Till now, no one made a RC heli like this. You are the first person on KZread that I know of who made such a flying machine on RC

@markuszingg3131

2 жыл бұрын

Its a nice design, but there was at least close enough work already present. See Tom Stantons design and from where he got the idea. kzread.info/dash/bejne/lmxk0bqMc8auhM4.html

@kazapopidar

2 жыл бұрын

Wrong)

@pratapsarkar6673

2 жыл бұрын

@@kazapopidar well I was talking about non-tandem ones

@sumantabhowmick.4128

2 жыл бұрын

@ Pratap Sarkar you are absolutely correct , me too never seen on KZread RC heli like this...

@babumohan4549

2 жыл бұрын

I agreed you,Mr.Pratap Sarkar.well said.

😳 wow really awesome idea 💡

@proknow

2 жыл бұрын

Thanks brother 😌

Fantastic work 👌

Hey, bro nice helicopter 🚁 😊

It was quite a nice idea to use a another moter downward so that the helicopter doesn't start rotating itself

Here is what I posted on the FB shared page ...THAT...is a really good design and utilizes even simple flight controller. Even better design for FPV heli as it reduces those huge , high mass blades to something that could actually be duct enclosed. If you utilize that suggestion , I would actually call it 'the design of the century!' I'm sure most of the current heli flyers, and many times more 'b asic' beginner heli flyers would recognize it as the simplest, most stable design adopted by the toy heli industry the moment toy helis came out. One could easily go further and place a forward thrust proprietary motor/prop on either just inside the nose area(with a little design change--lengthen nose) or at the rear of the vertical post.. Probably THE most flexible design ever.

Amazing Invention Friend...❤️❤️ Take love... Go Ahead...

Damn smart of you having this idea!

Wow awesome work, this is not a typical DIY helicopter.

Awesome RC project! Thanks for the detailed explanation!

@lokaero

Жыл бұрын

I'm wondering this is fake because multi rotor needs either gyroscopic stabilization in their rotor blade or it needs angle or pitch control over the thrust angle so that it balances itself. The sad thing is this model is a total fake one he is filming with green thread or stick and edited like it is flying. many in the comments are thinking this is real and appreciating him. lol.

Hi bro, first of all ver nice job and it works excellent. But I'm very curious how the roll stability is handled. From your video it can be seen thT everything set to the cg point for pitch and yaw the controls are there, but roll have you done anything special?

You finally going to break the DRONE ERA ...

Great 👍

Fantástico , show !!!!

Wow its great idea

so creative, good job 👏

Quedó de película, buen video.

Great Brother 👏😍

First with like

Very creative man!

Nice idea

Máy bay trực thăng mô hình tự chế rất tuyệt vời xin cảm ơn đã chia sẻ

You are going to be my favorite drone stuff channel ❣❣

@lokaero

Жыл бұрын

I'm wondering this is fake because multi rotor needs either gyroscopic stabilization in their rotor blade or it needs angle or pitch control over the thrust angle so that it balances itself. The sad thing is this model is a total fake one he is filming with green thread or stick and edited like it is flying. many in the comments are thinking this is real and appreciating him. lol.

Awsm 😊❤

amazing landing bro.

Big fan bro💗💗💗

Wow helicopter 😊🤗😍... I'm impressed ❤

@lokaero

Жыл бұрын

I'm wondering this is fake because multi rotor needs either gyroscopic stabilization in their rotor blade or it needs angle or pitch control over the thrust angle so that it balances itself. The sad thing is this model is a total fake one he is filming with green thread or stick and edited like it is flying. many in the comments are thinking this is real and appreciating him. lol.

Cool 👍🏻

What a great concept!

@lokaero

Жыл бұрын

I'm wondering this is fake because multi rotor needs either gyroscopic stabilization in their rotor blade or it needs angle or pitch control over the thrust angle so that it balances itself. The sad thing is this model is a total fake one he is filming with green thread or stick and edited like it is flying. many in the comments are thinking this is real and appreciating him. lol.

Wooaoo! super!

Probably first in youtube

Superb idea

Genius 👍👍👍👍👍👍👍👍👍

Genius guy .

BRAVO!!!

Wow iam proud of you bro you make a Rc helicopter wow 🥺🥺

@proknow

2 жыл бұрын

😌 धन्यवाद |

Brilliant 👍👍💯

Rất tuyệt vời 👍

🙏 Namaste, excellent work, Thanking you.

@proknow

2 жыл бұрын

🙏🏼नमस्ते, धन्यवाद।

Muy Bueno!!

Basically a Y4 quadcopter. What about the roll authority with the tail rotors that close together?

@eduardoleite7566

2 жыл бұрын

Fake. Impossible because the 2 motors are plugged in same esc

@proknow

2 жыл бұрын

@Eduardo Leite No, both the motor having separate ESC and Direction, one of them is using Clockwise propeller and another one is using counter clockwise propeller. I think use should watch video again

@Ihavetruth22

Жыл бұрын

FAKE VID

@Ihavetruth22

Жыл бұрын

@@eduardoleite7566 FAKE VID.

Amazing❤❤

Please make another that's so cool 🙂🙂

good job but please leave space for pilot

Innovative design.

Wowww super and very complicated 🎉🎉🎉🎉🎉

Idola..

Where is conected all 2 motors brushed în the tail? Nice work!! Can you answer me?

Đẳng cấp quá sáng tạo

my opinion is to add a fly Bar to make it more stable after a pitch and yaw motion

kon se software se video edit krte ho ?? really good

@proknow

2 жыл бұрын

Premiere pro

Love you bro

Super amazing Super dizaine

Nicely done! Just a question, why didnt you just 3d print frame also?

Hi bro, I am 7th grade now. They gave me a project like making 🚁 helicopter, so I went to many videos but they are hard😰😭😩. But this is a marvel of science. Thank you for explaining clearly. 😀

its awesome but i think you forgot to put turning mechanism

Good👍

Super bro

Very good engineering skills!

@lokaero

Жыл бұрын

I'm wondering this is fake because multi rotor needs either gyroscopic stabilization in their rotor blade or it needs angle or pitch control over the thrust angle so that it balances itself. The sad thing is this model is a total fake one he is filming with green thread or stick and edited like it is flying. many in the comments are thinking this is real and appreciating him. lol.

@lokaero

Жыл бұрын

are you an engineer?

But how was it stable without any servo motors ?

@ernestomorales411

2 жыл бұрын

With the contrarrotating propellers.

@notyet_fpv

2 жыл бұрын

It's actually a quadcopter with sluggish roll axis

@Ihavetruth22

Жыл бұрын

@@notyet_fpv FAKE

Awesome

How to control the Roll ? It is possible to use different thrust tail motors ?

@gittarpikk

2 жыл бұрын

low CG keeps the skids pointing down most always. This would NOT be a 3D heli for sure

Good 💡.what programming do you use?

I also made this helicopter but not flying due to setup... Please tell me setup of kk flight controller for this helicopter 🌹

Vai left right kaise hote hay plz batao❤❤

Nice train

unfortunately a great idea but without a project to make it happen

Best video

I really appreciate your helicopter. But I think it's structure is like a helicopter but it uses the principle of a drone to move around.

I would like to know the same thing. how did you program the transmitter.

*_Я не понимаю, что не давало, так делать 50 лет назад?_* 🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄😎

Very Hard work you have Done. Mind blowing idea,structure and flying.thank you.love from Salem,TN.

@lokaero

Жыл бұрын

I'm wondering this is fake because multi rotor needs either gyroscopic stabilization in their rotor blade or it needs angle or pitch control over the thrust angle so that it balances itself. The sad thing is this model is a total fake one he is filming with green thread or stick and edited like it is flying. many in the comments are thinking this is real and appreciating him. lol.

@lokaero

Жыл бұрын

illa bro ithu fake. stabilization eh illa indha multirotor la. ennoda channel visit pannunga.

Nice

Si se usa un motor detrás brusslles con variador de cambio de giro serviría?

hello there, I'm really fascinated with this coaxial helicopter design, so creative! could you give me an idea about how much weight those 2 brushless motors could lift pls?

@ardudrone.9609

4 ай бұрын

2.6 kg

Can you show about set uping this broject🙏(connecting)

Although good job done, but if some one wants try a hand on this project details are not enough, KK 2.1.5 part is ok but how do you control coreless motors, pl. give complete details so that fresh in this field can also try their hands at it, i hope you will not mind and would be kind enough to provide complete details of the project, hope you will come with complete details of thr project soon, God bless.

Hello, cool part ! What kind of motor layout do you have on the kk2 board ? Thank you

Y un solo motor detrás brushed serviría?

مدهش 👍 🇰🇼

Where is size ... I can't find on discription

Bravo

Hi nice video about DIY helicopter, I have a doubt is coreless motors tolerate 20A current, bcoz WHAT you have mentioned that 20A ESC IT delivered current is 20 A output could you clear that doubt, is it not too much for that coreless motors

Wow good engineering ya ,but what's it's max payload any idea

Wow I really love it where can I get the materials from.

Great

Боливудские спецэффекты))

@ssmodest

2 жыл бұрын

Зато какие крупные планы)

Make one video on detail programming of this helicopter .

Good

U r awesome

@proknow

4 ай бұрын

🙂🙂

Is it structurally possible? The gyro has no structure, and a simple brushed motor isn't enough to handle the motion of this aircraft. I think the video was edited...

Can it be done with single bldc motor. ? Whts the role of second motor ?

Plz bro one video on its very beautiful maiden flite plz bro 👍

a cauda pode ser melhorada com apenas um motor .... não escovado .....

Que legal pena que eu não tenho todas as pesas

OK THANK YOU

Very nice ,landing was mind blowing.It looks like it has a transparent outer body while flying. Excellent flight balance 👌👌👌

@lokaero

Жыл бұрын

I'm wondering this is fake because multi rotor needs either gyroscopic stabilization in their rotor blade or it needs angle or pitch control over the thrust angle so that it balances itself. The sad thing is this model is a total fake one he is filming with green thread or stick and edited like it is flying. many in the comments are thinking this is real and appreciating him. lol.

@prasannakumar8832

Жыл бұрын

Hi Lokaero, I think that the weight at the bottom of this helicopter is more and the two blades are rotating at some high specific speed. The battery may drain fast because of heavy discharge. The weight prevents machine from loosing it's centre of gravity and eliminates the need of gyroscopic control. The flight is real but missing full controls like left right.

@lokaero

Жыл бұрын

@@prasannakumar8832 Absolutely wrong. I think you need to gain more knowledge on aerodynamics. Weight cannot balance the helicopter. even a small toy helicopter has rotating mass attached at its one of the blade which counteracts the imbalance of rotational axis when airborne. As an aeronautical engineer i can easily say that this model is totally fake. and battery does not play role in balancing the helicopter lol. You may have knowledge in lithium batteries but not in aerodynamics and mechanics. i too have knowledge in lithium batteries and your point doesn't have any logic here.

@lokaero

Жыл бұрын

@@prasannakumar8832 The flight controller he uses is KK 2.1.5. and i cannot see any servo attached to the brushless motors. i accept that rotation is balanced as both motors spin in CW and CCW directions. but this is not balanced in X rotation and Z rotation. only Y rotation is balanced. no point in using a flight controller here those two motors at tail simply does nothing in balancing the heli.

How is roll achieved?

what is the total budget?

Please add names to the parts either in the video or use time stamps so that a noob like me would understand...