Where were you 12 mugs in the trash ago?1 Finally a tutorial that fixed my problem in one go!!! Thank you so much. You just made me very happy and encouraged about sublimation. :)

@HonestlySpINKing

5 ай бұрын

bit.ly/MacPrintSettings2023HSINK365

Please keep doing what you are doing I’ve been using my printer and Mac for years had everything perfect then with the new update everything was jacked up colors all crazy I literally was so depressed for days trying to figure it out and just like magic u solved my problem. I thank god for you!

@HonestlySpINKing

2 жыл бұрын

OMGggg this is sooo amazing to read. THANK YOU so much for taking the time to leave such an encouraging and thoughtful comment. So glad it was helpful for you.

@mstgirl1015

Жыл бұрын

Great Job!

Thank you! I didn't even know this was a thing!

Thank you for this. It helped me find the settings. I'm still having a problem with pizza roller dots through the prints, though none of the ink is dotting in the white areas on the paper. I even tried -50 and drying time at 50. It's a hair better, but still have the dots. I'm using an Expression Photo XP-970. I'm going to try cleaning them to see if it helps. I have doubts, since none of the ink is dotting to the white areas.

Thank you so much !!!

Hello , thanks so much for this video! Does that mean I can go ahead and order ink and not worry about icc profiles? Because it seems that most places have stopped offering mac profiles. I’m a beginner so I just want to get it right . Thank you again

Thank you sooooo much You are amazing.

@HonestlySpINKing

2 жыл бұрын

You are very welcome

I done this and it worked!!!!

@HonestlySpINKing

2 жыл бұрын

Thank you for watching and this comment. Glad to know the settings are working for you

Thanks!

How do you get your printer drivers to update passed 3.0

thank you

Thank you

Hello I have an Epson Workforce Pro 4734 and MacBook Air and I am having the hardest time getting the firmware to install also Keep getting this ink cartidge is not installed correctly error please any help would be greatly appreciated.

I try to print using an Epson 15000 with a 10.85 driver and when I try to print using rear tray settings nothing comes out and it says job complete. Any suggestions?

Hi. I'm using an iMac and don't have that options lost😢

I have been trying different setting with my MAC, hope this works. Is it ok to leave the DPI at 720? That was the default setting.

@HonestlySpINKing

2 жыл бұрын

Yes

@HonestlySpINKing

2 жыл бұрын

How are the settings working for you?

Hello I have an Epson 16600 and tried the settings but my images come out very muted, I’ve also tried the Epson IJ 07 and also very muted , used Cosmo’s ink profile - better colors and too pink. Do you have any suggestions? I use Silhouette.

@HonestlySpINKing

Жыл бұрын

Muted after you press?

Hi. So when I went to the Options and Supplies, it doesn’t give the Option setting. What am I doing wrong?

@elainefeala5557

Жыл бұрын

Same here

I need to check my drivers And settings.. they are definitely a little different.

when I select add printer and select my printer, click add and continue I get an error code. your video has this step at 7:20 minutes. Error code is "an error occurred while trying to add the selected device". I have uninstalled everything and added the combo drivers again but it's still not working. I have had my sub printer for 2 years and have yet to use it because every time I try the prints don't look good. please help.

Hello so basically it doesn’t matter if we use design space or photoshop these settings stay the same ? I use the above mentioned and have a MacBook Pro

@HonestlySpINKing

2 жыл бұрын

Correct. The same from all programs

I did these exact steps and it still downloaded the verson driver 3.0 and I made sure everything was deleted with epson on it.

Shakia do you have a video on Paper Error on the WF7820. I just purchased one and I keep getting paper mismatch. I tired changing it on the computer and match with the printer but I'm still getting that message.

@HonestlySpINKing

Жыл бұрын

When it comes up on the printer Hit done, select the bottom option on the next page and then print.

Bless you for sharing this.

hi! What version of MacOS are you using please?

@HonestlySpINKing

2 жыл бұрын

I am not sure to be honest. I did this from my husband's computer l am a windows girl

With my ET-4700 printer I only saw "printer features" once 20 minutes ago! But when I went back to it, I didn't see printer features again.... Do you know why it doesn't show up most of the time? I installed the driver correctly.

@HonestlySpINKing

2 жыл бұрын

Did you have use generic settings checked?

what happens if you DO NOT have the box that says "use generic features"? This is where I get stuck bc it's not showing on my screen

@HonestlySpINKing

27 күн бұрын

There is an updated video for mac. bit.ly/MacPrintSettings2023HSINK365

@HonestlySpINKing

27 күн бұрын

There is an updated video for mac. bit.ly/MacPrintSettings2023HSINK365

So basically these settings stay the same even if I use design space or photoshop? I have a MacBook Pro

@HonestlySpINKing

2 жыл бұрын

correct. I use the same settings no matter what program i print from

Well the high speed does help in my opinion because before I had it on I would get lines in my images after printing

@taylordulay8303

2 жыл бұрын

How did you change the speed in Mac

@Texaschic79915

2 жыл бұрын

@@taylordulay8303 sorry I just seen this …I opened my printer settings and clicked on every tab til seen high speed and turned it off

@filmkitty

Жыл бұрын

@@taylordulay8303 were you ever able to find this answer? I also cannot find it

@conniedutkiewicz8778

Жыл бұрын

@@filmkitty Print speed doesn't come up in my setting either. I have a MacBook M1 Pro. Did you ever find it?

I added the printer using the “+” sign and instead of leaving AirPrint i changed it to the printer software as you mentioned bit my problem is that when i send the job to my printer it doesn’t print only when the printer is added with AirPrint. Any suggestions to fix this?

@samdp42

Жыл бұрын

Did you ever figure this out?

@nedidesigns

Жыл бұрын

@@samdp42 yes I did thank you!

How do I get pass the Driver 3.0??

I need help setting up my printer I tried that and it didn’t work … anyone to help 😢?

My pink is not printing out like the pink on the screen…. It look kinda peach…. Please help me !

I don’t know if you can help me or not but I thought I would give it a try. From Sihlouette I want to print a tumbler wrap but my ET 4800 won’t print the given measurements. It shows in the preview how it will print but the height of the wrap prints too short. It prints right in my HP but that isn’t a sublimation printer. I have just a few options in my print set up. There is no borderless option if that’s the problem. I tried everything that I learned and it worked 4 times after I changed the use setting from AirPrint to ET 4800 but it quit printing them. I’m confused and frustrated. Do you have any suggestions? Thank you.

@HonestlySpINKing

2 жыл бұрын

What size tumbler?

@sherrysodergren1740

2 жыл бұрын

@@HonestlySpINKing 20 oz. My W is 9.210 and the H is 8.250

I am having the issue to where the image is dull and not as vivid as it should be, when I heat the image to my shirts. What could I be doing wrong?

@HonestlySpINKing

2 жыл бұрын

Hi what is rhe polyester %

@PREACHERMANN2003

2 жыл бұрын

@@HonestlySpINKing 65/75%

Is it normal to get lines through the printed paper? I have tried "Best Quality" and "Quality". Best Quality gives me the best color, but both have the lines. I haven't tried to press it yet, so don't know if they will be as noticeable.

@connic.7341

2 жыл бұрын

Did you turn off high speed printing. That worked for me.

@filmkitty

Жыл бұрын

@@connic.7341 I cant even find high speed printing as an option for a mac. Have they removed it?

@hayleysmith4036

Жыл бұрын

I also don’t have the high speed option :( let me know if you find a solution to this

@ashleychapman7755

7 ай бұрын

@@hayleysmith4036 I know I’m a year late to the party, but I use a wf7710 and have a Mac with m1..I had to update/reinstall the drivers and then the other options mentioned in the video appeared

I installed the printer drive but I still don’t see the same print settings as you. Can you help? Thank you!

@HonestlySpINKing

4 ай бұрын

The drivers have changed let me send you the new link

@HonestlySpINKing

4 ай бұрын

bit.ly/MacPrintSettings2023HSINK365

I wonder why my Mac doesn’t have brightness etc and the mirror on tabs

@HonestlySpINKing

8 ай бұрын

Here is the updated 📹 bit.ly/MacPrintSettings2023HSINK365

Mine doesn’t show printer features 😢 how could I get them

My operating system is not on the list. What can I do?

@HonestlySpINKing

7 ай бұрын

Use whatever is the most recent. Also here is the updated video bit.ly/MacPrintSettings2023HSINK365

how do you change the settings on the new ios

@HonestlySpINKing

8 ай бұрын

Here is the new updated video 📹 bit.ly/MacPrintSettings2023HSINK365

@truckingwithprietoprestige1754

8 ай бұрын

@@HonestlySpINKing thank you still busting my head i’m running os14 still can’t see where to change the paper type or speed i’m using a sure color f170

@HonestlySpINKing

8 ай бұрын

@truckingwithprietoprestige1754 awee ok these settings are for the Epson that are converted not the f170. There settings are wayyyy different

Ok so before i followed ur steps everything was fine my designs just weren’t printing out with vibrant colors, now after following ur steps my designs arent even being half printed….idk what to do now i am soo stressedd and confused 😔😔

Hi I followed your video for my Mac settings. Now my prints won't mirror. I had it previously setup. I guess now it's mirroring twice and is canceling out. How do I stop this, so that it mirrors again?

@HonestlySpINKing

2 жыл бұрын

what program are you printing from? do you have it mirrored in the design?

@anitathompson8489

2 жыл бұрын

@Honestly SpINKing 365 I'm printing from silhouette

@anitathompson8489

2 жыл бұрын

@Honestly SpINKing 365 I'm so new to this I'm not sure if I have it mirrored in both.

@redgeminipa

2 жыл бұрын

@@anitathompson8489 Honestly, I'd never use mirroring handled by the printer. If you need the design mirrored, just mirror it in the app you're using. This is crucial if doing print & cut.

@CHINO718

Жыл бұрын

@@anitathompson8489 just right click your design and “Flip Horizontally”

im so confused why my Mac is not showing the option to use generic features

@HonestlySpINKing

Жыл бұрын

Mac recently had an update. Remove the printer and when you add it back click the dropdown for use and click select program. From there select the printer you are using. This will apply the drivers settings.

@JRich321

Жыл бұрын

@@HonestlySpINKing can you make a video about this please. 🫶🏼 I’m having the same issue.

Mine dont show the options tab. Any idea why???

@ashleysmith6463

Жыл бұрын

Check to see what version of your Epson driver is downloaded onto your computer. Anything under 10.0 is a NO. 10.0 and higher is what you are looking for.

8:54 I don't see all those options in there. All I've got is 'Thick paper and Envelopes' and 'Warning Notifications'. I don't understand why these are missing on my Mac but are there on my PC?

@jamesLG1

2 жыл бұрын

Try adding the printer without using AirPrint. IE: use cable or IPP wireless connection

I didn’t get the color settings how can I get them?

@HonestlySpINKing

Жыл бұрын

Mac recently had an update. Remove the printer and when you add it back click the dropdown for use and click select program. From there select the printer you are using. This will apply the drivers settings.

It says an error occurred while trying to add the selected device 😢

@HonestlySpINKing

7 ай бұрын

a lot of things changed with Mac Follow this one bit.ly/MacPrintSettings2023HSINK365

i do not have any of these options with mine on my macbook pro :(

@jessicawhite1224

2 жыл бұрын

i figured it out. it didnt download the correct drivers

@keneshia9618

Жыл бұрын

@@jessicawhite1224did you uninstall and redo it?

Mine does have that option. Generic something .

@HonestlySpINKing

2 жыл бұрын

Be sure that you have installed the drivers. If you have try downloading and reinstalling again. If it stillnfoes not come up you are using an iOS that does not have it.

@rohshelly340

2 жыл бұрын

@@HonestlySpINKing thank you so much for your help.

I have the F170 and I don't have those settings, on a Mac

@HonestlySpINKing

2 жыл бұрын

The F170 is a SureColor series. It is an actual sublimation printer so the settingvare different than the Epson desktops made for home and small office use. These settings are for the printers we "convert" into sublimation printers. I do not have the F170 or F570 to do a video on the settings.

@thecraftguy21

2 жыл бұрын

@Honestly SpINKing 365 yea that's why I bought it but the colors come our really ugly very dark and nothing close to what I see on the Mac 😑

@cherylkerner4648

2 жыл бұрын

@@thecraftguy21 I also have the F170 and am having an issues with the color. After spending numerous hours on the phone with Epson, they are replacing my printer. Hopefully the problem will be solved as I am. not a happy camper right now.

My Mac has none of those options. 🤔

@HonestlySpINKing

2 жыл бұрын

Did you install the drivers and choose use generic settings

@leana82lopez

2 жыл бұрын

Same says I can’t choose my printer

@nancypicado9946

Жыл бұрын

Im having the same problem.

@KL-je4ye

Жыл бұрын

Mine doesn’t have the option to even choose generic settings

@sexylauraloo

7 ай бұрын

Same!!

Mine does not offer use generic printer features

@redgeminipa

2 жыл бұрын

Make sure you select the Epson drivers during install, instead of AirPrint.

At 730 time it doesn’t add ???

Thank you so much!!

Thank you so much!