*Support What We Do at The Katz-Moses Store-* bit.ly/KMWstore20 *Katz-Moses Goo-* kzread.info/dash/bejne/iJ2q1MSMe7Hfmrw.html *Table Saw Blades Video-* kzread.info/dash/bejne/eJeuwcZqm8LRaKQ.html *3D End Grain Cutting Board-* kzread.info/dash/bejne/eXuIypSIZdTWgdI.html *Bits and Bits router bits: **bit.ly/BitsBits** USE CODE JKATZMOSES15 for 15% off* Part #s Used: ½” Astra Coated Ball Nose Bit for Handles: ⅛ Astra Coated Roundover W-2000C *Tamar 3x3's new crosscut sled* kzread.info/dash/bejne/f5eMrNqSfLvXXag.html

@dylanwoodworking483

4 жыл бұрын

Jonathan Katz-Moses what was the size of board you used to make the cutting boards

@seasawwoodworking

3 жыл бұрын

I love your dovetail jig. I’m currently waiting for your dovetail square jig and I cannot wait to use it once it comes in! Thanks for your videos!

As a wise man once said, "You know who has end grain cutting boards? Woodworkers and their families." xD

Great book for a beginner . kzread.infoUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ this book really starts from the beginning, as in it explains what basic tools are and how to use them. But when it gets to the art of creating joints and how and when to use them this book really starts to teach you something. At least that was my experience.

Quick tip for you to make the endgrain pattern just a bit more interesting. On one strip at the end, make it half the width of the rest. Flip them end to end for the second glue-up and you have a neat brick pattern.

OMG. Up till now i thought cleaning glue off was for the blades health BUT wow, its actually it will tilt your board through the planner. THNX, it just only took hundreds of vids for me to land on this gem 😁

Thanks for the shout out! Love the Stop!

@katzmosestools

4 жыл бұрын

Of course Tamar! You're the best!

@davidnorton9997

3 жыл бұрын

This is what I love about the woodworking community. Mutual respect and camaraderie. And giving credit where credit is due. Y'all are awesome.

" If anything starts to rise, give it a good whack,..... Gentlemen" 😂💀

@jamcastillo01

4 жыл бұрын

@@MJ-nb1qn R.I.P.

@edgerat

4 жыл бұрын

ALSO, DON'T BE AFRAID OF YOUR PENCIL!

Thousands of end-grain cutting board videos floating around on KZread and I’ve probably watched far more than my fair share of them but this was truly the best I’ve seen. Haven’t made one in awhile but when I can finally get back to normal life, definitely going to have to rack a few of those up to sell! Thanks for the video.

Me @ 6:51 "Ahh, he's got a Craftsman Handheld Belt Sander! That wasn't a dumb impulse purchase on my part!" Me @ 8:34 "Awww dammit"

Shoutout to the guy heckling you on Instagram and you just fired a “👍” at him 😂😂😂 legendary move. Keep up the great work!!

Thank you for putting this video up and actively encouraging people to use this to earn money. This will be the first project I make to sell.

I use a cutting board almost everyday for vegetables so when I saw this video I thought to myself “I’ve got to make one of these”! Thanks for ALL the great videos Jonathan.

I consider myself an expert in using a belt sander. Been using a good one for 50 years. But I just got a Bosch 6 inch geared orbital sander with turbo mode. Made 4 end grain cutting boards with hard maple and walnut. After the last glue up, did all of the sanding with it. Started at 60 or 80 grit. Worked fantastic. Will probably never use the belt sander again. Thanks for all of the great videos that you do. Keep it up.

I’ve been thinking of easy Christmas gifts to make. I had no idea endgrain cutting boards went for so much. I just thought it was an aesthetics thing. Another awesome video. You’re a cool Kat(z)!

Hey John! I really appreciate the helpful videos you've been putting out. I've been wanting to get into woodworking as a side business and I'm finally taking the plunge after making some boards, wooden utensils, and refurbished furniture. I was snarky about your moxon vice video when it came out, bemoaning the use of specialized tools, and have since realized how ignorant I was when I did my first real panel glue up. You were positive in your response and it was that positivity (and video quality) that brought me back. I wish you the best and hope you remain well! Thank you for your knowledge and content.

My daughter and I bought some beeswax and mineral oil and made some "Goo" last week. I love it! So much easier to use than the Lowe's block conditioner. ***General rule of thumb... don't buy anything Craftsman that has an electrical cord attached.

Thank you so much for this video, I have made some boards before watching this and it’s nice to learn what I did wrong👍

Another great teaching video, like how you explain to the beginner and advanced maker, like going over sanding rather than just throwing it in the drum sander. I think the reason the belt sander died is that it hates sanding end grain too. Can't wait to see the clamping video to see how you clamp up your "Big Boy"!

People out here binge watching Netflix meanwhile I'm binge watching JKM, I can't get enough!!!! I can't wait to apply some of these techniques in my shop!

@roberthahn8555

4 жыл бұрын

Andrei Rînea you really don’t 😜

@austinpyles2174

4 жыл бұрын

That hit close to home 😂

That is one beast of a cutting board. Great info, thanks.

Thanks for the tip about using pencil marks for even sanding!

Love your channel. I am just getting started in woodworking and can't wait to try these. I just noticed the Ron Swanson stencil on your cabinet...LOVE IT!

I recently finished a new maple cutting board (3/4" thick) to replace the old one that was badly warped. I slathered it with mineral oil a couple of times to make sure it was well conditioned. I'll definitely try out pipe clamps, as using the F-clamp was a little challenging to keep it completely flat while gluing up.

They look awesome. Thanks for posting.

Another great video. Thank you for sharing. Take care and be safe

Can't wait for the clamp video! I have pipe clamps but don't want to get stuff that I won't use and I do need more...lots more..!! haha

can't wait for the furniture builds.

Awesome work Jonathan! 😃👍🏻👊🏻

Just bought a saw and jig from your store to support your channel. Thanks for all you do!

@katzmosestools

4 жыл бұрын

Truly appreciated 🙏

Beautiful job, dude! The boards look fantastic! 😃 Stay safe there! 🖖😊

Great video. This is a project that I mistakenly thought would be easy, but you’ve given some great tips and tricks and proven me wrong. Definitely giving this a try at some point, but I only have hand tools, so this should be fun, especially using my no.62 and sand paper 😣 Also, I’d like to put a hand up for the clamp video you mentioned you may do. Again, it’s something that seems so simple, but having looked into it, there’s a hell of a lot of choice. I’d also like to know why, how and where to put them during glue ups. Cheers 👍

I have a surface planer but I bought the WEN 4 3/8th electric hand planer and it is incredible for this. It is so much easier then the router with a jig.

Don’t get a craftsman!!! Great comment..Thanks for the video, will be making one of these soon

I've been watching your stuff for a while man but rarely comment. Great video man and awesome explanation of these boards. Just stated my woodworking business last year and cutting boards have been my bread and butter and allowed me to outfit my shop.

@garrettjones8017

3 жыл бұрын

That's awesome man. I'm just getting into it your comment is inspiring!

Those looks great. Nice video and great tips.

Kitchen looks really nice

Your baby is so adorable!

When I had my woodworking business, end grain cutting boards just weren’t worth the extra time versus edge grain. Most customers I found were perfectly happy with edge grain, especially given that end grain costs more in labor. YMMV. Hope y’all can make money on em.

@theenderface7379

4 жыл бұрын

I sell a lot more edge grain than end grain cutting boards. Most people don't care to spend the extra money on them these days.

@TheOutdoorEthos

4 жыл бұрын

I've found the same thing. I'm a year into my woodworking business and my first ever few sales were end grain but they quickly stopped moving. Now I sell a couple of edge grain a week and my customers aren't the slightest bit interested in the spending the extra money nor me on spending the extra time on doing end grain. That said, all my my personal boards are end grain and obviously I'll still make and sell one by request.

@MaydaysCustomWoodworks

4 жыл бұрын

It's true. The weight and price really turn a lot of people off. They are still amazing. But the weight and price are the restricting factors usually

@slavek033

4 жыл бұрын

Justin Bailey any chance I could ask you few questions over the email?

Those are so cool👍

I bought some CMT blades through your video when you just made it on the first day. I used it today for the first time and now I'm hitting myself for not putting that thing in when I first bought it.

cool video no bs straight to the point. Thanks

nice. cant wait to see the new furniture videos

Que bela peça uma verdadeira obra de arte 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷

Hell yeah! A woodworking channel with a good taste in Music! Subscribed! Nice board too!

i tumbled in to your channel long ago. and ever since what i like about you is the tips on all the small small aspects of wood work, even down to which pencil to use and why not. it saves a lot of frustration for people like me who dont have access to a college or a paid teacher. And your baby is cu....te xoxoxo

This is the first video I've seen you make. I picked it because I have some Zebra that I want to use for end grain. Nice job!!! You're informative, have excellent video and editing skills and control over the background music volume. I've done a few videos and I appreciate the care you take. Now on the the "Goo" video.

I had the same problem with my planner, polished up the base plate with some wax and presto! works again like it should.

Titebond three will not go rancid over time and that's another reason for using it plus it's an awesome glue! I enjoyed your video.

Looks great buddy

I make end- grain boards, and in my experience the titebond 3 is hard as hell when it dries. The hardened glue makes the planing, sanding, and finishing a bit more difficult. The titebond 2 is more than sufficient for a board, since you're not ever going to submerge the finished product.

Very nice. I scored some oak out of office furniture my work was throwing away, and will make an end grain cutting board from it.

Looking forward to the clamp video

Yes! Clamp video please!

I seriously dislike end grain cutting boards. However if they sell well I will most definitely learn to love them.

Hey brother. I make a lot of end grain boards. Likely on your planer on the bottom rollers the edge of the wood was getting caught on that lip. That's what happens on mine. I actually take a ROS with 80g on it and put a 10 degree bevel super quick on the edges of the board to stop that when it's rough. Also you can do the same thing when it's turned end grain to stop tear out through a planer

Put one of those CMT blades on my miter saw, worth every penny!

lookin slim!!

You're such a cool dude. I wish I could afford WBC just to meet folks like you. I don't even make content.

Man just realized I somehow was unsubscribed! Well I corrected that mistake. I’m a newer woodworker and just did my first edge grain cutting board. Going to dip my toes in an end grain cutting board this weekend! Great video as always!!

Tung oil is your friend too, mineral oil is a never-ending prison since it washes off so easy.

So why did you hand sand when the drum sander was right behind you? Second question do you mill the stock prior to cutting in strips? Thank you for the great tutorial.

Hickory will tell the tale on your blades as well. I run a cabinet shop. We have to resharpen everything after one set of hickory cabinets. Sometimes I even have to have spare bits around for the shapers before we get even halfway through milling the door stiles and rails.

@katzmosestools

4 жыл бұрын

Yeah Jay Bates uses a lot hickory and says the same

@retiredrookie7146

4 жыл бұрын

@@katzmosestools its brutal man. But, using a clear finish, it turns out beautiful.

Lovely. I think I have my Christmas gifts for 2020.

@kieranfoster902

4 жыл бұрын

Getting Maple isn't that easy in my part of the UK. Is there a food safe alternative wood?

@steveandrewsmith

4 жыл бұрын

@@kieranfoster902 There are really only a few that are not safe to use. Many use Cherry and Walnut. www.woodworkersjournal.com/woods-avoid-making-cutting-boards/

Wow I would have expected more of a Craftsman belt sander my Harbor Freight one was probably cheeper and I sanded a coffee table top flat which took hours and it still works.

Awesome video, with great pointers! Thank you! Quick question,... should I take this on if I don’t have a planer?

Thank you so much for the video! Any tips on how to best pull this off with an electric hand planer (rather than bench top) and a circ saw (rather than miter)?

Hi Jonathan, can you explain the reason why you tape the boards up (after the orbital, before you trim them down on the table saw) around 8:48? Thank you in advance.

having a sacrificial edge glued to the sides, should enable your cutting board to go through your thicknesser, with no damage to the important bits. I've seen this done on youtube & tried it once, successfully. I also make reversable CB's. And always place 2 feet on the edge.

Thanks for this step by step guide! Gives me confidence to try one in my own shop. Question: What is the purpose of the tape when sizing on the table saw? For tear out?

@OutdoorsEngineer

Жыл бұрын

My guess is to protect the newly sanded surface?

Just curious what the blue tape was for that you laid across the seems before trimming the board down was for. Haven't been wood with wood in 20 years and have decided to start my own little shop. Used to do cabinetry.

haha! was wonderng why you used so much glue for the first glue up but then you tipped all the extra off the edge of the board and it was pretty satisfying.

Professional chef tip... take two pieces of paper towel get them wet and squeeze out extra water. Put those under your board and it won’t slide around. I won’t use a board without wet towel under it. Then you don’t need feet on the little board and you can use both sides. Great video and good looking boards.

@katzmosestools

4 жыл бұрын

Great tip! Thank you! I'll use that at home

Great video on end grain boards. I make edge grain boards but will attempt an end grain. Can an end grain board go through a planner or do the have to be sanded?

Must be nice to have a thickness planer. I did that step with a hand plane.

That goddamnit is very relatable! Haha

freaked me out when you hit the planer

great video, my biggest problem is that most people don't want to spend the money on these quality boards. They rather go get a cheap one from Walmart or wherever else. They don't understand that this hardwood would last them for years to come, and all they have to is apply vegetable oil once a year. Here at the Northeast, these hardwoods are harder to find. Getting a 8' 8/4 Walnut is almost $100 for one piece, so it's frustrating to even get some since the demand isn't high on these. By the way, a great oil and finish wax to use is a brand called "Walrus oil". It's not expensive and you only apply it once and yuou're all set. Thanks for the video. Cheers :)

Love the boards, but how am I just now noticing Ron Swanson on your cabinet door??!! Awesome! Now just grow a stache to match! Lol

Using the Makita RT0700 for the edges only, would you think it could handle more serious routing like the handles? Thinking about getting one as my first router, wondering about it being somewhat future proof if it only can do edges powerwise?

I see Christmas Gifts in my future.

I was thinking to myself. Craftsman belt sander, I'll have to look in to that. Then, Jonathan's 3 second reviews hit. 🤣

@maddog1918

4 жыл бұрын

I bought one when I was short on cash but needed one. they are good for crap you just want to knock down before you use a real sander

$42 worth of wood? I really wish I had those prices here. That would would cost well over $100, maybe even $150 here. With that being said, loving the channel. Keep up the good work.

i just did my first "big" board, 24 by 16 by 1 1/2. i flattened the final glueup with my new v-drum sander from stockroom supply in ontario, canada. i wont say that flattening was a breeze but waaaaaay better than a belt sander. i'll post a link to my machine on fb if you are interested. if get a chance i'll shoot a video and post it on my channel

Master craftsman, master chef. Respect the Shun knives. I damn near cut the tip of my thumb off drying mine the first time. It cut through the towel I was using. Would planing the board with a low-angle jack plane not be faster, like shooting endgrain? I just abhor sanding.

thank you cool Katz . so craftsman not what it was in the 70'S ? good idea endgrain never thought about blunting the edge figured it was part of life hum . so chalk not a good choice either for marking either ? if you do not mind all those bags from the grocery store make great covers for your clamps and we generally lots of em to work with .

Just noticed Nick Offerman in the background. What a man.

@katzmosestools

4 жыл бұрын

The manliness is palpable.

This might be a stupid question but when ripping the board into strips and doing the first glue up, and I gluing the board back together or am I gluing the face grain together having the edge grain facing up?? Thanks man great video.

I've watched a few of your videos before, and I'm just now noticing how much you sound like Patton Oswalt.

I have a question about lumber dimensions. What is a good thickness for end grain cutting boards and why do people use squares and not rectangles?

What were the strips of Blue painter's tape for during the last cut up?

Perhaps you could help me with a question. I used cherry and red oak for my end grain board. When oiling, the red Oak wicks the oil from the top to the bottom in a matter of seconds, right through the thickness of the cutting board. Will this stop after several oil treatments? (3 so far) Will it affect the use of the cutting board? Thank you for any help or info.

"Upcoming clamp video" lay that Taylor Toolworks promocode on me dawg. Those new Taylor clamps are good nice.

@katzmosestools

4 жыл бұрын

Their parallel clamps are SO NICE! They can actually move back and forth easy. There's a lever on them that actually works. Unlike any parallel clamps I've used before.

Just ordered the DOZUKI saw to go with my dovetail jig, looking forward to cutting my first dovetails soon. P.s. for all you Europeans, CMT blades cost about as much as the diablos.

Cool video. What's the blue tape for? After you sanded, you added strips of tape. Thanks!

Regarding the glue: Titebond 3 is also food safe (don't eat it though! It only means it's safe to contact with the food) You can also use planer to help with the final leveling, so you'll sand only as part of the finishing process. But you have to shave it off little by little and glue some sacrificial boards on the short ends, because without them planer will tear this endgrain out like it's getting paid for doing that. And as for the feet - they help not only for moving, but for keeping the board away from the extra moisture on the tabletop and during drying, so consider this if you're planning to build one.

@joelwinter4956

4 жыл бұрын

Maybe better done if you have a helical cutter on your planer--otherwise doing the final leveling on the planer can be pretty tough to get right (as you point out--*little* by little!). Sanding is far safer (for you, and the cutting board!).

@kevinboas6607

4 жыл бұрын

Running end grain through my planer dulls the knife immediately it seems

@TheUncleLem

4 жыл бұрын

@@kevinboas6607 I'm going about ¼-⅓ millimetre per pass, and I didn't notice it. But I haven't done it too much, so maybe that's why the blade wasn't damaged.

They look really good! I just think that what you said about sanding was not quite right - if you use pencil, the parts where the pencil remains must be the LOW areas - so, you need to sand the WHOLE area down to those low parts. Yes??

Great video! How long was the board of maple you used to make those boards? Thanks.

Is there a end grain cutting board program. I have used one but don’t know how to make it work for horizontal strips instead and of vertical.

Hi, I made an end grain style only maple cutting board by watching a video of him explaining each step. I gave a coat of Vaseline oil as synthetic one is not available from us. At the first wash only on the used side, everything is on board ... What advice do you give me? Thanks Nicola

Stupid question but something I struggle with on these cutting boards, I usually round the 'face edges' with a 1/8" roundover bit but 4 'small' edge edges that are left, how do you round them over easily? I've just stuck to using sand paper and rolling them over.