Making a hydraulic briquette press

Тәжірибелік нұсқаулар және стиль

Some of you may remember I modified my wood burner and can no longer burn the sawdust, now I can turn it into nice little briquettes instead!
Full plans with DXF's for the laser cut parts and electrical diagrams along with a full write up and explaination of all the workings will be on my patreon page- / newyorkshireworkshop

Пікірлер: 2 700

  • @NewYorkshireWorkshop
    @NewYorkshireWorkshop2 жыл бұрын

    Full plans with DXF's for the laser cut parts and electrical diagrams along with a full write up and explaination of all the workings will be on my patreon page- www.patreon.com/newyorkshireworkshop

  • @lourias

    @lourias

    2 жыл бұрын

    That is super amazing! It is so wonderful to imagine, create, and enjoy the fruits of past labor.

  • @victorkarlsson5183

    @victorkarlsson5183

    2 жыл бұрын

    @@CrashOrganism Magnetic sensor.

  • @ronwhittaker6317

    @ronwhittaker6317

    2 жыл бұрын

    i learned a little thank you

  • @w.i.s.c.-wiingotsandcastin6641

    @w.i.s.c.-wiingotsandcastin6641

    2 жыл бұрын

    You've got yourself a new subscriber. While I was watching I kept thinking I could do that! Then reality set in. Great video.

  • @Platypus_Warrior

    @Platypus_Warrior

    2 жыл бұрын

    Well my previous comment had some quick effect haha

  • @horatiohornblower868
    @horatiohornblower8682 жыл бұрын

    Woodworking, metal working, turning, welding, hydraulics, electronics... There's no end to your skills. My deepest respect, Sir!

  • @tieniecloete9573

    @tieniecloete9573

    Жыл бұрын

    Absolutely

  • @MarvinConman

    @MarvinConman

    8 ай бұрын

    When a jack of all trades reaches master level.

  • @_Damian_.

    @_Damian_.

    6 ай бұрын

    It's also easy to overlook the fact that he had to set cameras, mics and lighting up to film each step of these various processes, and then edit hours and hours of footage into 40 minutes of his particular style of video on whatever computer software he's using so he can upload to KZread!👏🏾👏🏾👏🏾

  • @kooolainebulger8117

    @kooolainebulger8117

    6 ай бұрын

    most of it's transferrable

  • @dieSpinnt

    @dieSpinnt

    5 ай бұрын

    Just a guess: He has learned the trade and clearly knows what he is doing. The whole hydraulics setup reminds me of what you normally see in commercial industry grade hydraulics installations. That's why I thought: Brave! A rollable hydraulic unit (by design and function very vibration-intensive and therefore the enemy of all weld seams and seals!) but not a double-walled tank (expensive) or at least a safety collecting tray for minor accidents or leaks? You should probably plan for this, because if it's too late, cleaning and disposing of the oil can be really expensive and unpleasant. You won't see any hydraulics tank in the industry that at least rests on a safety tray. Well, just a thought ... hehehe:) Also: We drill all holes and make any cutouts in an electrical cabinet BEFORE mounting and wiring the electronics components in it. Yeah, that can not always be done with prototypes, so: Use some plastic foil or at least cloth to cover the components from metal swarf. And no, that is just something you do. The minute time it costs is simply not comparable to hours of sadness a single piece of metal shaving can hit you with. Did I say PROTOTYPE? We close every cover and secure every single connection or loose cables before testing. Especially those of the motor terminal block. Guess when most accidents happen? Right! When testing a prototype where nothing is clear and things may change. With open and unprotected mechanical or electrical parts, a simple accident or a hiccup ... which otherwise would just be an annoyance ... may turn into your LAST Project. Which is sad and easy preventable by paying attention and not getting lazy. Have fun making, live long and prosper, guys!:)

  • @NoWokeSpeak
    @NoWokeSpeak2 жыл бұрын

    If someone would have told me that I would sit and watch a 40 minute video that had zero spoken words, would have me glued to the screen in amazement as a 1 part engineer and 1 part wizard made an ingenious machine from scratch and out of the depths of his own mind all the while making me realize just how truly dumb I am, I would not have believed it! Well, I doft my cap to you sir because this video not only kept me entertained and wishing I could apprentice under you, it showcased your "makers" soul and the power of the engineers mind. Great vid, you earned a new subscriber.

  • @stormywilliams3697

    @stormywilliams3697

    2 жыл бұрын

    glad I'm not the only one that feels this way lol

  • @codeblue2532

    @codeblue2532

    2 жыл бұрын

    @@stormywilliams3697 :: loved it with no monologue OR. music !

  • @tedvanmatje

    @tedvanmatje

    2 жыл бұрын

    Same here Ethan. First video I've watched here and +1 subscriber 🤟😎

  • @G40bv

    @G40bv

    2 жыл бұрын

    That's why I like his videos. You don't need to listen stupid music or explanation... just sit watch and relax

  • @deanrichardson134

    @deanrichardson134

    2 жыл бұрын

    I second that! Great engineering

  • @mattbarrett41
    @mattbarrett41 Жыл бұрын

    It was in this moment that I knew my powers of workshop wizardry was so far surpassed, I wept a little. This man has understanding of both mechanical and electrical engineering that I will never have. I wonder if he’s self taught or formally educated

  • @DART2WADER

    @DART2WADER

    Жыл бұрын

    Ни какое "официальное" образование не поможет если нет интереса или желания заниматься этим.

  • @jbm11235

    @jbm11235

    6 ай бұрын

    Yup. I hate him too. 🤣😂🤣😂😉

  • @dontarguewafool955

    @dontarguewafool955

    6 ай бұрын

    I assume a little of both. Some people have a natural gift of creativity and hands on skill. Dyslexic people and dreamers are like that. I'm not assuming he is though.😌

  • @jeffmeyer9319

    @jeffmeyer9319

    5 ай бұрын

    @@DART2WADER А интересы и желания, которые дремлют, могут пробудиться, если их вдохновит такая возможность.

  • @tsquisch
    @tsquisch Жыл бұрын

    My mom and I thoroughly enjoyed watching this and the commentary was fun to read :) This is an absolutely great idea, but it’s not complete without a slide down to ground level, instead of having to lug the buckets down haha

  • @evellop
    @evellop2 жыл бұрын

    The craftmanship of "my mechanic" combined with amazing amounts of creativity, planning and steady execution. Love this project, very inspiring!

  • @badlarry172

    @badlarry172

    2 жыл бұрын

    both uploaded at the same time😁 great stuff, book press, briquette press.

  • @Jethro.Maloku-le.Rey.Kalsitran
    @Jethro.Maloku-le.Rey.Kalsitran2 жыл бұрын

    I first though "oh, yet another briquette press !" but it's not a press, it's a factory at legendary level lol you only forgot the robot that feeds the stove... nice job

  • @KallePihlajasaari

    @KallePihlajasaari

    2 жыл бұрын

    Automatic conveyor feeder in the next episode I suspect.

  • @mircomuntener4643

    @mircomuntener4643

    2 жыл бұрын

    Just chute the press outfeed right into the stove, switchable to a hopper when the stove id not being used.

  • @CorvidianSystems

    @CorvidianSystems

    2 жыл бұрын

    + an IR cam w/ computer vision to tell when the stove needs to be reloaded

  • @carmensolera2341

    @carmensolera2341

    2 жыл бұрын

    The robot, for the nex video......😆😆

  • @Automedon2
    @Automedon2 Жыл бұрын

    When I saw the thumbnail I though "that's something I'd like to do". Thirty seconds in it was "ok, never mind". What a remarkable young man!

  • @billhouse1090
    @billhouse10904 ай бұрын

    This is true engineer that had a problem for a while. It finally pissed him off so he decided to fix it once and for all. Took his time and thought through every part of the process and fixed his problem for good.

  • @pebblesthecat3625
    @pebblesthecat36252 жыл бұрын

    When I saw the title I thought "Oh great.... a nice little briquette maker. I will watch this closely so I can make one and use them on my open coal fire in my lounge." After viewing the opening sequences showing you unpacking your pre cut steel and the size of the hydronic ram I rather quickly revised my ideas and decided this project was going to be just a little above my pay grade and to just simply enjoy watching the video and learning a few things for future reference.

  • @danielstellmon5330

    @danielstellmon5330

    2 жыл бұрын

    This is the internet age, go online, learn, raise your pay grade.

  • @jimberg9243

    @jimberg9243

    2 жыл бұрын

    kzread.info/dash/bejne/hIp40ZuGkqvdgLg.html

  • @keithmarlowe5569

    @keithmarlowe5569

    2 жыл бұрын

    I have a pellet grill, and I'm also skilled in dust fabrication. I had similar thoughts as you, both the before and after.

  • @us7876

    @us7876

    2 жыл бұрын

    Well you could increase thread pitch for higher speed and reduce the final pellet/rod diameter so yo wouldn't have to deal with big expensive motors and pistons

  • @corybuckles8492
    @corybuckles84922 жыл бұрын

    This is a man who believes in his heart that if something is worth building, it's worth overbuilding.

  • @spencerbrotherson9061

    @spencerbrotherson9061

    2 жыл бұрын

    My personal motto is that if something is worth doing, it's worth overdoing. I love this project way more than I should. I thought I was good at over-engineering projects, but this is almost Rube Goldberg-ish without quite getting to that level of absurdity. I absolutely approve. If I did enough in my wood shop to warrant this kind of dust collector reclamation I would probably try to build one of these, but thankfully I don't. My wife does want to redo the kitchen and put in new cabinets, though...

  • @rolliekelly6783

    @rolliekelly6783

    2 жыл бұрын

    @@spencerbrotherson9061 I think in some way this fellow is related to Nick Blackhurst!

  • @jonasstahl9826

    @jonasstahl9826

    2 жыл бұрын

    Where is it overbuild, that is pretty much the way to do it.

  • @bobd9193

    @bobd9193

    2 жыл бұрын

    @@jonasstahl9826 I agree totally, it wasn't overbuilt in the least as far as I'm concered, it was built right. He did what was necessary to make it work corectly without cutting corners. A very well put together piece of machinery. Kudos to you Sir.

  • @jonasstahl9826

    @jonasstahl9826

    2 жыл бұрын

    @@bobd9193 Sure the m16 hardened threated rods look extremly beefy and he uses 4 of them. Each can hold about 16t thats alot, but when you think about that the press is able to up too 20t if the controls fail, it is just a safety factor 3.

  • @carlossenos980
    @carlossenos9802 жыл бұрын

    No dumb music or stupid narratives it's definitely something the mechanically inclined would love watching and appreciate...awesome video sir 👍

  • @labtrainer09
    @labtrainer09 Жыл бұрын

    Hi, Russ. Commenter "NoWokeSpeak" (below) literally took the words out of my mouth. I know very little about machining, welding, hydraulics, electrical systems, etc., yet I was RIVETED by every minute of this video. In addition to being astounded at your skills, knowledge, and instincts, I was truly impressed at your positioning of the camera, which captured so effectively the complex process involved in this build. Russ, watching you work was a privilege, and I'm VERY grateful. All the best, Chris (Maine, USA)

  • @comradealex85
    @comradealex852 жыл бұрын

    The craftsmanship, ingenuity and blatant disregard for heath and safety is what truly makes the British craftsman the best in the world! 🇬🇧

  • @beakittelscherz5419

    @beakittelscherz5419

    2 жыл бұрын

    Also they not only have the disregard for heath ,- they even invented the Heathcliff himself 😁😁

  • @janalberts7073

    @janalberts7073

    2 жыл бұрын

    🇩🇪🇯🇵🇺🇸 is all crap compared with 🇬🇧is’nt it ? But this Guy is doping an amazing job 👍

  • @janalberts7073

    @janalberts7073

    2 жыл бұрын

    @J Hemphill the first flag is German not Spain. But nevertheless ,this guy from Yorkshire does absolutely incredible things. I admire his craftmanship very much. Best regards from 🇳🇱

  • @MikeAG333

    @MikeAG333

    2 жыл бұрын

    @J Hemphill "Yorkshire" in the title wasn't enough of a clue, then?

  • @BadYossa

    @BadYossa

    2 жыл бұрын

    @@beakittelscherz5419 You won the Internet!

  • @paulbrady9454
    @paulbrady94542 жыл бұрын

    I was Designer/PM on the build, delivery and running of an industrial version of this producing but with 12" square Polystyrene bricks from fluff (cut up polystyrene). The silo was 20M tall 3M diameter and the compactor 10M in length. Yours is a fantastic job. Just some tips, PUT IN A TEMPERATURE CUT OFF RELAY. buy a cheap temperature clixen (click out at a certain temp, say 85C) and run it through a relay to shut everything down if your feed end reaches 85C. You will seriously regret it if you don't, machine wear, ambient temperature and material variation could easily push the exit temperature up to ignition temperature for the dust. Trust me, running a system like that with a fixed size outfeed will generate heat over time. Don't forget you installed this in winter, how hot does that loft get in summer? Also, this may be overkill but we used a hydropneumatic accumulator instead of fixed dimension on the exit end. This works like a spring, pump it up to the required pressure in the oil end and the air compressed to keep a constant pressure. In other words, we exerted constant pressure, not a constant gap size. This reduced the ram pressure and kept the temperature from climbing in the compression tube as the gap could open ever so slightly if the material started getting hot. You could try a cylinder and maybe an old mini sphere? Possibly overkill given the diameter. You don't need your agitator to sit under the whole pile of sawdust. Put a baffle plate in the hopper pointing downward towards the open inlet you only need to agitate the hopper feed not the whole weight of the silo. Instead of using compressed air you can fit a vibrator (a motor with an offset weight securely connected to the hopper) on a timer which only runs for a few seconds attached to the baffle plate which will move the material down. Good luck.

  • @kenherbst9460

    @kenherbst9460

    2 жыл бұрын

    Very good info and very nice of you to share your knowledge.

  • @Fractus

    @Fractus

    2 жыл бұрын

    Some good ideas in this, thanks for sharing. I was mainly worried about the temperature increase in summer and/or doing a project that kicked a lot of heat out that gathered in the top levels of the workshop.

  • @zyanidwarfare5634

    @zyanidwarfare5634

    2 жыл бұрын

    This is some hot knowledge right here

  • @IsaKocoglu

    @IsaKocoglu

    2 жыл бұрын

    To everyone concerned about winter vs summer vs combustibility: I wonder if this will be running through summer as well? With that setup, I guess it does look like it will… but needed to ask either way.

  • @zeebeezoey

    @zeebeezoey

    2 жыл бұрын

    could one weld some fins onto the outfeed to help it dissipate excess heat?

  • @lonnieosullivan1331
    @lonnieosullivan1331 Жыл бұрын

    An honest youtube creator, not only does he show the build but all of the bugs that have to be worked out to make the idea viable.

  • @dennisrichardson4410
    @dennisrichardson44102 жыл бұрын

    I am somewhat stupified and feel a bit stupid you are a genius and make your work look so easy. I am a 76 year old admirer in canada thanks for the video

  • @Vormulac1
    @Vormulac12 жыл бұрын

    That is the most extraordinary way to avoid having to empty a vacuum cleaner I've ever seen! Wow, what a project! Well done and Merry Christmas! Subscribed.

  • @raymondo162

    @raymondo162

    2 жыл бұрын

    and the most expensive........................?? by FAR

  • @davidschwartz5127

    @davidschwartz5127

    2 жыл бұрын

    @@raymondo162 I was also thinking something, but after some, though; he is also generating a winter fuel supply for the shop plus the coolant water recirculating thru a radiator with a fan behind is also a source of heat for the shop. So, there is a payback for the materials cost and labor time.

  • @jormakesanen416

    @jormakesanen416

    2 жыл бұрын

    And then you still have to build Kinda forklift for taking those briketts to downstairs... (I should have thought that in a first place, damn it!)

  • @rhamlet5290

    @rhamlet5290

    Жыл бұрын

    @@davidschwartz5127 No need for a radiatior. Heat doesn't disappear. The machine is inside the shop, therefore heating it.

  • @genewitch

    @genewitch

    Жыл бұрын

    as far as "just to avoid emptying" this also provides a way to provide for your home heating and neighbors too, assuming they have heat exchange like the one shown in the video. Secondly, for getting them "downstairs" they look pretty solid, a staggered, padded (with rubber or whatever) staircase they can fall down would work, or just run that PVC pipe down, at a slight angle, or an open top spiral (to unjam it if necessary) But then you need an overfill sensor and stuff. Best to not automate everything, i guess.

  • @D...........33
    @D...........332 жыл бұрын

    The most environmentally way to get rid of your sawdust. Absolutely amazing.

  • @Auriflamme

    @Auriflamme

    2 жыл бұрын

    I'm not being glib or holier than thou, but technically he is releasing the carbon when he burns the briquettes. If you want the most environmentally friendly solution, that is to compress the sawdust to reuse it as a building material. Of course this is still more environmentally friendly than burning lumber or fossil fuels.

  • @twocvbloke

    @twocvbloke

    2 жыл бұрын

    @@Auriflamme It's the carbon cycle; Fire releases carbon, carbon absorbed by trees, trees become wood, wood becomes sawdust, sawdust becomes briquette, briquette becomes fire, and repeat... :)

  • @dogbreath6974
    @dogbreath69742 жыл бұрын

    Stumbled onto this last night, love these type of videos, no annoying music just the sound of someone working, quite funny in parts. Great video.

  • @dazzx10r
    @dazzx10r Жыл бұрын

    That's the best 40 mins I've just spent on KZread. I salute you young fellow Yorkshireman.👏

  • @bettyswollocks5278
    @bettyswollocks52782 жыл бұрын

    Is there no end to your talent? This is genius!

  • @Scrivscribe
    @Scrivscribe2 жыл бұрын

    This needs to become a product, every wood processing workshop with dust extractors should have one of these. Love your work mate!

  • @skeetsmcgrew3282

    @skeetsmcgrew3282

    2 жыл бұрын

    Sure no problem, just $5000 with installation lol

  • @erzbengelraziel5490

    @erzbengelraziel5490

    2 жыл бұрын

    These are a product, it's just not cheap

  • @Sugarsail1

    @Sugarsail1

    2 жыл бұрын

    I don't do much wood working but I make fire starter briquettes by melting paraffin in the oven with the sawdust, mix it up and just press it by hand into a pipe, the wax binds it together without needing a hydraulic press but doing this automatically would be nice.

  • @fredscheerle7592

    @fredscheerle7592

    2 жыл бұрын

    @@Sugarsail1 I do the same, but use shredded cardboard not paraffin as binder as paraffin aren't cheap here!

  • @RabbitsInBlack

    @RabbitsInBlack

    2 жыл бұрын

    The Cheaper way, you buy a pellet extruder. Like Pasta extrusion. Because his way is more expensive to produce.

  • @doacarnage
    @doacarnage Жыл бұрын

    I used to work at a presto-log factory in the early 80's. The sawdust was forced through a die with a screw, it created tremendous heat and pressure. You had to be careful not to stand in front as sometimes log pieces would fire out like a cannon.

  • @malkeus6487

    @malkeus6487

    Жыл бұрын

    Ah yes, the incredible insanity that leads to shredding perfectly good logs into sawdust that you then press into the shape of a log...

  • @skytek7081

    @skytek7081

    8 ай бұрын

    In practice, it's scraps, ends, splintered boards, the top of a tree that is too thin for making boards, the sawdust from milling activity, misc wood like that, meaning the waste from creating finished lumber and other wood products is not.. well... wasted.@@malkeus6487

  • @Nevir202

    @Nevir202

    6 ай бұрын

    @@malkeus6487 You realize that's not generally what happens yes? It's re-use of waste from milling operations.

  • @dorriennorth5317
    @dorriennorth5317 Жыл бұрын

    I lost you when you picked up the first piece of wood.... So professionally put toghter... You Sir are one of a kind. 🏋️‍♀️👍

  • @jakobnordin
    @jakobnordin2 жыл бұрын

    9,9 out of 10! If the piping would have continued down the ladder to a collector next to the stove it would have been a 10! Great work!

  • @paulrosebush9137

    @paulrosebush9137

    2 жыл бұрын

    and automate the stove feed as well.

  • @Mr2at

    @Mr2at

    2 жыл бұрын

    And the stove automatically brewed a cup of tea.

  • @paulrosebush9137

    @paulrosebush9137

    2 жыл бұрын

    @@Mr2at Let's not get carried away. Coffee before Tea.

  • @georgeberrill4834

    @georgeberrill4834

    2 жыл бұрын

    @@paulrosebush9137 Not in my shed it ain't 🤣

  • @paulrosebush9137

    @paulrosebush9137

    2 жыл бұрын

    @@georgeberrill4834 :)

  • @kookiedabear
    @kookiedabear2 жыл бұрын

    Well done! The only suggested improvement I'd make is to build a simple overhead track maze for the pellets to roll down so you aren't manually transporting from above.

  • @allanlindskoog

    @allanlindskoog

    2 жыл бұрын

    I expect he'll create something that feeds them one at a time into the firebox. Some robotic forceps that grab one, opens the door, pops it in, and closes the door again.

  • @jayschafer1760

    @jayschafer1760

    2 жыл бұрын

    I was thinking of extending the chute into a metal drum lined with a heavy duty plastic bag... Need to be able to stockpile the briquettes over the summer and keep them dry for the winter.

  • @lemagreengreen

    @lemagreengreen

    2 жыл бұрын

    I was thinking maybe some sort of spiral made from heated PVC pipe, not sure how it is for forming but maybe... spiral it around a cylinder and you might be able to get it to work.

  • @devandestudios128

    @devandestudios128

    2 жыл бұрын

    I thought just a simple shoot, then I read your comment and realised how in error I was in my simplicity. A simple shoot is far too easy for this mans skillset, and just wouldn't fit with the briquette press.

  • @markfryer9880

    @markfryer9880

    2 жыл бұрын

    @@devandestudios128 Well the briquettes are round cylinders so why not put that to good use and have them roll down to the storage box and fireplace feeder.

  • @paulone-off7286
    @paulone-off72862 жыл бұрын

    That's a great bit of engineering right there. Wasn't sure when I started watching how far this was going to go, but very impressed at the work involved and the end result. Even though it was well designed and planned, like the fact you showed the faults and corrected them. Fascinating viewing for 40 mins in silence 🙂

  • @hippyhappyhippo
    @hippyhappyhippo2 жыл бұрын

    This was a lot more sophisticated than I originally thought it'd be. Really interesting.

  • @Preso58
    @Preso582 жыл бұрын

    What a heroic build! Your problem solving approach is truly commendable. It's nice to see the waste being turned into energy instead of going to landfill.

  • @ericfraser7543

    @ericfraser7543

    2 жыл бұрын

    The question is the energy used to make the bricks equivalent to the energy produced burning the the bricks?

  • @Preso58

    @Preso58

    2 жыл бұрын

    @@ericfraser7543 I did consider that a heat pump/reverse cycle air conditioner is probably way more efficient and less polluting but the waste wood is being generated anyway. It's one of those cost/benefit things. If the waste wood has to be transported to land fill there might be a trade off if it's just processed on site?

  • @ericfraser7543

    @ericfraser7543

    2 жыл бұрын

    @@Preso58 agreed, if he is heating his shop with wood that he has to source elsewhere it is also a win for him. he could also power his pellet press using solar if he wants to make the process greener.

  • @narmale

    @narmale

    2 жыл бұрын

    at least the wood dust wouldnt have been an issue for decomposing like all the plastic -.-'

  • @groundspeed3954
    @groundspeed39542 жыл бұрын

    Your channel is THE posterchild for inspiration, craftsmanship, and perseverance in the industrial arts. I'm humbled by your work.

  • @bobmcboblin
    @bobmcboblin11 ай бұрын

    I love how you use the unfinished machine as a hydraulic press. It is so obvious but so smart at the same time.

  • @screamingwilson
    @screamingwilson4 ай бұрын

    The rewatch value of your videos is insanely high!!

  • @xombies
    @xombies2 жыл бұрын

    This is probably the greatest video I have ever watched on KZread. And I watch a LOT of YT.

  • @carolinacontingencyllc7809
    @carolinacontingencyllc78092 жыл бұрын

    I’ve never watched your channel before but have a sawmill and burn wood so I thought it an applicable project. I kept watching because of your extremely wide skill set. We own a plumbing company in the us and can barely done people who can competently read a tape measure. Thoroughly impressed also jealous of the wildly variably amount of tools you have at your disposal to meat your widely available skill set. Hats off too you sir!

  • @glOckcOma

    @glOckcOma

    2 жыл бұрын

    I would be careful criticizing people that cant "Competently read a tape measure", because they can easily turn around and criticize your lack of grammar, spelling, and sentence structure of your comment. Not trying to be a jerk, just saying everyone has their strengths and weaknesses.

  • @idontthinkso666

    @idontthinkso666

    2 жыл бұрын

    @@glOckcOma Dude, glass houses and all that! (cant? can't?)

  • @glOckcOma

    @glOckcOma

    2 жыл бұрын

    @@idontthinkso666 Really an apostrophe. LMAO!!!

  • @phillamoore157
    @phillamoore157 Жыл бұрын

    I can finally say that I don't want my 40min back. I just spent the better part of an hour watching a man make a machine that turns saw-dust into "briquettes".....and loved every minute of it. Unbelievable.

  • @Amdraz
    @Amdraz Жыл бұрын

    Absolutely epic, continuous and practical engineering process... Highly effective editing, showing every step and so many "Would I think of that? Probably not" moments. Looks like you did the whole thing in about a day as well. Great work! I hope you have an apprentice...

  • @My_Op
    @My_Op2 жыл бұрын

    I had no idea you were such a versatile fabricator! It's quite mesmerizing watching you work, thanks! 🤍

  • @leonardschrock4987

    @leonardschrock4987

    2 жыл бұрын

    Off topic comment for Lucas Schnock. I like your name. I have been collecting different spellings of my last name. Yours makes 30 on my list. Some on my list are more than a little different.

  • @My_Op

    @My_Op

    2 жыл бұрын

    @@leonardschrock4987 Schnock means mosquito in Alsatian and fool in French. Look up D'r Hans im Schnokeloch for more info.

  • @leonardschrock4987

    @leonardschrock4987

    2 жыл бұрын

    @@My_Op That is interesting. Thanks

  • @Furnitecture
    @Furnitecture2 жыл бұрын

    Absolutely brilliant. I always hated throwing out sawdust, feels so wasteful; this is a very clever solution 👏

  • @dethmaul

    @dethmaul

    2 жыл бұрын

    Put up an ad for composters in your area. Maybe it can be used for garden compost, and it definitely can be used for a composting toilet.

  • @Furnitecture

    @Furnitecture

    2 жыл бұрын

    @@dethmaul great tips, will look into it!

  • @guylarawayjr571

    @guylarawayjr571

    2 жыл бұрын

    I know an industrial arts instructor. He keeps his saw dust in 4x4x4 boxes. Buries his green turned bowls in it to slowly dry. Seems to work quite well.

  • @SToNeOwNz

    @SToNeOwNz

    2 жыл бұрын

    i found that i could burn saw dust by wrapping it in paper like an oversized candy or Christmas cracker, the paper turns almost charcoal-like and protects the dust from flame licks and reduces the airflow so the dust bakes and compacts before it finally burning. i do suspect mileage may vary but its minimal effort for free firewood.

  • @sheilamclaughlin963

    @sheilamclaughlin963

    2 жыл бұрын

    Sawdust makes good absortant for oil spills in the and might burn in a stove, compost makes a lot of sense since most of the most fertile soils in the world were under trees or tall grass

  • @jamisonr
    @jamisonr2 жыл бұрын

    That's amazing. Just when I think I've seen all the great builders, I find another channel that ups the ante.

  • @Justforfun-ek7et
    @Justforfun-ek7et2 жыл бұрын

    Incredible! This was so much fun to watch you troubleshoot and get this machine working as hard as you do.

  • @mortofromoz1
    @mortofromoz12 жыл бұрын

    After watching the whole process, I feel even more inadequate and full of admiration for you. There are many hours of development in that little project.

  • @lamnad
    @lamnad2 жыл бұрын

    As someone who both hates waste and has taken a class in hydraulics, THis was fascinating.

  • @thetacticalfuturist588
    @thetacticalfuturist5885 ай бұрын

    I love watching skilled craftsman with unlimited budgets!

  • @davemason1079
    @davemason1079 Жыл бұрын

    This is excellent. You’re a talented dude: metal fab, hydraulics, electronics, wood working. Thanks for putting this together!

  • @PHUSII
    @PHUSII2 жыл бұрын

    Very nice setup! A few things that come in mind: Maybe add some kind of a seal on the side where ram goes in so no dust comes out from the air puff and make the micro switches clogged up and stop working. Also you should think of some kind of sprinkler system inside or on top of the funnel where the sawdust is as its constantly mixed and air added, making it highly flammable. So if it would combust in any case, you could easily save the shop. Just my 2 cents :)

  • @billymacmakes
    @billymacmakes2 жыл бұрын

    I was about 25 minutes in before I knew what you were building, but I knew I wanted to watch because I love everything you do! Your talent is diverse! Very impressive. Thanks for sharing.

  • @DEMON-ts4qx
    @DEMON-ts4qx Жыл бұрын

    this is absolutely insane, this is very complicated, i was shocked while watching the video, i found out about your channel from the "Making a glass ceiling" video, but now this video is on a whole other level, i can't wait to go through your channel and watch all other things you made, and i can't wait to see what's to come.

  • @MrProtector65
    @MrProtector652 жыл бұрын

    Old man watching the young man changing the world for the better, thankyou, regards.😺

  • @marcf5550
    @marcf55502 жыл бұрын

    Just watched a fellow build an engine from scrape and now this and all of it with no talking. WOW lots of talent out there. I really enjoyed it.

  • @BadYossa
    @BadYossa2 жыл бұрын

    That was one of the most fascinating videos I've seen in a while. Mate, that was quite an incredible wee journey! Cheers for sharing what goes on in the murky recesses of your crazy mind! 11/10

  • @jherloev
    @jherloev Жыл бұрын

    An ingenious solution to a very common problem (turning waste in to valuable), I loved how many skills you had up your sleve and using a simple scissor jack when nothing more was needed. Liked and subscribed.

  • @12heebs
    @12heebs Жыл бұрын

    Impressive build! You are an excellent fabricator and engineer!

  • @rmc489
    @rmc4892 жыл бұрын

    About half way through this video I realised you're not over building this, this is production level at its finest :)

  • @williamruddell6819
    @williamruddell68192 жыл бұрын

    Hypnotizing - a total pleasure “watching over your shoulder” as you encountered and overcame each obstacle. Score a big win for perseverance in the face of adversity. Well done!

  • @tormunch-petersen3806
    @tormunch-petersen3806 Жыл бұрын

    This is one of the most calming and informative videos I have ever seen! While in a near meditative state, i was filled with enlighting knowledge. Thank you very much!

  • @bobbyburnette8764
    @bobbyburnette8764 Жыл бұрын

    Extremely Talented individual with no talk and no BS, great video.

  • @carmenschumann826
    @carmenschumann8262 жыл бұрын

    . . . NICE ! I never thought that such a 'simple' machine would demand so much of planning and engineering to work properly . . . my sincere recognition !

  • @felixjuanrecarteflamarique4406
    @felixjuanrecarteflamarique44062 жыл бұрын

    Admirable! Only one idea: I have made millions of Pharma tablets (basically, the same process) and a tiny amount of lubricant make the pressure get down. Let me sugest diesel oil or used car oil (sprayed) or some cheap soap (powdered). You can easily test with a hand spray botle. Thank you for your effort, and sorry if I've repeated other comment. Its impossible to read everything.

  • @josephmiller997

    @josephmiller997

    2 жыл бұрын

    Had the same thought.

  • @amdidextrous

    @amdidextrous

    2 жыл бұрын

    @@josephmiller997 Yep, chip fat or engine oil (both free) work well.

  • @grunthos1
    @grunthos1 Жыл бұрын

    I would add a mist injector that would puff a small spray of liquid paraffin over the wood chips as they fell into the compression chamber. This would help with ignition, repel moisture, and more importantly lubricate the pressed chips as they pass through the compression tube.

  • @dieSpinnt

    @dieSpinnt

    5 ай бұрын

    Sure. The mineral oil component would also turn the briquettes into a whole other material class, with different safety regulations and more rigorous storage requirements. You did thought about that, yes?:) Also: Nope, wood has its own natural lubrication with lignin and contained resin. Moisture evaporates in storage without anybody even moving a finger. No need for CONTAMINATION with "additives". Man, the final product is used to BURN IT! Not as some design student art project ... (At least I think so?!:) ) Edit: Or if it is not burned(was an assumption) ... maybe recycled into filler material, or the biological way in the methane/bio-diesel path. Anyways ... think about it. You will turn that wood with the addition of paraffin into "dangerous goods" (the material class) that must be disposed of in a landfill or in a special burning facility. Oh ... and you are willing to use precious hydrocarbons for ... GARBAGE, to throw it out of the window? Are you really sure?:))) The problems we see in the video are design problems and not that of lubrication. Professional presses do not have flat punches and the compression tube is at least partially conical. Throughput must become easier for the material in the direction of ejection and not the other way around. Teflon coatings after the compressor restriction can also help. But that costs a lot. People think really to much and in the wrong ways and get too fancy(Its entertaining, educating and nothing is wrong trying some new approaches). You can clearly see here what the motivation was about: Nice BRIQUETTES! (And primarily getting rid of that annoying dust and having to change the even more annoying bag). The only goal here is to compress the dust, because for better storage of the garbage. That is easily achieved with one electric motor and two rotating rollers running against each other. This is just a press of a different design. No need for electronics or clogging of complicated mechanisms. You can even (gravitation!) feed directly into the compression element which produces sheets of compressed wood instead of briquettes. That also can easily be turned into a "dough snake" with appropriate nozzles or roller profiles, which looks the same at the end.

  • @HeavyIronsProduction
    @HeavyIronsProduction5 ай бұрын

    This is what a high school curriculum should look like

  • @thelonetwangster
    @thelonetwangster2 жыл бұрын

    Dude, that is bloody amazing. In awe of your engineering talents.

  • @siagstas5535
    @siagstas55352 жыл бұрын

    Wow, what a combination of skills and the will to perfection and to bring things to a working status and end! I did not expect that you have so many metal working machines... Thank you for showing, what is possible!!

  • @bullpaxton2001
    @bullpaxton2001 Жыл бұрын

    This is one of the coolest builds ive seen in awhile. So nice to turn the pain of saw dust into free firewood!

  • @timmymartin317
    @timmymartin3172 жыл бұрын

    Color me impressed. I have only watched your turntable builds and had no idea your skills were so vast.

  • @goldpython2263
    @goldpython22632 жыл бұрын

    Outstanding! This guy's from the same family as the person who starts with a rock and gives you a perfectly symmetrical spearpoint you could shave with.

  • @SkyOctopus1
    @SkyOctopus12 жыл бұрын

    Having never viewed your channel before I was thinking "oh, a neat quick and dirty hack" followed by being bamboozled by the amount of effort and fine tuning going into this. Then saw your giant sawdust-o-matic and it all became clear! Very nice job!

  • @kevinhathaway7240
    @kevinhathaway72402 жыл бұрын

    Well done! What fine skills you have. Woodworking, machining, welding, hydraulic, electrical, controls, and the wisdom to make them all work together!

  • @live2thrive249
    @live2thrive2495 ай бұрын

    I can't get enough of your videos! Your mastery and amalgamation of so many different trades is inspiring. I suck at metalwork but somehow feel like I could take on projects like this now. Thanks for sharing these projects

  • @woodstoney
    @woodstoney2 жыл бұрын

    This was such an amazing and satisfying video for me to view. I enjoyed watching this man's skill set in so many disciplines! Well done!

  • @danielhurst4744
    @danielhurst47442 жыл бұрын

    What a pleasure to watch a true engineer in action - impressive stuff. Love the videos that you make - without constant inane chatter, and simply watching a very skilled man go about his work.

  • @pitsnipe5559
    @pitsnipe55592 жыл бұрын

    At one time during my professional life I would conduct risk assessments of industrial facilities. Always enjoyed learning the details of the various processes and machinery used to make things. Thanks for a great video. Very impressed with your various skill sets. A young man with a great future.

  • @____________________________.x
    @____________________________.x6 ай бұрын

    That was really impressive, there was a lot of different skills in making something like this, it was a surprisingly complex process. Well done 👍

  • @thekarmafarmer608
    @thekarmafarmer6082 жыл бұрын

    For me, this is the definition of inspirational; keep solving problems until you achieve. Great video. Thanks for posting

  • @Gabe-zz5gw
    @Gabe-zz5gw2 жыл бұрын

    this was amazing. this is by far some of the most skill I've seen someone demonstrate on youtube. thanks for sharing this amazing work

  • @johnstevens1192
    @johnstevens1192 Жыл бұрын

    I wouldn't have the first clue on how to go about making this but my inventive juices started to flow as soon as I began watching this and so I sat through the whole thing loving every bit of it. Well done. It was an engineering marvel.🇦🇺👍

  • @razvanbutiac7684
    @razvanbutiac76842 жыл бұрын

    Great idea, and I like how you recover / learn from initial mistakes. Nice!!!

  • @fredrichardson9761
    @fredrichardson97612 жыл бұрын

    Some really amazing engineering and adaptive design at work there - nicely done! Outstanding result! And yeah great way to transform that sawdust into something useful.

  • @titantitan2851
    @titantitan28516 ай бұрын

    I think I watched this 4 times already and many more views to come.. incredibly complicated build.. well done.

  • @FIL357
    @FIL3574 ай бұрын

    Fascinating. It’s as watching an illusionist drawing the audience in before the master stroke and revealing all. This the second video I have enjoyed . Thank you. Phil - Suffolk.

  • @lynxg4641
    @lynxg46412 жыл бұрын

    Damn Dude, that's some impressive engineering. Didn't know you were a problem solver and worker in any material, that setup is super trick. So much dust, will keep your little oven well fed over winter and maybe even start a side business and s ell them.

  • @miller745
    @miller7452 жыл бұрын

    Came for the woodworking, stayed for the engineering!

  • @alangoode8354
    @alangoode83545 ай бұрын

    I didn't understand any of this but still watched it to the end... brilliant

  • @timecowx
    @timecowx6 ай бұрын

    This was so much more than I expected! Very impressive!

  • @nweston5070
    @nweston50702 жыл бұрын

    Really enjoyed that - seeing the refinement process is what sets your work apart for me. However… Dust, compressed air, acrylic sheet to build up static… maybe you should think about how to earth any static build up away in your hopper. No problem in a damp Yorkshire winter, but a lovely dry summer day could see sparks and you don’t want your own Bosley Wood-flour Mill event.

  • @NewYorkshireWorkshop

    @NewYorkshireWorkshop

    2 жыл бұрын

    ye I was thinking about that yesterday, ill run some tracks of that copper tape I used to earth the pipes on my cyclone attachment

  • @samuelfellows6923

    @samuelfellows6923

    2 жыл бұрын

    And the constant noise it makes 😣 - would you put up with it? I certainly wouldn’t ☹️. I wonder what would happen if it runs out of sawdust? And how does the heat-exchange work?

  • @lordstylesofliwitch
    @lordstylesofliwitch2 жыл бұрын

    I just loved this!!! 😃 Well done Sir! It was as informative as it was inspiring and entertaining. You had me mesmerized with an appreciative smile during the entire video. 😊 On several occasions I had to rewind a bit to watch some part or detail of the build. This is precisely the kind of projects that I'd love to do. I'm ok with the electronics and the woodworking, trying to improve on my machining skills, but I'm a total n00b on hydraulics. Good video and scene lengths for this kind of project. Good use of camera angles and great comments all through the video. Your ISO standard squint made me laugh out loud. 😁 I also appreciate the absent noise of irritating music. Here I much prefer the lovely sound of machines. ⚙ You have earned yourself another subscriber. 👍

  • @maccliff2115
    @maccliff2115 Жыл бұрын

    The pleasure of watching was all mine. This was something we did every day in the oilfield. Same parts and technical principles. Great work!

  • @kevinsheridan9177
    @kevinsheridan91772 жыл бұрын

    Very well done I especially like how you did not edit out out the trial and error part of this build. You are very ingenius

  • @andrzej3511
    @andrzej35112 жыл бұрын

    I would never have thought in my life that the briquette press is such a complex problem. I imagined it was just a piece of pipe in which the chips were simply compressed - the harder the better. Meanwhile, the cylinder with the piston is the least important element of the problem. The press came out very well, and its most important distinguishing feature is that it works very effectively, without the slightest user interference. Simply: turn on - off. I like it, this is the best!!! Thus, you have solved two problems: disposal of shavings and heating the shed. I sincerely express my appreciation for both the approach to the problem and Your proprietary solution to the press. P.S. What's next? Automatic briquette dispenser from the press directly to the stove? I am writing this half jokingly - half seriously. However, if you did something like that it would be the absolut World Masterpiece!!!

  • @mikefisher9992
    @mikefisher99922 жыл бұрын

    That is fantastic I assume the next project is an auto feed into the stove😀😀 and it wouldn’t surprise me if it was!

  • @MYEVILTWIIN

    @MYEVILTWIIN

    2 жыл бұрын

    I think that’s what you call an apprentice !

  • @ajbowers44

    @ajbowers44

    2 жыл бұрын

    Hear me out here. Stove on the other end of the shop, auto loading pneumatic cannon to shoot these pellets across the shop into the stove.

  • @HRVProjects
    @HRVProjects Жыл бұрын

    Squint in accordance to ISO had me in bits. Subscribed.

  • @immanutt4442
    @immanutt4442 Жыл бұрын

    YOU SIR ARE ONE OF THE BEST IN EVERY ASPECT OF ALL CRAFT - KUDOS AND ACCOLADES TO YOU SIR !!! YOU ARE AN ARTESIAN

  • @chewieone1064
    @chewieone10642 жыл бұрын

    This channel is becoming ever more amazing, I think I can spot some talent here 😅

  • @Xiph1980
    @Xiph19802 жыл бұрын

    Next time I wouldn't weld that ram, but make a bracket to support it, use a collet clamp around the ram, or cut threads on the end to screw it in place. Piston/bore tolerances are very tight, and welding can warp the bore making it essentially a useless paper weight. It can also introduce micro-fractures that could eventually lead to a leak, with all the risks of hydraulic fluid injections. Do not google that if you're not very tolerant to gruesome pictures.

  • @amdidextrous

    @amdidextrous

    2 жыл бұрын

    Yes, I worked as a welder for 45 years, I find it hard to believe that the bore of the ram cylinder was not distorted by the welding, in fact the ram stuck at the weld level whilst he was inserting it.

  • @GordonFreeman69

    @GordonFreeman69

    2 жыл бұрын

    I've always been a bit leery of working with high pressure hydraulics. If a pin hole or small crack appeared, how far away could it seriously injury you (not including orifices ;))? I'm guessing 3 feet?

  • @vintyprod
    @vintyprod2 жыл бұрын

    As a student of industrial engineering, this was an absolute joy to watch.

  • @tylerdavidson6879
    @tylerdavidson68792 жыл бұрын

    I completely forgot what you were making while I was watching the video but there is no way I was gonna stop watching you make it. Great video

  • @GreyTigre
    @GreyTigre2 жыл бұрын

    Loved this video. It was absolutely fantastic to see to see the whole project come together. The finished product is a long, long, way forward from the one I tried where one puts paper pulp, into a metal box and then squeeze the water out by hand, and you get a sort of a soft Briquette that you then leave to dry out like turf in summer weather only. I gave up the idea but I did wonder if I had a pressure plate to push the water out of the Briquette it would make a better quality and longer lasting product when burning. We need more people with innovation like you man. Congrats and long may you come up with brilliant ideas.

  • @gangleweed

    @gangleweed

    2 жыл бұрын

    Yes....I get tons of cardboard from boxes and other recycled paper.......if I had a wood burner I'd make something to compress them like this. I used to make wood chip from tree prunings to heat my tin shed with a home made wood burner made from a 25 litre drum back in the 80's.....it worked well but I've gone electric once the garage was built.

  • @____________________________.x
    @____________________________.x6 ай бұрын

    Try using inductive limit switches. Those mechanical switches are only intended for clean environments. I’d think about adding some LEDs to indicate what is going on, because it makes maintenance easier when something breaks.

  • @danielboles6837
    @danielboles6837 Жыл бұрын

    From a metal worker, in two words, absolutely beautiful !!!

  • @Boomie373
    @Boomie3732 жыл бұрын

    I'm an industrial mechanic at a laminate flooring plant. This is the first time that I have seen a briquette machine outside of our facility. Ours uses water and heat to control the density of the briquettes. The outfeed is a continuous log that feeds into trailers and gravity breaks it into small logs. I did enjoy a different look at diy build, keep up the good work.

Келесі