Making a Multifunctional Drill Press | Woodworking Ideas
Тәжірибелік нұсқаулар және стиль
Have you ever thought about it? If only I could hold the multitool accurately and vertically against the material...
I actually tried to make it.
I was worried about vibration before making it, but it seems to be OK if it is fixed firmly.
Multitool
Brand: BOSCH
Model Number: GMF50-36
Multitool blade 2
Brand: BOSCH
Model Number: AIZ10ABN
Electric Drill
Brand: Makita
Model Number: 6408
Trimmer
Brand: RYOBI(KYOCERA)
Model Number: MTR-42
T-Slot Track (9.5mm x 19mm)
Brand: CarAngels
Mold release agent (Silicone barrier)
Brand: GSI Creos
Model Number: VM008
Slide rail (300mm)
Brand: VADANIA
Model Number: VA1045
Binding band [non-stretch] 2.5cm width
Brand: Furupa
Model Number: HSSbelt80
Epoxy putty
Brand: Cemedine
Model Number: HC-115
Micro Compound Table
Brand: PROXON
Model Number: 27100
Contour Gauge (orange one)
Brand: GESPERT
Model Number: FANGXK-002
Пікірлер: 129
Although I've come to expect a certain level of ingenuity and ingenious design from Japanese craftsmanship, the creations born from your hand never ceases to amaze me. Greetings once again from Anchorage, Alaska!
I am so happy I have found you! Thank you so much for the wonderful video and brilliant work!
Thank you, too, for your creativity!
Absolutely love what you are doing ❤️
Que envidia. Un video muy elegante paso a paso. Queda uno enamorado de toda esa maquinaria. Un taller completo hecho con inteligencia. Saludos a todos desde Cali, Colombia.
私も似たようなドリルプレスを作りましたが、スライドレールの遊びによるブレが出てくるので、根本的に構造を変えて作り直そうかと考えていました。でも、このビデオを観てそういう解決方法があるのかと感心しました。素晴らしい。是非応用させていただきます。 他の作品例も含め、知恵と工夫で問題を解決するというのは貴方のような方の為にある言葉ですね。素晴らしいの一言に尽きます。 次のビデオも大いに期待しています。ありがとうございました。
@YASUHIROTV
Жыл бұрын
そのように言っていただけると嬉しいです。 とても励みになります。 どんどんアップロードするのでまた見に来てください。 ありがとうございました。
Mesmerizing design and assembly!!!
Amazing design, and build! Well done!
Love your work!!
I have to Say Yasusiro, you sir are awesome not just on this video but all i have watched so far the craftmanship is awe inspiring and the tips as well. you have helped me get back into wood turning and crafting again cheers from Australia.
Everything about this video is inspiring. Beautiful work. Beautiful ideas. Beautiful collection of fabrication techniques. Learning so much. Great video. Great production. Thank you for your generosity in sharing. Thank you for your hard work in doing so. Much respect.
Excelente idea, tendremos q repetirla todos los interesados, muchas gracias.
I congratulate your for this beautiful work.
This is the BEST. Thanks
Outstanding!
very carefully planned and executed, nice work
@YASUHIROTV
Жыл бұрын
Thank you very much.
Your channel is a work of art, it's a beauty to watch and inspire myself, thank you and God bless you.
@imamudinimka5634
Жыл бұрын
Hhgh PP
Amazing work 🤩👍
Brilliant!!
Absolutely fantastic work well done.good luck from Ireland ❤
また一つ最強アイテム増えましたね🎵 完成度抜群👍
@YASUHIROTV
Жыл бұрын
まだあまり試してないですが、便利な最強アイテムかもしれません😁 コメントありがとうございます
muchas gracias por enseñarnos tan detalladamente, la construcción de todo estos accesorios.
Nice work yet again. We shared this video on our homemade tools forum this week 😎
Muy Buen Video ------ *¡¡¡ BUEN TRABAJO !!!*
The way you do it is very good, very creative,
A very nice work. Thanks you. My case: I used those telescopic guides for a saw already... they move laterally so much, and they don't hold much force. I decided to change it for a linear bearing.
Woooow amazing dude. Congratulations. God bless you always.
@YASUHIROTV
Жыл бұрын
Thank you so much!
Great project, I love it and I like the one setup for different machines. A quick release would help some time. Put on the bottom an aluminium u rail so all of the mounting plates will hook in. ( opening to the top) and one wooden knob with thread on the top to secure the plate to the base. This will skip (the where is my Allen key.) A little screw on the back could be your adjustment. But man what a clever idea. Thanks for sharing from Mexico.
AS ALWAYS: Very useful ideas and excellent execution sir! Showing your need for adjustment (like the undesirable freeplay of the drawer slides, and how you had to correct it) really says very good things about you, being humble and honest. Keep up the good work and please continue to give us your great inspiration, good ideas and your excellent approach on how to make your own precise, less expensive and practical bench tools from common electric hand tools! A big reverence from Mexico!
@YASUHIROTV
Жыл бұрын
I am glad you put it that way. I would like to produce more videos that are easier for viewers to understand. I will continue to do my best. Thank you from Japan!
Excellent 👍👍👍👍👍👍
I deeply respect and admire this project,
@Zie_carpentry
Жыл бұрын
Hello
@YASUHIROTV
Жыл бұрын
That encourages me a lot.
Real project,, idea brilliant
@YASUHIROTV
Жыл бұрын
Thank you!
Brilliant use of oscillator
Perfect!
@YASUHIROTV
Жыл бұрын
Thank you!
Dude sweet! That's totally gonna be a thing now.
@YASUHIROTV
Жыл бұрын
Thank you so much!
A very nice idea i like
Замечательная идея Универсальная подставка под любой ручной инструмент Таким макаром можно ешё болгарку установить и поставить на неё шлифовальный круг
Cool 👍
very talented
I don't know why, but it's amazing! We support you in the future! Yasuhiro TV!
@YASUHIROTV
Жыл бұрын
I am grateful for your support!
I'm a new subscriber. Love your channel. Your commitment to great workmanship is truly inspiring. QUESTION... How many requests would it take for you to carve out time to draft blueprints for this one?
Brilliant! I wish I had the necessary experience/nerve to try these, but I am not ready yet, not by a long shot. Great builds though.
@Sportyg1960
Жыл бұрын
Please do you know what the tool is under the drill press
Merci beaucoup pour la vidéo
@YASUHIROTV
Жыл бұрын
Merci pour votre commentaire.
Gracias por compartir conocimiento, es bueno, no logré entender cómo lo ajustó para que diera escuadra el taladro.
なんだ、ボール盤か。 そんな30分前の失礼な自分を張り倒してやりたい。 マルチツールやトリマーをボール盤になんて まったく考えたことがなかった! しかも凄い精度!ハンドル製作時のホゾ穴の隔ての薄さにゾクゾクしました。ツールの刃って結構硬いとはいえ 全然逃げないのには感服です。 他にもボール盤に装着できる工具はないものかと フワフワと考えてみたのですが、何故かハツリ機が 頭に浮かんでしまった自分の阿呆さ加減が 今回の作品の素晴らしさをより痛感させてくれました。 あと、マルチツールの刃って動画だとあんな風な 蜃気楼みたいに映るんですねー。おもしろい。
@YASUHIROTV
Жыл бұрын
動画を見ていただきありがとうございます。 精度が予想以上で私も驚きました。 振動でブレる可能性があると思いながら製作しました。もしブレた場合には緩衝材や伸縮性のバンドなども用意していましたがその必要がありませんでした。 くねくねしておもしろいと思いながら撮影しました。
Yasuhiro büyük saygı duydum. Bana da ögret bu işi usta🙏.
I'm a mechanical engineer from Spain, and I'm starting learning woodworking. I can see you acuracy, and as a profesional in the mechanical field, I really admire It. First of all, I want yo thank you for the very detailed videos. They are really good to learn diferents process with diferent tools, and always with an objetive! Where have you learnt this skills?? Greetings! Alejandro
@YASUHIROTV
Жыл бұрын
I am glad to hear you say so. I was inspired by studying architecture in college and watching various videos on Facebook and KZread to actually try it out myself.
@alfredomarquez9777
Жыл бұрын
Hey Alejandro! Resulta que yo también soy un ingeniero, Ingeniero Químico para ser preciso, pero con gran inclinación hacia lo mecánico, y también admiro a este magnífico artesano Japonés y sigo sus videos, y coincido con vos en que su ingenio está muy presente. Te comento que ya quisiera yo tener personas tan ingeniosas entre mis compañeros! Saludos desde México!
Super Ideen!
با سلام وعرض ادب احترام بسیار عالی وحرفه ای بدون نقص سپاسگزارم
another amazing project, chances to have the plans published?
좋은 하루되세요 또올께요~
Great...
excellent dear❤
@YASUHIROTV
Жыл бұрын
Thank you so much!
Excelente trabajo, se puede ver los planos o medidas d los materiales? 👍👍
i like four videos you frend thanks tutorialnya kren salam satu hobi
10/10
4:02 The rail was playing because 3-piece drawer slides have the leeway to pull the entire drawer box out. 4:38 And it's still playing.
xem cách bạn làm hay đó
Great Work! Is there any chance to get the plans?
Забавная какая розетка с bluetooth.. Респект из России !
فديوهاتك روعة لكن بالرغم من أنني مبتدئ احتاج المقاييس بالسنتيم وتشكر
As always love your work. I'm still trying to get my head around the second adjustment with the angle bar, is there play in the connection between the board connecting the drill to the back plate?
@YASUHIROTV
Жыл бұрын
Thank you!!! I don't know if I can answer your question well since I am still learning English, but I have a slightly larger screw hole in the board that connects to the drill. By fixing the edge closely to the angle bar adjusted to the correct angle, it is always installed at the correct angle.
@josephforsyth7874
Жыл бұрын
@@YASUHIROTV that makes complete sense. I’m itching to try this build
Hi there, you are using a very unique diy table saw. Would you share the way you built it?
@YASUHIROTV
Жыл бұрын
Thanks for watching the video. My table saw is very simple, just a cheap circular saw plate with holes drilled and screwed in place. The fabrication process can be found in my previous videos on the 10-in-1 workbench or the 7 table saw guide.
What was the device used to move the work piece around under the router? Thank you for another excellent video!
you are an excellent woodworker ......can you help me to get an original of ryobi saws ?
🙏🙏🙏
Hello. I really liked your video, please attach the file with the drawing blueprints
Класс. У вас есть чертежи . Хочу сделать из дрели сверлильный станок.👍
Great Video! Would it be possible to make a holding bracket to use this with an angle grinder?
@Sportyg1960
Жыл бұрын
What is the tool used under the drill press PLEASE ANYONE HELP
@bigrenegade7121
Жыл бұрын
@@Sportyg1960 Not sure if this fully answers your question, but he has set it up to use 3 different tools here: 1) Drill (actual drill press); 2) Multi function Tool (a variety of blades for it); 3) An angle grinder (also with various blades that can be swapped out); 4) A router. When he is using the router he has a milling vise under it to allow for very specific tooling of a part. And what it is sitting on, I believe, is just his work bench.
bhai fbr tex kesy pay kren or kesy pta chly ga k hamra Kitna tex hai
Pourquoi pas de detail de mesure et autres?
I am wondering what is the use of Mobile phone on table ?
@omsingharjit
9 ай бұрын
21:36 ooh , ok got that 😅
쓰바라시~!
Como fazer um slide
26:48 Another youtuber JSK Koubou had put on a bicycle handle and with the brake lever and wire operated the drill
Hello! Interesting ideas and videos! Tell me what is model of your end saw please? (модель торцовочной пилы Макита)
@YASUHIROTV
Жыл бұрын
Здравствуйте! Большое спасибо. (Я немного не уверен в правильности своего ответа...) Митерсальная пила LS0612FL
@alexpoloskoff133
Жыл бұрын
Hello! This is what I asked, thanks!
Hi OK
Hello sir. Ibwould like to know where I can buy a tool/guide like thebone you use at minute 23.50 Thank you and great job
@alexkochiev8572
Жыл бұрын
It's a PROXXON precision machine vise I think
@YASUHIROTV
Жыл бұрын
Hello! I bought it from Amazon.com in Japan. The details of the tools and other information are given in the subtitle or description. Micro Compound Table Brand: PROXON Model Number: 27100
👍👍👍💯💪🤝
Big question is... can we get plans for this?
@YASUHIROTV
Жыл бұрын
Sorry, I used to draw plans, but it is time consuming and I only draw rough plans for myself these days. I will only write plans for videos that have a lot of requests.
@kbuchi66c
15 күн бұрын
This plan is necessary for me, too😊
👍🇵🇱
@YASUHIROTV
Жыл бұрын
👍jp
Applausi!!!!
Please PLEASE TELL ME THE TOOL YOU’RE USING UNDER THE DRILL PRESS IT’S GOING BACK AND FORTH SIDE TO SIDE WITH THE HANDLE PLEASE ANYONE TELL ME
@Rambotoyboy
Жыл бұрын
2 axis vice
Muy interesante y bueno,pero el idioma no ayudó.
側をニスで塗らないのか
I love every one of your videos, hope to make it, but no size shown. For other people, the video can provide detailed size information, I think you can do it, thank you
Söze gerek yok!
Minuto 14. la cinta velcro para sujeción, no me convence nada...
Look to Matias Wandel channel. Pantorouter
Включение конечно не очень надежно и безопасно
@eugenkuptsov9290
Жыл бұрын
Розетка с bluetooth впечатлила
👍Jos... ini gais ada video pemasangan tulang kapal kayu berat 👉kzread.info/dash/bejne/hKyplM-pe5rflrQ.html
Why a mask?
@flowerchildtokyo
Жыл бұрын
sawdust?
looked a bit cheap.............🤨🤨
A very nice idea i like