Nice, simple build. I like the design and ability to fold. Sometimes you need a light duty set and don't need them built to hold a thousand pounds. I've got to say at the beginning of the video... please don't cut long stock with a miter gauge up against the fence like that. It is very dangerous and easy to twist, causing a kickback... especially with you standing directly behind the piece being cut. You moved the fence over at 1:36, which was good. Use a starter spacer.

I never saw a woodworker working so clean.

@NavinBetamax

2 жыл бұрын

The secret is Soap & Water ?! Lol !

Excellent Work Horses definitely will save space in new work shed I'm building. thanks

Simple, easy and best! Thank you!

Love 💕 it from Australia 🇦🇺 🌹👏👏👏

all ingenious is simple! Well done...

I am wanting to make something like this to put my truck's camper shell on when I need to take it off my truck.

This was a great video. Saw horses are very over priced in the store. I will definitely be trying this. Thank you.

Great Job 👍....

Nice.. thank you for your video.. i will be making this on the weekend..

That’s the best video I’ve seen of the folding saw horse. The small peice of timber at the top on one side. Wonder why ??

This is the simplest folding Sawhorse design that I have found on KZread. The strength of the hinges seems to be extremely important. I will be making a set of these but will probably cut dados to mount the two leg crossbar supports so they will have some extra lateral stability. And, I may find a more secure way to crimp the cable ferrules, as well. I do love the idea of using cables to prevent splaying of the legs. But irregardless of that, this is a great design. Thanks for sharing.

@j-woodworking9573

4 жыл бұрын

Thanks for your long and kind comment sir.

Amazing job, great design!! Thank you for sharing it.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Great vid will do my own very soon thx

- Really good project. Thanx 4 sharing.

@j-woodworking9573

4 жыл бұрын

Thanks for watching sir.

Parabéns. Simples e eficiente. Obrigado por nos ensinar. Deus te abençoe sempre mais

good work! tks.

This is an excellent design and execution 👍 After reviewing a dozen other designs, I think this will be the model that I will use. I also admire and envy your shop. It is perfection!! BRAVO from Spokane Washington USA 👍👍👍

Good job man

대단하네요 참 좋은정보 감사합니다

Muito bem feito. Parabéns.

J brilliant easy to follow thanks alot

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Like the music and the design of the sawhorses, Kiitos

@sharonherrin

4 жыл бұрын

The lumber you use is higher quality nice job

@j-woodworking9573

4 жыл бұрын

The music is from KZread free music. Thanks.

Excelente trabajo ....gracias

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Lindo de tão simples! Com certeza é esse que vou fazer.

Super video !!!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Good job

Nice.

굳 입니다.

Japan man make best plan!

Very nice design.

@j-woodworking9573

4 жыл бұрын

Thanks sir.

Buenas noches muy bueno el caballete excelente técnica .

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

O melhor cavalete da internet

perfekt 🤘😎👍💚🍻🖖

The 1x2 brace just under the top of the uppermost cross piece, will pinch the daylights out of your fingers, when the hinged parts move. Been there, done that.!!!

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

@scottclark1975

2 жыл бұрын

I wondered why it was even there.

잘 보았습니다 ^^ 도면이나 사용되는 나무의 사이즈 각도 공유 해 주시면 감사하겠습니다

Спасибо!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Design is good, but the screw heads bind and strain the hinge when closed.

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

Very nice and light weight, however, the hinges need countersinking as the screws stick up to far and bind when these fold up.

@j-woodworking9573

3 жыл бұрын

Thanks for your teaching sir.

Excellent work. Please could you tell the measurements. Thank you

👌👌👌

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Could you describe those tools and accessories?

Hello J-woodworking... is it possible to post exact measurements or a schematic for this sawhorse ? I really intend to do this myself

@j-woodworking9573

4 жыл бұрын

cross bar .. 1000(1ea), 900mm(3ea) column bar .. 850mm(4ea) Sorry. I'm not good at English.

@baxtiangrasu6829

4 жыл бұрын

No worries, i watched all your videos.. i love your work... it would be a great idea to post graphic schematics of your projects as well... for diy purposes.

Once I tried doing what he does which is grabbing the small cut piece, the blad took it and grabbed my index finger with it. Luckily it just took my nail

How about a plan please

Con la falta de cuidado para quitar el sobrante con la sierra encendida, este no debe ser un video instruccional...!

que medidas utiliso

An excellent idea but I have a few comments. First, I would never cut the leg length if using a table saw with out a stop block clamped to the fence to reduce the chance of the work piece binding at the blade. Third, I would use a push handle to brush the cutoff piece away from the blade, may save a finger .Fourth , I would use a mitre saw for most if not all of the angle cuts or a sled if using the table saw. I would use a T-strap hinge to reduce the stress at the pivoting joint when opening the sawhorse. I like the use of swageing on the wire ends. Good luck and thanks for the idea.

@ldlink3935

4 жыл бұрын

Jeez, I would love to use all that equipment also, but all I have is a hand held circular saw, wish me luck!!! (though, I can assure you I won't be ripping any board--haha). Second, I don't have the equipment in the video, but I've watched enough video's to know his safety procedures are on the lax side as you mentioned....when he grabbed that scrap (aka cutoff piece), I gasped!!!

What are the dimensions? Glen Orie from Trinidad and Tobago.

what no miter saw????

Poderia nos fornecer as medidas das peças, por favor

Can you give me the measurements and a list of things I need to buy please?

@j-woodworking9573

3 жыл бұрын

100w x 85h cm. Hinges, wire. Sorry I don't have plans. Thanks for watching sir.

Why don’t you use a riving knife?

Капец. У него пальцы, свои или уже протезы?

no safety shoes!

테이블쏘로 정재단해서 만들었는데, 수평이 안맞네요?

@kangdeveloper82

3 жыл бұрын

@@j-woodworking9573 아니 이 영상에 쏘호스가 평이 안맞는다는 이야기입니다 9:40 부터 보면 흔들거리죠 공방 바닥이 수평이 안맞진 않을것 같아서 말씀드린거에요

@j-woodworking9573

3 жыл бұрын

그런가요. 죄송합니다. 더 잘 만들도록 노력하겠습니다. 감사합니다.

@kangdeveloper82

3 жыл бұрын

@@j-woodworking9573 에이 아닙니다 제 생각에 분명 모르시고 작업하신건 아닌것 같고 원인이 궁금해서 여쭈었어요

@j-woodworking9573

3 жыл бұрын

저는 직업목수가 아닙니다. 운 좋게 공간이 있어서 작업을 할 수 있고요. 이 영상을 올릴 당시에는 실력도 많이 부족했고요. 유튜브 덕분에 많이 배우고 있습니다.

немного-бы клея и краски. зачем верхняя,боковая перемычка?

the stocks are too large to cut with a fence that's a dangerous practice. the design is nice though

@paulk5311

3 жыл бұрын

yeah no need for a fence there. just use the miter gauge. i had to do a double take as i did not notice him using a fence at first. i don't usually watch whole videos such as this. i fast forward to select parts to get the gist of it.

Dimension please

Sling clapm?

Can anyone provide the size of wood in inches (i.e 2x6" for the legs)? thank you in advance.

@j-woodworking9573

3 жыл бұрын

I used 2x4". Thanks for watching sir.

Not bad, but two things: This design needs something to keep the legs apart when in use. Last thing you want is a shift in load which could cause the sawhorse to fold on you. The surface area of the top is a bit small. I prefer a beefier build, like kzread.info/dash/bejne/kWqoltKenJDOe9o.html

@j-woodworking9573

4 жыл бұрын

Thanks for your kind comment. Nothing can be perfect.

@famousseamus17

4 жыл бұрын

@@j-woodworking9573 Great job!

@NavinBetamax

2 жыл бұрын

@@j-woodworking9573 .......So.....please make a video on how to make Nothing !

почему клей не использовали. Если у вас нету , я могу выслать

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

+++

Por favor las medidas

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Attention à vos doigts,use thé Gard...

@j-woodworking9573

4 жыл бұрын

sorry sir.

Placing screws near the edge of the 2" x 4" without pre-drilling is a bad idea.

@j-woodworking9573

4 жыл бұрын

Thanks for your kind tip sir.

@ldlink3935

4 жыл бұрын

Except when using self piloting/tapping screws. Not sure what was used in video. But you leave good advice, just not sure if it is relevant to video...

А в стране Спичек. Нехвотает

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Sorry sir, a really good example of not to work at a table saw. Never ever take away so tiny pieces without a push stick. Keep away hand an fingers from a running saw blade.

On such equipment, I could create something more interesting!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@kenshepherd6831

3 жыл бұрын

Look at his other videos.

@samanthapaisley6436

2 жыл бұрын

why dont you then