Putting that little square piece for the spider gear is such a pain in the ass My drunk ass took like an hour putting that s*** in last night.thanks for the video, it helped me out

It's been three years, wow. Finally broke my second laser nut. However after watching your videos. I now have the knowledge to fix them myself. Thanks. 👍🏼. I solved my center differential problems. Going to rebuild it. Again, thanks

Thank you for recording/publishing this. I'm a very satisfied Losi 'DB Pro' owner and the information afforded in your video is much appreciated. I've already applied 'lock-tight' to the motor/differential mounting screws as a prophylactic against stripping the composite OEM spur gear.

Great video it helped

Great looking rig , almost makes me want to try one and live with all the issues.

Differential master now you’ve been on diff duty for awhile now 😎😎😎😎🍀🍀

@rcguygarage

3 жыл бұрын

STILL waiting for your REAL REPLY!

I'm glad I follow you cuz now i know what i need to upgrade....... Thank you

Man I just rebuilt my diff and struggled with those little squares for like 30 mins 😂

So funny I did the EXACT same thing with the center driveshafts leaving them out and locking everything in place on my DB pro lol! A week ago haha

I enjoy your videos, but i think you make more than I can watch. lol

Man I want the laser so bad🙏🏼🙏🏼 one day Hopefully

Just a thought - I've had really good luck with the loctite sticks. They look like glue sticks, and the loctite lasts a lot longer. Way less mess and no drips 👍

Free Tip of the day: Want to clean diffs really good? I use Zippo Lighter fluid $5 for big can, soak parts for like 5min...Paper towel, and tada spotless!

Great video, thanks for putting this together for us. Just got my losi and already blew two drive shafts. I'm guessing this is going to be on my list soon. aside from this center gear and the drive shafts, what are the other weak points on this rig?

Hey whats that little robot called! I want one!

Nice Vid! What tires and hex nuts did you use? Thanks

What weight diff fluid , do you think was installed from the factory ? Front , center and rear .

Nice tutorial. What screw kit are you using? I have a lasernut but can’t find a kit specifically for it. (I’m a newb. 1st RC)

Just shredded my plastic spur. New hot racing spur on order. I’m surprised at how much ware my pinion gear had so I ordered a new pinion as well.

@rcguygarage

3 жыл бұрын

RIGHT!!! Left mine in still had life left

Could you "slot" that case for venting purposes without it hurting it?..mayve..idk..just wondering

The 7200 mAh battery on the table is that from the truck? I am getting a Losi Lasernut 4U and looking for the biggest battery i saw the Spektrum 10000mAh 4S 120c IC5 14.8v, but unsure if its too much ... i need to get a battery n charger and looking for the longest lasting one?

Can hear vector in the background I see two of his black and white boxes

hey mate, thanks for the video! considering that aswell for mine :-). could you also please tell me what wheels and tires these are? thank you already!

Dude, R2-D2 in the background is driving me mad

any chance you have access to another SCTE40SM1 spur gear?

Did you Use any liquids to clean up the parts(WD40, Brake cleaner?) or just paper towels?

Looks like nice day at beach, my wife hasn't taken the bait yet....

@rcguygarage

3 жыл бұрын

Soft serve icecream? Coffee?

@RCRitterFPV

3 жыл бұрын

​@@rcguygarage I mean wheeling the rig while I try to get video of it. think I need to build the jeep she liked as a kid... she always talks about a red little 4 cylinder boat yard jeep with white roll bar and bald all season tires... the thing you took to the deli to get bags of ice and sandwiches.

@rcguygarage

3 жыл бұрын

Yes you could SWEETEN the deal with coffee or soft serve icecream

What diff weight diff oil did u use front rear and center thanks.

Horizon has the fluids listed in the downloadable exploded parts document

@rcguygarage

2 жыл бұрын

Sounds like reading 😂🤣

Love the videos! I know you've put 500K in the center ... how about the front and rear? You sticking with the stock weight or something else?

@rcguygarage

2 жыл бұрын

So long ago honestly I can't remember and I should start keeping a log book like I used to

hmm i cant seem to find one of the SCTE40SM1 spur gears for sale anywhere, do you know of any place to find one? of a different upgrade spur gear for the lasernut?

@rcguygarage

2 жыл бұрын

amzn.to/3CE3mAu

Is the dB pro the same center diff?

500k in the center diff what are you running in the front and rear?

I just recently purchased a Lasernut and manual doesn't mention Diff weight, however, I noticed that the online manual (from Losi) mentions 10k in front, 5k in middle, and 20k in rear. I also noticed that the M4 nuts that hold my wheels on are not nylon lock nuts as specified in the manual. They are non-nylon nuts. Is this normal? Thanks.

@rcguygarage

3 жыл бұрын

Maybe it was a revision if they are now using knurled nuts however in my opinion either way knurled or nylock lock tite should be used

@rcguygarage

3 жыл бұрын

My center diff is now 500K

Hey, nice video, I just see a little mistake there. One of the dice holding the shaft is outside the shaft, it's above it. It 's nice to see when you close the differential. :(

@rcguygarage

3 жыл бұрын

YES!!!! the video was left this way to SEE how closely people pay attention 😉 but the process is still the same

I can’t go through a full battery without having to rebuild my center diff afterwards! I’ve gone through 3 now.

@rcguygarage

3 жыл бұрын

Wow you must have a Monday / Friday build

@thomasgimenez5169

2 жыл бұрын

Add 1 shim to the ring gear side ,and add 250k or 500k silicone differential fluid. Use associated electrics green slime on your o rings .

There are tweezers for such a beautiful, precise differential. A very nice differential made of aluminum from Losi but save on the main gear? By the way, you made a mistake. One of the ends of a pin is not in one of the 4 blocks but below it. See at 31:05. But nice video. Keep it up.

@rcguygarage

3 жыл бұрын

YES!!!!!!!! FINALLY SOMEONE NOTICED🤣😂🤣😂🤣😂👍🔥🔥👊 That mistake was corrected AND new glasses are on the way

@andreaskassner3320

3 жыл бұрын

@@rcguygarage "That mistake was corrected AND new glasses are on the way" LOL ^^

I like to changes you made to the videos 👍👍

@rcguygarage

3 жыл бұрын

Thanks!!!! Some people are already complaining they dont 🤣🤣😜👍💯👊

Everywhere I read it says to use ~3,000-7,000 silicone oil for the center dif. I'm new to RC so im not sure what to use. My differential keeps going out though and seems to leak all the fluid out. What am I doing wrong? And you said you used 500,000 weight fluid, can you explain please?

@rcguygarage

2 жыл бұрын

For the size tire I use and how I drive the RC the thicker center diff fluid puts more power to the rear wheels and makes better use of the battery packs time usage.

Are all those shims stock or did you add some?

@rcguygarage

9 ай бұрын

Not sure video was too long ago

The metal spur gear is too heavy and seems to come off the main gear box easier, may need a stronger locktite

Hello brother.. see closer 26:26... That inner gear "square" washer on one side is not sitting right.. I think the square washer slide out of that when you try to fit the other side. Please take a look

@rcguygarage

3 жыл бұрын

YES!!!!!! You are number 2 to have actually noticed!!!!!! Side note this could have been edited out but I'm seeing who's actually REALLY watching🤣😂🤣😂. I did notice off camera and A NEW PAIR OF GLASSES are already on the way!

@smitheshn6637

3 жыл бұрын

@@rcguygarage Good you noticed.. otherwise all that hard work.. My God!!

@rcguygarage

3 жыл бұрын

@@smitheshn6637 RIGHT like I said I could have DITED that part out 😉

@rcguygarage

3 жыл бұрын

I do appreciate the watchful eye though dont get me WRONG Im NOT --->TAHT

#LUCKY..#LuckContinues...#BreastCancerAwareness...I don't like the echo the best ever but this time the echo was perfect..great job

Why is R2D2 in the background?

so whats the difference between the Vitavon and Hot Racing parts besides the price

@rcguygarage

3 жыл бұрын

Supposedly the quality of materials used and where they are manufactured

@trimmin420

3 жыл бұрын

@@rcguygarage okay when you use the word Supposedly thats code for i see no difference between quality just asking price. IE you dont always get more just because the price is higher

@rcguygarage

3 жыл бұрын

Honestly quality of materials is unknown similar to taking your vehicle to jiffy lube

When you say that its more precision ❓ You mean off the record its made more precise than the cheaper Arrma Exb ones 🤔🤣😂🤣

@rcguygarage

3 жыл бұрын

I just mean the quality appears nice and the tolerances are really tight. Remember I'm saying what I'm thinking in the moment.

what is that robotic voice thing in the background? or am i going nuts?

@bran0nbalwin173

3 жыл бұрын

Yea what is that??!! I see a little robot thing roaming around in the background. want to know what that is...lol im sure its somewhere in the comments

@fhforbes

3 жыл бұрын

cozmo toy robots.

Missed one small piece inside the diff it’s in the wrong spot please don’t drive it until you look inside the diff. Oh this was 2 months ago. Probably already done.

Great video. Please, for the love of god, turn your robot off. So annoying.