angle.
Wow
@ronnie_rozenga
6 ай бұрын
Thank you Matthew !
Great work! Could you provide details on the plane used at your shooting board??
@ronnie_rozenga
8 ай бұрын
Thank you ! It is a Lie Nielsen no9 mitre plane. As far as I know it is no longer made unfortunately...
Can you tell me where you got your hand plane for your shooting board?
@ronnie_rozenga
8 ай бұрын
I bought the plane a few years ago at a store here in the Netherlands, called Baptist. I was lucky because it was the last one they had in stock. It is a Lie Nielsen no.9 Mitre plane, as far as I know they are no longer made and you can only find them second hand (for a hefty price....)
Jaw dropped and im not half way through yet
@ronnie_rozenga
2 ай бұрын
Thank you !
how much does a box like this cost?
@ronnie_rozenga
5 ай бұрын
I made this one for a friend, I did not count the hours.
@fladoodel
5 ай бұрын
theoretically if someone commissioned one from you what would you charge?@@ronnie_rozenga
Маркетри
@ronnie_rozenga
4 күн бұрын
👍