Regarding some comments I am seeing (my $.02): If there is bad feeling going on here, I am not picking up on it. I have lately been enjoying watching Quinn go through this journey and then see Joe’s more experienced methods for solving the same operations. There are many ways to skin a cat (sorry to Quinn, as I cannot think of another analogy) and the more I see, the better. I have been watching both contributors for years and learned a lot from them. A large part of the joy of watching KZread machinists is trying to figure out how I would do something and then see a different (usually better) solution. As a total novice, I feel smart if my guess happens to match. Funny timing though, as just this morning I decided to edit my Patreon subscriptions to support them both. I have seen this engine built by at least 6 different contributors over the years and enjoy all their videos. As far as Quinn presenting in “Tutorial” mode, for a hobbyist like myself I do consider her a “tutor” as I am sure many do. That being said, it is also nice to see how feature machining operations are solved by a professional machinist. Watch who you like to watch and stop complaining! Don’t need the drama - I could just watch the news for that!

I'm watching more than one channel do the same project. It's nice to watch this being done. Forget the comments. Just watch, and look at different people's methods. Maybe you'll have an "Aha" moment, and you'll have all of them to thank.

@joepie221

3 жыл бұрын

Options are a good thing. You pick. Like a menu. We all have different tastes.

I've been enjoying watching both channels working on this project, and it's fascinating to see the different approaches. There are so many ways to get things done, and Joe is a master. I have to say, if he were to point out better ways to do things, I'd be honored.

So great you're doing this! I'm learning a ton of information that can be applied to all kinds of different fixtures and machining. Thank you! And to me, there is no competition. Just an incredible teacher and someone learning by trial and error.

@joepie221

3 жыл бұрын

I have never lost sight of the fact I started somewhere too. One big difference is that I embraced input from the masters.

I can't tell you how pumped I am to see you machining this kit! I've had this kit for a few weeks now, but being a novice I've been a bit nervous to get started. Now I have a *trusted* source of info. Thank you thank you!!

@joepie221

3 жыл бұрын

Thats very flattering. thank you. feel free to post questions if you have any.

Joe, you explain things beautifully. This is the finest model machining video I've seen. You never insult your viewer by assuming any prior knowledge but explain things fully and simply. I've learnt more from you than from anyone else; keep them coming.

Proper checking and planning before the first chip is made is essential. That has served me well for nearly 60 years. Well done Joe!

Finally a model steam engine video from a pro. As a hobbyist myself I don't understand why people want to watch other hobbyists as a tutorial. I've never really watched BH but after this I gave her a try and it feels like she's doing it by eye almost. I hope this one gets finished, I got really into Stefans series only to find out like 4 videos in he never finished it.

Joe, Well done. There are many ways to "Skin a Cat " but I think that most model makers in the UK, would not have finished the cylinder ends on a milling machine. After boring the cylinder they would mount the cylinder on an arbor in the lathe and face the ends true to the bore. In that way you are sure that the ends are square and true to the cylinder bore. You sure took a big risk in plunging the 960 cutter straight into the casting. Luckily you have a nice soft casting, but if you had one that had been Chilled, it could have totally buggered your cutter and even had the casting move in the vice ( correct spelling for UK ) and spoilt all you other good work.

@joepie221

3 жыл бұрын

A shorter cutter would be a better choice. that cutter was dangerously long.

As a computer programmer I pay for different approaches to the same end from as many sources as possible. The fact that this is being done by several revered Tubers is essential and allows me to judge the approaches and even construct my own. I'm overjoyed for multiple perspectives. THANK YOU !

@joepie221

3 жыл бұрын

Take a little piece of everything and make your own soup.!! Thats why think tanks are so valuable.

There is nothing wrong with people or mfg's sending joe or any you tubets free things to work on, hit helps everyone, the mfg, me and my kids, other people too. As a rookie i have learned a lot from joe and other you tubers, i have a retired relative was a machinist for 40 years and he introduced me to this site, he said joe was top notch and i think he should know,

@joepie221

3 жыл бұрын

Thanks for passing that on.

That’s great Joe, Santa is bringing me a set of very similar castings to keep me occupied next year, looking forward to the rest of the series.

@joepie221

3 жыл бұрын

More in cue. Stand by.

I watch KZread machining videos to learn from people who have experience and expertise. This series is a masterclass, Joe. Thanks for taking the time to produce it. It is rich with information and a pleasure to watch.

@mchiodox69

3 жыл бұрын

Very well said!

@joepie221

3 жыл бұрын

Thank you very much.

Nice work! I'm more than a little impressed with milling a circle like that. You must be a god level etch-a-sketch artist! :)

@wildin13

3 жыл бұрын

Did you see his skill plate "thing" he made to test manual skills? I think there's a video of his CNC milling it. Either way I think he's had plenty of practice doing arcs on a manual

@joepie221

3 жыл бұрын

Thanks guys. My hands do the work, I just stand back and watch.

I have watched many of these small steam engines machined on you tube but you are the first actual machinist that I am aware of. it shows in your approach and confidence in the operations . Very nice job

@joepie221

3 жыл бұрын

Thanks 👍 Stay tuned. I'll finish all of the parts.

Having machined quite a few cylinders, I have a few constructive comments to add. I always try to arrange to bore the cylinder as soon as possible. If you encounter a blow hole in the casting, the part could be scrap. This is more an issue with cast iron. Also, it much easier to have a separate steam chest. You then have better access for machining the ports. It will also allow you to fine finish the port face on a glass rubbing plate. Finally, I prefer making the cylinder covers first and subsequently spotting the tapped holes from these. I really enjoy your videos and hope you don't think me too critical.

@haroldpearson6025

3 жыл бұрын

Also the crosshead end of the cylinder should be faced at the same time the bore is made.

@willmcgo8288

3 жыл бұрын

Sort of what I was thinking about doing the cylinder early. If the bore gets screwed up, the part is scrap. Or it needs a sleeve, and a lot more work. With the bore successfully made, many dimensions can be referenced to it. But, it you're new to model engine machining, maybe doing all the other stuff first can give you practice before working up to the bore. Not that I'm suggesting Joe needs the practice, but I would. Great video, really enjoy, thanks.

As usual joe, brilliant and educational, for a newbie hobby machinist. i learn so much from your videos. I am your "70 year old apprentice" from the UK

@joepie221

3 жыл бұрын

Thank you very much!

Awesome work... distilling down the blue print to work in a logical progression of operations, and not spending all of your time re-establishing zero. Also, establishing logical start points and correcting for the casting (1.136" indicated to 1.125" Rationalized, for example ) is good practice with castings/ forgings in the absence of a call out.

@joepie221

3 жыл бұрын

They made some mistakes and assumptions.

I just knew that you would end up doing, a steam engine. Good show Joe! Your a natural at explaining, and showing how to do setups, and Machining. Stay safe.

HeyJoe, Thanks for the time you spend sharing your experience. Phil in Bedford VA

Nicely done. I hope anyone that is making a steam engine from a casting watches this. I like that Indical. Thanks for another awesome video. I hope you're planning to show most of the steam engine build over time.

@joepie221

3 жыл бұрын

I hope so too. I'll pick the tough stuff to get ya over the hump.

Great video! I certainly need to watch this one a few times to catch all the bits of wisdom you are throwing our way. Thanks!

Thanks Joe, I am in the middle of making a Stuart 10H from castings, you have given me a few ideas where to start on the cylinder. Thank you for the excelent videos. Not only do you show how to do it but you also explain the thinking behind which is very helpful to a beginner.

@joepie221

3 жыл бұрын

Glad to help

Just helped a friend do a Victoria steam engine. First time machining for him. He did great. I linked this to him. Good job 👍

Good One...! A great lesson on drilling and tapping small holes, end milling small parts, and following a print....!

I’ve heard Quinn mentioned you numerous times but this is the first time I am watching one of your videos. Beautiful work and good pacing. I suddenly have the urge to make a steam engine as well

Oh hell yeah! Look forward to this series 😁

@joepie221

3 жыл бұрын

Me too. Thanks.

@russellhayward2359

3 жыл бұрын

@@joepie221 great start Joe, I learn so much from your videos. Keep up the great work, from one very amateur hobby machinist 😊

Joe, that engine is gonna super nova with all that attention to detail!

@joepie221

3 жыл бұрын

I may have to put a rev limiter on it. We'll see.

JOE, PLEASE go into your upload settings and TURN OFF Mid Roll adverts. You Tube now automatically sets any new video uploads to Default ON. Really annoying to keep getting interruptions every 5 minutes or less. Great little gift for you, looking forward to you trying to machine the crankshaft. If you have never done one before, it could turn out to be a "Brown Trousers" job. LOL

@Bosbulls

3 жыл бұрын

Get the premium subscription. It is not that expensive, and definitely worth it to not get any ads.

@daveticehurst4191

3 жыл бұрын

Bosbulls It’s $ 12 a MONTH = $ 144 a Year. Maybe all right if you are working but I am retired. Also another factor is that I live in Australia and the pricing is US Dollar so in my money is well over A$ 200, not viable. As I stated above, Joe can turn the mid roll adverts off if he wants too. Other people uploading videos have done so, it is just a case as to whether Joe wants to make the effort or not. If he does not then he will be another contributor whom I shall have to reluctantly unsubscribe to.

Releaving the outside of the valve surface (making it lower) is for balancing the valve. Good for you for doing so. Many people over look the operation. As if the valve were to get debris it will have a trough for the debris to sit.

NIce video! Love my indical. I set mine to a ring if I have one, but more likely to a micrometer locked on the dimension or a stack of gage blocks with tool bits on the end. It is one of those tools where you have fish around for the smallest dimension.

Thank you for sharing this video! It inspired me to pull out a steam engine casting kit that managed to hide in one of my drawers for nearly, I hate to admit it, 45 years. When I bought it, all I had was my Atlas 12/36 lathe with a milling attachment and I didn't trust my set up at that time. Since then I acquired a Jet model 8/36 mill to which I added a 4-axis DRO.This should make the machining process a whole lot more manageable and more fun. Thanks again for sharing your video and keep up your great work!

@joepie221

3 жыл бұрын

Good luck with your build.

I watched the video fascinated by the orderly, logical sequence of operations that maximize the value of each setup. Thanks for sharing your insight and experience.

@joepie221

3 жыл бұрын

Thanks for watching. It went well.

Holding the cast iron model steam engine cylinder, in his hand. Victoriously and saying, "It was inevitable". I knew this would happen one day. Very informative.

Great way to pass an evening away. Thanks Joe ! I found a new idea for soft vice jaws, Rawhide. Crazy glue was made to glue skin. Cut some strips and glue em up. I make some on my site.

Aloha Joe, I have made this kit, it is interesting to see how you do it, At the time I did it I had a very small mill so much of my work was done on the lathe with a 4 jaw chuck. Thought processes similar, but dictations by tools on hand change things. Now that I have a nice mill it might be fun to do it again, but I am running out of room for the finished projects. Mahalo and keep them coming.

This is your bread and butter I feel like. I have nowhere near your experience and I appriecate the tips and trick I pick up from you on the lathe and mill. Thanks

Joe' blondie ' and adam are my favorites. Blondie has been working on this for a while but gotta have joe's take on it much appreciated thanks

I dont have a DRO, so i chucked a piece of steel in the lathe and turned a hat shaped plug for the cylinder and used an 1/8" center drill to mark center of the plug. I then fixed the cylinder one the mill table and used the plug to find center of the cylinder. Not moving the table, i just lifted the quill and removed the 2mt center and afixed my boring head. I then bored the cylinder. I'm not a machinist, but it worked and yes im saving for a DRO. Thank you Joe for this series..

Joe, you make it look easer than it is! i refuse to miss ANY of this series!! poppy

It’s great the way you explain your setups and why. Thanks Joe , lots of good info.

@joepie221

3 жыл бұрын

Glad you enjoyed it

Joe made a comment about hitting the numbers, standards are there for a reason. I’ve been playing around with my mill and DRO. As a hobby guy, this is new to me. What a revelation. I can find center with the tools needed, coaxial indicator is my go to tool. Carefully move to the coordinates and I can duplicate the same results every time. I’m referring to drilling the head before the cylinder, then using transfer punches to mark the cylinder. I can drill both parts separately using the DRO and it lines up. That is cool. What a revelation

@joepie221

3 жыл бұрын

As it should be.

Firstly, I'd like to say that I am subscribed to this and BlondiHacks channel. To address one of the commenters comments that Joe has many thousands of dollars of equipment, therefore his audience is aimed at professional machinists is misguided. I remember one of Joe's videos where he described a method for correcting the run-out in a three-jaw chuck, which was aimed squarely at the hobbyist, and helped me greatly. I do find it saddening that Quinn has blocked Joe from commenting on her video., Everybody has something to learn from their peers, despite their confidence in their own skills. I have no doubt that some of this can be achieved with hand tools. If that is the way you need to work, then well done, I admire your patience and skill. The internet is not the place to be trained in producing aerospace components. Just be nice to each-other. If you find something useful - great. Just don't feel that you have to belittle somebodies methods because you do not have the tools necessary to duplictete their methods ... rant over.

I always enjoy your videos Joe. Thanks for making them for us!

EXCELLENT!!!! You are the best! I enjoyed watching this thoroughly!

Very good set up ideas. I struggled with the castings. You make it look easy. Thank you for this video.

@joepie221

3 жыл бұрын

Thanks for the comment. A little pre-planning goes a long way.

Joe you have demonstrated many times over your knowledge of metalworking! I'm just totally lost when you are at the board. Those of us who have small or home hobby shops: & a limited budget/tool, fully understand that we cannot compete with the Professionals!!! In the context of purchasing tool's that not going to pay for themself. I haven't built a steam engine yet,... been thinking about do one for display. I Can Only Imagine all the free perks & promotional gear that you all guys get; Wish you well on your little engine.

@joepie221

3 жыл бұрын

I do get gifts and appreciate every one. But a subscriber bought this for me and personally delivered it. Way above and beyond generous.

Excellent video! I just bought this kit and I will be using your video series. I am a 48 year machinist, so I can do the work. You will make it great! Thanks.

@joepie221

2 жыл бұрын

Its a fun kit. Not too technical. I hope this series helps.

And it all looks so easy! Great work, Nice to see a good machinist

@joepie221

3 жыл бұрын

I appreciate that.

Both of these videos are an excellent example of difficult machining. While watching I was imagi ing how to do this without a milling machine but with a decent drill press and an x/y vice. By the the builder got through filing the surfaces flat they would be really good with a file.

@joepie221

3 жыл бұрын

Filing is also a big part of a true US apprenticeship. ( back in the 70's)

@rwiliamson8051

3 жыл бұрын

@@joepie221 UK too in the 60's... in my case hi.

Thanks joe!!! This is why i bought my machine in the first place but very quickly my skill level was lacking. Thanks for all the tips & thricks through the years and now a step by step how to! Grea great video!!

@joepie221

3 жыл бұрын

Thanks.

Great video and project Joe, thank you!

lots of good set up info here.i'm liking this a lot. looking forward to the next video. thanks prof joe

@joepie221

3 жыл бұрын

Thanks for watching!

@redneckswitwheels

3 жыл бұрын

@@joepie221 can u please tell me the kit part number?

@BedsitBob

3 жыл бұрын

@@redneckswitwheels Here you go. www.pmmodelengines.com/shop/steam/steam-engines/steam-engine-1/

Fantastic video Joe! Absolutely love sitting down with a coffee and watching your latest instalment on a Sunday morning! Thankyou...! From sunny Queensland, Australia

@joepie221

Жыл бұрын

My pleasure.

Joe. I am a fledgling to the model steam engine hobby. Not being a machinist, I am relagated to purchasing "machined kits" The difference in cost is minimal in relation to the time it would take to get fully functional to machine my own kits. Your tutorial videos show us, the laymen, how precise a hobby this is. You do an outstanding job of not only videoing the process but you explain in no nonsene descriptives of the processes and how you arrive at the finished product. Excdellent job, Joe. I am you newest fan.

@joepie221

3 ай бұрын

Thanks Randy. I try very hard to also be interactive on my channel. If you ever have a question, fire away. I'll answer if I can. Stay well.

love to see you do this with only a lathe and drill press. take to long but fun to see. thanks , waitin on #2

Good job. My uncle used to receive castings gratus, from major model engine builder-mafg'rs just to see how he would build them. I used to document, make drawings, of his finished product. I remember one mtg' r was Rossi.

@joepie221

3 жыл бұрын

Castings can be fun. You just have to get inside the head of the designer.

As always...lots of lessons included as you build.....thank you

@joepie221

3 жыл бұрын

Hi Chuck. Thanks for stopping by.

Hi Joe, just want to say thank you for the time and effort you put into creating your content. I also sub to BH's, and saw the similar content recently. I don't see the conflict with each series, and will be watching both with interest to note the process and results given the difference in experience and equipment...I don't know what's wrong with demonstrating that. Some things that I do on a professional level, and am always interested to see how someone else achieves a similar result, with a different and perhaps less technical approach. I enjoy your content, as I enjoy Blondies, and I say to both of you, Thanks! Stay Safe mate👍

@joepie221

3 жыл бұрын

Our presentations are coming from polar opposite ends of the spectrum. I think it is a great source for many of you to decide what works for you. Thanks for the comment.

@denny9931

3 жыл бұрын

If you are truly into the subject half an hour is basically nothing, i don't see a problem watching much more about it. As long as no one claims to be the definitive source, which would be questionable in century-old-technology hobby projects.

Excellent! Looks like a fun project.

@joepie221

3 жыл бұрын

Hi Guy. It should be. I've never done one of these from scratch. Thanks for checking in.

Awesome instruction! I watch lots of YT, but on this channel I pay total attention. I have a lot of experience working metal, but learn a lot here every time. That Indi-Cal is almost 3000 Bucks, and looks like something one could make at home. I have a two point Helios Inside mike that does most things that can do. Its 0-50mm in one tool.

@joepie221

Жыл бұрын

Its sold out, but under $300. www.flexbar.com/products/indi-cal-internal-groove-gage

@robertunderdunkterwilliger2290

Жыл бұрын

@@joepie221 One zero to many ;)

You are one of the few KZread presenters that knows enough not to use a surface plate as a secondary work bench. It’s amazing how some will spend money to have their plates recertified, so they must know how little it takes to cause wear, and then a month or two later, be throwing anything you can think of on it! I like that little cubby hole you have for it. It’s an excellent way to make sure nothing ends up on it that doesn’t belong on it.

@joshkandt2271

3 жыл бұрын

Jealous much? Sheesh

@joepie221

3 жыл бұрын

@Uncle Phil Any one that thinks I didn't sacrifice and work my ass off for everything I show and use in my videos should go outside and take a long slow deep breath. My facility and experience is from a lifetime of compromise, good decisions, hard work and drive. I will never look down on anyone with less experience or opportunity. If i didn't care to assist or share what I have, I wouldn't take the time to make videos like this.

@willispower9493

3 жыл бұрын

@@HairyNumbNuts I don't believe that is Joe's intent and I don't get the impression that's how he thinks. I think his channel does probably lean more towards people you are in the trade than hobbyists but a lot of techniques he shows can be done in 1/2 of a one car garage. This is what Joe does for a living so of course he is going to have multiple benches and some high end machinery but my guess is he didn't start out that way. My career path started out as an auto mechanic which I still do on the side and later as an aircraft mechanic and professional pilot so I'm not a machinist but I due do some machining, usually it's to build a tool or a part that I need, boring an engine block or rebuilding a cylinder head etc. I've picked up some of Joe's techniques and some things he does I would probably do differently. I also know the work involved and the sacrifices one has to make to buy equipment and/or improves one's skills and if you have a family they will likely have to make sacrifices as well. Also the majority of responses I've seen from Joe's viewers have been positive towards the other KZreadr, many have stated they have or do watch her channel. I've watched a few of her videos as well and I think she does pretty well with the equipment she has to work with and her experience level.

Excellent machining [every day's a school day!!!] thanks.

Really nice bore and great video, Iam learning and your help is appreciated. Thanks for sharing!

Fantastic as always, you do it your way Qynn does it her way, Keith does it his way… all very interesting to watch!!

@joepie221

Жыл бұрын

Mine was to print. :)

Looking forward to seeing this one through.👍

@joepie221

3 жыл бұрын

You and me both!

Good work and efficient use of set up time.

@joepie221

3 жыл бұрын

Thanks 👍

Good to see you doing some model engineering!

@joepie221

3 жыл бұрын

Hi Crispin. Good to hear from you. I've never done one of these. How's your's coming along?

@MrCrispinEnterprises

3 жыл бұрын

@@joepie221 Have a look on my channel. Cheers

I have started building one of these on my channel. This has given me inspiration.

@joepie221

2 жыл бұрын

I hope my material can help you. I'll have to stop by and check out your progress.

@tandb

2 жыл бұрын

Yeh it's useful for sure. Can't wait to get to the cylinder etc.

G'day Joe and greetings from Tasmania Australia, I am very glade that I happened to stumble across this one Joe, I am about to build a No7 horizontal mill it's large and I have picked up some great advise and ideas. Thanks mate kind regards John

@joepie221

3 жыл бұрын

Feel free to ask some questions if ya have any. I'll reply if I can.

You’ve recommended the indical , so I will return the gesture by mentioning “Clupet”cast iron piston rings....recommended by many steam engine fans, and made in the U.K. by some old guy in a shed. They overlap on themselves like a key ring ring does, and remove the problem of ring gaps closing up as engine parts heat up at different speeds!!

Excellent video Joe. I am restarting this series with my Great Nephew. I can’t imagine a better experience for a budding young engineer.

@joepie221

2 жыл бұрын

Thanks John. I appreciate the support. I hope he enjoys it.

This is like listening to someone speaking a foreign language. I have no concept or aptitude for any of this. This isn’t a knock at all. It’s impressive. Thank goodness there are people like all of you that can comprehend and work with this kind of stuff. I remember taking a “Metals” class in high school and running a lathe to make a screwdriver. Recall lots of hot, sharp and oily shards of metal. lol Nice collection of videos you have. I got here because I love trains and it said “steam engine”. 😁

@joepie221

3 жыл бұрын

Thanks for stopping by. I hope you come back for the rest of the build. Also search Chuck Tipton. He built a steam traction engine that will amaze you.

Joe, you are THE MAN. Thank you sir.

This entire series is fantastic (except for the autofocus blur in the later videos). Superb instructional on methods a professional would use to accomplish a perfect end product. Great video series Joe, and I look forward to your upcoming Mini Lathe kit project.

@joepie221

3 жыл бұрын

Thank you very much!

I learned a lot watching this video Joe, thank you for sharing!

@joepie221

3 жыл бұрын

Glad it was helpful!

Hi Joe, Having a number of KZreadrs making the same model really illustrates there are many ways to achieve the same goal dependent on your skills and equipment. One thing is for sure, that each of you will have a model steam engine at the end of your build. Take care Paul,,

@joepie221

3 жыл бұрын

Very true! I look forward to the payoff.

Really appreciate these vids and u sharing your experience

@joepie221

2 жыл бұрын

Thanks. I hope it helps.

Hello again on this one Joe. Sitting around with nothing to do so a rerun nere was just what the doctor ordered. Thanks a bunch fella. You just shortened up what was a very long day eh. Thanks a bunch eh. Take care eh, , , Yup I am Canadian eh, LOL.

Thanks for sharing! This series is a big help to me.

@joepie221

3 жыл бұрын

Glad it was helpful! Come back for part 2. Good content.

Awesome can’t wait for episode 2

@joepie221

3 жыл бұрын

Coming soon. Its already shot.

Hi Joe I am building the same kit now . Wish my Clausing table mill had a DRO so I suffer till that happens . You look to be a well skilled machines and finding your videos very helpful. Best BB

@joepie221

3 жыл бұрын

I have a video on making life easier without having a DRO. You should check it out for reference.

@billbrennan8405

3 жыл бұрын

Joe I noted your Co name and looked up up, Wow what a great looking shop , a total Quality Driven Shop. I look forward to reviewing all you first class videos. Thank You again for you effort to share your advanced machining skills and knowledge. BB

Quinn is making this one too.

Great work Joe.

@joepie221

3 жыл бұрын

Thanks 👍

I'm amazed at you running handwheels on a circumference making it look CNC!

@joepie221

3 жыл бұрын

It was actually an apprenticeship exercise I had to pass before I could work on actual parts. Forward and reverse.

@willacewallace5905

3 жыл бұрын

@@joepie221 Since seeing this, I've already started on some cut rounds to practice.

@samrodian919

3 жыл бұрын

Joe Pieczynski how long did you have to practice the moves before you were confident enough to take the test ?

I sat fascinated all the way through this episode, thank you. I have built a Stewart v10 at my modest home workshop. Turned out well and works. No where near skill level of you Joe. Great series and thanks for posting.

I have never seen this sign for a finished surfave :D. On our Drawings it looks somewhat like a square root with aditional circles on it. Always something new. Nice vid as always, keep it up

@joepie221

3 жыл бұрын

One is a 'machine this surface" symbol, and the other is a"make it this smooth" symbol. The ones with the numbers are the ones for required smoothness.

A good tip to use on machining the main engine frame is to mount that frame to a square steel plate and use that to hold the engine frame to do all the machines that way everything is square and perpendicular

@joepie221

3 жыл бұрын

You have to start somewhere though. Maybe several steps before you get to that starting point.

Hi guys. To clarify certain recent statements of other builders regarding this exact casting. There are NO features on this cylinder that have to be transferred from any other components. In the presence of actual drawings that contain dimensions, the sequence of this build is not important at all. Familiarize yourself with all the components and design intent before you do anything. Also, in an attempt to filter out unpleasant comments and critiques of other builders, comments with other channel names will be held for review. Feel free to use first names or initials, but please keep it civil. Enjoy !!

your videos alway fascinate me and id like to see how you are cranking yr x and y to achieve the style of cuts . look forward to see the finish product, thx jo

@joepie221

3 жыл бұрын

My hands do all the work. I just watch.

@bigblock4270

3 жыл бұрын

@@joepie221 great philosophy, look forward to the next video of this project .

If this looks a bit scary to anyone thinking of building one I can assure you that Joe is very good at machining and it will be perfect. But it doesn’t need to be. Those slots where steam comes in and out need to be spot on for distance. However, you can make mistakes and fix them. Like making an oversize piston because the bore went wrong. This is a really old design from an age with some pretty basic 19th century workshop machines. On top of that it is designed to be reworked as it wears. So jump in there and make a steam engine :D

nice job so far !

@joepie221

3 жыл бұрын

Thanks!

I am learning a ton with thees videos

That's a nice project. Model steam engines are cool.

@joepie221

3 жыл бұрын

This is my first.

Wow, lots going on here, I will have to re-watch some parts as you are travelling a bit beyond my comfort zone. I see a lot of areas of potential error for the uninitiated. Well done Joe, enjoyed it immensely, great filming work! Cheers!

@joepie221

3 жыл бұрын

2 1/2 hours of raw footage cut into almost 100 individual segments. This one was tough to compose. I'm glad you like it and hop you come back for part 2.

I think I've seen that kit somewhere else on You Tube ;o) It's obvious you've had a lot of practice coordinating X-Y to get around cylinder so well. Going to look good when everything is symmetrical around undefined centres, looking forward to next episode. PS, you've inspired me to actually do some math to find an angle for some spacers instead of just 'looks about right', 7 degrees 40 minutes, was easier than I remember when I was in school 50 yrs ago (kinda wish I hadn't typed that, feeling old all of a sudden) Oh, and I made a low profile saw holder earlier this week from a 7/8" dia. grade 8 bolt I found, Should be plenty tough enough but used 4140 for the mandrel :o)

Excellent project.Thankyou

@jasonburns1407

3 жыл бұрын

Awesome can’t wait for pt 2 👍

@joepie221

3 жыл бұрын

Stick around.

Hi Joe, Thank you. It is an absolute pleasure watching you machine this steam engine and showing your techniques for setup. Looking forward to the next video. Is this the same steam engine that Quinn is currently machining? You and the family stay safe.

Joe! I just freaking love how you freehand facing the cylinder faces. Mad skilz of The Master Craftsman you are. Can you revisit your Mill driving maze skill builder sometime? Best thing you could do to.imptove the game of all of Home Gaming wannabe DIYers. Show us how its SUPPOSED to done. High speed, low drag. WITHOUT CNC!

@joepie221

3 жыл бұрын

I do have a video on that maze. Check my channel.

What a blessing to watch a master craftsman methodically plow through these features. Gold nuggets everywhere. Love the ‘vice-code’ guiding those hand wheels. So thoughtfully simple. Thanks Joe. 👍👍😎👍👍 Joe, May I ask how you determine the depth of the various center drill holes such that you get the perfect chamfer for the final drill and tap size? Maybe it is just experience, but clearly you are doing something deliberate 😊.

@joepie221

3 жыл бұрын

I drill them to just a little larger than the thread. I can usually hit it by eye with a pin local for comparison.

@johandebruyn7941

3 жыл бұрын

@@joepie221 With a pin for comparison. Gem to remember. now mine will be perfect to