Wishing I had money so I could have an "I'll take your entire stock." moment. Beautiful, as always.

Just for reference for people, RAW malachite is toxic to humans. Jewelry is fine but do NOT mix raw malachite with water or inhale the dust

@notsure1350

2 жыл бұрын

So snort it and make tea with it?

@katinjegat

2 жыл бұрын

@@notsure1350 only after cooking it so it isn't raw anymore

@nlmvanderburg

2 жыл бұрын

Shouldn't even wear it in contact with skin. Over time the sweat will activate the copper oxides in the stone and cause issues leading up to toxic shock. Edit and disclaimer: as said by Abhiwan, real malachite is toxic, however, @Patrick Adair Designs is using something called TruStone which is a body-safe resin made with minerals and dyes to emulate the look of real semi-precious stones (like malachite). You would be safe to wear the ring he makes here.

@12OunceProphet

2 жыл бұрын

Orcs mine this stuff :) They can be near it

@blazortheepic0384

2 жыл бұрын

@@12OunceProphet lmao

Never knew that true stone material existed. Kinda want some now.

@kill56erb5ee

2 жыл бұрын

I have never been able to find anyone selling a piece big enough to make anything with

@easttenncoinworks

2 жыл бұрын

Check out Maker Material Supply! They've got loads!

@lukek.5773

2 жыл бұрын

it's like 15 bucks for a blank

@lolix7002

2 жыл бұрын

@@easttenncoinworks I would like to thanks, I discovered a beautiful place

@easttenncoinworks

2 жыл бұрын

@@lolix7002 Of course! Fast shipping too👍🏼

Green and gold together is 🔥🔥

I had a malachite ring I got when I visited Israel in 1996 and I've loved it ever since. This is stunning and stunning work.

I need to get the dexterity this guy has. Really blew my mind when he put the gold foil into the groove without something so little as a twitch of the finger.

This was a really good return to form for the vids. Hope to see more of them.

Malachite is such a gorgeous material. You work it well ❤️

@GOLD_FEVER

Жыл бұрын

It's apparently man made fake malachite...

They look so beautiful.

That green bit of rock reminds me of Glass Armour in Skyrim

The rings and videos you make are always super High quality Keep it up

Ive never seen malachite in long flat layers like that. That looks lore like epoxy than malachite to me.

@zoerycroft4300

2 жыл бұрын

its malachite trustone, they grind up, and reconstitute real malachite, so it's technically real malachite, just processed with additives. think of it like the 23K gold of malachite

Those are beautiful!!

Its been a while since I last watched one of your videos. You have been such a big source of inspiration for me and Im really glad to see how your video have improved too. Keep it up1!

Absolutely incredible

Just bought me the pendant! Can’t wait to wear it!!

I kind of want to make a wooden pendant like that now....it'd look amazing with a dark mahogany and copper inlay or something like that.

I flippin' LOVE malachite!

Wow realy cool and sophisticate... 👏👏👏

So shiny and amazing

Fantastic!!

Wow amazing work

It’s gorgeous ❤️

Awesome 💯💯💯

this is probably the coolest ring ive ever seen

Beautiful

The true stone would look awesome as those fancy counters in kitchens, amazing work dude, this ring looks awesome

I just bought 2 gold burl rings, and I regret not getting a malachite ring so much! They are so beautiful!

Your rings are so beautiful! I wish I could afford them😬

@toryutz6914

2 жыл бұрын

Same.

@bryceandrews7194

2 жыл бұрын

Save some money

@toryutz6914

2 жыл бұрын

@@bryceandrews7194 it’s a work in progress

@yanaigumnoff924

2 жыл бұрын

how much do they cost 🤨

@mouhabsamy2335

2 жыл бұрын

@@yanaigumnoff924 it depends some are around 300$ and other goes all the way to 3000$

I would love to see a reverse version of this. A lightly more toned down version primarily in gold, but with a colorful inner ring.

Wow, Its a masterpice

Amazing Ring👍👍

Looks sick

Patrick my boy, come back! Always be in the videos! Also please make a video about how to take care of exotic rings, does and doesn't so our rings last a life time!

Man this ring in particular is astounding 💚🧡 I wish I could afford it😭

Wow such a beautiful blockkk of malachite

Beautiful work From Great Britain

Nice work

In the glass working industry, they have diamond drills that cut from both top & bottom at the same time, like a pair of scissors or a clamp closing. It stops the material blowing out around the edges at this did or, generally, the puck from breaking up or getting stuck in the bit. Might allow for thicker cuts too. I don't know if this would help or be a liability, but putting the gold in a freezer for a while (in a bag) would reduce it outside diameter, just enough to create an interference fit with the outer material which of course, if it was metal, could also be heated up to expand its internal diameter, thereby creating a tighter bond. That is how they get & hold valve seat rings into internal combustion engines. No idea how it would work with Trustone though. Your lathe's chuck or mandrel (?) seems to have a little runout. Nice work.

@ThreeTreeDog

Жыл бұрын

well even with the holesaw, it hsould have had a center drilled cut halfway flip then cut the other half, would have come out without the blowout, but he was turning it so it realy doesn't matter in this application.

@jonahwhale9047

Жыл бұрын

@@ThreeTreeDog Next to impossible to line up with just a holesaw, although perhaps if you used a small pilot drill to make a hole right through, to align it once you flip the material over, it might work.

@ThreeTreeDog

Жыл бұрын

@@jonahwhale9047 only hole saws I every used without a pilot just wind up being a low speed grinder lol.

@jonahwhale9047

Жыл бұрын

@@ThreeTreeDog Understood, but you'd have to drill it all the way thru first. I don't know what the name is for one of those double sided drills (but I have used one). I'd guess they only make sense if you're using it a lot, & working on big sheets. I think if I was using a holesaw one-sidedly, I'd want to use a smooth pilot for accuracy, & not the typical drill in an arbor.

Damn, that looks sick as hell...

I just love your work, i actually just made my first ring from your website last night, 'raw earth', i also added amazonite to it cuz i thought the teal would be cool with the purple and bronze colors of amethyst and copper. I remember watching my first video from you, the original 'obsidian' titanium superconductor ring. It's just so cool to watch

Really wanna experiment with true stone now :D Would really love to see a black granite/marble/stone-countertop material ring with a rose-gold inlay and a rose-gold inside :D I'm mentally picturing something akin to the Ember ring in terms of design (but obviously with rose gold rather than crushed stone) with the chamfered edges, or even the Frostbite ring with the hammered edges (that would look pretty badass :D of the two I'd love to see the hammered edges in the stone rather than chamfer xD)

looks great

@PatrickAdairDesigns

2 жыл бұрын

Thanks!

I love Malachite.

Have you made anything out of jade before? I wonder what a jade ring would be like

Wow cool😲😎✌️ interesting style 😎

This is one of the prettiest rings I've ever seen, this is the exact shade and blend of colors I enjoy. I sadly have no use for a ring though :( but perhaps one day I will and then it can be something as stunning as this. Really beautiful ring. I'm not one to wear pendants or anything as I have super sensitive skin.

@handryantan

2 жыл бұрын

Even gold?

@piplup10203854

2 жыл бұрын

@@handryantan I have avoided any jewelry since I had a severe allergic reaction so I don’t know honestly. It might be fine but I don’t know.

@Shock_Treatment

2 жыл бұрын

@@piplup10203854 Gold and platinum are hypoallergenic, so I doubt you'd have a reaction. If you're really that sensitive though, you should go with platinum. Gold is too soft to use in jewelry on its own, so its always mixed with copper to create the karats. Most platinum out there is 95% pure platinum because it's harder than gold. It's also heavier. Also, when gold is scratched, it loses a bit of material, but when platinum is scratched, the metal is just displaced. Neither metal can be dissolved in a single acid either. There's a few little facts.

@piplup10203854

2 жыл бұрын

@@Shock_Treatment Oh that is good to know! The last time I wore something was a tungsten ring and I had a severe allergic reaction to it that I couldn't wear it anymore. I'll look into Gold or Platinum. Thanks for letting me know, I'll go with the Platinum on the safe side.

I think it would be such a cool twist to do this in reverse have the gold showing and malachite on the inside 😮

Any updates on when the different tungsten rings will be available for purchase?

nice nice!!

Wow, I'm happy that I decided to click this video. I've been a subscriber for a long time and stopped for a while when u got a new voice over guy with this exact thought of coming back after some time when he has gotten the hang of it more sense I did like his voice. Obviously I am not sure if this is the same guy but I feel like he is and he has improved so much and I am so happy and proud. I love him doing the voice overs now. Good work, keep it up!

@theknight957

2 жыл бұрын

Same

I like the way you work 😊😍, greetings from Indonesia 🙏🙏

Hey your rings are... you know there is no word to describe how amazing they are. Do you charge different amounts for different materials.

I always love seeing these videos hit my sub box. I watch them with my mother; she does some small time jewelry work of her own, and the PAD team serves as a constant source of inspiration. She actually has a question about this build, too - what epoxy was used in the build? Was it the Astro Tech epoxy that y'all sell, or something different?

Really gorgeous!! Perfekt match, perfect work! Brilliant! But what's with the silver Necklace and Bail at the pendant, tho?

Nice

Nice cool new material can it be done from a sheet of synthetic ruby and a platinum liner

Bro your eyes is looking so beautiful ☺️ ✨

Это очень красиво, вы делаете невероятные вещи!

Nice 👍👍👍💯

ahhh that grip into the lathe though,

I grew up in a town that used to mine copper, so the high school’s yearbook is called Malachite.

Sem dúvida são peças maravilhosas, mas e o material esperdiçáveis também é grande. O que fazem com as sobras ou farpas?

Ahh almost classic Patrick Vid.

Muito bonito beautiful

I need a ring like this

Hey! May I ask what you are doing with the scrap malachite? I would be super interested in it! Thanks!

This ring looks deadly, but even more so if an offset channel with the gold flake to match the pendant as one might not see the gold as it’s worn 👌

What about a more gold ring with a highlight of Malachite? I'm picturing similar to racing stripe along the bonnet/roof of a car etc

Would look great on my warlock build

Hey have you worked with jade before? You should make a video with it.

Where do you purchase the malachite from? I would like to buy some, to use for inlays in my guitars that I build.

So nice! Can you do this with lapis?

Bought my lathe finally, so excited to start making rings!

i really want a ring like this but with white gold instead of regular gold, or maybe green oxidized titanium

When I get enough cash I'll be requesting from this guy to make me a real opal and meteorite rock ring Two of my favourite materials I'd say Both unique and gorgeous.

ware can I buy blocks of Malachite ? great looking ring

Good looking ring for sure. However I think rose gold would make the green pop more.

Love malachite, would it be feasible to create a malachite only ring?

Great orc forge

Isn't Malachite and water toxic? Is there a coating over it the finished pieces?

Would it be possible to tap the gold and true stone malachite, so that they would screw together?

Should have done the gold leaf band on the ring

oh hell yea, I'll take your entire stock

Is it possible to make the gold little bit bigger and then get it rly cold and fit it in?

Can make a ring with the fortify magicka enchantment?

I finally caved... On day 1 of the new year 😅 had to get a ring during that BOGO deal. It'll be something to symbolize my plans for a new year of growth and understanding of others.

Where can you buy this type of material but in different colors?

Nice got a sub. WHere could one get big slabs of trustone?

Is that gold inlay bits from the shaving off the gold ring in this video??

oh my god this looks so good it just- it just- wait... where are my socks?

Hey Brother, awesome video! What Lathe is that?

Dear friend, where I can find the stone a slab, because I'm watching to bye but is hard to find

Azurite version next? (blue variant of malachite, really gorgeous)

Очень красивый комплект украшений.

Would love to pick up one of your rings using the discount code as you have posted in the description, but it is coming up as not valid when I enter it on your site.

Me seeing the ring at the end: *grabing card out of pocket*

Where to get the gold ring blanks? Or is it casted?

Could you put a link in the description?

What do you do with the shavings?