you really got my attention when I saw the moor jig borer # 1 1/2 and then saw your in Poland. I ran a Moore #3 Jig grinder for 30 years. I was very impressed to see you using it what would be considered a home shop. Keep up the good work. I live in Anchorage, Alaska, USA, but did all my gig grinding in Chicago Illinois.

Od samego rana czekałem aż ktoś doda jakiś filmik. Dziękuję za miło spędzony czas i szczęśliwego nowego roku.

@WorkshopFromScratch

5 ай бұрын

Dziękuję 😁 Również życzę Szczęśliwego Nowego Roku 😀 Pozdrawiam

I don't have a bike, but I really like your lift. It's versatile, and strong enough to handle anything. Thanks for sharing.

I love how you build things from scratch that I couldn't even build with a kit, a video manual, and a helper.

@WorkshopFromScratch

5 ай бұрын

Thank you 😁 But I think you overestimate my skills, I'm sure you can handle it just like me or even better 😃

Great video. Soon you will add a trap door to ease in rear wheel removal, and a scissor lift for raising the rear wheel off the platform. Excellent build. Great showcase for the step drill! Thanks for sharing.

@WorkshopFromScratch

5 ай бұрын

Thank you 😁

I made one of these ,out of 2x2 timber and ply cut out for dropping rear wheel out and a jack and point of leverage ,really gave me something to think about too .3 years strong and the hillbilly make up has save me thousands in repair costs and the 800 quid to buy one too.even i was amazed when it lifted a pan European ,although i tend to prop it at the front for heaver bikes

Fantastic project, always enjoy watching your builds

@WorkshopFromScratch

5 ай бұрын

Thank you 😁

OMG, I love that bandsaw. I need this in my life. Love the video and your skillset. You are very gifted!

@WorkshopFromScratch

5 ай бұрын

Thank you 😁 This bandsaw model was my dream, but unfortunately this saw is not without flaws, or I came across such a model

You are obviously a master fabricator. Great video and I will be purchasing your plans.

Great respect for making such a table, I have been thinking about making such a table for myself, and WoW, such a table, you inspire me

@WorkshopFromScratch

5 ай бұрын

Thank you 😁

Nice job. I like the safety feature that prevents the table from coming down unintended. That is missing in many DIY lifting tables I have seen.

Thanks for another great video-the build/design/editing is spot on and as always, worthy of more 👍 than I can give it. Also, thanks for an amazing 2023. A year of new designs/builds [and humor] that we've all enjoyed. Looking forward to what you have for us in 2024. Happy New Year. *God bless.*

@WorkshopFromScratch

5 ай бұрын

Thank you 😁 I also wish you a Happy New Year 😀 Regards 😀

Another excellent video and excellent job. As always off the freakin hook awesome fabrication.

Nice lift! The fact it's universal makes it even better

@WorkshopFromScratch

5 ай бұрын

Thank you 😁

Nice job I'm really impressed how sturdy it is

@WorkshopFromScratch

5 ай бұрын

Thank you 😁

👍💪 Szczęśliwego nowego roku!!

@WorkshopFromScratch

5 ай бұрын

Dziękuję 😁 Ja również życzę Szczęśliwego Nowego Roku 😀 Pozdrawiam 😀

Yep, you did it again. Another great video. Thanks for sharing.

@mddchannel9375

2 ай бұрын

Help full video

Brilliant work, dude! Really fantastic design!!! 😃 I hope you had a great Christmas! Happy new year! And stay safe there with your family! 🖖😊

@WorkshopFromScratch

5 ай бұрын

Thank you 😁 I also wish you a Happy New Year 😀 Regards 😀

Excellent build brother!!!

@WorkshopFromScratch

5 ай бұрын

Thank you 😁

Well done! Happy New Year!

@WorkshopFromScratch

5 ай бұрын

Thank you 😁 I wish You a happy New Year too 😃

Great build! That things would be good enough to lift a Honda Goldwing... I really like the side extensions for the trike and the quad! Thx for showing and Happy New Year! 👍👍👍

@WorkshopFromScratch

5 ай бұрын

Thank you😁 I also wish you a Happy New Year 😀

That’s really cool. Wow that’s a lot of work. Thanks for the video. God bless.

@WorkshopFromScratch

5 ай бұрын

Thank you 😁

That is slick you need a set of half extension so you don’t have to reach so far to get to the engine on the trike great job

thats a really nice bild Hydraulic Lift ! thanks for sharing your video,s. happy new year. cheers ben.

@WorkshopFromScratch

5 ай бұрын

Thank you 😁 I also wish you a Happy New Year 😀

Darn nice job I’m subscribing to your channel for future builds thanks

@WorkshopFromScratch

5 ай бұрын

Thank you 😁

0:16 Дайте оскар этому АКТЁРИЩУ!!! :)

Looks like thats going to serve you for a good while!

Good job mister well done beautiful idea

@WorkshopFromScratch

5 ай бұрын

Thank you 😁

Uao bellissimo intro🤣🤣🤣; Ti faccio gli auguri di buon 2024 e che ci porti tanta fortuna e salute per continuare sempre con le nostre passioni e lavoro. CIAO AMICO MIO SEI IL MIGLIORE

@WorkshopFromScratch

5 ай бұрын

Grazie 😁 Auguro anche a voi un sereno, sano e felice Anno Nuovo 😀

awesome job

That's professional equipment.

Success! Happy new year!

@WorkshopFromScratch

5 ай бұрын

Thank you 😁 I also wish you a Happy New Year 😀

Great demonstration intro why you needed to make the lift. I was like what the flippers? This guy is not serious....the bike will be a see-saw on that airbag jack how's it even going to stand by itself, but then i realized the story behind it all😂😂😂😂

@WorkshopFromScratch

5 ай бұрын

Thank you 😁

Very nice job bud 😁😁🤘🤘

@WorkshopFromScratch

5 ай бұрын

Thank you 😁

Class 👍 love the trike 👍

@WorkshopFromScratch

5 ай бұрын

Thank you 😁

Creative video, thanks :)

Es cosa de romper barreras para lograrlo yo amo hacer estructuras y la verdad solo es impulso sin miedo 👏👍muy buena rampa para moto ingenioso

Awesome again. Bro

@WorkshopFromScratch

5 ай бұрын

Thank you 😁

Awesome!.....As always!!

@WorkshopFromScratch

5 ай бұрын

Thank you 😁

Sensacional! É muita inteligência para uma pessoa só kkkk

Slick build!!!

@WorkshopFromScratch

5 ай бұрын

Thanks 😁

@davidsmith6001

5 ай бұрын

@@WorkshopFromScratch Got me to sub with the first video I watched lol

Nice Moore jig bore . I have a sip and a newall👍

@WorkshopFromScratch

5 ай бұрын

Thank you 😁

Nice build. Where did you get the adapter for the Magnetic Drill hole saws to fit a standard drill chuck?

So cool!

@mddchannel9375

2 ай бұрын

Nice video

I want one of those motorcycle flipper-overers.

Have you any roughly dimensioned drawing for this please? Great bit of kit

Happy New Year

@WorkshopFromScratch

5 ай бұрын

Thank you 😁 I also wish you a Happy New Year 😀

This is a great idea and yours turned out great. Did you make your own plans for this lift or did you purchase them? Are they for sale? Thanks for sharing.

Really nice fab work. Did you have plans or just built it from your imagination?

When I seen him drag that airbag lift out I was like. “Man that’s a sweet idea. I need one of them”. I changed my mind

@MrCarmelo1959

5 ай бұрын

Yeah dammit I got one why?? I’ll be selling it soon lol

@Scummy_shovel

5 ай бұрын

@@MrCarmelo1959 lol. Might be pretty cool on sonthing with 4 wheels. I’d still like to have one. No clue why but seems like a thing I’d have lol

@paradoxworkshop4659

5 ай бұрын

Guy throws his bike on the ground on purpose like any of those "I've got a better idea" ads, and you take it seriously? I almost stopped watching right there, but hoped he just had a few extra body labels to waste. No excuse to break stuff for "content" but also not a rare bike. Now, if it was a Hardly, he'd have earned a like and a sub!

@Scummy_shovel

5 ай бұрын

@@paradoxworkshop4659 it’s a dime a dozen old worn out Suzuki.

@paradoxworkshop4659

5 ай бұрын

@@Scummy_shovel having watched some of the other videos, I'm glad he doesn't do that old trope often. I still thought it was dumb. But I like his process. I work from drawings and specs, though, so I wish there were more dimensional details.

Looks good! HNY

This is one of the best DIY lifts I've seen. Do you sell the plans?

@WorkshopFromScratch

5 ай бұрын

Thank you 😁 The plans are available to channel supporters and on Patreon, regardless of the support level, there is access to all plans :)

MM77 Approved 👍🏼👍🏼

Jak zwykle świetna robota bardzo dobry pomysł z tym podnośnikiem super

@WorkshopFromScratch

5 ай бұрын

Dziękuje 😁

should have put a frame lift in there also, to supoort the bike when the forks are off, of it, or to lift a engine into place, but other than that, always great work

Great build!!! Excellent!! Where can I see the plans?

@WorkshopFromScratch

5 ай бұрын

Thank you 😁 Plans are available to channel supporters and on Patreon 😃

Cool build can I ask how long build took you Its a great looking bike lift 👍👍👍🏴󠁧󠁢󠁳󠁣󠁴󠁿🦕🦄😁🤞✌️

Rất kỹ thuật bạn ơi! Tay nghề giỏi quá ❤❤🚸🔔😍❤️

Bro, you can install your smart work in India, India looking for such talent

now how you going to raise the bike wheels of the stand and clamp?

Congratulations, excellent work. Is a project available?

@WorkshopFromScratch

5 ай бұрын

Thank you 😁 Tomorrow I will be available to supporters and on Patreon 😁

Зер гуд 👍

Beau projet et belle réalisation au top 👌 Est-ce que je pourrais avoir les dimensions de chaque tubes ou plan ? Merci d'avance A bientôt et encore bravo 💪🙏

Wonderful work as usual. Where do you store all these creations?

@WorkshopFromScratch

5 ай бұрын

Thank you 😁 I have all my projects in the second garage, but I'm running out of space

TOP 😊

You should add a hatch in the floor of the lift so you can change rear wheel without lifting the bike too high. Just remove the hatch and the wheel have somewhere to go.

Beautiful job sir wish I had your talent

I couldn't buy the metal to build this. I know it's all about doing it yourself and the satisfaction of it. But here in the USA, I can but a motorcycle lift and modify it for half the cost of the metal. Sad but true.

@donaldoehl7690

8 күн бұрын

It's unreal the material you can get for free with a truck and a craigslist ad; old exercise equipment, bed frames and all kinds of usable metal just for hauling it away.

!!!!!Wow it,s amazing what ya can make for us to enjoy and make for our self,s and not costing arm and leg to build it ya produce skill builds thks for sharing your project with us ya got this signed up for adventure and l got front seats is ther plan,s for this build for us or we just keep turning bk the video? From Canada 🇨🇦 Sk keep it up be waiting for more to come😊

@WorkshopFromScratch

Ай бұрын

Thank you. The plans in this video are available to supporters, no matter what level of support you choose, you can download all the projects I managed to share :)

@521farmer

Ай бұрын

@@WorkshopFromScratch thanks much for sharing l,m from Canada 🇨🇦 Sk keep you posted on this it is needed so much carry on

Good

Oh so it is you

Hello friend, do you have another cylinder like this for sale?

Maybe using diamond plate for ramps could be more secure

That intro though lol

aprox. How much PTR did you use in total?

Вот это мотивация. 😄

Elegancki podnośnik. Jeśli można wiedzieć jaki był koszt w samym materiale. Pozdrawiam

@WorkshopFromScratch

5 ай бұрын

Dziękuję 😁 Szczerze mówiąc jeszcze nie liczyłem ale bez siłownika i pompy to napewno mniej więcej 1000zł

Nadawało by sie tak pod auto ? Super robota. Pozdrawiam

@WorkshopFromScratch

4 ай бұрын

Trzeba by było powzmacniać, wymienić kółka bo te napewno by takiego ciężaru nie wytrzymały, dać jeszcze jeden siłownik i rozmieścić obydwa po bokach ramion i jakieś dodatkowe zabezpieczenie wykonać dopiero w tedy można by bezpiecznie podnosić:)

👍👍

Te najazdy które podstawiasz pod stół do wprowadzenia motocykla proponuje albo pokryć czymś antypoślizgowym albo chociaż ponacinać w kratkę szlifierka. Bo jak będą mokre albo kapnie odrobina oleju to ci się koło smyknie na bok i jeszcze cię motocykl przygniecie

@WorkshopFromScratch

5 ай бұрын

Zbrakło mi materiału i zrobiłem na szybko z tego co miałem, są za krótkie i śliskie. Dlatego nie pokazywałem ich budowy na filmie 😃

The table cost more than the motorbike? Built for a WWII half track?

Добрый день, вы в одном из видео сделали картинг. Можно ли приобрести у вас черчежи?

You can make one, for a car?

Good morning, I really like your elevator and I would like to make one, but all of you who make videos about some skill you have, never give the measurements to facilitate the assembly for a layman, could you give us the measurements? thanks

Te tuleje co wspawujesz to kupujesz czy samemu dotaczasz?

@WorkshopFromScratch

5 ай бұрын

To poprostu pocięta rura grubościenna wyczyszczona na tokarce, ale miałem za krótki jej kawałek i musiałem dotoczyć kilka sztuk :)

Podría poner las medidas con su plano

Czemu nie używasz przecinarki taśmowej, którą wykonałeś?

@WorkshopFromScratch

5 ай бұрын

Padła przekładnia, i dałem szwagrowi, który sobie wymienił przekładnie i działa do tej pory 😃

Can you email a material list and the cost of the material? I am very interested thanks good job making lift!!! 73 dan

@WorkshopFromScratch

5 ай бұрын

It is available on Patreon and for channel supporters 😃

Please sell me a set of plans for this table!

Are there plans, parts list available? Interesting, but not really useful if not.

@WorkshopFromScratch

5 ай бұрын

Plans for this project are available to channel supporters and on Patreon

Spawasz na spontanie czy najpierw projekt w Cadzie? I jak zadziala na kompie dopiero realizacja?

@WorkshopFromScratch

5 ай бұрын

Z Cadem u mnie słabo, coś potrafię ale nadal się uczę, rysuję w sketchup, ale mimo wszystko większość projektów na kanale jest wykonanych na spontanie, coś tam na kartce sobie narysowałem aby zapamiętać i tak budowałem, choć napewno lepiej i oszczędniej dla materiału wszystko narysować w programie, ale na to tęż niestety potrzebny jest czas.

@wojtkegarage1543

5 ай бұрын

@@WorkshopFromScratch to tym bardziej podziwiam ;)

@WorkshopFromScratch

5 ай бұрын

Również pozdrawiam:)

❤❤❤ which type of that hydraulic..?

@mddchannel9375

2 ай бұрын

Very nice video

2 questions and super bad ass table too! Where did you get the nut rivet tool? And what are the weld in bushings called?

Would you provide a cut sheet and measurements

@WorkshopFromScratch

5 ай бұрын

It is available on Patreon and for channel supporters 😃

Здорово ! Но на мой взгляд очень тяжелая конструкцияю

What gauge of steel did you use?

@WorkshopFromScratch

5 ай бұрын

Steel profile 50x50x2mm and 2mm sheet metal

Can you please give us the dimensions great work btw

@mddchannel9375

2 ай бұрын

Very nice video

Powinieneś zrobić mini pompę elektryczno-hydrauliczną. Zasilana silnikiem 230V szybciej by podnosiło :D

@WorkshopFromScratch

5 ай бұрын

Można by było też taką pompę zamontować, ale ta tęż daję radę tyle że wolna😁

@piotrpiatek6173

3 ай бұрын

@@WorkshopFromScratch mocniejsza pompa :D od wózka widłowego heheheh

Какой максимальный вес поднимает гидравлика?

@WorkshopFromScratch

5 ай бұрын

Максимальную грузоподъемность не проверял, мне кажется, после откручивания колес он сможет поднять 1000 кг 😀

Good morning, I really like your elevator and I would like to make one, but all of you who make videos about some skill you have, never give the measurements to facilitate the assembly for a layman, could you give us the measurements?, thanks a lot

@WorkshopFromScratch

3 ай бұрын

This particular project is available to channel supporters and on Patreon. Sorry, but it is not easy to provide all dimensions in the description.