While making this video I accidentally deleted all the original animation files and video files not once but TWO TIMES!! Set me back by three months! I almost gave up when it got deleted the second time, but I decided to complete the video at any cost. I knew it would be worth it in the end. Hence the late upload. Sorry about that. I choose quality over quantity. My next video will be mind-blowing, I promise!

@dimitris2521

Жыл бұрын

Outstanding work! I would suggest you use software like TimeMachine(Mac), BackInTime(Linux) or any equivalent if you are using Windows. It is literally a lifesaver. It helps not only if you accidentally delete your files, but also if anything gets corrupted or in case you make an irreversible change to your work you would like to revert.

@sygdesignworks

Жыл бұрын

@@dimitris2521 ​ @dimitris2521 Thanks a lot! I now save my files in different devices as backup. Thanks for the suggestion.

@dimitris2521

Жыл бұрын

@@sygdesignworks And that's the right thing to do! The kind of software I'm suggesting you, though, is not a replacement for your backup scheme. It's used on your main disk (which contains the files you are currently working on) and enables you to revert from changes you have made to a specific time. For example, if you are currently working on an animation and you make a change you don't like, you can make your files as they were right before you made that change 2 hours or 2 days before, for example. This is also handy if you accidentally delete a file. You can immediately find it in your "data history". No need to revert to the last time you manually made a backup (which would be probably outdated). Trust me. You should definitely give it a try. Keep up the good work! Cheers

@sygdesignworks

Жыл бұрын

@@dimitris2521 Thanks a lot!

@ronaldgreen5292

7 ай бұрын

That's more than 👍 ok! You are human!! I loved the technical details in your video!👍 loved it, thanks!

Thank you for this amazing video Sir❤️. Very nicely explained and animated👍. Love from India🇮🇳❤️

@sygdesignworks

7 ай бұрын

Thanks a lot! Thank you for watching!

Thank you soo much brother. I understood 100% about helicopters.

@sygdesignworks

Жыл бұрын

Thanks a lot!

Very informative. It explained a lot. I’ll probably watch it several times

@sygdesignworks

3 ай бұрын

Thanks for watching!

Good job! Thank you for video

@sygdesignworks

Жыл бұрын

Thanks a lot!

In order to tilt the rotor disk forward, the swash plate is tilted to the left. Not forward. Gyroscopic phenomenon. And so on for the other tilts. Backwards = swashplate tilt to the right Left = swashplate tilt backwards Right = swasthplate tilt forward (if the rotor is turning clockwise, in top down view. The oposite is true if the rotor is turning counter clockwise) 👍👍👍👍

@jasonnhu3338

Жыл бұрын

That only works when you phasing the rotor 90 deg from the swashplate

@mr_nice.

Жыл бұрын

@@jasonnhu3338 ...I'm not sure brother. I'm about 73.28% sure that is how things work in the real world, and another 5-6% that it's the same in the RC world, but I can't realy tell for sure. I'm not a mechanic. I just saw a couple of videos. Would be nice to find a video that explains it. 👍👍👍

@jasonnhu3338

Жыл бұрын

@@mr_nice. whenever you see the linkage go straight up from swashplate to the main blade grip without phasing, then it will work just like in the video. Other case, if the linkage is 90 deg not directly from the swashplate, i.e., the linkage came up from the swashplate and then links to a mixing arm, then from the other end of the mixing arm links to the main grip 90 deg from the first start of the 'joint'.

@mr_nice.

Жыл бұрын

@@jasonnhu3338 ......you lost me after the mixing arm 😂😂😂

@jordancoleman2402

8 ай бұрын

All depends on what kind of servo setup you are using, yes in some applications you are correct but not in all "90 degrees one servo" or "CCPM 120 degrees" so you are half right. 👍

No words to describe this beautiful video.

@sygdesignworks

11 ай бұрын

Thanks a lot!

FANTASTIC GOD BLESS YOU

@sygdesignworks

7 ай бұрын

Thanks a lot! Thank you for watching.

I love flying rc planes and helis, very nice video!

@sygdesignworks

4 ай бұрын

Thanks for watching!

I like it ,it looks very beautiful, and I went to learn how to fix it

Fantastic Animation video so beautifully explained ....a complex flying machine such as a helicopter. One feature of precession may have been deliberately missed out. Maybe it is difficult to understand by a hobbyist. Hope to see many such videos in times to come. All the best in your remarkable venture.

@sygdesignworks

Жыл бұрын

Thank you very much! Thanks for watching.

The front two servos need to be rotated 180 to allow the linkages to be perpendicular to the main shaft

thank you this was very easy to understand

@sygdesignworks

8 ай бұрын

Thanks for watching!

Great animation. Things become to be clear ..... Thank you so mcuh for this great job.

@sygdesignworks

7 ай бұрын

Thanks a lot! Thanks for watching!

Very detailed if you're thinking of building one especially 3d printing parts

@sygdesignworks

8 ай бұрын

Thanks for watching!

Nice

@sygdesignworks

7 ай бұрын

Thanks for watching!

That’s my align trex 450se v2! 😅 The first collective pitch RC helicopter I flue! I still have it! Still flybar, 3s but I’ve got 6s motor to upgrade it and then I will covert it to flybarless finally! 😅 Great job with the animation!

@sygdesignworks

5 ай бұрын

Thanks for watching!

You actually have to offset the swashplate actuators by 90° (gyroscopic precession) or it will never fly as intended. Also there are other differences with how a true chopper works, but I guess for those ones it's because it's a RC helicopter.

@sygdesignworks

5 ай бұрын

Correct. But that works when the control rods are going straight to the rotor blades. Here the the mixing lever is doing that 90 degree phasing. Thanks for watching.

If you want to yaw the helicopter left and the main rotor blade is rotating clockwise then you would turn the lift off on the tail rotor. The torque is what yaws the helicopter to the left. If you want to yaw right then you add lift to the tail rotor to pull the tail to the left. You said that lift was applied in both directions to the tail rotor to control left and right yaw. I always thought the torque would yaw you in one direction and the tail rotor lift would yaw you in the other direction.

Bro thats was lit reallly enjoyed it Just feels like professional documentary and the bg music though💙

@sygdesignworks

11 ай бұрын

Thanks a lot!

@ONI-CHA

11 ай бұрын

@@sygdesignworks can you mention back ground music name

@sygdesignworks

11 ай бұрын

@@ONI-CHA I've mentioned all of them in the description.

kỳ diệu

@sygdesignworks

7 ай бұрын

Thanks a lot!

Great Job... i want radio control 6 channel Schmetic diagram please.

@sygdesignworks

7 ай бұрын

I downloaded it from some website. I uploaded this video almost an year ago, so I don't remember the name of the website. Thanks for watching.

You forgot the guroscopic precession, blades tils 90 degrees earlier in every position.

@sygdesignworks

22 күн бұрын

Not in this model. Observe The mixer arm arrangement. It will counter the gyroscopic precession.

Parabéns pelo trabalho☆

@sygdesignworks

8 ай бұрын

Thanks a lot!

Great work keep it up!

@sygdesignworks

Жыл бұрын

Thanks a lot! Thanks for watching!

I watched thia specifically for the workings of a flybar. No such luck 😢 Stunning graphics though

@sygdesignworks

8 ай бұрын

Thanks for watching!

Amazing Video!!! Wish I knew all this earlier. I have a top of the line RC helicopter that I still haven’t flown. Any videos on the buttons on the remote? Thank you!!

@sygdesignworks

7 ай бұрын

I'll make another video on Quadrotors, I'll explain the transmitter in that video. Thanks for watching!

@actionman67

7 ай бұрын

@@sygdesignworks thanks a million Times!!! Your vidéo is at another level and never seen such clear explanations.

@sygdesignworks

7 ай бұрын

@@actionman67 Thanks a lot! You might like my F-35 video :)

The model being used in this video is a old skool "flybar" head, would really like to see one made on how a flybarless head works in hand with a gyro. 👍

@sygdesignworks

8 ай бұрын

Great idea! I wanted to make a video on flybarless one too. Thanks for watching!

Amazing 😍😍😍😍😍 video

@sygdesignworks

Жыл бұрын

Thanks a lot!

Would it be possible to do a similar simulation about a Coaxial Helicopter, please?

@sygdesignworks

Жыл бұрын

Sure! I'll make one on Coax heli. Thanks for watching!

😊😊😊

@sygdesignworks

Жыл бұрын

Thanks for watching!

in you explanation you ignored gyroscopic force completely. everythings act 90 dagree after you applied the force. to pitch forward you need move down swashplate in the right.

@sygdesignworks

7 ай бұрын

The gyroscopic precession doesn't work on this model, because of the way the control rods are connected to the blades. There is no 90 degree phasing when the rods go from the mixing lever, therefore the gyroscopic precession is absent. Thanks for watching.

How can I afford it

@sygdesignworks

6 ай бұрын

No Idea. Thanks for watching!

Merhaba kolay gelsin 3 adet servo motoru ayni anda hareket ettirmek için ve sonra ayrı ayrı hareket etmesini için nasıl bir sistem kullanılıyor

@sygdesignworks

Жыл бұрын

There's a potentiometer in servos that controls the angle of the servos. The servos move depending on the input received from the wireless transmitter.

@kasifyldrm1981

Жыл бұрын

@@sygdesignworks onu biliyorum izlediğim başka videolarda da kumandadan verilen komutla 3 servo motor aynı anda ve kumandanın başka dugmesiyle verilen komutla ayrı ayrı hareket ediyor bunun bir sistemi varmı

@sygdesignworks

Жыл бұрын

@@kasifyldrm1981 Yes. They are called "mixing". In the transmitter, there is an option to mix controls. The mixing will make your servos move simultaneously as well as individually depending upon what you are controlling. You can even make them move opposite to each other.You can find plenty of videos about transmitter channel mixing.

You didn't use the concept of gyroscopic precession.

@sygdesignworks

8 ай бұрын

In this model, due to the specific arrangement of the control rods and the mixing lever, there will be no phase shift. Therefore no gyroscopic precession.

🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩❤❤❤❤❤

@sygdesignworks

4 ай бұрын

Thanks for watching!

YOU HAVE AN ERROR there, tilting swash plate forward NEVER tilt rotor disc fowrard. THERE IS ALWAYS 90° DELAY. At least at real helicopters. Look at UH-60 swash plate control and at what angle the pitch horns are mounted on blades.

@sygdesignworks

5 ай бұрын

In this model, the placement of the mixing lever against Swashplate with the control rod will cancel the phase-shift. In UH-60, the control rods goes straight from the swashplate to the rotor blades directly. Here the control rods go from swashplate to mixing lever and then to the blades.

COMMENT ON FAIR SAI IMAGES LA CEST LE 3DMAYA

@sygdesignworks

9 ай бұрын

Sorry I don't use Maya. Thanks for watching!

The explanation of rolling is totally wrong. The action of a helicopter involves the gyro effect that make the any action output delay 1/4 cycle. For example, if you need the helicopter rolls forward, actually you are giving positive pitch on right side (when the blade is rotating clockwise)

@sygdesignworks

8 ай бұрын

Not wrong at all bro. Take a look at how linkage goes straight to the blade grip from the swashplate. The gyroscopic precession occurs only when there is a phase shift of 90 degrees.

@JMMC1005

6 ай бұрын

​@@sygdesignworksThe gyroscopic precession always exists (it's physics) but your model automatically applies a 90 deg phase shift between swashplate and blades. Your animation is correct (swash forward will pitch forward), but the explanation is wrong. Pitching the swashplate forward increases / decreases pitch at 90 degrees in your model, resulting in lift asymmetry on the roll axis. Due to precession this results in pitching of the heli.

Nice

@sygdesignworks

7 ай бұрын

Thanks for watching.