The first 100 people to use code EXTREME at the link below will get 60% off of Incogni: incogni.com/extreme

@FarmerFpv

8 ай бұрын

Make It Extreme super powerful pneumatic Crossbow next? Big enough to hunt rhinos and Elephants? Maybe hunt an occasional Mother-in-law, too? 😂😂

@antosujarwo5015

8 ай бұрын

​@@FarmerFpvngaco😅😅😅

@Watchyn_Yarwood

8 ай бұрын

Incogni will not give you the discounted cost until you create an account! They have a published rate but what is the discounted rate? Sound like they want your information to do with as they please regardless if you sign up. If it sounds too good to be true, it probably is. No thanks!

@KeithOlson

8 ай бұрын

That's a pretty sweet build! You should try 'self-fusing silicone tape'. It was invented by the US Air Force to protect the wiring in their fighter planes. You can look up MIL Spec MIL-I-46852 / A-A-59163 for what makes it such an incredible addition to your tool box. Personally, I've used it for everything from simply wrapping wires to making custom tool grips to sealing a city-pressure water line until I could get it fixed. (It's fairly soft, so wrapping it with electrical/duct/etc. tape where it might get abraded is a good idea.)

@Qasimmukhtar-tn8lz

5 ай бұрын

Support from pakistan ❤ excellent work

I built a very similar tool a couple years back that attaches to my cordless drill. It holds 2 rolls 180° from each other. Makes cool candy cane patterns with different color tape!

@jameshatton4405

6 ай бұрын

Must be great for re-wrapping sporting equipment 👍 You could make custom team coloured designed for baseball, hockey, cricket, la Crosse etc etc

Could we stop a second to appreciate how much it takes to make videos like this? The knowledge and experience in mechanics, the investment in absurdly expensive equipment, the sheer ideas and willpower to execute them consistently to keep a KZread channel going for so long, editing, drawing, assembly, design, testing, problem-solving, I can't even imagine everything else that is required in a channel like this. Holy crap man! I hope KZread treats you right because you deserve it! Congratulations!

Hahaha. The reenactment of the frustrations that go along with manually taping cords together was definitely a great hook!

The best kind of engineering... spending several days making a tool that saves you a few minutes on a job... and you do that job maybe a half dozen times a year! Love it (and yes, I'm guilty of this too)!!! We do it because we can!

Great job as always. Clever design with a lot of utility.

Angle the tape roll holder at 20-30° so it is smother when you're wrapping, nice idea.

As a car enthusiasts and electrician, Damn I absolutely love this, I take my hat off to you brother, I would so Buy this if you offered to make & sell one. Thank you for sharing your talents with us❤

Great build. Pretty cool tool! Thanks for sharing.

At first I thought it was overkill for wrapping a bundle of wires then as I watched and thought how funny how many other uses this has that never occured to me, a deceptively brilliant build👍.

Very clever how you designed and made quite a complex mechanism around a second hand motor

Super clever tool as usual, great job!!!!

Overall, this is a highly informative and enjoyable video for anyone interested in engineering. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍

I've been watching these guy's content for the last 6 years, and it keeps getting better.

@MakeitExtreme

8 ай бұрын

Thank you for your good words and support! 👍🏻

Beautifully overengineered tool, love it so much!

That must be the coolest tool / toy I ever seen! I hate wrapping wires and cables! Good job guys! Very awesome!

Nice work, and an excellent tool as-is! Future upgrades to consider (or for others looking to implement something similar): 1. A microswitch that continues to run the motor after the trigger is released until the opening aligns. 2. Make the angle of the tape roll adjustable. Perhaps a simple swivel and spring might make the tape angle automatically as pressure is applied so the speed someone moves along the bundle determines the tape angle. 3. Battery pack mount - use a standard tool battery rather than wires/cables 4. Adjustable bundle centering with springs - slide the bundle in and two or more U or V shaped shutters center it. A locking knob may be used to keep the opening stable, or strong springs. 5. Add a sensor to detect movement along the bundle (a rubber wheel on the shutter or bar would be enough) and set the motor speed according to that so a specific overlap or wraps/distance can be maintained regardless of user speed.

@gfixler

8 ай бұрын

I was thinking a pair of gripper rollers on the leading side that open and spring shut to grab onto the cable or pipe, and some little knobs for entering feed rate per revolution (set it to half tape width for half overlap), so it pulls a cable through, or walks itself along a pipe, like a self-propelled lawnmower.

@smexxxdawn9410

3 ай бұрын

А еще зажигалку, сигаретки, пасьянс и журнальчик под пивко?

Great job. Mindblowing construction ! Greetings and best regards !😊

This has been around for a long time. Stator bar tape machines are like this. Fun machines to build and maintain. 😉

I'm glad you are back to building things again.

Good work and video as always. We shared this video on our homemade tools forum this week 😎

Love it!! Great idea and video. Thank you.

GREAT built. This is the kind of tool that you don't really need but once you have it you don't want to live without..

It’s nice seeing the combination of Wazer and plasma cutter. They both have their strengths.

A benchtop mount with a foot pedal would be awesome!

Awesome project!!! Love it

Last seconds of video - that is a REAL cool Idea!

that is awesome, you could add a second roll of tape on the opposite side and make it twice as fast or to combine colors for decoration

@smexxxdawn9410

3 ай бұрын

Потом если что то надо, то не получится размотать обратно. Только резать.

Senelerden beri takip ederim seni elindeki imkanlar, makinelerin vs o kadar temiz bir işçilikle çalışıyorsun ki seni kendime benzetiyorum ben yapsam anca bu kadar güzel olurdu. Sorunlara çok güzel inovatif çözümler üretiyorsun tek farkımız sendeki imkanlar bende yok, güzel içeriklerde görüşmek üzere...

Excelente trabajo, felicidades por esa gran versatilidad que tienes para trabajar hermano, un saludo desde México.eres un campeón. Gracias por compartir

Friggin sick unit! Would use almost daily!

Cool idea, but I would have added a support piece across of the tape roller that spins with it and supports the cable, so you don't have to hold it as tight. You already did something close to that with the extra bar that can be seen in some shots, but it's only really effective when the tape roller is in a specific position.

This channel is simply "Quality over Quantity" 🔥❤

amazing, it seems that the tool has good torque too.

Simple, but wicked cool!

You make the coolest stuff bud. This can be handy. The end was funny too lol

Your ideas and technical skills are the best.❤❤

The ending was hilarious 😂😂😂😂

On ne s’en lasse pas! ce mec est un génie de la mécanique et question réalisation n’en parlons même pas. Bref: époustouflant

I would like to see a Make It Extreme Crossbow! One that is self-loading, or one that is powerful enough to take down an Elephant. That would be sick!

So I e been watching for a while now and I think I finally have a valid question. Where do you get all these builds from? Do you look at old patients, did you do schooling to be an engineer? Some of this I can reason through and see but a lot of this I'm just like, how did he do the figuring to build this.

Awesome little build there guys 👏👏👏. Love it 👉👉👉. 😎

That's quite the machine. Thanks from Colorado.

I respect you very much. 100 mechanical engineers = 1 make it extreme

nicely done 👍👍, 2 things i would have added, 1) tape lock, like grinder disc lock, 2) dc motor speed controller and use higher voltage, would help adjusting speed, now speed seems slow.

Gotta paint it the customary Green and Black!! 🟩⬛ 🥰🤩

Congratulations!!!! Wonderful project!!!!👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

Can it also rotate in the opposite direction? Could add another roll of duct tape for faster wrapping if the engine revs can't be accelerated.

Loved the gear wheel and spur gear you got from one cutting. If you want to block the spam and interruptions on your phone take a 16 penny iron nail and nail your phone into a stump out in the yard

damn this thing is so undeniably good and usefull .. . i need to design one for my 3d printer..

should have a variable speed trigger so you can go faster or slower if you want.

Good job mister beautifully done

(Next door neighbor to Extreme Garage) "Honey? Why are my car keys taped to coat rack?" 🤣😂

love the combat based usage at the end

Fantastic. Well done sir!

So much fun to use, You are going to need a tape sponsor now. 😂

I have an apprentice. She's cheaper (she works for ice cream & being allowed to stay up late when Mom's teaching an evening class). Also, she makes coffee (if threatened with a big enough stick). Only downside is her mother wants her to keep her nails clean. As Shop Foreman (AKA Dad) I find her a reasonable employee who can be relied upon to wrap tape around things.

Muy buen trabajo, para el aire acondicionado me vendría genial

Anyone who thinks this is too slow or an overkill has never wrapped cables for hours :D Great build!

Perfect work

Congratulations on another well sussed out device!

That’s pretty cool. Maybe you step up to variable speed motor much like a cordless drill just for speed during long wraps.

Is your tail stock on your lathe centered?

I would love to work in such an enterprise, how I love implementing innovative technology ideas!❤

Nobody makes it extreme like Make It Extreme.

Just here for the music! 😂❤ No, really amazong video!!

Its true, machine and man work,nice video

I continue to be impressed with your ability to solve diverse problems. Now if you can just get it to change tape rolls automatically ... 😜

Парни- молодцы! Давно смотрю ваш канал, всегда восхищаюсь. 👍🏻

Parabéns, muito top!!!🇧🇷🇧🇷🇧🇷

Это действительно таким должен быть DIY контент. Но его очень мало. Круто. Спасибо за полчаса)

Brilliant!!!

Those tiny custom machine precision welded chain things ~ 10:30 - 11:00 looks like a quality version of the cheep plastic part on my coffee grinder that's sloppily held together with epoxy... Wish I had your tools man... AND your skills, cuz my glue vs. your precision hand welding no contest. .. & or anything mass produced was made right AND affordable nowadays..

you should totally sell the design for this to a power tool company. Electrician's around the world would love to have one of those bad boys in their armory of power tools.

*Awesome thanks for sharing* 😊

@MakeitExtreme

8 ай бұрын

Thanks for watching!

Company called Kabatec is making industrial grade taping machines. Those teeths will damage either your hand or your wires. Good protype but needs improvement.

That unbalanced gear is doing my head in 🤣🤣 but fair play to creating a solution to a problem we've all had!

!!! SUPER GOOD !!!

More emotional than a movie! Crazy!

Great Build

great a job... try to make a plasma cut pantograph copier.. i hope you can make it.❤

ㅋㅋㅋㅋㅋ 마지막 장면에 빵 터졌네요 :)

Needs a laser line to show where the tape will go. Great work.

Отличная работа!

I think it’s better if the electrical tape is stretched a bit when being applied, so I’d add a friction source to the tape spool.

Add a felt wiper [mcmaster carr] against the ring and have it wipe some mineral oil on it to extent the life of the metal on metal parts OR make the six bearings out of nylon for metal on Nylon.

This would be great for wrapping adhesive less self sticking silicone tape (used often in marine appications).

Man, you're the best! Such a good idea and such a skillful realization! Great job, Thank you!

This is awesome.

wow, look something you can easily do by hand and probably faster. however still amazing for a video.

How did we ever build a civilisation without this marvel.....

The ancient Egyptians would have loved one of those. Could you add a wheel that progresses the wrap along at a set pace?

Need some small improvements, but it's already an excellent job! 👍🏻👌🏻

Great tool. Is it for sale?

Fantastic - $2000 well spent (Labour, design and material) all for two cables

Have you attempted to market this to Boeing, Tesla, Ford, any companies like that? For wire looms this would be such a time saver

Loving the doskpop!

You should try to get a sponsorship from a company that makes a hand cleaner for mechanics. I can only imagine how much you go through! ;)

That is so darned cool!!!

Good job bro!