This was just what I needed honestly, I’ve been running on a used kayak not set up for me for months and I had no idea what to do to get it all nice and comfy. Thanks Bren!

Just got a new Scorch X. Surprising that there is *nothing* that I could see on the Pyranha website or in the manual about how to outfit your boat (apart from a note telling you to stick in the foam foot pad that's on it, or even a link to a video like this. I think this covers it, would like your take on the foot blocks. I did see that Wade Harrison has a quick clip of the heel block he put in. Would also be good to get model specific air bag recommendations as well. I know I could wing it, but this is my first Pyranha boat, and first new one, so I'd like to get it right, and make the best of what's in there. So thanks for putting this together, it seems to cover off most of things.

Thanks for the video man very informational and you’re exactly right this is my first Whitewater kayak and I have no idea how to outfit it but after watching your video I kind of know what I’m doing thanks again man and sweet kayak I really like your colors

Great video guys! SEND!

Great video Bren, was about a month to late for me fitting out my new 9R but got to say I did my seat base foam exactly the same way. lol

Great video! Just bought a machno. 🤘🏼

Thank you this really helped

ha I lost the Alan key on the day I got my sick New Jed 😂 as always great vid cheers

GREAT VIDEO VERY EDUCATIONAL 👍👍👍

@Senders

5 жыл бұрын

Thanks mate, goodluck with your future outfitting!

Great video bren wish you had done this video when I got my burn 3. Took me about an hour to figure out what I needed to do. But got there in the end. Keep up the great work guys 👍 👍 👍 👍

@Senders

5 жыл бұрын

Thanks dude! Also you won a prize in our 5k Giveaway. Can you please send me your shipping address to info.wearesend@gmail.com

@elliotrutherford4863

5 жыл бұрын

Thanks for picking me I have sent you my address 👍👍👍👍

Nice tips. It would be awesome if you could make a short video on flying on airlines with a kayak. Like which airlines are the best to go with that allow them and then other loopholes for companies that don't allow it but disguising it as a surf board or whatever.

man this guy has two german shepherds, so do i . your a proper good dude i can see

When cutting the big pads with a knife it’s easier to cut if you run tap water over the foam and knife blade. Much cleaner cut.

Any info or link on how to do the foot block you mentioned?

Like the video, watched several of yours! I currently paddle a Z.One and a Burn III, both bought second hand but the Burn was basically new. I have contacted Pyranha several times about purchasing the complete outfitting pack such as the one you have but have never gotten a response and i live in the US and there isn't any Pyranha dealers near me that I am aware of... any suggestions??

Hey bren! Have you tried the seat back in the ripper 2 large? How was it? Cheers!

Could someone explain how moving the seat is beneficial? Like why move it all the way back in the ripper?

Hey Brent I loved seeing a German Shepherd in your video. Great river dog breed; I have memories of high school me riding with my two kayaking buddies, adults, in the front seat and me and a huge German Shepherd in backseat. 4 kayaks in the bed of the pickup....

RIP Bren.

hey, what size machno is that and how tall are you? thanks bud!

👍

just bought a pyranha stretch l/xl dont know that much about outfitting but there dosent seem to be any foot rests is there anything i can put in it for foot support any help would be much appreciated

The allen key tip is genius.. I think I'll shove it in and stick a bit of high vis duct tape over mine.

Thanks Bren , great advise on outfitting, interested in the seat position, i recently bought a Scorch , where do you have the seat position in your scorch , you mentioned you have it back in your ripper and 9R2 but on centre in machno , thanks Colin 🙏

@Senders

Жыл бұрын

Thanks mate, I have the seat in the middle in the Scorch and find that works best for me at 75kg.

Thanks Bren!! I was having a bitch of a time moving my Jed seat back. In my wavesport I just loosen the screws a bit and knock it back or forward…not take them all the way out 😮 your tip totally helped reduce the amount of cursing 🤬 and I got it moved 😃 thanks again!!

@hughloraine9660

2 жыл бұрын

Accousticfixation…. I have a new large JED. I am 6 ft, 180, size 10 shoes. Have moved the seat back. Do you have any other tricks which might help the tall paddler fit?

@acousticfixation

2 жыл бұрын

@@hughloraine9660 are you using a foam foot block or happy feet?

I'd like to make a footblock for my Machno but can't find any info on how to do that. Anyone got any Beta on that? Enjoying the videos, keep them coming Bren!

@Senders

5 жыл бұрын

Thanks mate! Have a Google there is a good blog about it on the pyranha site from many years ago

You mentioned in reply to another comment about Daggers leg lifter making you slouch and how you raise the back of your seat to put you in a more aggressive posture. Do you do this with the foam under the seat cushion? I’d really like to try this. Any tips or info would be appreciated. Thanks!

@Senders

4 жыл бұрын

I use a peice of the foam roll that comes with the kayak and double it over and then glue it to the back of my seat. Doesn't take much but I think it really helps!

Do you ever glue the center pillar down? From mine getting squished on roofs and being shouldered lots, It pulls the pillar off to one side, thinking of trying to fix it in place a bit more. Also had a few problems with the back band and the grooved plastic ratchet bits snapping in the past, would be pretty sweet if they came stock with some solid webbing and maybe a stronger join between the strap and the ratchet. I dunno, maybe I just kick with my legs too much!

@danielassmann8710

5 жыл бұрын

Just get yourself a pair of Dagger backbands. They have a metal eye and just dont break. You can cut free the double-D rings off the pyranha bands and use them to connect the two dagger bands in the back of your backrest. Works a charm since 3 years for me and i did break the originals at least twice a year before that. Also: try lowering your backrest (you can pull it down with a small strap at the bottom center of the backrest) - that reduces the amount of pressure you put on it while boofing without reducing the snugness of the fit onto your pelvis. It actually improves the sideways agility of your torso as well. As to the compatibility of the ratchets: I'm quite sure its the same supplier, so the parts are interchangeable.

@dgrfsthrgsergwrtghasefq

5 жыл бұрын

I would try gluing thin shims to your pillar to make it taller and more snug before gluing the pillar down, I glued a few down back in the day when we were melting and squishing boats to make them slicier and change the rocker proflie but it is a huge pain in the ass as you must sand the kayak where you are gluing it or the glue will last about a month before failing and getting the pillar in place with contact glue without touching the other surface is a challenge in itself.

Thanks for all of that, but could you just confirm please. The foam foot sponge, which side of the plate does it go please? Is it in contact with my feet, or on the other side? Thanks :)

@snappyinc6297

3 жыл бұрын

Contacts your feet

I've found my Machno being less of an ass to carry if I do it tail first. But cannot agree on the light weight. A prijon is like a fart in weight.

On the knee padding, do you stick it on vertically or horizontally? I like the idea of using multiple layers there too thanks! My knees are killing me.

Hey there, I'm quite new to kayaking. I got myself a pyranha machno as well. I was wondering what's the difference when you have the seat in front/center/rear position? How does that affect the control over the boat? Also what's the difference between seat height positions? I still have quite poor control over my boat, so when trying different settings I can't really tell the difference they make...

@larryadams3674

3 жыл бұрын

I wish someone would answer this question regarding seat positions, I cracked my Zen and needed a boat while it was being repaired. I bought a like new but used Machno Large to paddle in meanwhile and wow! I became a paddler or (very lucky) overnight. I can maneuver this boat so much better. The seat was in the middle position and the outfitting was to my liking so I didn’t feel the need to adjust anything. I’ve paddled it about 3 months in it now. Last week for comparison, I switched boats with a friend who also has a Machno Large, but his seat is moved all the way back... and for whatever reason, his boat paddled even better for me. Granted, I haven’t taken his boat down anything other than a few class 3 drops etc. I’m wondering what is the downside or the trade off to moving my seat back that far? I know “something” has to give? Where will it come back to bite me by slamming the seat back in my Machno Large? I’m 5’10” 210lbs. but it’s an athletic build. (if that matters).... Could someone help me understand this?

@MacNE28

2 жыл бұрын

@@larryadams3674 I have always found that the further back you have your seat it'll allow the bow of your kayak to ride slightly higher out of the water and your stern will sit slightly lower. This'll make it better for carrying your speed over waves and carving across into eddy's etc. The downside - your stern will sit slightly lower in the water and more likely to catch in any holes. I generally paddle a Machno in the middle position unless I'm paddling anything with big waves that I need to carry my speed over rather than plugging the bow when it's further forward. Tbh though, there's so much volume in a Machno I feel it's generally irrelevant of the seat position other than for taller paddlers who need more leg room.

not clear about kneepads and intended use of the foam for that. In addition, there is plenty of room on the side of the thigh behind the fabric pad on the thigh hook, do you fill that with some padding too?. I noticed that pyranha offers 'hooker" extensions to the thigh hooks for 69pounds for a couple of pieces of HDPE, what are your thoughts on that? I just bought a new ripper and the question how to glue those knee pads just puzzled me for a week. I don't like gluing it incorrectly and then make corrective actions. I am pretty sure that creators had some intended use for the foams that should have been in a manual, should not it? As well, you mentioned heel blocks, I could not find much interesting on that in the pyranha blog and you did not post the link that you promised. I love watching your videos!

Just bought a ripper. Why do you like to have the seat in all the way back? What does it change?

@Senders

4 жыл бұрын

Easier to lift the nose and easier to get it vertical. Each to their own tho

Dude. I’m 92kg, would you recommend size ‘M or L Machno for river running fast alpine ditches grade 3/4.

@natankayak5554

5 жыл бұрын

Adventures of Pete definately L

What about air bags?

Hey where do you get the outfitting kit from

@Senders

4 жыл бұрын

It comes standard with all new pyranha kayaks, I think it is also available on their website.

Thanks for the video. I just purchased a Ripper, which I loved the handling of, but is hurting me on the thigh brace. They give me dead legs within minutes on the water because of the back bit of plastic on the brace digging into my thigh. I don't really have abnormally thick legs, pretty normal athletic build. I have dropped my seat as low as possible, padded them out, and moved the braces super far forward, even drilling out an extra hole to squeeze out some room. But, the problem still persists some. Any tips? My next move is to go after the offending bits of plastic with a dremel and hope it doesn't compromise the strength. Your hand is kinda over the offending bit of plastic at 5:13

@PyranhaKayaks

4 жыл бұрын

What size Ripper do you have, Ian?

@0newheelfreeheel

10 ай бұрын

Curious about this, my gf has the same problem in a medium ripper (OG version)@@PyranhaKayaks

what size is this kayak pls thanks

@PyranhaKayaks

4 жыл бұрын

That'd be a Medium Machno :)

Quick tip for outfitting your Pyranha Kayak.. Retrofit Dagger Outfitting

Thanks so much I just got a ripper and was wondering what some of the stuff did. Also, below the first grab handle on the bow there is a little place for a screw to go. What is it for?

@richardhorwath7210

5 жыл бұрын

Camera mount

@elidowler167

5 жыл бұрын

Do you know where I can buy the piece to fix that?

@richardhorwath7210

5 жыл бұрын

I mean... it isnt broken haha. The hole doesn't go through to the inside of the boat. Its just there as a mount point for cameras, you dont have to do anything to it.

@elidowler167

5 жыл бұрын

Nah like the camera attachment 😂

@richardhorwath7210

5 жыл бұрын

@@elidowler167 haha depends on the cam i guess. Amazon would be a safe bet.

Pyranha makes great boats.... Outfitting always sucks. Starting at the backband. You'd think they would offer an IR band as a stock option.

What size is that? What weight are you?

@Senders

4 жыл бұрын

Medium Machno. I am 75kg

So much loose floppy outfitting these days, I still prefer custom shaped foam that is glued to the boat and actually fits your body not a bunch of floppy shims to try and make you fit in the boat that you will eventually loose.

I really like Pyrahna boats but the outfitting is lacking in comparison to industry leaders like Dagger. The leg lifters in the Dagger outfitting is next level modern outfitting. I wish Pyrahna would modernize their outfitting to go with their progressive boat designs,

@Senders

5 жыл бұрын

Thanks forsharing your thoughts, there are two sides to the story mate. Yes the dagger outfitting is adjustable but it makes their kayaks markedly heavier than ours. One of my biggest wants from a kayak is for it to be light, I will take outfitting that is not quite as "adjustable" to save 3kg any day. Also it's interesting that you like the leg lifter so much! I always found that lifting my legs up would cause me to tip back on the seat and slouch more. I personally do the reverse and lift the back of the seat up to tilt me forwards into a naturally more aggressive position. I agree with you though, new Pyranha outfitting would be really nice. Hopefully soon!

@cloudburst1215

5 жыл бұрын

@@Senders Hi I have always thought about lifting the back of the seat up as well! How do you do it in your kayaks?

@cloudburst1215

5 жыл бұрын

I used a foam shim and folded it in half then tucked it in the way you showed in the video, but toward the back. Love the new more forward position. Is this what you have been doing?

@dgrfsthrgsergwrtghasefq

5 жыл бұрын

Chris Clark, Buy a piece of foam block, sand it to shape and glue it in, it's not rocket science. All Daggers "next level outfitting" (as you put it) is only making the boat heavier and more junk to break and loose.

You call that padding? Looked like you had a seizure. Lol

@travis4308

5 жыл бұрын

Thanks for the video, was really good btw.

Their backband sucks big time!

Why does everybody have to try talking like American millenials these days?. "Super", "stoked", "super stoked".......it sooooooooper sucks yo.