Hey! Did it work for you as well? Leave a comment telling me how was it! I'd be glad if you subscribe as well! Thanks Hey você! Esse video te ajudou a consertar teu fone? Deixe seu comentário contando como foi. Se inscreva no canal, Obrigado.

@GrifballNation

4 жыл бұрын

I ruined my Pin Header the Blue and White cord going from the mainboard to Volume Control :( now im trying to find a place to buy one, FFFUUU I knew I shouldnt have messed with it :(

@igor.lacerda

4 жыл бұрын

@@GrifballNation Sorry to hear that, cant you join them or resolder it?

@GrifballNation

4 жыл бұрын

@@igor.lacerda I ordered a replacement 24pin ribbon cable heres hoping that will fix them it arrives in a few days I will update, Fingers crossed.

@GrifballNation

4 жыл бұрын

in the meantime I managed to grab a Nari Essential for 80 from Marketplace so even if it doesnt work i got a great headset

@igor.lacerda

4 жыл бұрын

@@GrifballNation Great that you were able to find and order one, chris!

I have the 935 and after two years started getting the "one speaker on until you jiggle the power button" issue. Did a thorough clean following this video and the headset is like new. Thank you for this fix! For those wishing to do this on a pair of 935's, a few things: *The board with the power switch is difficult to take out and you will need to undo two additional screws inside which hold the translucent light cover. *I used alcohol on a lense cleaning cloth and utilized a mini flathead screw driver to ensure a thorough clean. *The metal springy pins on the actual power switch will pop out if you are not careful. Take caution if you attempt to clean them. *Take your time and be gentle with everything.

@MrIceTeaz

Жыл бұрын

Thanks :D

@UnhelpfulGiraffe

4 ай бұрын

Really appreciate this comment! Worked like a charm!

@HasanAhmed-ex6jv

3 ай бұрын

Is there anything additional to clean apart from the on/off switch assembly? the board comes off easily without removing any additional screws. The only difference is the ribbon attachment which is on the underside of the board.

@aker2KK

2 ай бұрын

thanks. I dont know how i have been bothered with this issue for thow years and finallt decided to fix it in 20 mins ir less.

@stefanpark1788

2 ай бұрын

​@@HasanAhmed-ex6jvhow did you remove the board without the other part? I can't seem to lift it out due to the volume control

Can't believe I need to do this on a headphone of this price range to make it works.. but i'll try it fore sure. Thx for the hint.

@mannnyald3310

2 жыл бұрын

Honestly foreal

@Prash1c

2 жыл бұрын

Its been engineered to fail so we buy new ones... imo. Logitech made other stellar products that don't fail at all and they never restocked or continued new versions (i.e., took em off the shelf). lol.

@fredericmelancon4472

2 жыл бұрын

Found the solution guys! Buy SteelSeries instead. Quality for the same price as my old junk of Logitech headset !

@Prash1c

2 жыл бұрын

@@fredericmelancon4472 Razer used to gold-plate there connectors, now, because of competition, they can't and also created similar planned obsolesces too. Steel Series was always solid when I was younger, but I have a feeling most gaming companies are switching away from quality.

Worked great! I do have a few tips for people going to attempt this: 1. Always disconnect the battery before opening up electronics 2. Be extremely careful and don't force anything 3. The metal contacts in the black plastic block can and will fall out. Make sure you have a (white) clean workspace so they're easy to spot. 4. Use contact cleaner if you have it

@igor.lacerda

3 жыл бұрын

Totally agree! 😄💪

@iMuz25

3 жыл бұрын

I have lost two of them. So childish of me but what am I supposed to do now ?

@fourarmz8397

2 жыл бұрын

I am having the same issue although I am not sure if I lost two or if there were only two when I got it

@d0c_dev

2 жыл бұрын

@@iMuz25 same, the answer tin foil takes a long time to get the size right but works

@gonzalosinche5523

2 жыл бұрын

It's still working since you did this?

I have the 935s, and figured they were defective with having to jiggle the power switch just right for the audio to work. Followed your directions, they work PERFECTLY now. THANK YOU!

I had the issue for so much time, i ended leaving the headset always on even when plugged for recharge... Today I took the time to find the solution and you totally nailed it. Thanks Igor

I figured I would try this fix. I have a G633 and a G635 headset, both with the same issues. On these headphones since they are wired, the switch isn't power, it's a switch between 3.5mm and USB. I replaced the G633 with the G635 after this issue became so bad that it wasn't worth dealing with but I never threw it away. I am happy to say this fixed BOTH of them completely. When I cleaned the contacts, nothing actually came off of them but they worked when I put them back together. I still waited a few days just in case there was still a bit of alcohol that didn't evaporate and that was the only reason it worked better but now 4 days later, I can even wiggle the switch around with no drop out of audio on either speaker. Thank you for the quick, informal and to the point video.

IT WORKED! You don't need to open the switch at 1:12! You can just spray with contact-cleaner/deoxidizer OR pour a few drops of 99.9% alcohol and then flip the switch up and down a bunch of times. (you can usually get 100ml of 99.9% isopropyl alcohol at the pharmacy for around 1dollar/euro). THANK YOU Igor for the tutorial and THANK YOU also for providing a good song to test the stereo-functionality!!! Very thoughtful of you :)

TLDR: This worked like a charm! I''ve had these headphones for such a long time. They have endured a lot, and I'm majorly impressed. But they slowly stared developing the usual symptoms for them. The power switch jiggle was becoming more and more annoying. I watched your other video where you simply lube it, and I found a comment saying you made one where you open and clean the switch instead. What a quick and easy repair. They are behaving the same now as they did when I got them. I also took the opportunity to lube the creaky joints, and clean out some broken rattly plastic bits that just sorta appeared... Thank you so much for the 2 quick guides. Saved me from a lot of annoyance (and spending money)! Word of caution. Be gentle and take care when rubbing the plastic part of the power switch (the part that moves). The little wires are not glued in, and I almost lost 2 of them.

Worked like a charm. With this fix and a replacement pair of earpads my headset is like new again after four years. ❤

This worked. I have had this headphones for maybe 3 years and they have never once worked properly. They are now the best-sounding headset I own. Thank you so much.

@igor.lacerda

3 жыл бұрын

Really glad it worked that well for you!

@toxik38680

2 жыл бұрын

it doesnt, its totaly random :/

For those who can't get their headset to power back on, it's most likely your blue flat cable. It has to "snap on" properly and clamp onto the blue flat cable securely. If you can tug on the cable gently and it comes out, then it's not secure. Ensure you line up the cable before closing the flap to lock it in.

I have a year-ish old G935, and its power switch has been skewing to only my left ear. I have to fiddle with it to get it to play equally on both sides, and even then it sometimes reverts to one or none. Found this video recommended on a forum, tried it out, and it worked like a charm! If I don't comment again, assume that the fix is still working. Thanks for the tutorial!

Just tried this on a g935. Took about 10 minutes, worked perfectly. Thanks man.

@igor.lacerda

2 жыл бұрын

Glad it helped, dude! 🤘⚡

@RMF76

2 жыл бұрын

@@igor.lacerda Hi Igor I have to say though that taking the power switch apart and firmly clicking everything back on place has obviously helped as well as the cleaning because theres no movement at all on the external switch anymore. Its like new. It doesn't wiggle.

@Andrew_Johnson_2973

2 жыл бұрын

I've got the same headset as you. I've started having this issue for a while now and now i can sort it out.

Thank you! Mine is good as new after following your tutorial; Finally no more bugs with the faulty power button! It's a shame that we have to fix such an expensive headset ourselves..

I had my pair since October of 2021 and I got THAT power issue since late 2022, I sat on this for a long time since I got new wired headphones but I FINALLY found this video and fixed it, thank you very much.

Thank you soo much! The left side would always be without power at the start and I had to jiggle the power button in order to get the headset to work. I took it apart and cleaned it as you did and it is working normal again! Small tip: The speaker itself is magnetic and will attract the small screws. So be mindful when you take it apart and set it back together!

This video saved my G935. You're a gentleman and a scholar.

OMG! Thank you!!! I've had to fiddle with the dang switch for so long I had given up on finding a fix. Was looking into the G935 and whether or not they fixed the power switch issue, and stumbled on this video. My headset works perfectly now and I can't get it to have issues even with trying to fiddle with the switch. It doesn't matter what I do with the switch, it's either on or off, no more static, uneven sound, or muffled sound! THANK YOU!!!

@CruzzieDoozie

2 жыл бұрын

Fyi G935 has the same issue. I've got the 933, and missus has the 935 and she has started experiencing the same issue

this just fixed the issue with my g935. The ribbon cable was a little different and I had to loosen a bolt to get the board away from the volume knob. This video helped me out a bunch and saved me some money. Thanks man. Really appreciate you sharing.

This did work. As a warning to anyone else trying this, the teeny-tiny wires in the switch piece you pop out are not very well attached, and trying to clean them with the alcohol pad may make them pop out and deform. There were some harrowing minutes trying to get them back in and lined up. I'd also suggest just leaving the damn things on once you've fixed them, instead of flipping the switch regularly and having to do this again in a few months...

@renemichelnunes

4 жыл бұрын

Very true, it happend on mine oops

@Ale-Nach

3 жыл бұрын

but if u let power on allways the baterry wasted all time or not?

@Rocksteady72a

3 жыл бұрын

@@Ale-Nach Not to mention that the sound balance becomes wonky when it wakes from power saving. If this headset had a pressable power button instead of the switch, it'd honestly be perfect. Having to say goodbye to my white one now because I'm DIY-illiterate 😭

@luizvictorsq

2 жыл бұрын

I didn’t noticed and screw mine

@ah9559

Жыл бұрын

In totally ruined those teeny-tiny wire... just cant get it right again. :(

im so happy this is common and someone made a fix, now i dont have to ship it for repairs and be without a headset for a couple of weeks just hoping i get it back fully functional. Igor, i salute you!

@Trap4Hunter

2 жыл бұрын

Update: finally had some spare time on my hands to try it out today and it worked like a charm! what an absolute legend you are

Just wanted to say that I stumbled across your vid and a few other references. I was able to dissemble after taking out the battery and sprayed in electronic contact cleaner (The quick dry no residue spray you can find at an auto store) , worked the switch and repeated a few times. Now my left speaker FINALLY WORKS! Thanks Dude!

Since the beginning I knew that will have an issue with this button. It stopped to work well after 6 months or so. Thanks to your video I could fix it

This worked like a charm, saved me from having to replace my G935!

Thanks mate! Fix is still valid to this day.

It works very well. I had the same problem fixing a joystick with drift. They have "the same" mecanism for x and y coordinates.

I'm using the wired one but had the same problem, follow your steps and everything work fine. Thanks for the nice video.

Thanks, followed the video and now my (not so old) G933 works again, sound in both ears!

Grande Igor, tudo beleza? Que ferramenta maravilhosa é o KZread! Vi que você mencionou o meu vídeo, muito grato por isso. Parabéns pois vc foi um passo além e desmontou o switch, o que acredito ser uma solução definitiva ou quem sabe prolongue o tempo entre as manutenções. Valeu meu brother!

@igor.lacerda

4 жыл бұрын

Fala camarada, de fato é sim! Convivi com esse problema há muito tempo e esbarrando com seu vídeo resolvi dar um jeito nisso, agora está como novo. E no meio disso tudo, resolvi começar o canal no KZread e não ser apenas expectador. Hahah abraço!

Great video! And I greatly appreciate that it's to the point instead of containing 15 minutes of rambling. The power button issue showed up within a year, and kept getting worse until my frustration level was high enough to bother to attempt to fix it. I didn't have an alcohol cloth so I just used a brush instead, which fixed it as well.

@igor.lacerda

3 жыл бұрын

Hey, thanks for the comment and glad it worked well for you too! hahah

@sarperaydog1055

2 жыл бұрын

Hello there, I just wanted to ask what was the issue to compare it to mine. I got muffled or no sound on my right side when the power button is in certain positions and I need to play with it to get that side to work. I just wonder if this will solve my problem.

@snieky

2 жыл бұрын

@@sarperaydog1055 This will solve your issue, at least for the next 3-9 months in my experience

@sarperaydog1055

2 жыл бұрын

@@snieky Thank you so much for answering and doing it this quick! I sense that you dumped yours and bought another headset that actually works? ^^ Jokes aside I've been using it for around 2.5 years and really like it, so I'll give it my best. Wish you a nice rest of the day, kudos!

@snieky

2 жыл бұрын

@@sarperaydog1055 Good luck! I'm still using the headset but definitely will not be buying logitech anymore. I've had too many products (keyboard, mouse, previous g930 headset) fail due to shitty design flaws or cheap component issues. Their only product i would buy again in a heartbeat is the G502 mouse.

Thank you for this video, worked perfectly and now the headset sounds like when it was new again!

@igor.lacerda

3 жыл бұрын

Glad it helped! Mine is still going as new as well for months now! hahah

Thank you, it worked! I went mad when i understood the issues was from hardware only 3 days after warranty end, as i was suspecting/investigating software/driver for months...

One of the small springs from the switch jumped out on mine. Guys be extra carefull with them! I spent 20min searching for them, they are thinner than a hair! got it back, all fixed now. Thanks mate!

Good as new! I opened mine up and was ready to trial and error myself. Then I figured there might be a tutorial on KZread. Better learn from the pros than fix it and mess up! Thanks!

@igor.lacerda

3 жыл бұрын

Hahah glad it helped! 🤟😄

Thank you a lot, I don't know why I didn't search a solution before !

@igor.lacerda

2 жыл бұрын

Glad I could help!⚡🤘

Hice lo que dice el video solo que lo limpie con alcohol isopropilico y quedo 10 puntos hace mas de 1 mes que hice el arreglo y anda perfecto sin interferencias ni nada, muchisimas gracias Igor.

Thanks for video, i at last fix this button on G935 too!

hey, it's works, i repared my G935 with the same problem!!! 04-17-22!! greetings from Chile!

thank you for this! it work beautifully. contacts had some rubbish on it and after clearing it, its working as brand new! thank you!

Worked like a charm, thank you!

I love you, this was the fix for my case

Thanks! Works great. Just be carefull when cleaning the contacts on the black switch, one golden filament came out, had to re assemble it. Luckily it did not go flying. Woks as new now.

Thank you for the video. I fixed my headset thanks to your video.

finally worked, thanks for the vid man! I also recommend this guys videos for this headset if you have the same problem guys!

@igor.lacerda

4 жыл бұрын

Thanks, glad it worked. I also was searching for a long time until I finally discovered how to do it.

Works great, thanks heaps for this vid! I have a G935 that suffered from the same problem. The flat cable was attached to the underside of the circuit board, so I couldn't remove it (not easily, at least), so I just let it sit and worked my way around it. Also, the battery appeared to be soldered tightly to the headset wires, so I wasn't able to remove it at all before I started working on the headset. Other than that, the steps are exactly the same, with the same result: a fine-working headset once more! (which should never have suffered from this issue in the first place, though, but that's on Logitech)

@vitaliy7536

Жыл бұрын

Hope it can help someone: on g935 there is a battery connector that can be easily detached but it is not connected to battery itself, it is on the wires right under the battery.

Fwiw. This worked for my G935 as well. Same kinda defect. The internal lay out is lil different but did deep clean, put it back together boom worked again. Much appreciated.

This worked for my g935 too, very similar disassembly

Thank you, I tried so many fixes but this one finally worked!! (at least for a week now)

@igor.lacerda

4 жыл бұрын

It's working for a few months here as well!

Great video, these instructions worked perfectly!

Normally I HATE when channels just put loud music on while presenting things. But this tune has a great beat and nice bass. Love the beat!

i dont know how to thank you ma man, i have been with this problem for 6 months and fainallyyyyyyyyyyyyy. thanks ma dude

@igor.lacerda

4 жыл бұрын

Hey Aseil, glad it worked! I've fighting this for over year, was so happy when i finally made it work. Consider subscribing, it would help me grow the channel. Thanks

por fin alguien lo explica perfecto!!! muchas gracias!!!

@igor.lacerda

4 жыл бұрын

Tambien me senti asi durante mucho tiempo, asi que decidi descubrir como solociobarlo. Gracias amigo.

Funcionó perfectamente!!! mil gracias!

This worked perfect for me, thanks for your help man!!! Funcionou perfeitamente pra mim, muito obrigado pela ajuda!!!

@igor.lacerda

4 жыл бұрын

Que ótimo, Diego! Se puder me ajudar também se inscrevendo no canal, ficaria agradecido!

Worked like a charm, thanks!

@igor.lacerda

3 жыл бұрын

Glad it helped!

Yes did work, I have the 2nd headset, I send the first one back after the problem come up and got a new one, now I had the same problem and solved it by cleaning the switch, good job!

It worked like a charm, you rock!!!

I can't thank you enough! It worked perfectly!! I was already thinking to change my headset but not anymore :D.

@igor.lacerda

4 жыл бұрын

Hey, Sergio! Glad it worked. I was feeling that way to, it was getting worst with time, i decided to face a fox before changing.

Thanks, works also fine for the G935!

@igor.lacerda

Жыл бұрын

Glad it helped🤘⚡

Thank you so much!!! This works like a champ!

Bro, thank you so much. It worked perfectly and it took me only 10 minutes to complete. They are as good as new. Cheers

Problem fixed! Thanks for the tutorial.

@igor.lacerda

Жыл бұрын

Glad it helped!

I had a very loud and annoying "white noise" like crackling from right speaker. And also had the "only full sound on second turn-on", almost no or mono/mixed sound on first turn-on issue. The turn-on issue solved by this, and i can say that crackling / white noise gone by 95%, so big thanks. It's a shame that they knew about the faulty switch, yet introduced also in the G935. We own two G935, one was faulty from the beginning, while the other one is fine. Maybe depends on manufacture date / bad batch of old switches.

Thanks a lot man! You saved my G933

Salvou o meu, tava ja irritado de ficar cutucando o switch pra fazer os 2 lados funcionarem. Obrigado.

@igor.lacerda

3 жыл бұрын

Fiquei meses assim tambem, camarada! Que ótimo que resolveu! 🤘⚡

Love you so much! I finally fixed it!! Thank you!!

Thank you! This worked great.

seems to be working for the mean time. I can jostle the power switch around and still notice a little sound distortion/cut out, but it is miles better than how it was. Thank you very much! Was *this* close to just throwing the headset out and buying something else, but this works much better!

@igor.lacerda

4 жыл бұрын

Glat it helped, I was feeling the same way. Out of warranty and out of patience.. hahah If you consider subscribing it would help me too, thanks!

@TheNazareth79

4 жыл бұрын

@@igor.lacerda subscribed!

@igor.lacerda

4 жыл бұрын

@@TheNazareth79 Cheers! 😁

muchas gracias, buscando el botón de repuesto estaba y me tope con tu video, de nuevo gracias!!!!

Muy bueno! Funciono a la perfección. En mi caso no desenchufe ningun cable, solo tire el limpia contacto y movi la perilla.

@igor.lacerda

4 жыл бұрын

Me alegro de que ayudó y fue aún más fácil. Si puedes suscribirte al canal, ayúdame también, gracias.

worked perfectly! x3 THANKS!

thank you for this explanation. i thought it had something to do with this switch, though i never thought a power switch would hamper the sound quality of a headset. i think logitech cut some corners on this rather expensive headset... But more importantly cleaning the contacts with citric acid and alcohol did the trick for me.

Thank you very much! It worked!

Didn’t fix mine completely unfortunately but it’s definitely better. Thanks for the video!

Hi, perfect. Works now fine again, THX.

Thank u dude, u r amazing. it worked.

Yup,this works great.Thanks

@igor.lacerda

4 жыл бұрын

Glad it helped! If you consider subscribing it would help me too, thanks!

Hi again, Igor! I just tried this and it definitely fixed it! The chip/ circuit board kept moving from the power button. I'd never thought of using WD-40 and alcohol wipes on it. At first I thought it'd be better to try to hold it down with something. Thanks again!! :D

@igor.lacerda

3 жыл бұрын

Hey Vanessa, i used it trying to adjust and holding for a long time , then it got worst and i was about to throw it to the wall, then i came up with the fix hahah

@tranvanessa03

3 жыл бұрын

@@igor.lacerda Ya, me too!! I was so upset with it I thought I'd snap the power button off lol. Thanks again for the fix!

Thank you very much! It worked great first time.

Awesome, this worked for me perfect

My G933 was annoying me, I spend like 5 minutes trying to get the power button to the correct place so both speakers work. I went to my dad's house earlier today, brought my headset and showed him this video. He watched your video and figured out what he had to do. Worked. Like a charm! Thanks man, really. Weird thing: My girlfriend has a G933 White, and it sounds like crap, (no bass, low volume) when compared to my G933. Even when plugging her headset on my PC so it will use my drivers and my presets, her G933 sounds like a cheap headset. The power button on her headset is just fine, MAYBE, just MAYBE doing this "might" help her, I will try later.

@Jart-ws7oo

Жыл бұрын

Funcionó?

@DLain

Жыл бұрын

@@Jart-ws7oo I fixed the button on my headset, yet I haven't opened my girlfriend's SHITTY sounding G933 yet.

Worked like a charm! My headset now works like never before! I prefer this method over the other ones where you spray a bunch of contact cleaner, cleaning like this is way more precise. Kind of stupid though that logitech makes products like these that go faulty after a year or 2 due to "dust buildup" it's like they want you to buy a new one every 2 years.

@Prash1c

2 жыл бұрын

Bingo! My hunch is that your hunch is correct, sadly.

Thanks for the video. I have the G935 and I'm assuming it's the same procedure. I will try and come back and tell of my success story. Thanks again.

@igor.lacerda

2 жыл бұрын

Take it easy, carefull with the wires behind the button, slowly and no force you should be fine 🤘⚡

it worked perfectly !! Thanks for the help !

@igor.lacerda

3 жыл бұрын

Glad it helped! 🤟

i know its been a while now, but i did this and it worked. i just wanted to say i also added dielectric grease in the switch to make this fix last longer. (permatex or trucklite)

THANKS DUDE!!!!!!!!! i was going to buy another one

THANKS!!! I could fix the issue that i had with the sound.

working perfectly thanks a lot !!

Thanks mane. Love you for this. As an additional tip you might wanna add some contact spray for better connection and to avoid having this issue ever again. Generally really disappointed with the build quality of this thing.

@igor.lacerda

3 жыл бұрын

Glad it helped! Sure thing man, just did with whatever i had at lockdown hahah

Thank you very much, it's working perfectly !

@igor.lacerda

4 жыл бұрын

Hey Dany, glad it work! 😀 Consider subscribing, it would help me too! Thanks

1:59 omg be VERY careful with this piece. Those are 4 tiny little wires that are loosely slotted in that black plastic piece. One of them fell out when I was wiping with an alcohol cloth and I almost lost it.

@kineticninja7989

3 жыл бұрын

same! me, my gf, and my mom went on a manhunt for that tiny little shit! luckily was able to find it and get my headset reassembled

@allerasouza

3 жыл бұрын

Same thing here, I almost lost it! lol

@emaPug

3 жыл бұрын

Thanks bruh! that really saved my headset

@iTFOS

3 жыл бұрын

U wont believe it... i lost 3 of them. I didnt know about that piece of shit. I found 1 in the ground, 1 in my bed and the last one... in a trash can. I took me about an hour to find them xD My headset works great now :D

Thank you so much! Its works

wow, so far this worked great, i used paper towels and spray isopropyl alcohol, and also a plastic pry tool thats used most on smart phones. thanks for this fix, was getting ready to buy another headset

@igor.lacerda

3 жыл бұрын

Yes, Ivar! Here its been working since.. haha

@spyofn6840

3 жыл бұрын

same

Thank you! it worked.

It works for G935!, thx bud!

@igor.lacerda

2 жыл бұрын

That's great, Alvaro! 🤘⚡

tremendo manito, hacia mucho me molestaba ese boton y no sabia como abrir los headset

@igor.lacerda

2 жыл бұрын

Gracias! FIco feliz que ajudou! 🤘⚡

worked 10/10 for my, Thanks man

@igor.lacerda

4 жыл бұрын

Thats great, Camillo! If you could please help me out subscribing to the channel, thank you!

Worked really well! Thanks dude.... The only thing I would mention is to be extra careful of the tiny little metal staple looking pieces in the switch housing (you can easily lose them and be screwed if you cant find them). Make sure to work in a clean surface area with some black construction paper underneath to be able to easily spot any lost/fallen pieces. Much love dude! Appreciate the help on that one.

@luizvictorsq

2 жыл бұрын

Just lost mine

@kineticninja7989

2 жыл бұрын

@@insurance95 time to bust out a flashlight and a magnet 👍 good luck

@kineticninja7989

2 жыл бұрын

@@insurance95 nice! You should post a link here just in case other people have this same problem

@igor.lacerda

2 жыл бұрын

Você pode arrumar alguns cabos de energia que usa em parede, abrindo eles você tem filamento de cobre. Dependendo da espessura interna do cabo, você terá filamentos mais grossos, você pode usar um desses pra fazer um substituto

@kineticninja7989

2 жыл бұрын

@@igor.lacerda ^ translation: You can fix some power cables that you use on the wall, opening them you have copper filament. Depending on the inner thickness of the cable you will have thicker filaments, you can use one of these to make a replacement

Gracias Igor, a mi amigo Jorge le sirvió 😀