Little tip for 3d printing: Put hairspray or rub a glue stick on the printing plate to stop sticking. This helps the print get off the plate easier. 🙂

@Opulent_Vision1

17 күн бұрын

Thank you! Was looking for this comment!!!

@Q7h7

17 күн бұрын

@@Opulent_Vision1 do you prefer moyu or qiyi?

@StumbleGurl

16 күн бұрын

@@Q7h7 ik your asking him, but I gotta answer....moyu obviously

@inseminggd9435

16 күн бұрын

​@@StumbleGurl especially if you count yj as part of moyu

@Opulent_Vision1

14 күн бұрын

@coffeedrinker-r8d MOYU for sure... Still have yet to find a qiyi cube that I really like

My favorite thing to do in the evening when it's too dark to cube is sit on my bean bag and watch opulent vision :) 3DDDD

@lothefish9344

15 күн бұрын

@@StumbleGurl just turn on the lights lol

@StumbleGurl

15 күн бұрын

@@lothefish9344 yeah, I do, but sometimes it "being too dark" is a good excuse to watch yt!

If you print in abs instead of pla you can soak the peices in acetone and they will become smooth(er) it won't be perfect but it will help a lot. Although if you did this you might want to build an enclosure for your printer because abs is more heat sensitive.

3D! I will def follow along on this journey! Good luck bro i got my expectations high for this one!

3D, the Rubik's cube is so cool! My favorite song is Count on Me. Maybe you could use Vaseline to get rid of some of the extra plastic.

This is such a neat project, and I'm interested to see where it's going to go! 3D

3D. This is great! Id be very interested in the final product. I'll definitely be keeping up with this

@Opulent_Vision1

17 күн бұрын

Thank you fam! will be a while before the final product is out, but keeping going

It's really cool how you design your own 3D models

thats a really good video im exited to see the future episodes also mabye try using some fine sandpaper to sand the peices to stop them getting stuck on eachother 3D

Pretty interesting. If you want ideas, something that I saw on cubes it's that the layer that you turn ups a bit while turning for less friction. I don't know if it's something on the internal part of the piece or if it's a curve aiming to the corner with the center pointing to them to push it a bit when turns. Also something similar can happen if you print a the pieces where they touch with a bit curve or concave form to just touch the perimeter of the pieces to less friction.

@Opulent_Vision1

16 күн бұрын

Thank you! once I get a good working design, ill add these in!

YAY construction has begun 6 days ago cant wait. Never Gonna Give You Up is a fire song + 3D things are epic

This is good I’ll thing of some tips to help I don’t see any mistakes rn but you could try different filaments like different plastic types and or print the pieces in two colors with notches and holes to make it potentially easier

There are flexible magnetic surfaces that you can use to make it easier to take parts off after you finish printing. Also, before you commit to metal molds for the final design, maybe consider trying to make a smaller first run on resin printed molds after you're done iterating on FDM printing. They don't last nearly as much as metal molds, but they're WAY cheaper, which means if something didn't go as planned, the financial setback of having to make new molds will be way smaller than if you went straight to metal and faced a similar issue.

@Opulent_Vision1

16 күн бұрын

id be down, thanks for the insight!!

so cool! mine wouldnt even try to act like a rubik's cube :(

@Opulent_Vision1

17 күн бұрын

ahahahahaha

This is awesome! Excited to see the finished results ~Noah

I know the title says you want to just make a speed cube from scratch, which is cool enough on its own. But in the video you do talk about wanting to make something better than a gan cube. That’s an interesting goal, but what are your plans to get there? To make something even on par with a gan cube? Of course there is a lot of room for your to improve, but I’m interested in what the plans are which make you think you could improve this to the point where it competes with the best speed cubes out there. Also if it’s possible, you should consider a resin 3D printer. Even if you don’t get one of your own, see if there is anyone you can use for a later prototype, you could get something a lot smoother.

3D Great video, when you do manage to make a speed cube I'll try to buy it! My Favorite song is: All I Want For Christmas Is CUBES! (by TNL cubing) I know you read these comments and I hope I win, as it would be great for my Videos!💪🤞

i learned how to make my cube spin easier thanks

i love watching these cause usually its not that good of a youtuber that makes these sorts of videos but cause you have expereince it makes it very enjoyable to watch

@Opulent_Vision1

17 күн бұрын

Thanks G, Glad you enjoyed

To fix your issue with the center piece. Redesign the screw slot's stem to be skinnier than the spring so that the spring goes around the whole thing while the screw can still enter it. That should fix your entire issue.

3d thats so cool ive wanted to get into 3d printing puzzles but designing is really hard

@Opulent_Vision1

17 күн бұрын

It is tough, but if you force yourself to use RHINO for a few hours, it is a lot easier to get used to... I am only good at it because I use that software as an architect

3D. This cube looks amazing, also will you ever consider making a creator cube (like the j perm cubes or the yoo cube)?

@Opulent_Vision1

17 күн бұрын

Thank you sir!! and ive considered it, working with scs to make an OV RS3MV5, but still in the works

Try adding sockets in the foot of the pieces for future core magnets

my fav song is We Are Cubers Also, very cool project!! 3D

@Opulent_Vision1

17 күн бұрын

such a great song! and thanks fam

"3D" I recommend you to sand down the pieces of the cube so it can be smooth for turning. (Use sand paper to sand it) Also use some inspiration from other cubes for the parts. My favorite song is never gonna give you up

@Opulent_Vision1

17 күн бұрын

Thank you sir! will use sandpaper once I get it working good with springs and all, but dont want to waste a ton of time on it if im just going to print a new one! and will do, I may do this for the core, but I want the cube to be entirely original, so doing what I can to (not) be inspred from other cubes lol!!! but more taking the best thing from each brand

Yo op :) how’s it going love the vids still :) 141k 🔥❤

@Opulent_Vision1

13 күн бұрын

Thanks G!!! I appreciate you!!

Fav song is all of your songs and good luck I believe in you! 3D

This was very impressive keep it up your video quality just keeps improving my fav song is Splat what about you?

@Opulent_Vision1

17 күн бұрын

Thank you sir! will keep working on the quality! and nice!! I dont really have a fav song rn lmao

3D, ép 2 will be sick

Fav song never gonna give you up W vid bro 3D

@Opulent_Vision1

17 күн бұрын

Thank you sir!

Do 3D printed Rubik's cube VS real rubiks cube comparing price, looks, turning and everything else. AND 3D

@Opulent_Vision1

17 күн бұрын

id be down!! Will do this once I get a final product

At the last episode of this please try corner cut 45 degrees

i would probably sand down the insides and "polish" the outsides normally, how i would polish my cubes is press it down hard on a piece of a4 paper and rub each side 5 to 10 minutes, but by taking in consideration that it is *3D* printed, i think it might be too fragile my favourite song has to be iridescent from linkin park, quite a chill song, helps me sleep if i cant for whatever reason, and for some reason, the only song that doesn't cause me to mess up clock memo

@Opulent_Vision1

17 күн бұрын

Thank you! Will do this once I get a good design that works that way we can get a really good final product

3D, before making a whole other version I would sand down the pieces and re make the center pieces to fit the springs better, then but lube in it and see how it turns out.

@Opulent_Vision1

17 күн бұрын

Thank you! I will do this in the next part!

3D, I would have made the pieces be several parts & hollow so you can add magnets and other things easier as well as a sticker less cube

@Opulent_Vision1

17 күн бұрын

this is smart, may do this on the next iteration

Love your content. My favorite band is the Red Hot Chili Peppers love your content bro. ❤❤❤

My favorite song is tingmans: WE ARE CUBERS

@Opulent_Vision1

17 күн бұрын

such a classic

@ZerWubbie

14 күн бұрын

yayyayayayayay

Im not exactly sure how 3D printing works but maybe a ball core might be easier to print

@Opulent_Vision1

16 күн бұрын

It may be, might try this when I design the core

my fav song is prob like smth from yeat

3D, with resin 3d printer it would be probably better. I wanna see the finall product

very cool

@Opulent_Vision1

17 күн бұрын

Thanks G

Wow

@Opulent_Vision1

17 күн бұрын

nice

im not north american but ill say my favorite somg anyways rn its probably xi - freedom dive, but it could change pretty easily ngl

Favorite song is High School Never Ends by Bowling For Soup!

My favorite song is cube fever

@Opulent_Vision1

17 күн бұрын

wow! such a great song

i wanna print this lol

My only 3x3x3 is a GAN cube I am getting I new cube soon that’s a 3x3x3 and I have a 2x2x2 witch is not GAN and the cube I am getting soon is a yoo cube made by cubehead it’s a yoo cube 2 deluxe

You need little bit bigger core I think so piece are bigger than core needed to be

3D, nice video! You should try shave the plastic to make it round

@Opulent_Vision1

16 күн бұрын

Thank you sir! will do this once I settle on a design, so I can see how good I get it

Favourite song is Lofi by domknowz

I guess the only music I listen to is the minecraft background music(because I play the game, nkt on spotify or smth)

My favorie song is Cubers Groove!

@Opulent_Vision1

16 күн бұрын

such a bop fr

my favorite song is crank that soulja boy

My favorite song is Candy Store from the musical Heathers

Fav song: anything T.S!!! Or baby by Justin beiber

@Opulent_Vision1

13 күн бұрын

JB is the best for real

my fav song is probably everybody wants to rule to world

also add some vaseline on the peices after sanding them then wipe it off when u add lube it makes the peices smoother

@Opulent_Vision1

17 күн бұрын

nice! will try this

count em' (remix) by Brandon Lake and KB

i think you need to polish it in the inside and print the stickers

@Opulent_Vision1

17 күн бұрын

id be down

if I were you i would sand the pieces try that next time please

@Opulent_Vision1

4 күн бұрын

Will do. Vid up tomorrow 6am cst

3D 😊

tutorial how to s̶o̶l̶v̶e̶ make rubiks cube

My favorite song is without me by Eminem

Wow What 3D Printer do you use?

@Opulent_Vision1

17 күн бұрын

Creality Ender V3 SE... was like 120 USD at microcenter lol

Tomorrow is the giveaway let's goooooooooo

my favorite song is one chance

@Opulent_Vision1

17 күн бұрын

so good!

the cube you made is a legit copy of the gan mechanism.

3d!

3D!!

3d

just put a gan logo on it

My song (again) is Discord

keep trying buddy one day ur gonna get 100 views first hour of posting a new video not like thats a minimum with 100k+

@Opulent_Vision1

17 күн бұрын

Thank you sir!! I usually get 10k+ for my first hour on shorts, but videos take forever to get views lol

3D

4D

New main?

@Opulent_Vision1

17 күн бұрын

could be!!! gotta see how good we can get it first

yo

@Opulent_Vision1

17 күн бұрын

yo

Could have been me

@Opulent_Vision1

17 күн бұрын

wym

@mkucubingandgaming105

17 күн бұрын

@@Opulent_Vision1 the song

Also i don't listen to music so yeah...

@Opulent_Vision1

17 күн бұрын

ahahahahaha

3D Club! 👇

"If you know me you know Im a huge gan hater" bro doesn't even hife anything.

@Opulent_Vision1

13 күн бұрын

ahahahaha Ive gotta be honest with the viewers...

3D I think I will be a good idea to make moulds for the final version and use a more solid plastic instead of 3d printing it. I would also recommend a pattern for lube distribution. Fav song is still We Fell In Love In October by Girl in Red

@Opulent_Vision1

17 күн бұрын

Thats the plan, molds all the way. Im just 3d printing to quickly find what design I like best. but once I get the final product, I can send my 3d software model in to get accurate molds made. And thank you!! once I figure out my piece design, ill add a pattern on the pieces. What cube do you think has the best pattern for this?

@alexzacuber

17 күн бұрын

​​@@Opulent_Vision1Well, you need a good mix between good lube distribution, maintaining lube for a long while and it being easily cleanable. I have only had the tornado v2, the gan 356m and the guhong pro. The tv2(lines from the magnets and circles around the magnets) has good distribution, and maintains lube for a long while, but is hard to clean. The 356m(hexagons on piece and torpedo's) is easy to clean, and helps evenly distribute lube on the torpedo's, but will dry up really quickly. The dayan guhong (a few squigly lines) maintains lube for a long time and has good dustribution, but I haven't ckeaned it yet so idk how easily it cleans. I think how deep the patterns are matters more, im not an expert tho. Definitely get some patterns on the torpedo's.

3d

3D

3d

3d

3d

3d

3d

3d

3d

3D

3D

3D

3D

3D

3d

3d

3D

@Opulent_Vision1

17 күн бұрын

ayyyyyyyyyyyy

3d

@Opulent_Vision1

17 күн бұрын

ayyyyyyyyyy thanks for watching G!