This is great man, thanks for these "how to" videos, really helpful as I want to learn to outfit my boats :). Would love to see a video of how to make the leg risers

@WadeHarrison

3 жыл бұрын

thanks and I was thinking of something but its really just a wedge piece of foam under the front thigh

@bobbywest1304

3 жыл бұрын

@@WadeHarrison I'd love to see a video of dialing in a modern pyranha creek boat with the stout 2 outfitting. I have both a 9r and machno and have never felt like I fit completely right. I think having a foam heel block, leg risers, this style hip pads and those thigh hookers would probably be good. I'm going to try and implement all that, I just suck at getting a feel for the shapes and sizes of all the foam I need to cut.

Thanks for the video! Just did this and it works like a charm

@WadeHarrison

2 жыл бұрын

Glad it helped!

Thank you. I’m in lockdown in Australia and haven’t been able to go to shops other then grocery shops and I was able to get a foam yoga block and cut it in half shape it a little for my new kayak which is really wide on me, people thought I was weird and strange doing this but it feels better now too paddle, I found out though when I got capsized in the surf, first time. The block floated out now I need to glue in, but you have helped me know the edging and shape I’m needing to hold me in above the hips. So thank you. Now I feel heaps better. :)

@WadeHarrison

2 жыл бұрын

Yeah need contact cement or spray glue with tape to really hold them in

Cool man, good job 💪🏻

@WadeHarrison

Жыл бұрын

Thanks

Nicely done Good point about beveling at the outer edges toward the front to avoid the leg falling asleep

@WadeHarrison

Жыл бұрын

Yup I learned the hard way

Nice video

@WadeHarrison

3 жыл бұрын

Thanks

I have outfitted dozens of boats starting from the kevlar/s-glass boats to plastic. The foam he has is from the support wall is mini-cell and you can buy blocks of it. Hang on to the scraps you cut off as they make great squeegees for the weldwood wood contact cement I have always used to glue the hip and knee pads in later. Just cut the scraps into a triangular shape with a thin edge and you have nice tool for fixing your old coolers with G-flex epoxy or spreading bondo on you old car. I agree the key is to make the "wedge" looser on the bottom for comfort on your hips and then tighter and hider on top and even with the rim of the cockpit. You can always sand them down later, so I make them tight and carry some "30 grit" sandpaper with you when boating first few times so you can adjust them further if too tight. I would lightly rough sand the back and the boat side with some 100 grit sandpaper before you apply the contact cement so the cement can get a good bond. I use a drywall knife for the first cuts, sure form if I have one and then 30-60 grit sandpaper wrapped around a block of mincell foam. I use the weldwood red can contact cement and apply like repairing hypalon rafts, 2 thin coats minimum and let each coat dry to beyond tacky, like 15 minutes or more. Less is more when it comes to glue. I mark the outline of the hip pads so I know where to spread the glue on the boat. Work in shaded area, no direct sun. Use PPE, gloves and chemical respirator with fresh filters. No need to duct tape anything if you prep this right and let the glue dry between coats. You can smooth it out with 100 grit, but really it does not matter and has a better grip when left fuzzy. When you get into a tight fit, you tilt your hips and do one side first then the other, mindfulness matters and then they last forever. Otherwise they can rip out if you just force your hips in. You want a nice exaggerated "hook" shape with rounded shape to catch just above your hip bones to hold you in when upside down and being trashed in a violent hole.

@WadeHarrison

Жыл бұрын

Great feedback I have tried several different shapes also it just seems this shape works great for me

@marciaewell2661

Жыл бұрын

@@WadeHarrison Thanks! Everyone is different in our body shape and preference on tightness. Not sure the "one size" fits all approach a kayak maker might include is gonna be good enough for most of us boaters that want a really tight secure fit. The boats are made so wide now to accommodate bigger people, I think probably a custom fit for hips and thighs is the best way to really get both comfort and control.

All my boats have homemade hip and thigh pads. Have never had a boat that feels like a comfy couch. Anyway, don't forget to trim the top of the pad so it doesn't interfere with the skirt fitting. Nice tutorial,

@WadeHarrison

Жыл бұрын

Thanks yeah I do this in all my older boats and I never noticed anything interfering with the skirt

@ch678able

Жыл бұрын

@@WadeHarrison It looked to be higher than the combing. All's well. Good job with your utube presentations. Watch it all.

I miss the days of fiberglass cloth, resin, kicker and fiberglass dust in a run-down old garage. I've used closed cell to make hip and knee braces pretty much just like you're making them. Just make sure they're smooth and not likely to catch clothing when you bail.

@WadeHarrison

3 жыл бұрын

oh the good ol days

Great video, one question: How do you get a smoother surface finish on the pads? They look rough-cut and not quite finished. Can you sand them smooth or does the material remain "hairy" even after sanding? Thanks!

@WadeHarrison

2 жыл бұрын

You can go over them with high grit sandpaper but I just use the rasp and get them where I want them and leave them like that.

@powskier

2 жыл бұрын

I remember from watching a kayak shop do it back in the 90s that the last step was to go over it quickly with a torch to seal the pores and smooth it out.

You should do one on how to make your own thigh hooks. Those LL ones are wimpy

@WadeHarrison

3 жыл бұрын

I will see if can put something together

@kayakgirlcentralcoast3721

2 жыл бұрын

Yes. I don’t have anything in my kayak for thighs. I cut up and glued in gym mats layered. My hubby had some glue in a can like yours. Never knew about glue in a spray until then, it foamed up.his too American but lived in Australia with me.

I’m not crazy right... Wade is probably outfitting SunDolphin boats out of boredom and just not posting them right???

@WadeHarrison

3 жыл бұрын

HahHah actually sounds like a great video 😊

Wade, was that seat originally adjustable or fixed like the vengeance/medieval?

@WadeHarrison

2 жыл бұрын

I moved it back and screwed it down

Have you made a video on how to upgrade the back band to ratchets?

@WadeHarrison

3 жыл бұрын

No because it’s just really getting your hands on a dagger thigh brace and backband set up

Wade where is the best place to get the foam pad wedges?

@WadeHarrison

Жыл бұрын

About any paddle sports store carry’s minicell foam

Hi , I’m new to WW kayaking . As an older guy (54) , I find the hip pads hurt after just a little time . Is there a softer solution that wouldn’t cause so much pain . My boat = Jackson Z3 EDIT : I’m not concerned with aesthetics , just comfort & control

@WadeHarrison

2 жыл бұрын

try lifting the hip pads higher usually is a pressure point on the hip try to adjust the foam

@keystonedaytrip238

2 жыл бұрын

@@WadeHarrison Thx will give it a try . The boat is actually sitting on my living-room floor which makes it convenient to work on :)

Nice id! What size? I've got a 6.9 that I bend my bones into every now and then. It's not as handsome as your's though, solid dark blue with painted bow.

@WadeHarrison

3 жыл бұрын

mine is the ID7.0 I actually found this one for 125$ and picked it up asap

@andrewnau433

3 жыл бұрын

@@WadeHarrison nice, got mine for $100 but it's a late summer naked, no shoes to fit boat lol

I do often have problems with feet asleep. Any recommendations on get it solved?

@WadeHarrison

3 жыл бұрын

trey to adjust your hip pads up higher so not to hit a pressure point

@ucb0y

3 жыл бұрын

@@WadeHarrison thanks mate! Do you think it is better to have contact/pressure higher up than low down?

@kayakgirlcentralcoast3721

2 жыл бұрын

I put a memory foam cushion under my feet