Everyone - I can confirm that this fix works! For the past 2 years, I have been dealing with this "Audio fading / Distorted Audio" issue on the G933 due to what I believed was a faulty power button. I've disassembled several G933s in the past with other DIY solutions, which did not work. Turns out, all Logitech needed to do was include contact cleaner as part of their manufacturing process, and none of us would have had this issue to begin with! I personally was a bit skeptical that this would work, because it's just a spray that you apply and it's supposed to magically fix the problem. However, after 2 years and no hope from Logitech, I'm rather desperate and thought "Egh, it's just going to cost me $7 and 45min"; and this was time and money well spent! Results: This is a 100% solution, there is not even the slightest fading or distortion from the power button after applying the fix. The drums on both ears receive 100% power, and the audio is robust as soon as the headset is powered on. There's no more playing with the power button trying to get the sound "just right". What you need to do: Since we don't have "Mundial Prime - Limpa Contato" in the United States, the contact cleaner that I purchased was WD-40 (Link Below) at Home Depot (Link Below) and it cost me $6.97 WD-40 Electrical Contact Cleaner: www.wd40.com/products/contact-cleaner/ Where to buy: www.homedepot.com/p/WD-40-SPECIALIST-11-oz-Contact-Cleaner-30055/307599950 I applaud "O Gambiarra DIYer" for figuring out how to fix the G933's issue when Logitech couldn't figure it out on their own product. Even more disappointed in Logitech since this is such a simple fix. Brother, Keep up the great work in Brazil!

@ogambiarradiyer507

3 жыл бұрын

Thanks for your words man! I appreciate it!

@KreezeTV

3 жыл бұрын

i didn't have any contact cleaner so i used regular wd40 and that worked!

@Anomalyy666

2 жыл бұрын

What is it called in canada and what type of screwdriver I need?

@Coachteach

Жыл бұрын

same here man, justt fixed mine, thx so much for uploading the video dude!

I had this problem many months ago (I think even over a year ago) and I followed this video. I haven't had any problem since then.

Thank you so much, been having this issue for a long time and kept moving the power switch till it sounded right. Came across this video and it works perfectly now. Thanks again!!!

@ogambiarradiyer507

4 жыл бұрын

That's great!

@a.j.busheyjr.8671

4 жыл бұрын

Thank you for this! I used a couple squirts of WD-40 right on the sides of the power button (don't go crazy with the spray) without taking the headset apart. Worked great for me. Just wash the outside of the headset with mild soap/water (DAMP CLOTH!) to clean up the WD-40 smell.

Perfect video. No fussing around, no time wasted. It went straight at the heart of the problem and helped me from buying another headset all together. Thanks man, i really appreciated this!

@ogambiarradiyer507

4 жыл бұрын

Thanks for your collaboration! I'm glad to know that works for you.

Thankyou so much, perfectly works now! Just for anyone reading, i was hesitant in removing the circuit board and did not watch to break any clips and i did realise that you do not need to remove it entirely. He did that in this video for demonstration but you can sneak in the contact cleaner spray without removing the whole board. Lastly, the screws that you remove are magnetic so be careful with them as they can get lost very easily.

@ogambiarradiyer507

4 жыл бұрын

Thanks for the feedback dude!

I had this wacky audio problem since 1 year and was thinking of changing my headset entirely, and I have by no means any idea of fixing technical stuff. And then I came across this video and gave it a try. And see: it works! Never thought, but it works! One click, turning the headset on and its like how it was! Thanks a lot dude!

Very helpful. I can see the point of removing the flat cable, for visual purposes, but it's not necessary: you can just press back the clear plastic tab at the centre of the circuit board to free it (the board is held in place by two posts and the tab, and the black plastic cover adds two more screws to keep it in place. Also, the problem might not be remedied by contact cleaner alone, especially if the switch is loose. On the box that holds the switch in the circuit board you will see as gold metal strip covered with a bit of plastic. That metal strip has a bump in the middle--it makes the click when you switch and holds it to one side or the other (on/off). That metal strip is very thin, too thin for its purpose, and slowly gets bent outward so that the switch no longer presses against the contacts consistently and properly. Use a small flat head screwdriver, or similar object, and GENTLY press that strip down toward the strip; you shouldn't really see any press marks in that plastic switch. Test the switch to see if it's tighter. If it is, then reassemble, making sure that you line up the switch on the circuit board with the external switch or you will have to take the cover off again and line them up and feel like a doofus (as I did). For another explanation of this issue, see the reddit link mentioned in the comments below (reddit post: www.reddit.com/r/LogitechG/comments/7t0m3g/g933_sound_unbalanced_power_button_fixes/).

@ogambiarradiyer507

4 жыл бұрын

Thanks man for the MASTER fix! Very useful!

@viktorlaxson3832

4 жыл бұрын

THANK YOU. I had no idea what the reddit post meant about the gold thingy but now i finally solved it. Its been muffling the right and left ear for a year and now it just finally works! I had to glue gun the entire board but it seems to work now

@ogambiarradiyer507

4 жыл бұрын

@@viktorlaxson3832 that's great, thanks for the feedback!

@ViniTheCrazzy

4 жыл бұрын

my case is just this... the on off is loose and lust apply some contact cleaner... i not expecialize about eletronics and the most advanced stuff i did is put all pc parts together, this is like a hell that cost one month of paycheck to fix... i totally not want a hard time... your link, know if someone make video about this fix? is easier to no fuck up by the content i read

@jonathannoel3534

3 жыл бұрын

Had this issue exactly. Thank you!

Thank you so much my friend had this issue for the better part of a year and couldn’t find a good video until now.

@ogambiarradiyer507

4 жыл бұрын

That's great! Thanks for the feedback

Dude, you're a god. Thank you! Also wanted to note that I didn't unscrew or anything. I bought one of those sprays that has the little "straw" so that the spray doesn't shoot like crazy all over the place, so I just did both sides of the button without opening it at all and it worked. abraço

Thank SOOOOOOOOOOOOOOO much my friend!! You don't even can imagine the happyness that i feel right now! I was totally give up with this handset until today that i searched by this issue on KZread! I even sent an email to Logitech's support last year by this issue when i found that the problem was on the on-off switch and they decided, after several mails and answers, the warranty didn't cover me :(. Thank you soooo much again! Regards from Argentina!

My friend you just gained a new subscriber. i noticed that the on and off switch wasn't fully attached to the outer cover and simply just pushed it back into place and it solved this issue! Thank you

@ogambiarradiyer507

4 жыл бұрын

That's great! I'm glad to know it!

I've literally had this issue for a few months now and can say that THIS REALLY DID WORK. Awesome video man and thanks for saving me $100 on a new headset!

@ogambiarradiyer507

4 жыл бұрын

That's Great! I'm really happy to hear it!

I'm looking for this for so long man, i've tried to many methods. You are my savior, working like a champ. And i don't need to mess up with my power switch anymore

@ogambiarradiyer507

4 жыл бұрын

I'm very happy to hear that! Thanks for the feedback.

Worked! I was almost retiring it definitively... The only shit was when I left a screw fall into the magnetic.. it was a pain to get it back! Thanks man, My 4 years old G933 is working like brand new!

Thank you so much! All I saw was a redditpost about this problem and there was one guy who explained how to fix it. He did almost everything as you did besides you used contact cleaner. The guy just said that you needed the push on the metal part on the switch. It also worked but it was just temporary. This really helped me out, I was worried I had to live with it forever. Btw here is the reddit post: www.reddit.com/r/LogitechG/comments/7t0m3g/g933_sound_unbalanced_power_button_fixes/

@ogambiarradiyer507

4 жыл бұрын

Thanks for the feedback! That's great!

I repaired my headset with this, working perfect. Thank you so much!!! I already thougt ... 1 1/2 years not usable any more :(. First it did not work and only showed red blinking lights. I took the battery out and in again and it worked!

Thank you so much! Was looking at buying a replacement and stopped to wonder if this was an issue I could resolve myself.

@ogambiarradiyer507

4 жыл бұрын

That's great! DIYer spirit!

This fix worked for me on my 935, will try to remember to comment on how it lasts, but I didn't even have to disassemble as much as the video. Just took apart enough to tip the end of the board with the power switch out and sprayed some cleaner in and worked it into the switch like the video showed. Thanks for the video, huge relief to be rid of the fading audio.

Thank you so much man, I've had this problem for like 6 months and have been looking for a solution and this worked wonders!

@ogambiarradiyer507

4 жыл бұрын

That's great! Thanks for feedback!

Thanks mate, you are a life saver. Was sceptical at first, didn't think it would work. Such a simple solution...

OMG it worked. I was actually thinking my headset is damaged and I need to buy a new one. Thanks mate!

It works! Thank you man, I have finally fixed this problem after many months of trouble and not able to find a solution. They work as new.

@ogambiarradiyer507

4 жыл бұрын

Your feedback is very important! That's awesome!

To com esse problema há meses. Muito obrigado!! Está completamente resolvido agora. É um problema, definitivamente, bem irritante. Só é bom deixar claro que não é necessário tirar a placa toda, basta usar o spray pelo cantinho, assim corre menos risco de quebrar algo.

@ogambiarradiyer507

4 жыл бұрын

Que bom que resolveu ! Eu só retirei a placa para mostrar a origem de todo o pesadelo kkkkk

Thanks so much. Been dealing with this for over a year, now it's like brand new! FYI for anyone who wants to try this, it has to be contact cleaner, compressed air didn't work for me.

@ogambiarradiyer507

4 жыл бұрын

Thanks for the feedback!

@xxTacolord

4 жыл бұрын

I had this question. Did compressed air help at all, at least temporarily?

@ogambiarradiyer507

4 жыл бұрын

@@xxTacolord yes, I think it could help.

This problem was driving me nuts. I was just about to go and buy a new headset but this has fixed my problem! Thankyou.

@ogambiarradiyer507

3 жыл бұрын

That's awesome! Thanks for your feedback

Thanks, my g633 ins now working perfectly. This method actually works with my electric guitar switch too.

OMG, I used to think the cable was broken on the one side.... touching this button solved my issue! THANK YOU FOR MAKING THIS VIDEO

This worked for me also, thank you so much. One word of warning though about getting the PCBA back in and trying to fit it back over the volume dial; it is pretty tricky and requires a bit of trial and error to get it back in the right place.

Thank you! Tried this a couple of hours ago and after a lot of testing it seems to have fixed the problem. Took me 8 min to fix this annoying issue.

Tried it , bought the contactspray. Works Great, now doing my girlfriends headset (exact same model with same issue).

This man is so big brain, thanks for fixing my problem

@ogambiarradiyer507

4 жыл бұрын

Thanks for the feedback dude!

This video helped me resurrect my G933s today. THANK YOU.

I just used a compressed air can and sprayed it and it worked great, i didnt have or need contact cleaner. Thank you so much though because this video helped so much

@chadwilson2948

3 жыл бұрын

Compressed air worked for me as well. Thank you for the video and thank you for the comment.

This worked for me! Was super easy, just put a drop of IPA and worked the switch back n forth. No more fiddling with the power switch until the sound works correctly! Thanks!!!

@ogambiarradiyer507

3 жыл бұрын

Thanks for your feedback!

WOW, thank you for this. Longtime issue FIXED!

@ogambiarradiyer507

4 жыл бұрын

That's great! Glad to hear it!

Llevo muchísimo tiempo con este problema y gracias a ti he podido solucionar el problema. El caso es que cada vez que encendía los cascos se escuchaba mal o hacia cosas raras y con este video lo he podido solucionar. Muchísimas gracias!!!

I just submerged my switch in a layer of isopropyl alcohol (99.99%) and flicked the switch a bunch of times. Paper towel against it to help dry it out, and works like a charm. Tried it on both of my headsets, both have been fixed with it.

It actually works ^^ ... but make sure you guys are using contact cleaner for electrical components. Don't use contact cleaner for mechanical stuff !!!

@drywalleater9426

4 жыл бұрын

What brand did you use?

Thank you so much man. I've had this problem for a while now and you made a good tutorial. Great job

Perfect Perfect video! just sprayed CRC OD Contact cleaner on the power button and flipped it on and off a few times. Sprayed some more and flipped it on and off a few times again. Then pressed the metal plate of the power button down with a flat head 2-3 times to make sure its snug and reassembled. It's working 100% now. A cheap $10 fix that works 100%. After 3 months of playing with the power button because one side only worked or because the audio was too low. TLDR; Use contact cleaner on power button and flip it on and off several times. Do it a second time. Than press the metal plate of the power button down with a flat head screwdriver 2-3 times. PS. CRC OD Contact Cleaner is the best contact cleaner out there as it has lubricants to also help. More notes: Contact Cleaner is basically 80% rubbing alcohol mixed with equal amounts of water and is not necessary. You can make your own mix and put it in a bottle spray and use it. So basically 1 spoon of rubbing alcohol to 1 spoon of water. 1:1 ratio. The additional ingredients in contact cleaners are a gimmick. Still I bought it because of the supposed lubricants that say it helps, which probably doesn't do much but better safe than sorry so you don't have to re-open it again and do it again. More notes: You will probably have to do it every 6 months cuz logitech sucks ass. Enjoy.

Resolveu para mim, inclusive o meu botão de volume também estava com problema e o procedimento resolveu! Valeu mano, você vai para o céu!

Can confirm that this fix worked perfectly on my g933 headset. Thanks 😁

@ogambiarradiyer507

4 жыл бұрын

That's great!

Oh man thank you so much for this I will get that contact cleaner tomorrow and try this fix. This was bugging me for a year now.

@ogambiarradiyer507

4 жыл бұрын

Tell me the results!

Okay I’m actually pleasantly surprised by this. Despite looking a little sketchy this method actually does fix this specific problem. Just make absolute sure your headset power switch is the problem before actually buying the electrical contact cleaner. Also I used the WD40 Company 300554 Specialist Contact Cleaner Spray - 11 oz. with Smart Straw, found it on Amazon for pretty cheap and it worked as suggested.

Thank you for this fix. Was not sure, but tried it and it worked like a charm! THANK YOU!

@ogambiarradiyer507

4 жыл бұрын

That's great! Thanks for your feedback!

Inacreditável! Funcionou mesmo. Eu tava super incrédulo, só resolvi fazer pq li os comentários muita gente dizendo que deu certo. Obrigado

@ogambiarradiyer507

3 жыл бұрын

Que bom meu amigo! Obrigado pelo comentário

This video was a joy to watch, it solved my problem and gave me some solid laughs 😂👍🏼

this is the most helpful videos for this issue 100% works..! thank you

Muito bom!! Parabéns pela iniciativa, resolveu meu problema!!! Muito obrigado.

had no contact cleaner so i used wd40 like i saw on other post like your. and it worked perfectly , thank you ! so happy

@ogambiarradiyer507

4 жыл бұрын

That's great! Wd40 confirmed! You are the second one to tell me, thanks!

@goukisama

4 жыл бұрын

WD40 works just did it.

Worked like a charm! Thanks!

@ogambiarradiyer507

4 жыл бұрын

That's great! Thanks for your feedback!

Had the same issue. This fixed it. Thank you very much :D

@ogambiarradiyer507

4 жыл бұрын

That's great!

Worked for me, thanks a ton. Thing was driving me nuts!

@ogambiarradiyer507

3 жыл бұрын

Thanks for your feedback!

It worked instantly, video content perfect and straight forward, great work! Thanks so much!

This is great! I was able to fix mine. Thanks so much!

Meus parabéns pelo vídeo, resolveu meu problema, o Headset está perfeito novamente!

@ogambiarradiyer507

4 жыл бұрын

Que bom cara! Fico feliz em saber, abraço!

Valeu mesmo cara. Funcionou muito bem para mim. É uma vergonha um produto tão caro vir com essas falhas bobas. Gosto da Logitech do design e funcionalidades dos produtos mas por 3 vezes já tive problemas. Primeira vez com um mouse G700s. Tive que trocar a peça de contato do botão esquerdo que não respondia corretamente. Depois um teclado G910. Tive 3 deles. Comprei um e na garantia troquei duas vezes. No final comprei um HyperX. E agora com esse headset. Acho que sou insistente com a marca.

@ogambiarradiyer507

4 жыл бұрын

Que bom meu amigo! Cara a marca tem sim seus defeitos, mas a garantia deles é excepcional, muito respeito ao consumidor que aqui no Brasil é beeeeeeem difícil. Já tive problemas com alguns produtos mas sempre substituiram sem custos. Então sempre escolho a marca.

Works like Magic ! Thanks My Man !

@ogambiarradiyer507

4 жыл бұрын

😁 THAT'S AMAZING! I'm happy to hear that!

Thank you very much :) this was driving me nuts! appreciate it!

Thank you! My G933 is working again!

Very helpful and 100 % working tutorial! Thx a lot mate! :)

@ogambiarradiyer507

4 жыл бұрын

Thanks!

This worked for me too. Pretty happy with my new headset G933 that now thanks to this video works flawless :) However i dropped one screw in the speaker but i managed to get it out with skinny pliers and very tiny flat head screwdriver. Hope i did not rupture the membrane but so far it works great and the bass is pretty deep and crystal clear. No more power button audio distortion. :)

@ogambiarradiyer507

4 жыл бұрын

That's great! I had this screw problem too! It was a hell to get it out! Thanks for your feedback

Been experiencing this issue for a while now and decided to look for a way to fix it before I just go buy a new one... It looks like it worked so far! Thanks for the video!

@ogambiarradiyer507

3 жыл бұрын

Thanks for your feedback!

@qcsolidrock7750

3 жыл бұрын

So it's been 2 weeks since I tried this solution and the problem is back... Tomorrow I will try the alternate fix in kzread.info/dash/bejne/a6Zsra1sqdG5gaQ.html&ab_channel=IgorLacerda this video and will comment the results after.

Worked perfectly. Thank you so much.

@ogambiarradiyer507

4 жыл бұрын

That's awesome!

Awesome tutorial, thank you very much.

@ogambiarradiyer507

4 жыл бұрын

Thanks for your feedback!

You saved my life, thank you.

@ogambiarradiyer507

3 жыл бұрын

Thanks for your feedback!

Works great, pretty astounding.

omg thank you so much, i thought i'd have to buy new headphones

You're a lifesaver thank you so much, I did this and my headset sounds like the first day I bought it again, seriously though guys be careful with the screws, I had one that got stuck to the speaker and used some bent staples to fish it out

@ogambiarradiyer507

4 жыл бұрын

Thanks for your feedback! I had a screw stuck to the speaker too! I took long 20 minutes to get it out! Hahahahaaha

This video worked for me very well, thank you very much!

@ogambiarradiyer507

4 жыл бұрын

Valeu Caio!

Só um brasileiro pra conseguir esse feitos hahaha muito obrigado irmão, funcionou direitinho

Worked , so easy . Thanks !

@ogambiarradiyer507

3 жыл бұрын

Thanks for your feedback!

Wow, this worked! Thank you so much for the video!

@ogambiarradiyer507

4 жыл бұрын

Thanks for your feedback!

Thank you so much for your help. It's so easy with your video its like a miracle.

@ogambiarradiyer507

4 жыл бұрын

Thanks bro! This procedure has to be done periodically. It is fast and easy.

Thank you for this video. I'm now listening to this with the G933 power button fixed. Somehow while the area where the power button resides was cleaned up with it, the circuit board got a bit sticky on the other side after spraying with the contact spray. Hopefully it will not affect the board over time.

@ogambiarradiyer507

4 жыл бұрын

Thanks for the feedback!

Thank you so much, this worked for me!

@ogambiarradiyer507

4 жыл бұрын

Thanks for your feedback!

Thank you brother you just saved my money and time and i fixed my mouse with this spray too thank you again

@ogambiarradiyer507

3 жыл бұрын

Glad to hear it! Thanks for the feedback

This helped me too, thank you!

This works! Thank you! Perfekt! :) Saved me alot of money..

@ogambiarradiyer507

4 жыл бұрын

Thanks!

Thx brother, i will try this fix. Liked

O effort pra falar english foi very good. Parabéns for seu effort, porque english é a tal of commercial language.

@ogambiarradiyer507

4 жыл бұрын

Kkkkkk. Foi um effort sem precedentes! A timidez ajuda que é uma beleza também. Espero que tenha ajudado. A escolha do idioma foi pra ajudar a maior quantidade de pessoas. Valeu

Good video, well explained!

Thanks dude! Really helpful video

@ogambiarradiyer507

4 жыл бұрын

Thanks for you feedback! Glad to hear it!

Thanks a lot mate! You actually saved me!

@ogambiarradiyer507

4 жыл бұрын

Thanks dude! Anytime!

Thanks!! this fixed my power button!

thank you so much, it worked for me 2 times.

Thanks much! It fixed my problem also.

Awesome man! It worked really nice :)

Vlw cara, eu já tava ficando puto. Me salvou.

@ogambiarradiyer507

3 жыл бұрын

Qualquer coisa estamos aí! É de enlouquecer mesmo. Solução temporária. A definitiva sai em um vídeo em breve.

Worked for me! Thanks!

Thank you brother ! it helped me a lot :) don't have to change my G933. All new headsets for pc are crap from what i've seen ^^

@ogambiarradiyer507

4 жыл бұрын

Happy to hear your feedback! Thanks

@Roched0

4 жыл бұрын

@@ogambiarradiyer507 Happy that DIYers like you exist ! :)

TY mate, I just did it and it works at 100%, tyty

thanks very helpful. mine g633 have the same problem

It worked. Thanks!

It is surprisingly working 👍

You are the best man!!!

@ogambiarradiyer507

4 жыл бұрын

Thank you for your feedback!

Thanks! Worked for me!

hot glued my damn bored in there. lawl. works great! this would have been a lot easier though.

Got this recommendation after arriving to a similar video. This is TH EFIX, period. Worked on 2 units already.

It really works!! Thanks!