Those turned out pretty cool looking.

@GuysShop

7 жыл бұрын

Hey Brian! I am pretty pleased with the look.

That's some really cool hinges! Great explanation of how it all works Guy!

@GuysShop

7 жыл бұрын

Thanks Donny!

First time I saw things like this!! Is a great tool!!

@GuysShop

7 жыл бұрын

It's an awesome thing!

That is one smooth system there, Guy.

@GuysShop

7 жыл бұрын

Thanks Steve!

Awesome video. I knew the Ibox part, Had heard of the HingeCrafter, but never seen it used. Tell Incra they owe you a sales commision. Informative video, thanks for that. Have a good Memorial Day, and God bless our troops, then, and now.

Nice way to make a hinge! Great job Guy!

@GuysShop

7 жыл бұрын

Thanks Brian! It is a lot easier than I make it look :)

Thank you. Been trying to make hinges for semi-trailer doors , this will do it.

@GuysShop

7 жыл бұрын

Hey Fred! Thanks, and I hope it works out for you!

Very informative and well done. Thinking about getting an ibox . Also subscribed

Now that's a fancy box joint jig.

Cool video Guy ! I like these wooden hinges !

@GuysShop

7 жыл бұрын

Thanks! They came out pretty nice.

It is a beautiful product with beautiful results. Loved the video demo and I sincerely hope and pray that someday I would be able to afford this Jig:) thank you Sir!

@GuysShop

7 жыл бұрын

Thanks for watching!

Really cool work man, these hinges will be a great dressing to your furniture. Nice video, Guy!

@GuysShop

7 жыл бұрын

Thanks Roman!

Guy, your channel is like a higher quality New Yankee workshop. And I mean that with no disrespect to Norm, just that your skill combined with the modern technology available today makes for an even more enjoyable watch.

@GuysShop

7 жыл бұрын

Wow. That's a very humbling statement brother. Being mentioned in the same sentence as Norm... Thanks!

@KSFWG

7 жыл бұрын

The New Hoosier Workshop! :)

@jeffward8398

6 жыл бұрын

locohombre79 ii

@cballantyne1534

6 жыл бұрын

Thanks

@markbeiser

5 жыл бұрын

I agree, and the best part is, even as a newbie woodworker, I come away from a video confident that I could spend $225 for the two jigs, and be doing this to an acceptable standard in a few days, thanks to technology! Most of these guys, especially the hand tool only woodworkers, and it is a little depressing knowing I'll never get to the skill level to do those things in the 4 or 5 hours a week I have to tinker with wood. :(

That ibox looks sweet!

@GuysShop

7 жыл бұрын

It is an incredibly easy jig to use. It takes an hour or two to calibrate it properly, but once that's done, you never have to do it again.

HOLY SMOKE! I just bought the Ibox and hinge setup! Your timing couldn't be better! Thanks Guy, good vid.... (and PS, I'm likin my shirt. : >)

@GuysShop

7 жыл бұрын

HaHa. Glad I'm able to give a little insight into the process for you. The instructions are so damn top notch with Incra's products and really walk you through the process of using their products.

@GuysShop

7 жыл бұрын

And thanks for buying a shirt too :)

Ótima orientação. Parabéns!

@GuysShop

7 жыл бұрын

Obrigado pelo elogio e observação!

Interesting. Cool video Guy ! Thanks.

@GuysShop

7 жыл бұрын

Thanks buddy!

Very neat idea!!👍👍👍

@GuysShop

7 жыл бұрын

Thanks Bob!

Oh, a blade guard... that's what that plastic thingy was for. I got rid of that sucker that day I got it ;) Great video Guy. It is funny about that jig. If you don't use it for a while, you have to go watch a video to remember how to use it. Thanks Guy.

@GuysShop

7 жыл бұрын

HaHa. Yeah, the blade guard. I actually found it pretty useful for also helping align the pieces in the jig.

Great job Guy! Well presented, excellent video quality and an obvious level of expertise.

Thank yousir, this is a nice video everybody should watch, you got yourself a new suscriber. :D

@GuysShop

7 жыл бұрын

Thanks Emmanuel! Welcome to the channel!

You've got some of the coolest tools, Guy! 😊 Those hinges are awesome. A bit large but gorgeous, nonetheless. They can make quite a statement!

@GuysShop

7 жыл бұрын

HaHa. Cool tools are my thing :) I can see myself using thes hinges in a lot of different projects. They are a little larger than an iron or brass hinge. However since they are wood, they tie into the project better.

@MadWilly66

7 жыл бұрын

GuysWoodshop Agreed....they are very cool!! And those​ Incra tools make it look super easy to make.

Hola amigo . Exelente herramienta boy a comprarla pero me puede ayudar con estas preguntas, 1 la herramienta de incra llega con la broca para la perfiracion y q grosor es la broca . 2 el diametro de circulo de la bisagra. 3 llega con la fresa de router o como la pido . Gracias

Very cool

@GuysShop

7 жыл бұрын

Thanks Mike!

Great video Guy. I'm making a cross cut sled for my router today for cutting the bullnoses, I don't have a box joint jig, but plan to use my Incra Jig and right angle fixture to make the box cuts. (I suppose it might be easier inserting and releasing the hinge pin if you use a little Carnauba, or beeswax on it, also between the hinge knuckles before final assy).

@GuysShop

3 жыл бұрын

Good luck!

Hi nice to look at just keep them away of moist atmosphere as the wood can expand and tighten up.

thats really cool guy! bet youll make some awesome stuff with this in the future🖒🖒🍻

@GuysShop

7 жыл бұрын

Thanks for watching Joe! I hope so!

Great job. Love the step-by-step directions. I already have the I-Box jig, just need to get the Hingecrafter now.

@GuysShop

7 жыл бұрын

Thanks Shane!

Really cool Guy!

@GuysShop

7 жыл бұрын

Thanks Fred!

That's an awesome setup. Great presentation! What's the brand of that ratcheting clamp? They look handy.

@GuysShop

7 жыл бұрын

Thanks Sean! They are Bessey clamps. Forget what they are called. Bought them from amazon several years ago. Very handy.

very good

I'm impressed with your video sir. Thank you for sharing this...

@GuysShop

7 жыл бұрын

Thanks for watching!

Nice

Just picked up the iBox and hinge crafter this week. neat tools. Thank you for the video.

nice demo guy,

@GuysShop

7 жыл бұрын

Thanks Scott!

what brand table saw is you are using?

hi Guy, great video. could you explain why the need to use end grain over long grain

@gsp911

3 жыл бұрын

It will have no strength if you use long grain side. It will crack right away.

How do you account for wood movement?

Is it a beading router bit or a bullnose?

Very nice

@GuysShop

7 жыл бұрын

Thanks Richard!

kerja yang sangat bagus pak..

@GuysShop

7 жыл бұрын

Terima kasih banyak

What brand or make is the push block he is using?

Guy, like you I am a BIG fan of Incra precision. I own the LS Positioner and the Hingecrafter. Do you find an appreciable value in time and precision when using the I-Box to cut box joints over the LS Positioner on the router table? Jim

@GuysShop

7 жыл бұрын

Thanks Jim. To be honest with you, this is the first project I have ever used box joints on. I really like the I Box, and it was easy as heck to make the box joints with. Knowing what I know about the LS positioner, I don't see one being easier over the other.

@jhelminski

7 жыл бұрын

Thanks Guy, I was trying to convince myself I didn't need the I-Box since I have the LS but like any addict I eventually give in to my addiction.

Can I use the Incra "Wonder Fence" attachment using the router attachment on Incra TS LS 32 to do what the I-Box does?

@GuysShop

7 жыл бұрын

Yes if you have the router table in the wing of the saw.

Great video. Dont know how a guy could demonstrate any better than this.

@GuysShop

7 жыл бұрын

Thanks Ted! It sounds like you guys are all set up for the meet up in Oklahoma. Still trying to decide if I'm going to go out there or not.

@TedAlexander24

7 жыл бұрын

It would be cool if you could make the trip Guy. Should be a lot of people from the community joining in.

Can you make a box with the Hinge being the actual top lid without making it into a separate hinge that needs to be glued on top? Possibly by leaving the leaf long enough to cover the box?

Do the hinges sqeek. I would love to make full length for man doors, I know drilling holes is limited to 6" but I've seen other ways to get hole down threw there

@GuysShop

5 жыл бұрын

Not they have seen. Or heard for that matter....

Thanks for the video. One question...how do you attach the hinge to the box?

@GuysShop

3 жыл бұрын

Typically I just glue them in place

Great video! What kind of clamp are you using? Or where can I find one?

@GuysShop

5 жыл бұрын

That is a Bessey Klick Clamp

@caseysimon3062

5 жыл бұрын

@@GuysShop Thank you!

If you enjoy woodworking plans, you will love stodoys . Get inspired by all the endless possibilities of furniture plans and other wood projects to build, for both indoors and outdoors.

That is pretty amazing. But I don't have the patience.

@GuysShop

7 жыл бұрын

Thanks Max! Very easy process, and I can knock out a set of these in aboout an hour. The first time took a little longer, but now that I have done it 4 or 5 times, it goes pretty quick

@Belg1970

5 жыл бұрын

@@GuysShop How long did it take the first time? Very nicely thought out process and video presentation.

Great system you got here Guy! I just have one burning question...why is your blade guard removed? 😋

@SimopsAus

7 жыл бұрын

Wayne Welshans if re watch you will see that it says that the guard was removed for video clarity....

@GuysShop

7 жыл бұрын

HaHa. Thanks!

@GuysShop

7 жыл бұрын

And visual clarity is important, right :)

Is there a reason why you use a table saw instead of a router with the jig? Frankly, I have the I box but I never liked it. The ibox requires moving the wood and reclamping for each cut vs clamping once and moving the clamped unit of work to the next position.

@GuysShop

7 жыл бұрын

I just felt it was easier to do it that way. This was my first time making box joints, and found the iBox very easy to use once set up. I really can't compare it to any other method or jig.

Cool products. You should turn down the volume on your clips w power tools btw the audio is way off

What make is the router bit? Thanks

@GuysShop

6 жыл бұрын

All the bits used are Whiteside

@OrangeismyNewGreen

6 жыл бұрын

Thanks

What’s Your name again ?? Me. Incra ?👍🏼

BTW -- I still love the 41 negative comments. Really folks, give me a break.

hi Guy, I would like to start out saying that i look forward to any and all videos you put out. with that being said; What the frig dude? WOW!! way too long, Im sure that you could have gotten away with some of those step's... lol no disrespect but i had to hit the snooze button on that one. I'm hoping you win me over on your next installment. lol I can guarantee you that 95% of woodworkers will never make those. and the fact that you used 15k in tools to make some wooden hinges is kinda sad. sorry guy, just missed me this time i guess.

@GuysShop

7 жыл бұрын

Thanks for the input Christine. I do appreciate the honesty in your comments!

@tomx63

6 жыл бұрын

In reviewing the thumbs up/down, roughly and maybe ironically, "95%" of the people who voted liked this video. I can't help but wonder how your 95% guarantee was calculated as it sounds arbitrary and baseless. Like my great grandpa liked to say: you snooze, you lose.

@vernonbritton5990

6 жыл бұрын

I can see trying hinges "built into" my next box. Thanks for the demo. Each of your new videos is looked forward to.

@gregory6529

Жыл бұрын

Have made several after watching this video, it adds a little personal touch to the boxes I make. Yes, the the Hingecrafter is a tad bit expensive but ANY HOBBIE has its cost. I bought the I-Box first and learned how to use it until I felt comfortable with it to make beautiful finger joint boxes and used ugly store bought hinges. I watched this video and thought i could do the same thing and add little "WOW" factor to my custom made boxes (Not to mention add a few extra dollars to the cost). Customers love them, I enjoy making them so the cost is mute to me. Fine craftsman ship isn't just a hobby, its a labor of love. Like the modified sign says, "Fine Woodworking labor is beautiful BUT isn't cheap --- and cheap woodworking labor isn't beautiful." I take pride in what I make and sale. Thanks for the WONDERFUL Video.