Really honest and objective review finally.

Love these watches, they pull of the vintage dive look so well! I love watches with large crowns, really nice design.

Another excellent review, thank you Oleg. I must say, I have never found the Miyota movements to be noisy or wobbly while wearing a watch. The benefit of the higher beat movement is preferred, imo. The finishing on the hands is a deal breaker for me, however. I will continue to save my money for the BB58.

nice video. I like the fact that you are unbiased and not hyped the brand which in all honestly it is a good brand but not as many people are portraying it to be.

I decided to go for a black and white Neptune V3 as soon as they were released it’s bean around 3 months already, and I love it! Sadly I noticed the rough edges on the hands, and the rotor is loud, i don’t think that others can hear it very well but it’s definitely there, I never faced any issues with my clasp either. Overall I’m glad that I bought that watch as my first automatic.

A beautiful looking timepiece. I could put up with its drawbacks for the price. I've just been looking at the Falcon from Lorier for $500 , another great piece. Cheers Oleg and my regards to Mr Bond.

A very fair review of a popular micro brand, Oleg. The points about the hand finishing is valid from the pictures shown. That movement is loud but it’s not something they produce so have no control over. Though they could opt for a quieter hi-beat? I think $500 is pricey. With the customs duty to pay out on top its actually bordering on expensive. Nevertheless it really holds its own next to that BB58 - a watch I love.

Great video and informative review. I like the look of this watch. Thanks for showing it.

Just got mine a few weeks ago. So far I gotta say it was worth the wait and definitely worth the money. Wears light for a bracelet. I can wear it to work as well as with jeans and a baseball cap. The sound of the rotor is louder than my other automatics but not as loud as it appears on the video. The mic really hightens the sound. I will never spend the amount of money 💰 that the BlackBay 58 asks for so yes this is a great alternative at a huge discount. I do worry about it's durability. Time will tell on that. And yes I did notice the rough edges on the hands after watching this video. Not too too bad but yes if you look close enough you can see it. I have the black & gold gilt.

I love mine, I have the blue gilt version and it just looks great with pretty much any outfit. I don't mind the plexi as I have my grandfather's watch that is from the 1960's with the original plexi and its great. what I do mind is the clasp doesn't fully lock when you think it does, u have to press it hard because sometimes it makes a clack noise but it wasn't enough to close completely.

Finally a good objective review of a micro brand. Awesome vid

Hey Mr. Oleg. Hey Mr. Bond. I have always had one eye on this watch too. However, I have the 'vintage diver' look covered in my collection so haven't been trying to get hold of one. What I did want to say is this: I am really liking how the industry is circling back to some smaller diameters, especially when the lug to lug is 46mm or more. I have an 8" wrist but can wear a 36mm piece easily as long as the lug to lug is long enough to give the piece its presence. That more streamlined smaller diameter longer lugs look is so much more timeless and elegant. In regards to the mov't : I have the 90s5 in my Tisell Explorer copy and it's nowhere near as noisy. Sure I can hear it if I hold the watch close to my head, but not like how you can hear the Lorier in your review. No wobble either from the Tisell. I think overall the 9 series Miyotas are good. I know that Time Factors chose them over an ETA 2824-2 for a number of Smiths pieces due to a far smaller failure rate and better performance statistically. And those hands are unacceptable IMO, unless you are talking about a sub $100 Chinese piece. You just can't scrimp on a hand set, the one thing you look at closely every time the watch is on wrist. Cheers Oleg. Great review again mate.

I just picked up the gilt dial black version, I had to buy a used one because like you said, they are sold out with in minutes every time the release a new batch. I absolutely love mine and the plexi glass gives it a vintage feel with distortion that you just don't get with saphire. I like your point on the blue dial being 2 in 1. It really does seem to be two different watches in dark and light conditions. Great review

I have a Tisell with the same movement, I'm hard of hearing so the rotor noise doesn't matter. A little vibration on the wrist let's me know it's there. And it keeps awesome time. Win, Win. Thanks for the review, definitely sold on this watch.

Great review. I have a falcon II and I don't find the movement as loud and my hands are finished nicely. Makes me wonder if there's a QC issue with the one you had.

I like the watch been looking at it for awhile , I think it looks as good as the Tudor !

Great video Oleg. And even better to point out about the hands finishing (yup. that was bit rough finish..) and clasp matter. The watch is very clean. I meant the layout and design aspects. Sharp looking and generally very well done. As for $500 price tag, Yes, it is pushing the envelope, but there are many other microbrands with NH35 movements with that price range, so it is not that high, IMO. Cool & super cleaning lookin watch. Oleg. thanks for an awesome review.

Really nice. If they had made the Neptune 3 with a date window, I would have picked one up some weeks ago... Aside from that missing part, everything else seems perfect.

Absolutely love the watch! I wish it was closer to the $400. That said, I love to get my hands on one. Thank you for a great review Oleg 👏🙏👍

I have 4 watches with the Miyota 9015 and none of them are as loud as the one in the video. Also, 3 of them are actually running +2 sec and are more accurate than my watches with 2824-2 and SW200. Saying a 2824-2/SW200 is more accurate than a Miyota 9015 is...well, inaccurate. A Miyota 9015 is also calibrated in four positions whereas a standard ETA 2824-2 is only calibrated in two - the tolerances are also almost the same.

@MarcraM82

3 жыл бұрын

Agree, he seems to hugely dislike Miyota's. I have a Miyota 9 series, seiko 4s, 7s and 6R15 series, a Selita. also a few ETAs. The miyota is most accurate just behind the ETA. He actually fails to acknowledge the positives about the miyota 9 series. It's thinness is a technological feat compared to all other Japanese movements in this price range which are a lot thicker Has a 42 hour power reserve vs 38 Selita.. Beats at a smooth 28800 which i'll take any day over a seiko with a slower disjointed beat. In regards to the rotor noise, its more apparent on this watch probably due to the fact the case is less than 12mm thin. He also fails to acknowledge that the 9 series rotor winds uni-directional, but spins bi-directional hence why its makes that mechanical spinning noise which really is a feature, not a problem considering you are getting such an accurate, thin smooth sweeping movement. It DOES not SPIN so aggressively and loud unless you shake it like he's doing. In normal wearing you barely notice it move only on certain wrist movements with a lot of force.

@mrdisco99

3 жыл бұрын

I know lots of people like the Miyota 9015, and it is a pretty great movement for the money. However suggesting it’s a better performer than ETA is a bit silly. I have both and I’d rank the 9015 in between the Seiko 6R15 and an ETA 2824. My 9015 has some positional variance (5 to 10 spd range) and best amplitude is around 270. None of my ETAs have numbers like that. On wrist it’s a pretty good performer, and more consistent than my Seikos, but I also agree that the rotor noise and vibration can be distracting, which is never the case with my Seikos or ETAs.

@flow2tech

3 жыл бұрын

@@mrdisco99 my 9015 blows my 2824s outta the water in regards to accuracy.... Thats just my own scenario tho..

@jmount411

3 жыл бұрын

I have a watch with Miyota 9015. In regards to the ETA and sellita movement watches i own from Sinn, Tudor, hamilton, and the seiko movements. I think the 9015 is extremely underrated. I only own 1 example of the 9015 but its -2 to -5 spd consistently. Its very thin even in a 300 meter water resistant case. I think it's very underrated and a solid performer. Yes my in house movements from tudor, rolex, and Breitling blow it out of the water but that's not comparing apples to apples. Honestly the 9015 in a dive watch is a good thing because you can have a thinner case and the same water resistance. And i don't understand how rotor noise annoys people who enjoy mechanical and automatic watches. It lets you know the watch is alive and is a mechanical object.

@Billeh556

3 жыл бұрын

I’ll chime in since this is my watch he’s reviewing- I’ve owned/own a number of watches with this movement, but it is loud AF. And you don’t have to do sudden movements like he’s doing in the video, I hear it going all the time on barely anything. My thoughts- the rotor is slightly looser than maybe it should have been thus the reason it seemingly spins more freely and easy than any other 9xxx movements I’ve experienced.

Enjoy your videos as always!! I recieved this watch for my birthday and I have to say, I am VERY PLEASED! I didn't know the noisy roter was a thing until I saw this video.I don't know if the Ortgas took your suggestion about the roter and fix it, but mine is very silent. I have to shake it then quickly put my ear to the caseback to barely hear it spin. Perhaps it's just the one you had? As for the quality of the hands, while my eyesight isn't the greatest, with glasses, they look immaculate. I took a zoomed in shot with my phone in sunlight and the guilted hands still look amazing. I am extremely please with My Neptune and plan on doing some snorkeling with it in a couple weeks to make some new memories with it and my family.

My pick for a BB58 alternative is the Mido Ocean Star Tribute available with blue or black dial. It has a great vintage vibe on an amazing and uniquer bracelet. For just under $1000 USD it makes me smile every time I put it on. I also have the BB58 in black which really makes me smile but is it worth the extra cash?

Hi.. could you please make a video comparing the new Seiko 62 re issue and the BB58.. the resemblance is pretty close, just for fun thank you

This is maybe one of the best good looking micro brand. But like you've said the price is a bit high. But love the watch. Nice review again 👍😊😊

Oleg, maybe you left some of the protective transparent plastic stickers on the clasp's scissors, and hence you have to push it harder in order to lock it safely. Thanks for this yet another great review!

@Billeh556

3 жыл бұрын

Trogpo wow you’re absolutely right- I just checked and the plastic is still there! Works perfectly now, thank you.

I just can't seem to pull the trigger because the distortion bothers me for some reason. I got the v2 last year returned it, the distortion was WAY OFF and I emailed lorier about it. they seemed to have addressed it on this version but still looks a bit way off to me idk maybe its just my extreme OCD. but great review thanks for taking the time to do one

Just got the Series IV, amazing piece of a watch !

At first glance at your shots I had difficulties to distinguish between the hour and the minute hand. It's sometimes confusing because of the arrowhand. Seiko does it the other way.

@biomez

3 жыл бұрын

dude SAME i thought i was the only one who had this issue haha, i own one and always confuse the minute and hour hands with my skx

i have a miyota 8203 running at -2 sec/day, my sellita sw200 runs at +15 sec/day.

Have the Neptune (black/gilt) bought it last year. A very cool charming piece (paid $400). I'm a SKX fan and at least Lorier figured out a how to engineer a smooth screw down crown, lol. I tend to not overanalyze most of my watches, so I leaned a lot from you on this one. I don't care for most Micro brands, but Seiko should take some design cues from them on their new boring line of Divers.

I realize they’re slightly different, but how do you like this in comparison to your Axios Flagship? They seem to both have vintage cases and use similar movements.

Hey man! Love your channel! I have a question though, can you let me know where I can find similar watch pillows like yours? (Or the watch case that you use?) I would be grateful if you let me know! Thank you and keep up the great work!

Absolutely fantastic looking watch...getting one ASAP!

It is a gorgeus watch but the price has to be considered. Specially when you apply tax duties in Europe. I own a Lorier from the first gen. (second hand) and very happy with it.

@alessiocasto4240

3 жыл бұрын

If you remember, How much taxes did you pay?

@_jm77_josem.69

3 жыл бұрын

@@alessiocasto4240 Sure. I paid +-90 euros, on a FedEx invoice.

@alessiocasto4240

3 жыл бұрын

@@_jm77_josem.69 thank you very much

@mariog7213

2 жыл бұрын

That's something I have to consider when buying European watches like Christopher ward or yema

Yep, reasonable review. I have a Black and Gilt Series Three which arrived a couple of months ago. I absolutely love this watch! Yep, if you look on their website you'll be met with "Sold Out" but Lorier is a microbrand; they make their watches in two or three batches a year. Just join their waiting list; it's worth it. P.S. You can hear the rotor spinning? Was your father a bat? Joking aside, l've been wearing this watch for two months and l don't think l've ever heard the rotor. It's no louder than my Omega Seamaster 300m... Also, l had a look at the hands on mine through a loupe and they're fine. Could just be your review example?

I own Lorier's Falcon Series 2, which has the same type of hands as the Neptune. Luckily for me, I don't have any bad finishing on the edges on my hands, but then again, my hands are gilt, so bad finishing may not be as easily visible. Regardless, upon closer look, the hands look flawless on mine. It is a shame and surprising to see the bad finishing on the Neptune you featured.

Nice review! I picked one up and enjoy it.

That lorier is the best looking micro brand piece imo. Somewhere between a 1957 seamaster and a Tudor sub from the 90s

I’ve spoken with one other watch manufacturer about Lorier and Lorier themselves (and their preference for plexiglass). Lorier said it costs too much to get the contour of the crystal to be a “vintage style”. But the other manufacturer said it doesn’t. So I’ve kind of steered away from Lorier’s watches because of their design choices and suspicion that they aren’t telling the whole truth, or that they prioritize cost savings over the customer’s values. Although they are aesthetically pleasing.

@mrbrisvegas2

3 жыл бұрын

Most 'microbrand' watches are really just 'copy watches' with a custom printed dial and engraved back. They just use whatever parts (cases, hands, bracelets) are lying around to save money.

Interesting watch, nice bracelet, great size, but not a fan of the numeral font on the bezel

Guys can you suggest cheaper version of this watch ? In the range of max 150gr and case 39-41mm. Thanks

Question for people that own this Watch. Is the automatic movement too loud? It seems really loud. I’m considering investing in the watch, but that might be a dealbreaker for me.

Great honest review. Agree it would be much better with a Sellita or better yet an ETA . And yes a sapphire crystal.

I have a microbrand with Miyota 9015 and I don't mind a little bit sound and swirl. It reminds me the watch is mechanical object. Don't you have a watch with chronograph Valjoux 7750 movement? How is the noise there? And how is it priced? The advantage of these Miyotas is you don't have to service them every 5-7 years like Sellitas and ETAs. Miyotas 9series out of the box are regulated in 5 positions and Sellitas are in 3 positions. I would take Miyota 9015 out of the box every time over Sellita SW 200 out of the box. And my 9015 out of box is running +4 seconds per day.

Oh man, should I get the blue or the black? That is the only real question for me.

I love my Lorier Neptune v2 in guilt! Can't recommend enough

@randsp3c709

3 жыл бұрын

Is the 3 any different?

I just got my Falcon 2 so I’m watching Lorier videos. Your rotor was really loud! Mine has the same movement but I can’t even hear it.

also, can't help but notice this watch is a combination of Omega Seamaster (hands and bezel) and Tudor black bay (dial and hour marks).

Oleg I’m starting to wonder if you’ve planted a GPS on me?🤔 I only ordered this just on 2 weeks ago!😱 I actually went for the blue/gilt model after much deliberation between this & the black/gilt. I agree there’s something quite alluring about the blue dial. Hence I couldn’t understand why these were still available! Anyway I’m a happy boy! I think Lorier have nailed aesthetically the vintage look & cant wait for mine to arrive here “Down Under” 🇦🇺 👍🏻😎 I’ll let you know when I get mine😊 PS!!!! I just received my Lorier 3 an hour ago, Australian time! It’s stunning!!!😍🤤😍🤤

Where did you get your shirt?

Hi! is the rotor really noisy?

I think they must get the dials made in the same factory as Baltic. I had the Aquascaphe and literally had to pass it through a meatgrinder to squeeze any blue out of it. But I love Lorier as a company.

Awesome watch! I have two Hydra II's

Can you notice the bad hand finishing with the naked eye? If it’s only under macro I don’t think I would mind.

@Billeh556

3 жыл бұрын

Keith Early only under Macro.

Oleg, great video as usual, despite the lack of *VERTIGO ALERT* lol :)

Always liked this watch and had the chance to by a pre-owned one. However the plexi-glass put me off and a few other of its other niggles makes me quite glad I did not. Still looks great though.

how about the lume?

I have the neptune V2 Gilt/black version and can agree with the hands. The hands are easily the watches weakest point. The finishing and hand design could be much better. Other than that it is a beautiful watch. The Bracelet is awesome, clasp is a bit mehhh.... Please review the Steinhart 39mm OVM. I picked one up and for the money it is amazing quality, even though it is a homage.

Where's your bb58 blue? How can you say they look very similar without even having it in hand

One huge problem.... you just can't find any for sale. Any ideas ?

My version 3 is as quiet as a mouse. Good review though. 28000 bph and the design. $500 is good value IMO

I have the V3 blue gilt and love it tbh. The plexi was a concern initially but I love the distortions it gives off. As for the rotor noise I may be a little unique in that I actually like hearing it which tbh isn’t that often anyway. Something about hearing it makes me know I have a mechanical watch on my wrist. I did have the same issues with the clasp but realized if I push in the two clasp pushers when putting it on it fixed the issue. Thanks for the video!

It was the lack of sapphire crystal that stopped me from getting one. Baltic aquascape is a great alternative & beautiful in my opinion.

@the_9ent

3 жыл бұрын

Love the look and feel of the Baltic but it’s several hundred more :(

Ironically I’ve owned the blue version for a few months now and I’m saving for BB58.

Fantastic to see an honest and objective review rather than the usual fanboy over the top praise BS.

So many microbrands at this price have bad edges like that on their hands (usually hour and minute)... It's a real shame, but it seems like a pervasive problem with whichever supplier is manufacturing handsets for all these microbrands...

@MrOstefar

3 жыл бұрын

It is VERY noticable on this watch unfortunately, besides that I really like the watch. I would prefer a sapphire, but acrylic is next best thing. Some microbrands use laser edged hands, which are generally much better, but they can have quality control issues too. Grind that buckle a little bit too, and version 4 could be perfect.

For some reason, Oleg's wrist shot always makes my head spin...

@sobeit712

3 жыл бұрын

I can't help but worry that one of these day it's either his watch or camera gonna drop down

I love the channel, great reviews. The watch, I wish they offered a sapphire option. While I like the acrylic crystals on some watches, like a Vostok, I think at this price point you are buying for longevity and sapphire would be the way to go. Its the only reason I have not already picked one of these up. Also I find it unfair to call watches that are many orders of magnitude apart in price, alternatives. An alternative by nature can go either way and I don't see a lot of Neptune buyers thinking the BB58 is an alternative. A friendly criticism you can feel free to ignore, that's just me.

@MarcraM82

3 жыл бұрын

Agree! i personally prefer acrylic/plexi and would choose that option over sapphire for this watch, but i do acknowledge your point and a lot of people prefer sapphire. I think the V4 Neptune they will probably offer sapphire or plexi and possibly a date at 6 o'clock position. That way attracting more sales.

Hi, great review, thanks, just wandering why comparing it to the bb58, i think it is closer to the omega seamaster 300. But find it great, would prefer saphir cristal too. Agree with you, 500 is too much for the movement proposal.

@randomocityvideos

3 жыл бұрын

Almost exact same dimensions as BB58, similar colorway options, no crown guards, and a similar bezel shape. I'm not seeing much Seamaster personally.

@randomocityvideos

3 жыл бұрын

@@johnmuthan286 Okay I see where you're coming from there

Overall it looks better than the BB58. The hands are a bit confusing though, the lume stops almost at the same point, and the arrow is on the wrong hand.

@davidb9531

3 жыл бұрын

You need to squint harder bro

Looks great.

I have viewed a bunch of Lorier reviews _ But here i found out something that i have not come across - the indicators are painted on _ i don't know how common or uncommon this is_ it has been a very long time since i have had a watch _ but it is good to know as i was thinking of asking the owners _ nice to compare to the much more expensive Tudor and Lorier looks better from every angle, to me. . . :>/

Looks awesome, but the hands look like they're the same length from certain angles. Weird.

I see Lorier - I hit like

I agree on the price being a tad too high. I think $399 would have been more appropriate.

The 9 a clock and 3 a clock seem to be off on this watch

I like their choice of movement, but the rough finishing on the hands is a turnoff

Its perfect aside from the crown, too big for me. Nice video

12:05 My God that’s a loud movement! I thought the BB58 wore a bit small on my wrist. If the Lorier wears *smaller* then I would pass.

@jaysterling26

3 жыл бұрын

I've read comments about this movement bring loud , but blimey I could use that as an alarm. One channel extoling the viruses of this watch seems to have glean over this. Why not offer a version with sapphire & let the customers decide? I understand the aesthetic , but I think pride is standing in the way of practabity ( I don't want to keep polishing the watch & be mindful of my arm movement) & profit. Shame.

@the_9ent

3 жыл бұрын

Jay Sterling Agree. If the glass was sapphire it would justify the price point imo

I have a Lorier Neptune II that I wear as I write this. It does not have those issues with the hands. Go figure.

....”what do I think? Am I disappointed, am I impressed?” 🥁 Am I going to return it to Chris???😂

It’s a homage of a Tudor/Seiko. The hand are a Frankin skx hand lol.

I don't get why people compare this watch to a Tudor. The case shape is nicer, even though the lugs are prohibitively long looking, I'm assuming it'll not look nice on leather due to a long lug gap. If I'm wrong about that, please enlighten me. But no, this watch doesn't remind me of a BB58 at all. I can envision it as a poor man's SPB143, or an even Poorer man's Oris Sixty Five. The triangles on the dial do remind me more of old-timey Alpinists or the Kontiki's of yore though.

This would be my next purchase if it had Sapphire with a 300$ price tag

Hi Oleg I have to disagree with you on this one, I think that this watch takes most of its DNA from the Omega Seamaster 300. Thanks for the entertainment

"They say that the acrylic crystal is more expensive than an equivalent sapphire one." My first thought: quick, let someone send a note to Vostok! On second thought: Vostok has been making everything in house for over 50 years and on a very high production, so their production costs might be really down, while buying a small batch of bespoke acrylic crystals, which are quite out of fashion, might be expensive. Who knows? Anyway, a nice watch, apart from the badly finished handsets (personally, I don't like the hands shape, but that's my personal taste). All in all, if you like the watch and you are going to keep it in the long run, the price is maybe a bit high but not unreasonable.

@Billeh556

3 жыл бұрын

It costed them more to use acrylic to keep the water resistance to 200m- case needed tighter tolerances.

@andrei-cosmin.popa85

3 жыл бұрын

Ignorant decision, imo. I will never buy (again) a watch with plastic instead of saphire, unless I intend to keep it in a box.

@williamsipe1151

3 жыл бұрын

@@Billeh556 , and yet Vostok manages to make watches with acrylic crystal, 200 m of water resistance, and in-house movements for a fifth of the price.

@Billeh556

3 жыл бұрын

andrei-cosmin popa 😤😤😤

@Billeh556

3 жыл бұрын

william sipe really dude lol Vostok are awesome cause they are junk and cheap. This is trying to be neither, clearly, so I don’t get your comparison but ok.

The case and bracelet look a lot like early Speedmasters.

I don’t care what they say about acrylic, I want a sapphire option at $500. Also the case back is a bit cheap. There are higher quality micros at $500. But Lorier has the design right at least

I really don't think that is a black bay homage. Sorry, Plexiglass is not for me. I have 4 watches with the Miyota 9015 movement, and it's excellent. They aren't normally that noisy. That said, for a similar price I prefer the PT5000. The watch is to expensive in my experience

Now is the time to step up your camera game. The lighting and video quality is NOT good when zoomed especially.

gorgeous looking watch but for 500$ thats pushing it. Imo 500$ is swiss territory and for 650$ you can easily get a cward c60 when they're on sale.. Hell i got my mido oceanstar for 420$.

Thank you for the unbiased review. I was very interested in this company for the longest while but became frustrated by their products being sold out when I was ready to buy. A dozen watch purchases later, I have developed my requirements of a watch brand to include availability of the product. Also, that miyota movement sounds much louder than the ones I have.

@TheChadWork2001

3 жыл бұрын

I agree. No Rolex waiting lines. Being available for purchase is certainly a requirement, and accuracy is just as important as the look. I was getting good looking watches but they weren't accurate. They must be +-2 or better, and Tudor meets that requirement for me.

@user-go9tc3cw4b

3 жыл бұрын

I personally really dislike their lack of popular colours. This is especially evident on the Falcon line. It's crazy that they don't offer a simple black dial option. Ik they have a gilt version. But the classic black and white is easily the most popular dial colourway.

Not a massive fan of the hands but like everything else about the watch

I respect Lorier's urge to do proper retro flair with acrylic, wanting to follow the historical cache of Hesalite. This Neptune arguably misses out on neo-retro style (beautiful distortions from the crystal) and lands in throwback territory (use of outmoded materials). I can accept 'just use some poly watch' for Vostok Classic offerings or the Timex Q line in part because those are 60s-70s products that happen to be made here & now and don't cost 500$. An Omega moonwatch, this is not.

Hi Oleg, I really don't know what to say about this brand Lorier because I hardly have seen the name come up anywhere and the only other one I saw had the reviewer bashing the watch, calling it overpriced garbage. It is worth about 200 dollars not 500 was mentioned. Also a very noisy watch rotor. The quality was not very good. This is not from me but just what I can remember someone else reviewing this from someone who senf it in, not the watch company itself.

@the_9ent

3 жыл бұрын

Interesting. Who was the reviewer? On KZread?

@scottsj4625

3 жыл бұрын

@@the_9ent When I get some time I will try to find the video. I subscribed to too many watch channels. Like 30 of them for my love for watches but I need to cut that to be less than half. I really don't remember who did it. I will take a look through my subscriptions and see if it is there. Sorry, I can't remember.

Worth $500?

It annoys me that an inexpensive Microbrand can have better QC and bezel action than +$1000 pieces from the manufacturing powerhouse that is Seiko!

Me: Wonder what nationality he is... 24: "Hey friends!" Me:"Yes!"

Thanks Oleg - finally someone admits to being ( accidently) clumsy with their watches. Welcome to the KWK- the klutz watch klub member 02.

I couldn't live with the hands especially the hour hand. It's not exactly a value proposition, either.