I 'm pinning this comment just to address the use of a fan with blades. I didn't name this style of fan 'Bladeless" but it seems very obvious to me why it would be called that, any issue with that seems trivial to me (some comments have even included vulgarities over this point, you just need to chill out a little). If you bought a Dyson fan you would never know it had blades inside so would it matter if it did when you found out? I don't think so, it's still the same fan with no visible blades. Also how else would anyone think these fans move air, Magic? :)

@megagadgetmad2

4 жыл бұрын

Pask Makes if you look at the fans they use impellers which is basically a bladed fan

@gonzostwin1

4 жыл бұрын

Just like apple users......they get angry when you point out the obvious

@davidwilkie9551

4 жыл бұрын

For "giving it a go" it's a total success. I wondered if the gizzards of a small vacuum cleaner, used as a higher than fan pressure, blower, to get around the flow restrictions..? It doesn't need it unless you like to extend the challenge a bit.

@troyclayton

4 жыл бұрын

I watched for over 5 minutes because of the click bait title, then I stopped. Truth in advertising is best.

@ralfhedstrom

4 жыл бұрын

@@troyclayton Gosh! You got to widen your perspectives here. It's bladeless where we usually figure there should be blades.

That jig for cutting the air intake slots in brilliant.

@jayanpari

4 жыл бұрын

I was mind blown seeing it

@ericanderson4973

4 жыл бұрын

I learned something new with this concept. Thank you for the brilliant idea

@rickb06

4 жыл бұрын

Absolutely, I found a schematic for something quite similar and will be making one for myself SOON! Absolutely fantastic!

@petercarioscia9189

4 жыл бұрын

I finally got to that part of the video and hit damn you're right, that was ingenious. And now we have that trick in our back pockets. Amazing

@PrincipalScratcher1

4 жыл бұрын

@Hanaldai Munamana 20:11

Next up on the "Scrapwood Challenge," a cold fusion reactor.

@terencekreft482

4 жыл бұрын

In place of the fan power supply.

@beirtipol

4 жыл бұрын

It's scrap, it's crap, it's firewood, but some of the wood contains high levels of deuterium

@gonzostwin1

4 жыл бұрын

I'd prefer to see him make a Yugo outta wood.....1 to 1 replica of course

@unoefxz

4 жыл бұрын

no shit eh? how else can you top this? best lathe project these eyes ever spied..

@asj3419

4 жыл бұрын

You won't manage cold fusion, but you can make a regular fusion reactor surprisingly easily. The first fusion reactors where called fusors and could be made with a high voltage power supply and a vacuum pump. It won't do much other than eat power and spew out neutrons (if you put in _alot_ of power), but atleast the glow it gives off looks nice.

Beyond amazing. So satisfying to watch an expert at his trade. Loved the jigs and problem solving. The final result is beautiful, That's a $600 fan.

@DoubleNDonn

2 жыл бұрын

probably works better than a Dyson as well.

@kobegaming5614

2 жыл бұрын

More like 800

@ShortwickCreations

2 жыл бұрын

You're paying for the name with Dyson

Watching this made me so happy for some reason. It's made out of scraps and instead of hiding it, the patchwork-kind pattern is a highlight. The entire process of shaping it was so satisfying to watch. The design itself is quite elegant. The horizontal holes look great and you didn't hide the mistake, instead explained it and decided on a way to fix it. The way you made the holes was brilliant. All in all just such a wholesome video! How on earth did it get almost 6k dislikes is beyond me, luckily the algorithm still picked this up and suggested the video to me ♥

@TheJunnutin

2 жыл бұрын

The algo doesn't differentiate between up or down votes. "Engadgement" is what matters..

Can we just appreciate that this guy didn't put any ads. Y'all this was made 7 months ago, I don't know what happend

@syv6173

4 жыл бұрын

he missed out on a lot of ad revenue that would have been a slight inconvenience to us, and a well deserved major pay check to him

@jeschinstad

4 жыл бұрын

@@syv6173: You could always support his patreon. I much prefer giving a dollar a month for great content than all those ads.

@Tritium_

4 жыл бұрын

Ooga booga

@exoticl0197

4 жыл бұрын

Ooga booga

@floresj

4 жыл бұрын

I pay for KZread premium so I haven't seen ads in months

This from a 40-year career woodcrafter....this is fabulous work, meticulous attention to detail with a broad skillset I envy. Entertaining too; I'm so impressed.

@AgentMazgunn

4 жыл бұрын

@@Aykalia dont bother with Angry Pent, the name tells u all. This is awesome work.

@GauntLife

4 жыл бұрын

@Angry Pent Your parents are 100% failures as are you. Good luck out there, pal.

@Tauchio

4 жыл бұрын

@@Aykalia Why would he spend 700€ on a fan just to take it apart because someone in a youtube comment section didn't understand that the title says bladeless fan and he proceeds to use blades..

@Aykalia

4 жыл бұрын

@@Tauchio because idiots only learn doing stupid things

@austen2751

4 жыл бұрын

@@Tauchio It was a sarcastic way of telling him those fans have blades , genius.

I must admit, when I saw the end result, I was blown away by the quality of your work. I wasn't a fan before, but I am now. It really sucks that people got so up in arms about-- alright I'm done with the fan/air puns. Seriously though, excellent work.

@seanderfuss6865

2 жыл бұрын

the wood wasn't either

@crustycurmudgeon2182

2 жыл бұрын

@@seanderfuss6865 Two drums and a cymbal.

I have great admiration for your slot cutting jig, and the ingenuity of using pieces of plywood for successive _equal_ height gauges. Your patience with the segments deserves a medal!

High school engineering teacher here - wicked excited to show this to my students while they are home and bored. Thanks!!!

@vap1777

4 жыл бұрын

Jesse F dude I’m in middle school and I’m totally going to engineering in high if this is what you’re doing lmao.

@chillapollo8188

4 жыл бұрын

Sign me up!!

@MagklJellyBeanPastelLucidDream

4 жыл бұрын

@@vap1777 well, depends. See if you can choose a class like that. Best of luck dude!

@bobsagget823

4 жыл бұрын

no such thing as "engineering" in high school you are a loser and your school is probably worst in the state

@Cenentury0941

4 жыл бұрын

@@bobsagget823 Learn to use punctuations.

28 minutes of my life watching this, and it was 28 exceedingly well-spent minutes.

@jessharriman3254

4 жыл бұрын

I watched this at 2x speed and only spent 14 mins

@mummyjohn

4 жыл бұрын

Amen

@oliviatresenberg338

3 жыл бұрын

Agreed!

@hafeexius

3 жыл бұрын

I didn't realise it was 28 minutes

@boarbot7829

3 жыл бұрын

Jess Harriman yes, it’s not only me who watches everything on 2 times speed

Do I care if a "bladeless" fan uses hidden fan blades or impeller blades? No. All I need and want from a fan is the ability to push a lot of air preferably at me. I clicked on this video because I subscribe to the maker's channel and the picture shown was a thing of beauty. After viewing the entire video from beginning to end I am left thinking four things: 1. This build most definitely did not disappoint. 2. The maker truly has the patience and determination required for the completion of such a project, especially with all the fiddly bits involved. 3. The finished product is almost too pretty to be utilitarian. 4. That workshop must smell amazing when the wood is being turned on the lathe.

I love how humble this guy is when he’s a literal mastermind in my eyes

That router jig for cutting slots on round objects, why haven't I ever thought of that? Your videos are full of good ideas, cheers.

@allgreatfictions

4 жыл бұрын

Need a tool? Make a tool.

@aserta

4 жыл бұрын

Figure that you're using your router at, roughly 10 20 % of it can do. Some of the jigs i've seen in the chair in industry alone, can blow your mind. One router, and you can make an entire chair, using each specific jig, no sanding, no double fitting, probably 10 13 different bits. Routers are incredibly versatile AND pliable to any task you give them if you think outside the box. Add in variable speed control and you're going places. :))

@schm4704

4 жыл бұрын

Matthias Wandel levels of ingeniousness :-).

@raybrown1779

4 жыл бұрын

@@schm4704 Better than Matthias, Pask incorporates style,and art

@jonwnter688

4 жыл бұрын

Ya, that was genius... but an hour to build? Come on, it took longer than that.

give this man enough time and he will make a wooden jet engine

I've been really enjoying your videos and I especially love how you explain why you chose to do things the way you did (including "it was easier" or "i didn't feel like making a jig") as well as how you point out your mistakes and what you did to fix them. Nobody's perfect and DONE is better than perfect anyway. Your ingenuity and adaptability is inspiring.

Don’t care what negative comments this received, they simply missed the point that you are one heck of a craftsman.

@ericarmstrong1411

4 жыл бұрын

that is what i was thinking

I have no need what so ever for a wooden blade-less fan . With that being said, I would buy this in a skinny second without question, hesitation or doubt. This is more than just expert craftsmanship , this my friend is art !!

@mikerotchurts1103

4 жыл бұрын

After watching the video, how much do you think would be a fair price to buy it?

@CelticSemperTyrannis

4 жыл бұрын

@@mikerotchurts1103 well a Dyson fan is around $300.00. So, I would say a hand crafted one that took two days to build, which I'll guess is about 16 hours of work at $30.00 an hour would be $480.00 + the wee fan we'll say is $20.00. That puts us at $800.00 for a conservative price add another $200.00 to round it up to a solid 1K I think would be a fair estimate.

@supahx1421

4 жыл бұрын

Ok consoomer

You have a lot of skill, mate, and i think almost everyone wood agree.

@crudfingers6403

2 жыл бұрын

This isnt punny

@raymondschricker8040

2 жыл бұрын

@@crudfingers6403, that is pine with me.

@xerionis4576

2 жыл бұрын

@@raymondschricker8040 I don't think I'm maple to build anything as cool as him.

@raymondschricker8040

2 жыл бұрын

@@xerionis4576, hey, that's "oak"y. Don't feel badly.

@crudfingers6403

2 жыл бұрын

@@raymondschricker8040 its plane to see that you're rasping for trouble. I saw this post and had to re plywood. It's pretty screwed that someone could re router my attention from a woody good video that I'm ofcourse a fan of. But if I'm being totally fair, as much as that pun made me groan, it has to be said that you nailed it. Might need to get hammered to enjoy it next time though ;)

I love the technical creativity you demonstrate in this project. It made me think about production processes in a whole new way.

I know restoration and creation channels being largely silent has its own appeal, and I can appreciate that. However, there's something about a narrator on the video that acts like a calming guide on what's going on in the video. I dunno, it might just be a me-thing, but I appreciate the commenrary throughout the video.

@leifhietala8074

4 жыл бұрын

It's about the perfect level of narration: just enough to guide a complete newbie, not so much as to irritate someone familiar with the work. That's a trickier line to walk than most people realize.

@TheUltimoSniper

4 жыл бұрын

How It's Made.

@DlOisDOOMSCROLLING

4 жыл бұрын

Its a kinder way to say “here’s whats going on because you don’t think “

I said, out loud, sitting alone in my office, "ooooh that's smart" when you showed the guide you made for cutting the slots into the base. Thanks for sharing the video!

@prorambo5416

4 жыл бұрын

Eric Burnett same

@alek6362

4 жыл бұрын

Same

@ronent9441

4 жыл бұрын

Eric Burnett you watching KZread during work?😺

@omniomnivor9445

4 жыл бұрын

Same here. I'm sure my coworkers thought I was nuts.

@briannewton3535

4 жыл бұрын

Yup, me too.

i was initially disappointed to see that there was, in fact, a bladed fan included to move the air, and then i decided to unwind and appreciate that the aesthetic design was "bladeless". frankly i was interested in what sort of black magic could create airflow without fan blades... but this is nice.

@freya9107

3 жыл бұрын

I'm in the exact same boat. Was looking to see how he was making air flow and he just pulled out a normal fan. Overall really a cool-looking fan.

@nicholastart9247

3 жыл бұрын

even dison bladeless fans have blades bro

@freya9107

3 жыл бұрын

@@nicholastart9247 now that's what I can false advertising XD

@littlelarvitar667

3 жыл бұрын

never heard of a commercial bladeless fan before? thats what this was designed after

@CaTastrophy427

3 жыл бұрын

A piston pump could work, it's bladeless, but with a rather inconsistent flow and some added noise.

I really have to wonder about the almost 6,000 people who gave this a thumbs down. Like, wtf?!? I'd like to see any one of them post something as comprehensive and creative as this is. Maybe they're just envious. I don't know. I learned muite a bit watching this. Great stuff!

it would be so cool to throw a paper airplane through one of those

@shan0802

4 жыл бұрын

Oh yeah!! Good thinking!

@bigboldbicycle

4 жыл бұрын

Great idea. My bet is the paper pilot would vomit due to the turbulence. 😋

@acethefiredragon8525

4 жыл бұрын

Put them in a row and you can make it fly as long as it goes through another ring.

@jpotter124

4 жыл бұрын

It doesn’t work like you think it would☹️ I have a dyson fan and it just kinda falls to the ground the moment you fly one through it

@MrModTwelveFoot

4 жыл бұрын

I wonder... If you tied a paper/model plane to a string and fed the string through the fan, would the plane just hover? You'd need a well designed plane most likely.

I always wondered what Created the wind in a bladeless fan: Apparently it's blades.

@cheesequack7gaming531

3 жыл бұрын

Illuminati confirmed

@patrickkrueger3164

3 жыл бұрын

Sometimes they have a tour of the disks actually rotate at a fast enough speed to create wind

@patrickkrueger3164

3 жыл бұрын

@@cheesequack7gaming531 the Illuminati Freemason Lost symbol

@TheTazza114

3 жыл бұрын

😂 comment on point mate 👍

@mowageemowagee5947

3 жыл бұрын

@@patrickkrueger3164 So disc shaped blades then.....

I've never sat transfixed for half an hour watching ANY KZread video. except this one. marvellous workmanship Sir!

Если купить что-то подобное, вы купите не просто вентилятор, а произведение искусства!!!! МОЛОДЕЦ!!!! If you buy something like that, you buy not just a fan, but a work of art !!!! WELL DONE!!!!

Holy shit! This dude just made a Dyson fan out of wood. Skill level is at 3000! Great work my friend!

@tigerzero5216

4 жыл бұрын

I agree. I'm impressed with his wood working skill. (Oh, keep in mind. It was all done with scrap wood, which is the main point of the video. Don't waste the wood.) Also he revealed something about the marketed products claims it is a blade-less fan. That is false. It just looks that way. A traditional fan is in the base and you can't see it. So it looks fan less. I use to think those products did what they did by electrically charging the air alternately to make it flow. Give the air a positive charge and the next chamber would have an opposite charge. The air would move towards it. Now that the air is mostly negatively charged, have a positively charged chamber to attract that air and it an move it along to the next one. It could be done that way. But really. They have a very quiet fan in the base.

@tigerzero5216

4 жыл бұрын

@Red Pilled Fox "Wizardry" Exactly right. Kind of fits in with fake news/advertizement. Hehe. I bet it could be done though. A device that moves air with literally no moving parts. But it would probably take a lot of energy to do it. Just buy the 20 dollar fan instead of the 120+ dollar fan. They both do the same job.

@tigerzero5216

4 жыл бұрын

I'm replying to my own comment. I loved the craftsmanship you did. Fantastic work. That wood work was spot on. The best part of it was how it showed those blade-less fans were not truly blade-less.

@denvergevero9646

4 жыл бұрын

Chinese invented them first.

@GotCamel

4 жыл бұрын

Denver Gevero What’s your f@&$ing point. GTFOH with that mess.

This is such a great representation of your channel. Problem solving, fun, incredible skill, patience, educational, and fully entertaining. Thank you so much for sharing it with us!

@PaskMakes

4 жыл бұрын

Thanks very much Tharemy, glad you enjoyed it! :)

@EldeNova

4 жыл бұрын

@@PaskMakes Not to mention making a practical item, which doesn't look ugly! :P

@godspi4609

4 жыл бұрын

You deserve more subs my man that was fantastic

@humungous09

4 жыл бұрын

Hey Tharemy! Are you the cousin of Anthony Hopkins by any chance?

@tharemyhopkins5873

4 жыл бұрын

@@humungous09 the actor? Nope

Neat build! A minor change could be a dust filter/mesh in the bottom to reduce the amount of dust spread and dust in the fan (less cleaning and less allergies :P)

This is the safest woodworker ive ever seen on youtube, like ive seen people use one of those woodpusher things on the saw, but TWO?! Never before seen

“i’ll save salt for my dinner” best thing i heard in a while

@SR-qg7hw

4 жыл бұрын

Neon Indian me too! I haven’t read many comments past this, but I’m sure there are some criticizing his use of hot glue to mount the stock to the turning base, or maybe not!

@drew8753

4 жыл бұрын

Videos for kids

@bruh-jr3qi

4 жыл бұрын

@mrdabbleswithpotion my man what are you talking about

This was one of the most fun projects I've made! It involved plenty of problem solving, well before I even started making it. I think it came out fabulous as I honestly didn't know if it would work. Although, I think a more powerful fan would take it further still and maybe I'll pursue that at a later date. Thanks to all my Patreons who've had input in this one, encouraged me and gave me great advice! :)

@dustysparks

4 жыл бұрын

Try softening your hot glue with isopropylene alcohol to remove it (rubbing alcohol), it should peel right off

@thatcrazyguy1971

4 жыл бұрын

Nicely done! Question about your woodturning tools: I see you use most exclusively tools with inserts. What are the advantages? What tools do you use there?

@homer2336

4 жыл бұрын

This is what I look for in woodworking videos. Cool innovative projects that I may or may not build. Nicely done.

@DennisSuitters

4 жыл бұрын

@@thatcrazyguy1971 They are Carbide Scrapers, they are easier to use than traditional tools, and an easier learning curves, they get the job done though.

@forestlampcraft472

4 жыл бұрын

👍👍👍👍👍👍👍👍👍👍👍👍👍

I'm impressed by this build, it looks so beautiful... For all the halfwits out there, it is indeed considered a bladeless fan because there is the word "fan" in there, it simply means there isn't a blade where it's supposed to be. Although if you want something that doesn't have blades but moves air, it wouldn't be a "fan" at all. You would need an ion wind device that could move air with electricity.

I love how you show EVERYTHING...and from at least 2 povs. I'm learning so much from you. Thanks 🙏🙏🙏🙏. ( From South Africa)

My favorite part is when he made the mistake in lining up the vent thingies but kept a positive mindset and finished the project

@orangecathobby

4 жыл бұрын

The hallmark of an excellent tradesman isn't getting it right every time, it's knowing how to fix your mistakes and make it right.

@grayscreations7004

4 жыл бұрын

Neosi Axiom, the old adage, “Learn mistakes (or errors) and you will never make the same mistake again the next time”.

@emilior934

3 жыл бұрын

Bob ross.

I just burnt down my woodworking shop out of respect and decided to live vicariously through his videos. Great project. Well done!

@jdc2433

4 жыл бұрын

amen, brother! so funny

Really like this video, the voice this man has when narrating the steps is gold! The project looks sweet! 5K downvote!? what in the hell people? is it cause he didn't use salt!? He's saving it for dinner, stop being jealous. subscribed

I love it, so satisfying to watch how the project comes together and all challenges are solve. Thanks for the video it was definitely worth watching.

This has to be one of the best makes on KZread. Don't know how you're going to top this, unless you make a working nuclear submarine. What a top bloke.

@pthanos

4 жыл бұрын

Word!!

@M3rVsT4H

4 жыл бұрын

Scrapwood submarine.. :D

@mattyallwood

4 жыл бұрын

Timber cooling rods are problematic

@jimlee4961

4 жыл бұрын

wooden PC case or wooden xbox case would be cool. Something along those lines

@ras8916

4 жыл бұрын

Not sure a working nuclear submarine would be enough.

I never gave it any thought when I saw these in the store, but I never really knew how they worked. Thank you so much for your trial and error and showing the world 🌎 👍👍

@kennmossman8701

4 жыл бұрын

This works by simple redirection. The Dyson works on a different principle.

@PaskMakes

4 жыл бұрын

@@kennmossman8701 It works exactly like the Dyson does. :)

@kennmossman8701

4 жыл бұрын

@@PaskMakes www.jameco.com/Jameco/workshop/howitworks/dysonairmultiplier.html

@ConstantlyDamaged

4 жыл бұрын

@@kennmossman8701 You'll note the cross-section they show on the Dyson fan was the exact same cross-section he used on this. It's the exact same thing as a Dyson, but beautifully made with wood.

@kennmossman8701

4 жыл бұрын

@@ConstantlyDamaged The air flows through the channel in the pedestal, through a curved path, and comes out from small 16mm slits around the frame of the fan at a 16-degree angle slope. You may think that this just causes air to blow in the shape of the surface area of a cylinder, but because of the physical laws of inducement and entrainment, this allows for the surrounding air to also become drawn in from multiple areas around the fan. In other words, picture your TV weather map; a small low-pressure region is created which actually draws the air in from behind it, like a forming tropical storm. This simultaneous push and pull of air creates a quiet, even, constant flow of cool breeze.

OUTSTANDING! Between this and the articulating light you created, I can't wait to get my little workshop back up and running!!

You’re a genius ! Your work is pure art. Thank you for allowing us to join you in your love of woodworking ! Be safe, happy and healthy ! Cheers !

"It worked, which is a bonus" If only I had that mindset in the past years..

@omegablaze8008

4 жыл бұрын

That line hit me too... What a peaceful mindset

@maruftim

4 жыл бұрын

Regretful moments

@D-Vinko

4 жыл бұрын

I relate to his mindset, often even failures can be reused

@theRealPlaidRabbit

4 жыл бұрын

Isn't that what Oppenheimer said about the bomb?

@johnhodgetts6617

4 жыл бұрын

I mean, even if it hadn't worked, he could have made a cool-looking flower pot out of it or something. It was a beautiful piece of wood turning.

I watch these types of videos and say to myself "I can do that if I stopped watching KZread and put some effort into a handy craft instead"... Then I click the Up Next button to see how to make a Brick Rocket Stove... ...Rinse and Repeat... Seriously, great work Mr. Man.

I’m sure I’ve commented this on your channel before but I’d like to say it again. I really appreciate how much you embrace all the possible ways of doing things rather than just looking at it though a “woodworking only” lens. That was a big barrier when I was growing up and it took me years to learn and develop skills in other areas like metal fabrication and electronics. This is to say that I feel like you’re opening the door for woodworkers to embrace other disciplines and expand their capabilities.

I thought most people knew what "bladeless" fans were by now, the design is over 10 years old. They're as much bladeless as floating tables are actually floating, and that's fine. it's fine to call things like this by what they're intended to "appear" to be. Seriously I figured this thing out on my own when I was in jr high, when Dyson first released these things and they were super popular. Get over yourselves. Do you people have any idea how impractical an ionic propulsion fan would be? Aside from the fact that putting one inside a wooden housing would probably immediately catch it on fire. I guess you *could* make a bellow "fan". But this is a wood working channel not an engineering channel, and somebody else did that recently. This is just outstanding craftsmanship.

This was easily the coolest scrap wood challenge to date. It was a breath of fresh air.

@mihailpetrovici5044

4 жыл бұрын

Hehe

@triplem9805

4 жыл бұрын

Ha! I see what you did there!

@animemixking347

4 жыл бұрын

Funny

@harleyme3163

4 жыл бұрын

ya... fan in a duct... use em all the time in remote control aircraft

Your craftsmanship is incomparable, you have an enormous talent at devising jigs and creating innovative design features, and best of all you possess healthy amounts of self-deprecation and abiding patience! From Kauai...best wishes, stay healthy, and give the dog a hug.

@videobakker1

4 жыл бұрын

I agree totally

@dyaneblack5648

4 жыл бұрын

Here, here! :)

You. Are. INCREDIBLE! 🙌🙌🙌 I can’t believe anyone had negative things to say about this project. Some people just need to get a life. Haha. Love what you do and how you go about it. 👏👏👏

Mr Pask, you move quicker than anyone I've ever seen in the shop! Thanks for posting the great entertaining videos. Your narration (speaking voice) is a great compliment to your videos.

as a woodworker myself i have to say this is the most beautiful thing ive seen in a very very long time!!! and the jig for the air intake slots was brilliant. the whole project is sooo aesthetically pleasing!!!

This is maybe the most aesthetically pleasing thing I've seen on youtube

@paulroberts3639

2 жыл бұрын

Have you seen the women’s pole vaulting? Never mind..

I have to be honest. You're very good with a layeth, really. I'm not very good at turning and you do beautiful work. It's a pleasure watching someone doing beautiful work. Even if the fans worked or not, you did a beautiful turning job. Congratz!

There is so much detail in this, I’m impressed. Well done. Definitely a showcase piece

That slot jig was just brilliant - what a cool project.

There's nothing more soothing than watching a craftsman or craftswoman as they create. Years of their dedication, failures and triumphs, money, injuries, etc. condensed into a half hour of satisfaction for the rest of us. Thank you for allowing us to live vicariously through your efforts and for sharing your talent. This is gorgeous. Thank you.

@highpitwilma

4 жыл бұрын

Aodhan Paeder Mac Cionaoith..what a lovely thruthful and inspiring comment!

What a beautiful job!!!! Love the segments of wood being visible.

This is the third or fourth time I've watched this. I enjoy people stepping out of their comfort zone and making beautiful pieces.

This is a ridiculous idea, ridiculously well thought out and executed. Love that router jig, genius.

True craftsmanship and ingenuity. Your work is a marriage between the ancient craft of woodwork with the new era technology. KZread should promote such channels instead of viral meaningless contents in the name of entertainment. You, sir, got yourself a new subscriber. Thank you for sharing your work and please keep it coming.

I never bought a Dyson so-called "bladeless fan" (over priced gadgetry) and was able to figure out right away. It's a form of "duct": 1. passageway in a building or machine for air. I build things all the time...it's fun. Maybe rename your post "anything Dyson makes I can make out of wood". I appreciate everything about wood...what a gift from (dare I say) God. Great video....thanks for taking the time.

“Bad at electronics” Just takes it apart and is able to put it back together. Brilliant and beautiful job

William Morris said: "Have nothing in your house that you do not know to be useful or believe to be beautiful." That wooden bladeless fan meets both criteria. I'm amazed by your skill and problem-solving.

“I’ve a few scraps of camphor laurel that were offcuts from a chopping board. I’ve had a quick go at building a fully functioning city for around 200000 people, and for fun I’ve included a public transport network and clean energy reactor.”

@Holocaustica

4 жыл бұрын

Lol. The city now has the third largest economy in the world.

@57thorns

4 жыл бұрын

@@Holocaustica And it is all based on scrap wood.

@propfella

4 жыл бұрын

Bobafetting, I didn't realise how many 6 year olds infested KZread. It appears a number of them followed each other here simply to show just how childish they are. Now run away, your Mummy is calling, it's way past your bed time. I'm sure you already know what you can do with your offcuts, this time try it sideways.

@57thorns

4 жыл бұрын

​@@propfella The number if cranky 90-year olds however is larger.

@propfella

4 жыл бұрын

@@57thorns OK, so please tell us which person is the amazing age of 90, and why do you associate people of that age as cranky? It appears you're associating with the wrong 90 year olds in your nursing home. If you can, get out a little more and meet more 90 year olds. I assure you I've met many more cranky 40 year olds than those in their 90's. You appear extremely judgemental, or should I shorten that to simply mental?

You are a fine craftsman Sir, as well as an excellent video producer. It is a pleasure to watch you at work.

I can't decide which was better: watching your thought process during work or the end result. I'm impressed by both!

I'm not a woodworker, I actually only saw this because it loaded immediately after another video I was watching, but I loved watching this! I always wished I had the tools for woodworking, I am an upholsterer and seamstress, and I found this whole process fascinating - I couldn't stop watching it. Great job! It's a beautiful fan, and the work that goes into it is even more appreciated when you get to see the whole process.

@scottxfactoraudio8799

4 жыл бұрын

Oh lord,!, Now I feel that I must invent an actual ""Bladeless", (Bladeless), fan. It can be done. Using, "Bournoulli's" forth principle, His "Theorem", that of "variable pressures" will do it. But this fellow here will have to actually make it. Not sure that I have his patience.

@ranekeisenkralle8265

4 жыл бұрын

Nora i can pretty much relate. I like working with wood (got that from my grandfather) but don't have the tools for anything like this.

That jig for the trim router was a genius move. Kudos again, sir!

This guys wisdom and knowledge is all aces. I love it.two thumbs up.

Every step had such a unique solution to it, really well done piece i absolutely love the whole look of it and how well it works. Absolutely brilliant

Wireless headphones have wires inside Bladeless fans have blades inside

@df3yt

4 жыл бұрын

My cashless wallet doesn't have cash inside... still broke ;).

@purpleprince2598

4 жыл бұрын

df3yt LMBO

@matthewborg3594

4 жыл бұрын

And this is a commentless comment.

@rishavbali_

4 жыл бұрын

Wooden fan has fan inside wood.

@chandumca062

4 жыл бұрын

Haha

Mate, your skills are out of this world. Your patience is commendable. Keep up the good work!👍🏻

@IAmMrGreat

4 жыл бұрын

Abjt G did it hurt? Becoming a fan? I don’t think I’d want any of the things he did to the wood done to me, maybe being rubbed in a layer of oil.

@nightowl2282

4 жыл бұрын

Are you also bladeless?

@KnightClashR

4 жыл бұрын

hehe a "fan" now...

@sl9sl9

4 жыл бұрын

And do you operate on 110 or 240 volts?

Thoroughly impressed with your craftsmanship, really good to see your work, thanks for the video

That was exceedingly sweet! I've never been even tempted to buy a D*s*n 'fan', but, I would jump at the chance to buy a Pask fan! I know, I know, I could make my own, but, I lack the patience necessary to do that. Kudos to you, sir! (And I learned how the D*s*n 'fan' works, to boot! Something I've wondered every time I've seen one, thanks!)

Was hovering over the fast forward but 28 minutes later realised I'd felt more calm and satisfied than I have all weekend. Excellent video, beautiful creation and lots of good ideas. Thank you.

I literally didn’t even notice 28 minutes go by bravo my boy

@sleepyfella

4 жыл бұрын

Do you play pokemon go ?

@marguy1388

4 жыл бұрын

CUTE bear yes

@MrCarnutbill67

4 жыл бұрын

Jesus, I didn’t even pay attention to how long the video was until I read this! That wood species is beautiful.

@marcusaureliusbermen974

4 жыл бұрын

Now I know :/

@EnsignLovell

4 жыл бұрын

Wait what......? That was 28 minutes? Honestly felt like 10 😂

I can't believe this is all made of wood it's incredible ! Your mastery of this noble material is unbelievable and I really enjoyed your work. Hats off and keep going !!!

I KNEW they had fans! Thank you for showing me how this cool technology works! You're a talented man, I would love to get into lathing and woodworking, but I don't have that kind of money! Loved the video, keep it up!

An absolute masterclass in turning, jig making and use, routing and so many other different things. Just stunning!

Is it just me, or did anyone else notice the dog's reaction to him testing the fan speed at 25:09?

@youngjesus5992

4 жыл бұрын

Conner Taylor I saw that😂😂

@kevinheiman944

4 жыл бұрын

🙋‍♂️

@justShine78

4 жыл бұрын

Dan! You got eyes mate!

@AryanKumar-jo1pz

4 жыл бұрын

ya, I did too

@BluesHand

4 жыл бұрын

Out of over 2.8 million views only 127 of us noticed the the masters' faithful companion.......? Are we just animal lovers or do we see things that others don't? In any case this is a video worth watching! Thanks Pask Makes!

The wood whisperer says "Even I can do it". Understatement of untold magnitude!

i really enjoyed every second of this video from problem solving/creating a way to cut wood/slowmotion moments/and how you turned it into a priceless fan.thank you man it was great job.wish you the best

I want one, but shaped like a tree with bladeless fans as leaves. I want it to be tall and proud so everyone can see how freaking bladeless its beautiful fanholes are. And I want to put it in my yard, so i can sit in a breeze on a hot summers day, enjoying a cold drink, while i sit in awe of this magical, groovy air-moving device. Awesome build, ignore the keyboard-warriors out there man and just keep pooping out brilliant stuff!

I love that you leave in the sounds even when you speed up the film. Gives it a bit of a Wallace and grommet vibe 💕

First thing's first. She's a beauty. I'm really quite speechless. I'd strongly suggest going to the dump and sourcing a working drying machine fan. those babies are so powerful they can take a finger if not careful enough (plus they are close in size to computer fans). They also take straight unmodded socket voltage and amperage (usually, tested on euro 220v) for speed control i'd just get a dimmer.

Brilliant project with unbelievable skills. Thanks for sharing it with us and ignore the ignorant negative comments. They are just jealous they can't do it! Take care!

if you do look into using a pc fan, they come in 2 verities, one is for "high airflow" where there is no pressure difference, these are just good at moving air where there is no pressure difference to worry about.. the other is "static pressure" which is good for pushing air through constricted spaces, as they are better for overcoming differences in air pressure. i suspect the latter will be better for your purposes.

I’m a woman in my 60s and I watched the entire show with great pleasure, thankyou for your clever. Self

@bsocmtomsdcs815

3 жыл бұрын

Next up on the "Scrapwood Challenge," a cold fusion reactor.

@poohshmoo9892

3 жыл бұрын

He is married.

Who on earth wouldn’t like this video? This is really really cool.

Awesome, I learned quite a bit, thank you. Definition - Although it is called a "bladeless" fan, the Dyson Air Multiplier does indeed have blades within; they're just hidden inside the pedestal stand.

This is a work of art even if it never moved any air! The fact that it works makes it that much better. I am amazed at your skill to make this from scrap wood. The jigs you made are worthy of a separate video just highlighting those creations! Thank you for sharing!

Some people just dind’t get the idea. It’s a fun fan project.Tottaly worthed !!!!!👏👏👏👏👏

Well done - head and shoulders above most YT projecteers !

Wow. It's almost hypnotic to watch him at work.

Seeing "lots of problem solving" as a project quality criterion is something I learned from you! Best video in a long time!

20 years ago I've wanted to become a carpenter. Sadly - for the profession - I've had terrible experiences with school traineeship programs and thus forfeit the idea and became a programmer. Today I find myself watching this kind of videos on a very frequent basis and can't think anything but "Oh, i'd love to try doing that" :))) I love the clever ideas (The slots on the cylinder for example). Finished product looks really great. Job well done mate!

@patrikwihlke4170

4 жыл бұрын

Hey, I'm a programmer too and love both code and wood working but never did much of the latter. A while ago I decided to just go for it and built a wardrobe on either side of the bed with overhead storage, side boxes for phones or books and inset led strips etc. I even spray painted it myself which required some practice and time. It all certainly took more time than expected but turned out great and it brought a lot of happiness to finally make something! I would recommend just starting something, anything! It's really never too late.

@WarriorOfProdigy

4 жыл бұрын

Yeah, but you still need to do something for living. No carpenter can make only fancy gadgets. You have to make kitchen after kitchen and time to time one interesting project. Believe me. My brother-in-law is a carpenter and he's definitely not so enthusiastic after years. One must be famous on YT...that's the way.

@patrikwihlke4170

4 жыл бұрын

To clarify on my post, keep your day job but start as a hobby as mentioned by others. If you really want to do more of it in the end you can become a carpenter. There are no age restrictions or education required as long as you do a good job of it.

@flyinpolack6633

4 жыл бұрын

Get yourself a lathe and have at it!

It's hard not to be impressed by your woodworking skills. Amazing project :)

Astonished by your capacities. Really, I am impressed. Thank you for sharing such a beautiful video.