In this video you will learn the steps of making a really nice one of a kind oversized or Fatline pen from a simple Slimline Pen Kit.
Жүктеу.....
Пікірлер: 107
@LarryDMitchell3 жыл бұрын
I love the addition of the acrylic band...a lot classier! Great video.
@myunclegoo Жыл бұрын
Made two pens using this technique tonight after watching this video. Loved it! Thanks for sharing.
@samuelsanchez618010 жыл бұрын
I loved the shine on it. Love how simple the steps are. I'm new at pen turning and sometimes it gets confusing with so many tecniques.
@g.b.84454 жыл бұрын
What a video, great project and editing made it brilliant, but the music took it to a different level again. Thanks for sharing.
@reforgedcriterion14715 жыл бұрын
That shine sold me, I am now putting together my own buffing system made out of bedsheets, old tshirts, and my flannel onesies!!!
@Trees2Pens11 жыл бұрын
Very cool looking pen and I have all the parts to try one including those little acrylic scrap blocks that I hate to toss out. Thanks for sharing.
@richardwassink24649 жыл бұрын
Great looking pen! Thanks for posting.
@bigcatc29718 жыл бұрын
I just tried this, works great, looks great. Plenty of room for the refill length, thx for the vid. Nice work.
@norm57856 ай бұрын
Thank you for sharing your awesome project with us.
@sofiadragon197910 жыл бұрын
I was debating on getting the beal buffing system, but after seeing it in action I'm getting it, thanks for that.
@Meeee19686 жыл бұрын
I often keep the extra pieces of acrylic and try to come up with other uses for them. Thanks for this great idea!
@ralphhross11 жыл бұрын
Great idea - wow ! One thing I did different is cut one wood-end at 45 degrees and same angle on one end of my plastic block, glued and double-clamped this part, drilled through as one piece, squared and turned as usual. Both styles look wonderful. Thanks for the idea.
@carr86911 жыл бұрын
Had to come back and watch this again. Thanks. Very nice.
@greggmcdonald54318 жыл бұрын
Great video and music choice was awesome! I will be using this technique as well. Thanks
@cezarlorenzini2 жыл бұрын
What a class, with a very nice teacher. I'm starting on the lathe and for me it was a very nice class. Thanks for sharing! from Brazil.
@Dreamcutter9 жыл бұрын
This is really excellent. I learned alot about fatline pen crafting techniques.
@GiseleGrenier4 жыл бұрын
Thank you for sharing your process and loved your choice of music as well.
@StephenOgle10 жыл бұрын
That is so cool. Simple and elegant. I like the innovation.
@fastgast57x11 жыл бұрын
Thanks Tim, I enjoyed the video and will definitely try one tomorrow, God Bless Rick
@davidkinchen703310 жыл бұрын
I like this method...I've mostly done Slimline pens, but I want to do fatline ones too! The music was great!
@Bamsjustbammer9 жыл бұрын
Great video, Great music and a Great looking pen. Brill
@mihailomili5 жыл бұрын
Amazing pen, thanks for the info. I look forward to attempting one for my father-in-law, who had a hand accident.
@elmerwong54322 жыл бұрын
Loved the pen. Thanks for sharing the process
@customcraft1110 жыл бұрын
Great job Tim.
@pearltroup42208 жыл бұрын
great video great song I live in Scotland love it well done
@acartledge889 жыл бұрын
Great video. Great music. Thanks. I want to get into pen making for a hobby what type of lathe do you use?
@mjhart7510 жыл бұрын
Thanks for sharing this, pretty cool stuff.
@scottyhighlander632111 жыл бұрын
very nice technique and a good way to use up the stuff up,err design oppertunities
@georgemccombs507010 жыл бұрын
Just caught your video and luv the idea.
@WattWood5 жыл бұрын
very nice , i've been turning some pens for arthritis sufferers being one myself , like your design very much .
@drobb42076 жыл бұрын
I buy my pen supplies from these folks and they are as good as gold!!!!!
@artmakersworlds7 жыл бұрын
gorgeous pen. I actually enjoyed the music too.
@Lanninglongarmmowing9 жыл бұрын
What a beautiful pen!!!
@jkell4211 жыл бұрын
nice work on the pen and the video! I like the music and captions.
@wood4nothing2845 жыл бұрын
Nice job on the pen it turned out really nice. Cheers Tim from Wood 4 Nothing
@IEraiderfan11 жыл бұрын
Great job and video please keep them coming thanks..
@dmiller77711 жыл бұрын
Great video. Very creative. Love the music.
@franciscoaloiola95349 жыл бұрын
Très bien! Un beau travail de création!
@barryparks70577 жыл бұрын
looks fabulous. well done
@waynejordy522711 жыл бұрын
Great Video. I will have to try this soon.
@alanhill76928 күн бұрын
I have a lot of acrylic offcuts. When I start making wood pens I will find a use for a lot of them. I also will make some cuff-links from acrylic offcuts. Waste not want not as my ol' Mum used to say.
@melechhaarayot92737 жыл бұрын
Can you still put a CA Finish on after you Beall Buffing system? ....It seems like I could buff it then put One CA coat instead of many coats of CA
@scottb160411 жыл бұрын
Love the video, I tried this after watching and it worked really well. Can someone please let me know what the song at the beginning is, I love it?!
@Doyledidit11 жыл бұрын
Great tutorial, just added three new songs to my iPod, thanks for all
@thomaschilders93372 жыл бұрын
Beautiful pen
@frehleycomet8 жыл бұрын
Does that tenon have to be a specific size?
@geoffgwyther72699 жыл бұрын
terrific result, ...but why did you dissemble the spindle and put a spacer in before sanding. Are you not concerned about rounding the edges of both the wood and the bling, and messing up the fit. Didn`t get that at all. Do like the polishing system. Going to make one of those.
@arthursmith31549 жыл бұрын
Do you use a longer tube? Or do you met the tube stick out?
@DeerAgeGuy11 жыл бұрын
Thanks so much!
@edhogue79436 жыл бұрын
Very nice project & I would to know who is the artist you are playing in the back ground love it.
@ramaroodle6 жыл бұрын
Nice technique with the skew.
@peterhkoller5 жыл бұрын
Love the video especially the music
@joseluisvaz16910 жыл бұрын
very, very nice thanks....OBRIGADO
@IBDaddyO11 жыл бұрын
great ideea on the scrap use
@dartman196511 жыл бұрын
Thanks for a great video.What is the song in the last segment?
@timv.49387 жыл бұрын
nice thanks I'll try it today😊
@nightcatbooks4 жыл бұрын
Does it get assembled the same way just without the center band?
@stevedittrich441112 күн бұрын
Now we know what to do with all those pen blank cut-offs, especially those expensive acrylics!!!
@kenevans99655 жыл бұрын
nice video, will try it next
@billsbasementworkshop19029 жыл бұрын
brilliant music. Nice pen as well.
@halfawhiteguy31452 жыл бұрын
what is the finished thickness of the pen? what did you turn the wall thickness down to?
@thomashanson66079 жыл бұрын
at 6:19 I see that the lower section is the same length as the glued up section. Since the bling took the place of wood on the brass tube what happened to the space for the center ring? The refill will be too long ! ! ! I guess it's just a little shorter, but I keep 7mm tubes to put the bling on. I suppose being an amateur gives me more time.
@reforgedcriterion1471
5 жыл бұрын
My thoughts exactly.. Except this changed nothing about the refill. He just took some of the headroom out of the top of the pen. You don't need all of that pen up there, we just make the two halves the same length for symmetry. Try making a shorty slimline sometime! Measure out exactly how much top tube you need and cut it short and give it a try. Honestly you could make a short fatty pen that looks like a mini gatsby if you wanted. In fact I'm starting a whole line of pens just like that starting with my own bullet pens made from scratch starting with 223 casings (they're so tiny!)
@kenzpenz11 жыл бұрын
You are killing me using that skew. I'm still trying to get a handle on it, pardon the pun. But like you say practice makes perfect. As all your other videos, great and thanks Ken Bartlett Marina CA
@petermitchell108 жыл бұрын
What a beautiful pen great music a very enjoyable video. Can you tell me how to pick some music that doesn't break the copyright laws that i can play on my videos please ?
@bentonwebb39828 жыл бұрын
Please tell us the musical group and album playing during this vodeo. Thanks. Really nice pen project. Paul
@conradhertzler5369
7 жыл бұрын
Sounds like Mumford and Sons starting from 4:30
@1Igster1
6 жыл бұрын
The music credits are given in the description window up top... bottom line. Mumford & Sons.
@dennynebgen22835 жыл бұрын
What is the first song on the video and by whom/ Nice video on the pen, by the way.
@glennclarke97873 ай бұрын
Really enjoyed your vlog, thank you ( ps.been more interesting if you're talked us through the vlog 😀
@frankdellaria2189 жыл бұрын
Just watched your video. Copied your method, made a great looking pen. Yellow osage and walnut. Thanks
@conradhertzler53697 жыл бұрын
Great-looking pen! Unfortunately, I don't have one of those snazzy buffing machines!
@1Igster1
6 жыл бұрын
Me neither but I did get a buffing wheel/disc system you can use on your drill, just put a drill chuck into your headstock and have at it.
@dwightl5863
6 жыл бұрын
In my experience I have found that if you sand to 12,000 grit with the micro-mesh pads and then do a final polish with a plastic polish (Hut Ultra-Gloss plastic polish) you will be hard pressed to see the difference.
@johnowens57513 жыл бұрын
Adding the acrylic piece 👍
@nathandhill10 жыл бұрын
Thank you Bill, I did watch the video to the end but the credits went so fast I didn't see it. I've searched KZread, the web, and Amazon but haven't been able to find the music to purchase. If anyone knows where it can be purchased please post it.
@timmysixgun
4 жыл бұрын
Nate Hill it’s “Awake my soul” by Mumford and sons.
@fsbell16 жыл бұрын
No coats of CA for the wood?
@StephensPenTurnings3 жыл бұрын
You could have saved a lot of work by just gluing the acrylic to the burl 1st. Then cut to length ,drill and glue the tube/barrel trim. Nice outcome though.
@JayReidy11 жыл бұрын
Arthritis, heck! I love the feel of a fat pen or pencil. It just feels better! Peace, j
@StephenOgle10 жыл бұрын
I love this pen, it is so cool. I just finished one for myself with a homemade acrylic blank and it really turned out nice. Thanks WoodNWhimsies for your innovation.
@melkoebes8 жыл бұрын
seems a lot of turners have a love affair with the skew chisel , still like your innovative design
@olelaustsen86575 жыл бұрын
Thanks for sharing your technics, personally I would prefer a video without the music and with a commentary instead, it would make the video much more personal and authentic. At least that is my opinion. Thanks. Have a great day!
@ThunderstruckElectronix5 жыл бұрын
Why do you have to square the blanks? Can't you make a pen without that kind of drill?
@colinbromley6219 Жыл бұрын
whos that singing great pen by the way
@earlglover60912 жыл бұрын
No audio
@nathandhill10 жыл бұрын
I'm not the only one who would like to know the artist and song. I used Shazam & Sound Hound and they couldn't ID it.
@ChoctawFlute
10 жыл бұрын
Halito Amkana! Illvpvt hvmma taloa Hello friend this is native music. at 4:35 it sounds like Randy Wood. Randy Wood is a Native American singer, artist and story teller. Yakokee! Chi pisa lachike!
@melkoebes8 жыл бұрын
baking soda as an activator will do
@rbaroncpd10 жыл бұрын
My question is this; When you glued the tube in the bluish/green blank it looked wayyyy bigger then the one you turned with the rest of the pen. When did you cut it down?
@DaddyHaxTV
9 жыл бұрын
He didn't glue it into the acrylic piece. It was just held in place to keep the barrel trimmer square.
@JesusvonNazaret11 жыл бұрын
had to mute the song when he started howling
@oo0Spyder0oo8 жыл бұрын
the blank you turned and trimmed away the wood to expose the barrel, why not just shorten the blank on the mitre saw or bandsaw then when you turn it, it will be the right length? No need to remove the excess with the skew.
@reforgedcriterion1471
5 жыл бұрын
Why do anything? What if I think your way is backwards?
@asahoura27986 жыл бұрын
A really nice video, sans the soundtrack. I fart would not have been out of place anywhere.
@billrobinson8939 Жыл бұрын
I sure wish this narrated instead of subtitles and music. I missed the finish, even with double watching. Now I gave watch again. No multi-tasking allowed
@bmw1200gu2 жыл бұрын
Procedimento errato in quanto se il taglio non è perfettamente a 90° larasatura verra obliquò, quindi la rasatura dovrà essere eseguita dopo l'incoraggio.
@geoffgwyther72699 жыл бұрын
Don`t see the point in spraying the activator on the joint after you have pressed them together . Surely better to spray the activator on the bling , THEN,, bring them together
@dclinks11 жыл бұрын
you didnt show the pen parts installed..
@aprildegele1510 Жыл бұрын
The video was great ... but the music ...!
@bikerdad4611 жыл бұрын
should have talked and left the music off. very nice pen though
@coleyounger40603 жыл бұрын
talk and no music
@paintilludrop Жыл бұрын
Lose the music.
@sk13ppy3 жыл бұрын
Oh crap! I much prefer videos where the presenter actually talks instead of music and text. You ruined your own video! It's impossible to read and watch what you're doing at the same time. 👎👎👎👎👎👎
@jjgengland14862 жыл бұрын
Lost your voice!
@cezarlorenzini2 жыл бұрын
What a class, with a very nice teacher. I'm starting on the lathe and for me it was a very nice class. Thanks for sharing! from Brazil.
Пікірлер: 107
I love the addition of the acrylic band...a lot classier! Great video.
Made two pens using this technique tonight after watching this video. Loved it! Thanks for sharing.
I loved the shine on it. Love how simple the steps are. I'm new at pen turning and sometimes it gets confusing with so many tecniques.
What a video, great project and editing made it brilliant, but the music took it to a different level again. Thanks for sharing.
That shine sold me, I am now putting together my own buffing system made out of bedsheets, old tshirts, and my flannel onesies!!!
Very cool looking pen and I have all the parts to try one including those little acrylic scrap blocks that I hate to toss out. Thanks for sharing.
Great looking pen! Thanks for posting.
I just tried this, works great, looks great. Plenty of room for the refill length, thx for the vid. Nice work.
Thank you for sharing your awesome project with us.
I was debating on getting the beal buffing system, but after seeing it in action I'm getting it, thanks for that.
I often keep the extra pieces of acrylic and try to come up with other uses for them. Thanks for this great idea!
Great idea - wow ! One thing I did different is cut one wood-end at 45 degrees and same angle on one end of my plastic block, glued and double-clamped this part, drilled through as one piece, squared and turned as usual. Both styles look wonderful. Thanks for the idea.
Had to come back and watch this again. Thanks. Very nice.
Great video and music choice was awesome! I will be using this technique as well. Thanks
What a class, with a very nice teacher. I'm starting on the lathe and for me it was a very nice class. Thanks for sharing! from Brazil.
This is really excellent. I learned alot about fatline pen crafting techniques.
Thank you for sharing your process and loved your choice of music as well.
That is so cool. Simple and elegant. I like the innovation.
Thanks Tim, I enjoyed the video and will definitely try one tomorrow, God Bless Rick
I like this method...I've mostly done Slimline pens, but I want to do fatline ones too! The music was great!
Great video, Great music and a Great looking pen. Brill
Amazing pen, thanks for the info. I look forward to attempting one for my father-in-law, who had a hand accident.
Loved the pen. Thanks for sharing the process
Great job Tim.
great video great song I live in Scotland love it well done
Great video. Great music. Thanks. I want to get into pen making for a hobby what type of lathe do you use?
Thanks for sharing this, pretty cool stuff.
very nice technique and a good way to use up the stuff up,err design oppertunities
Just caught your video and luv the idea.
very nice , i've been turning some pens for arthritis sufferers being one myself , like your design very much .
I buy my pen supplies from these folks and they are as good as gold!!!!!
gorgeous pen. I actually enjoyed the music too.
What a beautiful pen!!!
nice work on the pen and the video! I like the music and captions.
Nice job on the pen it turned out really nice. Cheers Tim from Wood 4 Nothing
Great job and video please keep them coming thanks..
Great video. Very creative. Love the music.
Très bien! Un beau travail de création!
looks fabulous. well done
Great Video. I will have to try this soon.
I have a lot of acrylic offcuts. When I start making wood pens I will find a use for a lot of them. I also will make some cuff-links from acrylic offcuts. Waste not want not as my ol' Mum used to say.
Can you still put a CA Finish on after you Beall Buffing system? ....It seems like I could buff it then put One CA coat instead of many coats of CA
Love the video, I tried this after watching and it worked really well. Can someone please let me know what the song at the beginning is, I love it?!
Great tutorial, just added three new songs to my iPod, thanks for all
Beautiful pen
Does that tenon have to be a specific size?
terrific result, ...but why did you dissemble the spindle and put a spacer in before sanding. Are you not concerned about rounding the edges of both the wood and the bling, and messing up the fit. Didn`t get that at all. Do like the polishing system. Going to make one of those.
Do you use a longer tube? Or do you met the tube stick out?
Thanks so much!
Very nice project & I would to know who is the artist you are playing in the back ground love it.
Nice technique with the skew.
Love the video especially the music
very, very nice thanks....OBRIGADO
great ideea on the scrap use
Thanks for a great video.What is the song in the last segment?
nice thanks I'll try it today😊
Does it get assembled the same way just without the center band?
Now we know what to do with all those pen blank cut-offs, especially those expensive acrylics!!!
nice video, will try it next
brilliant music. Nice pen as well.
what is the finished thickness of the pen? what did you turn the wall thickness down to?
at 6:19 I see that the lower section is the same length as the glued up section. Since the bling took the place of wood on the brass tube what happened to the space for the center ring? The refill will be too long ! ! ! I guess it's just a little shorter, but I keep 7mm tubes to put the bling on. I suppose being an amateur gives me more time.
@reforgedcriterion1471
5 жыл бұрын
My thoughts exactly.. Except this changed nothing about the refill. He just took some of the headroom out of the top of the pen. You don't need all of that pen up there, we just make the two halves the same length for symmetry. Try making a shorty slimline sometime! Measure out exactly how much top tube you need and cut it short and give it a try. Honestly you could make a short fatty pen that looks like a mini gatsby if you wanted. In fact I'm starting a whole line of pens just like that starting with my own bullet pens made from scratch starting with 223 casings (they're so tiny!)
You are killing me using that skew. I'm still trying to get a handle on it, pardon the pun. But like you say practice makes perfect. As all your other videos, great and thanks Ken Bartlett Marina CA
What a beautiful pen great music a very enjoyable video. Can you tell me how to pick some music that doesn't break the copyright laws that i can play on my videos please ?
Please tell us the musical group and album playing during this vodeo. Thanks. Really nice pen project. Paul
@conradhertzler5369
7 жыл бұрын
Sounds like Mumford and Sons starting from 4:30
@1Igster1
6 жыл бұрын
The music credits are given in the description window up top... bottom line. Mumford & Sons.
What is the first song on the video and by whom/ Nice video on the pen, by the way.
Really enjoyed your vlog, thank you ( ps.been more interesting if you're talked us through the vlog 😀
Just watched your video. Copied your method, made a great looking pen. Yellow osage and walnut. Thanks
Great-looking pen! Unfortunately, I don't have one of those snazzy buffing machines!
@1Igster1
6 жыл бұрын
Me neither but I did get a buffing wheel/disc system you can use on your drill, just put a drill chuck into your headstock and have at it.
@dwightl5863
6 жыл бұрын
In my experience I have found that if you sand to 12,000 grit with the micro-mesh pads and then do a final polish with a plastic polish (Hut Ultra-Gloss plastic polish) you will be hard pressed to see the difference.
Adding the acrylic piece 👍
Thank you Bill, I did watch the video to the end but the credits went so fast I didn't see it. I've searched KZread, the web, and Amazon but haven't been able to find the music to purchase. If anyone knows where it can be purchased please post it.
@timmysixgun
4 жыл бұрын
Nate Hill it’s “Awake my soul” by Mumford and sons.
No coats of CA for the wood?
You could have saved a lot of work by just gluing the acrylic to the burl 1st. Then cut to length ,drill and glue the tube/barrel trim. Nice outcome though.
Arthritis, heck! I love the feel of a fat pen or pencil. It just feels better! Peace, j
I love this pen, it is so cool. I just finished one for myself with a homemade acrylic blank and it really turned out nice. Thanks WoodNWhimsies for your innovation.
seems a lot of turners have a love affair with the skew chisel , still like your innovative design
Thanks for sharing your technics, personally I would prefer a video without the music and with a commentary instead, it would make the video much more personal and authentic. At least that is my opinion. Thanks. Have a great day!
Why do you have to square the blanks? Can't you make a pen without that kind of drill?
whos that singing great pen by the way
No audio
I'm not the only one who would like to know the artist and song. I used Shazam & Sound Hound and they couldn't ID it.
@ChoctawFlute
10 жыл бұрын
Halito Amkana! Illvpvt hvmma taloa Hello friend this is native music. at 4:35 it sounds like Randy Wood. Randy Wood is a Native American singer, artist and story teller. Yakokee! Chi pisa lachike!
baking soda as an activator will do
My question is this; When you glued the tube in the bluish/green blank it looked wayyyy bigger then the one you turned with the rest of the pen. When did you cut it down?
@DaddyHaxTV
9 жыл бұрын
He didn't glue it into the acrylic piece. It was just held in place to keep the barrel trimmer square.
had to mute the song when he started howling
the blank you turned and trimmed away the wood to expose the barrel, why not just shorten the blank on the mitre saw or bandsaw then when you turn it, it will be the right length? No need to remove the excess with the skew.
@reforgedcriterion1471
5 жыл бұрын
Why do anything? What if I think your way is backwards?
A really nice video, sans the soundtrack. I fart would not have been out of place anywhere.
I sure wish this narrated instead of subtitles and music. I missed the finish, even with double watching. Now I gave watch again. No multi-tasking allowed
Procedimento errato in quanto se il taglio non è perfettamente a 90° larasatura verra obliquò, quindi la rasatura dovrà essere eseguita dopo l'incoraggio.
Don`t see the point in spraying the activator on the joint after you have pressed them together . Surely better to spray the activator on the bling , THEN,, bring them together
you didnt show the pen parts installed..
The video was great ... but the music ...!
should have talked and left the music off. very nice pen though
talk and no music
Lose the music.
Oh crap! I much prefer videos where the presenter actually talks instead of music and text. You ruined your own video! It's impossible to read and watch what you're doing at the same time. 👎👎👎👎👎👎
Lost your voice!
What a class, with a very nice teacher. I'm starting on the lathe and for me it was a very nice class. Thanks for sharing! from Brazil.