Thank you thank you...I needed to see how to disassemble the switch so as to tighten the loose throttle tube. As an aside, I have been successful cleaning the start switch by spraying contact cleaner in the gaps beside the switch and rocking the switch back and forth until it freed up! Thanks again!!

Brillant tutorial... Thank you Rocks n Roads Adventure:) Brilliant work

Best video ever ! Solved the problem with 20 bucks !

Very instructive video..keep doing it...great channel..

This worked great on my 2017 sticky starter, thanks for the great video

Excellent. Very helpful! Thanks man.

Great movie, I think the only one showing how to disassemble the combination switch. Tip, alway check and/or tighten the throttle grip bolt!

Loved it !👍🏽👍🏽

Great video. Be good to see one for the other side as well🙏

i learned a lottt, love the step by step !!

@rocksnroadsadventure4247

4 жыл бұрын

Glad it was helpful👍👍

It’s actually a T9. Great video.

I found this video really helpful, my starter switch was stuck as well and i follow step by step your video. Thanks a lot. I would like to know if you have something similar for left controller of the handle bar. Unfortunately sun light burn and damage color of the switch and i want to chat it. Please let me know. Thanks, from Italy

So helpful! I just bought a 2015 rt and the switches all work but are really faded, so im going to replace with some fresher ones. Cheers!

Great video. Did not see the part when to lubricate the switch you talked about. Just WD all over the parts?

great video! what did you use for cleaning the switches?

Thx a lot. Please can you make the left side because I have stuck in menu button

how did you clean the assembly? only by WD-40?

for the left side is the same?

Hello, I was wondering if the motorcycle will require clearing error codes if I ordered and replaced this part myself. Do you have any experience to share?

@rocksnroadsadventure4247

3 жыл бұрын

As far as I know Not required. Do you have GS 911 for code read?

@normanlai

3 жыл бұрын

@@rocksnroadsadventure4247 no I do not have any odb reader. Thanks for the reply though!

Just a heads up, wd 40 will destroy certain plastics

I need the same video for the left one, do you have it?

@rocksnroadsadventure4247

3 жыл бұрын

Sorry I don't.

You say "t 80 " but im thinking you must mean t8?

T8 o T9? Thank.

@davidcalvofernan3703

Жыл бұрын

Confirm T9

Hello everybody. I would like to share with you my solution to the problem of the kill switch button being difficult to press. Just as shown in the video the white tab with the spring is the problem. However, it is not necessary to remove it completely. The real problem is that the spring is a little too long and makes the tab move less easily. I simply cut off a small piece of the spring at one end and then lubricated it with white grease. You really have to start cutting a very small end of the spring (a first stitch) and adjust as needed. Now my button works great with no loose.

@piyabudmakaraphan7191

Жыл бұрын

Agree, just too long spring. 2-3 rolls cut off