Looks great! Can't wait to see the rest of your build!

@QuadMcFlyFlies

3 ай бұрын

One other comment, I would recommend just sanding down that spacer plate a bit so it fits, or you can print a TPU mount from thingiverse designed for 2mm plates so no spacer is necessary. The gap with the 3mm injection part makes it more likely to have issues if you don't use the spacer. GetFPV should have spacers with better tolerances in stock shortly, so you can also just get with support and once they come in they should be able to send you the correct spacer plate as well as the GoPro plates for the rear. There was a tolerance issue from the factory some of the early batch frames, but support will take care of it for you if you contact them. Honestly just sanding down the plate a bit is easier than waiting on shipping though, so I would probably go that route.

@wallfpv

3 ай бұрын

Thanks a lot. Appreciate your support :D

@wallfpv

3 ай бұрын

Ah thanks for sharing the knowledge. Good idea I will try just sanding down the plate a bit because I am from Germany so the shiping would take ages again from getfpv :D.

great build video. Thanks!

@wallfpv

3 ай бұрын

Thanks a lot 🙌. Appreciate your support 🔥

The gopro mount spacer is tricky but i used channel locks. from the curved front of frame to the gopro mount and pressed lightly till fell into place. Next time ill use a piece of cloth to prevent minor scratch but worked better than expected. i can send a pic let me know. Ive built other qav frames same issue with gopro mount spacer. How did you mount the gps? do you have a pic? drill two holes and ziptie?

@wallfpv

Ай бұрын

Hi, thanks for sharing your experience about the GoPro Mount xD. I did it with some sandpaper, so it fits perfectly. For the GPS I just used some tape. You can send me a DM on Instagram @wall.fpv if you want a picture of it :D

Can u show us the eachine wizard x220s i wanted to buy it but i dont know if its good.👍

@wallfpv

2 ай бұрын

I won't make a review about it because I wouldn't recommend it. Just have a look at iFlights RTF Nazgul etc they are pretty good, or also GEPRC Drones

Hello!!! Do you know how many mm are between axles??? in some shops it says 220mm but i think thats the distance of the 5" version not the 7" Thank You!!

@wallfpv

2 ай бұрын

between the motors? Do you thought about 7.5inch props right? If yes I also bought 7.5 inch props but they are to large. You can just mount 7 inch props on this frame

@Fiunsky

2 ай бұрын

@@wallfpv yeah between the motors!! from the front right motor to the left back motor. I'm. Looking for one 7 inch frame that it's not that big, so I can put 6-7 inch props and fits good. Also did you already tried the drone flying going fast?? I would love to know how this frame handle the vibrations of a 7" propeller. Thank you for talking your time for answering man!!!

@wallfpv

2 ай бұрын

@@Fiunsky so between front motor and back motor we got 185mm if you measure it straight from the motor middle. Hope that helps... :D Also yeah I like the frame a lot. It durable because I disarmed my quad by accident and fell down 80m and nothing was broken (just props). Also the handling in the air is pretty solid and it handles vibration very good. You don't see any vibrations on the fpv cam because of the rubber stuff at the front cage and also the FPV Footage on the gopro doesn't got any vibrations. I always love to help other people so thanks for asking :D If you want to have a look on my FPV Footage I did just go to my Instagram: wall.fpv --> the post in the mountains as you will see on the thumbnail Have a great day man 🤝

@Fiunsky

2 ай бұрын

@@wallfpv thank you so much!!! 🤝🏻

@wallfpv

2 ай бұрын

@@Fiunsky No problem. I am glad it helped ☺

I don't understand why they include the gopro mount spacer if it doesn't fit, it even wont fit on the back plate attachment!

@wallfpv

2 ай бұрын

I got one of the first gopro spacer mounts and they are a little bit to thick so I need some sandpaper to get it thinner. But I think if you buy a new one now it should fit. Yeah a little bit bad :/

@colibrifpv

2 ай бұрын

​@@wallfpv Mine was also super hard to get in the first time, but after that it's much easier to work with.

@wallfpv

2 ай бұрын

@@colibrifpv ok so yeah I will try to use the spacer then ☺

@colibrifpv

2 ай бұрын

@@wallfpv Yeah, just use a bit of fine sandpaper on the opening of the plate, which was what one of the designers recommended to me. I actually didn't do that, it was a royal pain the first time, but after that initial use, it got much easier...

took me 15 minutes to build the quad. took 2 hours to get the gopro mount in correctly. bad design. you will get jello without the spacer

@wallfpv

2 ай бұрын

😂 yeah it's really annoying but I don't have any problems without the spacer. But the safer option would be with the spacer mounted