3" FPV Drone | My First 3D Print Design | VixenBuilds
#shorts
Minute Build of a 3" FPV drone w/ custom designed 3D Printed Frame (All Up Weight of 240.5 grams).
Quick test flight at the end.
Check out my channel 4K HD drone flight videos.
Parts List:
Electronic Speed Controller: RUSH MATRIX 30A Blheli_32 4 in 1 ESC
Flight Controller: RUSH CORE 7
Motors: BETAFPV 1506 (3000 Kv)
Propellors: Gemfan 3052 Tri-Blade
Video Transmitte: Rush Tank Mini VTX
Radio Reciever: TBS Crossfire Nano
FPV Camera: RunCam Phoenix 2
Radio Transmitter: TBS Tango 2
Battery: 3S - 750 mah LiPo
Пікірлер: 102
Maybe do some stress analysis on the arms via ansys or something. Might save your quad from a nasty inward break due to extreme motor thrust
Damm Is so good and cool
A little trick i do is design the frames abit more narrow and taller to get some vertical dimension and more aerodynamic and extrude round holes through the middle of the x frame and slide carbon rods through the frame with some glue for extra stiffness. you can remove atleast 1/3 of the plastic in the design then and use less infill basically a carbon rod skeleton i side your frame
@conorstewart2214
8 ай бұрын
Yeah flat frames like this aren’t designed for 3D printing and hence you don’t get good results. Designing a frame to properly make use of 3D printings capabilities would get much better results.
That looks weirdly cool
Great job, super clean build!
That’s a beauty!!!!
Woww it so cool and fantastic
Great work, love how it turned out!
@AlSTORIES777
8 ай бұрын
Stl file please
gorgeous build
До первого столкновения с землёй)
Spectacular 😍😎👍
до первого краша
Wow looks awesome!!! Very beautyfull 😮😊
Uaaau!!! Stl file?
Awesome build! I’m just curious if it can take a hit
@nitrous888
8 ай бұрын
So what? You just print another chassis
@disminliguido
8 ай бұрын
It can, Just one 😂
@tysk5729
7 ай бұрын
@@nitrous888that wont do, if you have to print and re-assambly every time compared to other drones that can crash verry easily
@louiscrespo1280
Ай бұрын
@@tysk5729just reinforce the print duh
perfect video
awesome build man, Could you upload them as well?
Stl file or the cad model ?
Clean build
Looks great man neat job
How much did the components come to?
@cadburrower3736
8 ай бұрын
Yes I’d like to know this as well
@isaacanguloplays7766
8 ай бұрын
Fr I’m 👀 mg to build my own
@simonetienne135
7 ай бұрын
Hold down on the video and click on description, there’s a part list there
@Brielshallouf
4 ай бұрын
@@simonetienne135rockstar
Cute drone
Good luck
Bien joué...! 👍🏻
Прикольный дрон
I need one !!!!
Looks really cool but I doubt about the integrity of the thing . Not crashes but motor torque can make cracks in it and also vibrations
Chris Rosser has left the chat :)
Nice
How can i make my own ? Can you put a part list and the stl somewhere please?
Let's Gooooooooo
Cleeeeaaan
This is so cool. Is there an STL file that I can download and the parts I need to purchase? Also how much does it all cost to make?
very nice
❤❤❤❤❤❤❤❤❤❤
I saw a rotorgeeks strap! Only for a split second, but I know that logo anywhere.
nice design. ive also designed an 3d printed a 2" and 2.5" frame out of Polycabonate, but it always had sone printing defects because PC was hard af to print ... whats your startup sound called?
Did you use PLA as the printing material? I printed a body similar to this, but my 4 inch drone did not fly. Because the drone was starting to shake as the engines started working. That's why it doesn't make sense to make bodies with PLA.
What's your spool you used.
How much did all the parts cost? Without the 3d printed
How many mm the baseplate? Pla+?
❤❤❤
i would totally use this, but have a carbon fiber bottom frame
@A.pplefritter
4 ай бұрын
i think its called a bottom frame, im super new to the fpv world
Are those emax on parts?
👍
How do you record the goggles?
When did it shatter?
What filament did you use?
Bet you could put 3.5 inch props. Enjoy fpv’n!
Модель рамы в 3д можешь скинуть для печати
How does it withstand an average crash?
@shotgun2063
9 ай бұрын
I bet not well.
I think ill try to make a drone frame out of some sort of engineering resin. Should probably take an impact better than pla. but idk
@Industry-insider
9 ай бұрын
No that’s too brittle, it has to be at least as strong as carbon fiber since that can easily break in a crash, both of my drones have broken frames at the moment, one of them has 3mm thick carbon fiber but it goes 130mph
Hi,I have a 3D printer and I know about electronics, can you give me a list, or where can I find a list of parts for me to make my own FPV drone, I am a beginner in FPV
Are you selling this frame? I’ll buy one. Looks very rad
PLEASE I BEG OF YOU can you post the stls? Please?
What's the cost bc I'm looking into fpv
Are you selling these? Pretty cool brother
Now make it in carbone fiber
This is awesome 👌 I would love to one day build my own fpv drone. Can a 3inch carry a go pro?
@Michael-nu6fb
9 ай бұрын
It's really sluggish and super heavy feeling. So you can fly but not well.
we need tutorial plz ❤❤❤
Amazing ! Can someone please list down all the electric components he used in here?
@cadburrower3736
8 ай бұрын
Check the video description
please share stl?
Dude that thing is awesome? How much does it weigh? And are those 2.5 or 3 inch props?
@Vixen_Printz
9 ай бұрын
All up weight is 240.5 grams and I used 3” props. All details in the description ☺️.
Motar ka mame btao kaha se buy kia
You Can give a 3d model
You sell it??
Can u crash test it
These designs are not good for 3D printing. Thin flat arms are meant for carbon fibre sheets. For 3D printing you would be far better to take advantage of the capabilities of 3D printing and design the arms to be thicker and a more optimal shape. You can’t just expect to 3D print a frame designed for being cut out of a carbon fibre sheet and expect it to work well.
I've never understood how people can fly analog... How can you make out details enough to fly as fast as you will? I understand many have and do, but maybe its my eyes or somethin...
Класная сборка сколько стоит хотелось бы повторить
Bart, please give me the file
мне очень понравилось! хотел бы узнать вес с установленным акб, так как в россии запрещены полеты беспилотников вес которых более 150грамм, у меня есть 3 коптера но на данный момент они бесполезны( думаю переходить на fpv дроны
Hi I am a really big fan of fpv but my family not rich my wish is to build a really low budget fpv but my family doesn't let me 😔😔
Gw mau bang dron gw rusak
Don't get these 3D printed frames... Spend $10-$20 on carbon fiber. It will fly 1000X better and it will last for more than a weekend.
18th
Please 🥺 give me one drone for me ❤❤
Can you build me fpv drone for free or give me fpv drine for free
Camera quality😢😢😢😢😢😢😢😢😢
Ukraine FPV?
You did all that work for nothing because you’re going to break the frame within 10 minutes, it needs to be carbon fiber
@JaydenLawson
8 ай бұрын
Then print another :D
Please give me 😢😢😢😢😢
Gift me tish
Одноразовый