LL4D Umarex Hdr50 - Tuning barrel install/test with bonus footage of valve, punch button, silencer.
Everything is here guys ⬇️ en.homedefence-24.com/
Жүктеу.....
Пікірлер: 40
@hamelnbeach7 ай бұрын
It's 12.5 Millimeter, not 4.5 mm. Thank you for your efford to teach us in a entertaining way😎
@lesslethalfordummies
7 ай бұрын
Who said 4.5mm because it wasn’t me? 😎
@hamelnbeach
7 ай бұрын
@@lesslethalfordummies Maybe I need to go to sleep, its night time in my county. I'm sorry. Tomorrow I will watch your Video again.
@lesslethalfordummies
7 ай бұрын
No problem. I do mumble sometimes 😂
@hamelnbeach
7 ай бұрын
@@lesslethalfordummies At first I thought you were confused with the metric and imperial systems. My bad.
@machien3217 ай бұрын
At last a good test with the tuning barrel without the extension! I have the compact myself and don't want the barrel extension because it wouldn't be eh... " compact" anymore...🤷🏻♂️... Because of your results I will now get one! Thanks👍🏻
@lesslethalfordummies
7 ай бұрын
The tuning barrel by itself even without the extension did better than i thought. I would totally test the Hdp50 compact tuning barrel for you, but i abused my compact with large steels balls until the detent was no more so it is isnt operational at this time. I would expect the results to be no different and would expect an improvement. Thanks for dropping a line.
@airgunsanonymouslesslethal19047 ай бұрын
Revolver looks good on you
@lesslethalfordummies
7 ай бұрын
Tell me more 😊
@RapidAssaultDefense7 ай бұрын
Nice like the tear down showing
@lesslethalfordummies
7 ай бұрын
👍🏼
@lesslethalfordummies
7 ай бұрын
🤜🏼🤛🏼
@yabadabadude51247 ай бұрын
Thanks for the review!
@lesslethalfordummies
7 ай бұрын
No problemo.
@HIPHOPMENTOR7 ай бұрын
they're threaded with a little green o ring on the latest Umarex Marker
@lesslethalfordummies
7 ай бұрын
I am not sold on the colour of the orings meaning anything. Orings can come in many different colours but can also be of the same composition. Colour doesn’t always mean it’s different.
@HIPHOPMENTOR6 ай бұрын
I think those gaps you have in the silencer with the foam... air catches perhaps
@lesslethalfordummies
6 ай бұрын
Real suppressors do cut velocity to some degree so i image the same principle applies here.
@trevligodmjuk27217 ай бұрын
Test with 12 and 16inch barrel..realy give power, with modified full kit. Only bad thing with this markers..12g get stuck in the handle bar.
@lesslethalfordummies
7 ай бұрын
Yes the 12g co2 wont last long. Eventually i will be testing more extensions when i decide on a build. Its going to be a doozy 😂
@runerebel84417 ай бұрын
Great test as always Sean. I was suprised the slilencer slowed down the velocity. Think your theory is right 🤔
@lesslethalfordummies
7 ай бұрын
I was on a full discovery mission today Rune 😆.
@RevoLution837 ай бұрын
Good video my friend
@lesslethalfordummies
7 ай бұрын
Merci. 👍🏼
@DennisPugliese2 ай бұрын
Is the running barrel steel or aluminum and is there a difference in either one
@lesslethalfordummies
2 ай бұрын
HD24 only sells the tuning barrel for 50cal in steel. The aluminum one you may have seen is a knock off from Riot Balls USA which i have never tested.
@jolynjacinto28907 ай бұрын
the other one is a bit fatter than the other one the neck before the restrictor
@lesslethalfordummies
7 ай бұрын
Maybe i will have to measure.
@trevligodmjuk27217 ай бұрын
Go Devastator 4.8 grams.
@lesslethalfordummies
7 ай бұрын
Most definitely will try some other slugs. 🐌
@trevligodmjuk2721
7 ай бұрын
@@lesslethalfordummies They give good joules and are fast, at the same time.
@THELESSLETHALSPOT
7 ай бұрын
Nice video great test with lots of interesting data.
@lesslethalfordummies
7 ай бұрын
@THELESSLETHALSPOT when the dust settled it was longer than expected. The velocity loss on the silencer still has me scratching my head.
@THELESSLETHALSPOT
7 ай бұрын
Cant beat Deez bullets!
@jolynjacinto28907 ай бұрын
😅🤣🤟
@sftatat6 ай бұрын
Could it be the foam inside is clipping the balls . Shame you didn't do test figures before modding the foam insert.
@lesslethalfordummies
6 ай бұрын
It is not possible for it to clip the foam as there is an internal perforated tube the ball travels through. I did do some brief testing prior to cutting the insert but didnt pay near enough attention to the data.
Пікірлер: 40
It's 12.5 Millimeter, not 4.5 mm. Thank you for your efford to teach us in a entertaining way😎
@lesslethalfordummies
7 ай бұрын
Who said 4.5mm because it wasn’t me? 😎
@hamelnbeach
7 ай бұрын
@@lesslethalfordummies Maybe I need to go to sleep, its night time in my county. I'm sorry. Tomorrow I will watch your Video again.
@lesslethalfordummies
7 ай бұрын
No problem. I do mumble sometimes 😂
@hamelnbeach
7 ай бұрын
@@lesslethalfordummies At first I thought you were confused with the metric and imperial systems. My bad.
At last a good test with the tuning barrel without the extension! I have the compact myself and don't want the barrel extension because it wouldn't be eh... " compact" anymore...🤷🏻♂️... Because of your results I will now get one! Thanks👍🏻
@lesslethalfordummies
7 ай бұрын
The tuning barrel by itself even without the extension did better than i thought. I would totally test the Hdp50 compact tuning barrel for you, but i abused my compact with large steels balls until the detent was no more so it is isnt operational at this time. I would expect the results to be no different and would expect an improvement. Thanks for dropping a line.
Revolver looks good on you
@lesslethalfordummies
7 ай бұрын
Tell me more 😊
Nice like the tear down showing
@lesslethalfordummies
7 ай бұрын
👍🏼
@lesslethalfordummies
7 ай бұрын
🤜🏼🤛🏼
Thanks for the review!
@lesslethalfordummies
7 ай бұрын
No problemo.
they're threaded with a little green o ring on the latest Umarex Marker
@lesslethalfordummies
7 ай бұрын
I am not sold on the colour of the orings meaning anything. Orings can come in many different colours but can also be of the same composition. Colour doesn’t always mean it’s different.
I think those gaps you have in the silencer with the foam... air catches perhaps
@lesslethalfordummies
6 ай бұрын
Real suppressors do cut velocity to some degree so i image the same principle applies here.
Test with 12 and 16inch barrel..realy give power, with modified full kit. Only bad thing with this markers..12g get stuck in the handle bar.
@lesslethalfordummies
7 ай бұрын
Yes the 12g co2 wont last long. Eventually i will be testing more extensions when i decide on a build. Its going to be a doozy 😂
Great test as always Sean. I was suprised the slilencer slowed down the velocity. Think your theory is right 🤔
@lesslethalfordummies
7 ай бұрын
I was on a full discovery mission today Rune 😆.
Good video my friend
@lesslethalfordummies
7 ай бұрын
Merci. 👍🏼
Is the running barrel steel or aluminum and is there a difference in either one
@lesslethalfordummies
2 ай бұрын
HD24 only sells the tuning barrel for 50cal in steel. The aluminum one you may have seen is a knock off from Riot Balls USA which i have never tested.
the other one is a bit fatter than the other one the neck before the restrictor
@lesslethalfordummies
7 ай бұрын
Maybe i will have to measure.
Go Devastator 4.8 grams.
@lesslethalfordummies
7 ай бұрын
Most definitely will try some other slugs. 🐌
@trevligodmjuk2721
7 ай бұрын
@@lesslethalfordummies They give good joules and are fast, at the same time.
@THELESSLETHALSPOT
7 ай бұрын
Nice video great test with lots of interesting data.
@lesslethalfordummies
7 ай бұрын
@THELESSLETHALSPOT when the dust settled it was longer than expected. The velocity loss on the silencer still has me scratching my head.
@THELESSLETHALSPOT
7 ай бұрын
Cant beat Deez bullets!
😅🤣🤟
Could it be the foam inside is clipping the balls . Shame you didn't do test figures before modding the foam insert.
@lesslethalfordummies
6 ай бұрын
It is not possible for it to clip the foam as there is an internal perforated tube the ball travels through. I did do some brief testing prior to cutting the insert but didnt pay near enough attention to the data.