What do you think about the TechT super bolt for the TMC?
@lesslethalfordummies3 сағат бұрын
I never tested the super bolt. The theory behind it is to be gentle on paint. Its action may be counter productive for less lethal unless you were to upgrade the spring.
@dale55603 сағат бұрын
I am thinking about giving it a try, I’ve looked everywhere for the Killhouse bolt and nobody has them.
@lesslethalfordummies3 сағат бұрын
@dale5560 looks like Ansgear has the delrin bolt listed as Warrior power tube and delrin bolt for Tippmann 98. This is the same as the Kill House but you just cant use the power tube portion.
@dale55603 сағат бұрын
@@lesslethalfordummies just ordered one, I can’t thank you enough for what you do for us guys.
@gerardomagallanes2789Күн бұрын
I had a question about the upgrade springs. Is the sear spring the same size as the bolt locking spring? And if so can you use the sear spring for bolt locking spring
@lesslethalfordummies21 сағат бұрын
The sear spring is actually what HD24 labels as the “bolt locking spring”. It is sold as one in the package. What HD24 calls the sear springs and sells as a pair is the return spring and trigger spring. Those two are the same.
@gerardomagallanes278921 сағат бұрын
@@lesslethalfordummies awesome thank you for your help I appreciate all the information you put out on your videos, there awesome
@lesslethalfordummies20 сағат бұрын
@@gerardomagallanes2789just in case i confused you more….the bolt locking spring is the must have if you increase bottle pressure. The other two springs increase trigger return feel and slow full auto down when running the wide open HD24 heatcore. Personal preference in my opinion.
@zenriderzsouthflorida9904Күн бұрын
Just got my hd24 kit from MCS only I did not get the barrel and trigger sear springs. Will my upgrade still function properly? 😊
@lesslethalfordummiesКүн бұрын
The sear spring (bolt locking spring) is a must if running more than standard 800psi pressure. Mine ran fine on standard bottle pressure and only auto fired when i went above.
@zenriderzsouthflorida9904Күн бұрын
I have the bolt spring but didn’t want to fidget with the trigger group springs and I’m only running 800
@zenriderzsouthflorida9904Күн бұрын
Stock barrel n no trigger group springs. I have everything else.
@zenriderzsouthflorida9904Күн бұрын
@@lesslethalfordummiesthanks for all your help professor less lethal. Much appreciated
@lesslethalfordummiesКүн бұрын
Bolt spring and 800psi you should be fine. I say should only because mine functioned fine setup like this originally. I would consider the sear spring in the very near future or if it becomes apparent you need it. Shimming the sear spring is also a temporary option.
@MrJr298Күн бұрын
One very awesome technical of a air gun mini machine.Looks like the designer had to really but their minds into it to get this little machine into the market.Only if they were able to make it really compact with the same first shot power; will make it more awesome.
@lesslethalfordummiesКүн бұрын
💯 agree. Although more compact is difficult being a 68cal launcher, it could definitely use more consistent power.
@jrstoltzfus958Күн бұрын
I can't believe I have as many power upgrades for both my markers and still don't understand what I'm not comprehending about barrels, I bought a rifled hammerhead one shot for my m17 and found that there was too much lip between the marker and the threading but it just barely seals and locks into my tipx, I'm really boutta buy that $100 fluted and rifled m17 barrel that's like 15in
@lesslethalfordummiesКүн бұрын
I stick to smoothbore barrels and haven’t had any issues so long as the barrel was A5 threaded and has a 7/8” OD.
@RapidAssaultDefense2 күн бұрын
Now that’s badass ! Hopefully this comment is t taking down by YT
@lesslethalfordummies2 күн бұрын
I can see it! KZread has been bad lately. I have also lost many comments myself.
@Paulo-ne3sy3 күн бұрын
HD24 !! Everything is going down the river, here in German. But ey, we have HD24, nothing else matters❤❤
@Paulo-ne3sy3 күн бұрын
It is by far the best on off I ever had!
@lesslethalfordummies3 күн бұрын
Only one i had that actually degasses reliably everytime.
@Hebesgugl4 күн бұрын
That will stop anyone.
@josephpark76504 күн бұрын
Ur still the less lethal man. Thats beautiful. Ordered a tank like that on alie express last summer and it never arrived. I figured customs had seized it.
@lesslethalfordummies3 күн бұрын
Thats too bad. I have had pretty good luck with Ali stuff actually showing up.
@Kliman74 күн бұрын
Thank you
@zenriderzsouthflorida99044 күн бұрын
Masterpiece maker 😊
@PHLessLethal4 күн бұрын
You only need 1 shot 😂
@pinoylesslethal5 күн бұрын
is that ZRam ZExtension give more velocity how much more fps additional from the original stock fps and where did you get it
@lesslethalfordummies3 күн бұрын
A factory double deleted gets about 18j of energy.
@DingleBerryschnapps5 күн бұрын
Would you say this is on par with the m17 now? Edit: Never mind. I keep forgetting where the air tank attaches. I don't like it.
@lesslethalfordummies3 күн бұрын
No the Tmc will never be as powerful as the M17 can be.
@FLAlesslethal5 күн бұрын
So what mods have you done- just take out the valve block, brass doodah or?
@lesslethalfordummies5 күн бұрын
Valve block is all i removed at this point and a backwards restrictor top hat. 🙃
@TonyMontana-gh4sb5 күн бұрын
That looks sick 🔥
@jerryhoneycutt7456 күн бұрын
Sean need pick your brain. I rebuilding my Milsig magazines. Drilled shells and use binding screws to keep shells together. Got Helix springs and T15v2 followers. So the spring doesn't push up in follower like yours. So John Wixon winder delete kits. I worked follower bushing up into spring and super glue bushing to follower. Does it matter which end of spring to use. No smaller ends just one end has few more curls at end of spring terminating spring g ends. So I can fit follower bushing st either end. Ok story done😂
@lesslethalfordummies6 күн бұрын
The smaller end should fit the follower but irrelevant. Does the follower stop short of the top of the square head?
@jerryhoneycutt7456 күн бұрын
Yes stops before top of feed head@@lesslethalfordummies
@lesslethalfordummies5 күн бұрын
Probably need to sand the T15 follower a bit. They can be a little on the tight side or put a few balls in and use a rod to push them down and let them pop right up to break in the follower.
@vikkleo6 күн бұрын
Great video thanks
@sj4601626 күн бұрын
Im torn between this and the m4 177 airgun from Crossman.
@lesslethalfordummies6 күн бұрын
The only thing i can say is if anything happens to the Crossman, parts may not be available.
@emmanualmceachern99336 күн бұрын
Nice bro 👀😳🔥
@sammythebull22407 күн бұрын
I have a Byrna LE, considering a S2, but I realized I'll have to find another video to watch bc you used some slang regarding the name of the second projectiles you received and I have no idea what they are or what you called them (inerrts, inners?) I can't just guess at what you're saying for 15 minutes. Maybe as you discuss a particular item- say what their real name is and what they are. Deuces.
@lesslethalfordummies7 күн бұрын
Try google inert projectile.
@steveneill32787 күн бұрын
I really like the weapon system and less than stuff as its fun to shoot in your backyard... where do I shop for that shotgun? thanks from a new subscriber.
@lesslethalfordummies7 күн бұрын
Any Umarex dealer (paintball shop) would have the HDX shotgun. Less Lethal Defence HomeWreker sells it with upgrades installed already.
@Rooseveltdunn7 күн бұрын
Is the sicariis customized or does it average over 20 joules out of the box?
@lesslethalfordummies7 күн бұрын
Mine did not reach anywhere close to 20j straight out of the box.
@edmaslana41847 күн бұрын
Think I'm going to stay with First strike, spent a lot of money on umarex,mercury, bryna.
@lesslethalfordummies7 күн бұрын
If you are happy there is no reason to change it up.
@edmaslana41847 күн бұрын
👍
@edmaslana41847 күн бұрын
Not owning one or researching one are there mods available I really like my fsc's over all my other markers
@lesslethalfordummies7 күн бұрын
As of now there are no commercially available mods. I have had some success bumping this up to almost 30j but am still working through some issues.
@edmaslana41847 күн бұрын
Whats your opinion of this marker 😮
@lesslethalfordummies7 күн бұрын
More powerful and consistent than a Byrna SD and LE in some cases.
@frgtdrepsn29047 күн бұрын
Back to the drawing board. I know u can get this to get that magical 37 J+ again. Keep at it 🫡
@lesslethalfordummies7 күн бұрын
Indeedy do. Things will be here shortly.
@PFunk6098 күн бұрын
I just got a TMC and a TMC Elite. Are there ppl/places that can mod them for us?
@lesslethalfordummies7 күн бұрын
I don’t know anyone doing TMCs. They are very easy to work on yourself with a few basic tools. I did included links in this videos description to the springs need to bring the power up on a mostly factory marker.
@PFunk6097 күн бұрын
Usually im afraid to open these up, but eehhh f it, theyre pretty budget, and i got 2 lol. Maybe ill try one myself. Ty sir 👍
@lesslethalfordummies7 күн бұрын
@@PFunk609well if you get stuck send me an email. 😁
@PFunk6096 күн бұрын
U da man for that! We'll see how it goes.
@PFunk6096 күн бұрын
@lesslethalfordummies next question is why 2 different springs? i only saw u swap 1. did i miss it in another video?
@Aj-om4dt9 күн бұрын
I love ALL your videos dude. Always keep pumping them out. I got a M17 Grimburg barrel & jul’s Full bypass 1100psi reg 49-50J & im working on a FCS pistol with VKS internals using 16-20g co2 using Jul’s also 👍
@lesslethalfordummies9 күн бұрын
Thanks. Sounds like you got a plan already.
@AndrewJenks9999 күн бұрын
good stuff here 👍.
@lesslethalfordummies9 күн бұрын
Thanks.
@-SLEAZY-9 күн бұрын
Damn what attachment to make the stock fold? Now I got hella time off work I might start mossing my cqmf stock is 30 joules right? Prv delete is probably 60 joules.. add another 10 inch barrel possibly 80 90 joules however I'd like a short smg build. I wonder if that 9ci tube can fit in my stock like my buffer tube asa. That's be perfect. Hmm... I mean it should in theory. Then that's around 100j easily just prv. And a long barrel. Hmm 70j should still knock someone off their ass my gavle I love but wish I could mod it however not no mods for it rn. Gonna be fun working on my cqmf Yee!! Every asa attachment machine pistol asa adapter and another smaller one and I got all the 1/8 npt and 3 sized coil ropes whatever for asa rope lol damn I got so many ideas I just need to buy that 9 ci tank and Jonathan Scott's cqmf mag well that can use a Tippmann mag or zeta mag then I got a good ass smg build. Any recommendations.
@lesslethalfordummies9 күн бұрын
The rear picatinny adapter and stock is from MCS. It allows the attachment of 1913 buttstocks….some of which fold. Sounds you got lots of great ideas just need to put in the work.🙂
@sj4601629 күн бұрын
Is this a paintball gun
@lesslethalfordummies9 күн бұрын
That is correct sir.
@nicholaspagliaro711210 күн бұрын
What's the thing on the other side?
@lesslethalfordummies10 күн бұрын
That is the air supply via a Condor PCP air cylinder.
@nicholaspagliaro71129 күн бұрын
@@lesslethalfordummies what for a gas mask?
@nicholaspagliaro71129 күн бұрын
@@lesslethalfordummies or is the gun airsoft?
@nicholaspagliaro71129 күн бұрын
@@lesslethalfordummies nvm yeah it's airsoft.. that's why I didn't get it 😆 I was like woah never seen that before.. thought it was a custom blowtorch or big ass flashlight
@Sola_Scriptura_1.61810 күн бұрын
Another great video!
@lesslethalfordummies10 күн бұрын
Thanks. Oldie but a goodie. Bypassing is a good way to actually determine if your regulator spring is weakened.
@Sola_Scriptura_1.61810 күн бұрын
Oldie for some, but not for others 😀 As the community grows, it would be good to redo some of these videos touching on the good, the bad, and the ugly of some of these mods.
@lesslethalfordummies10 күн бұрын
@Sola_Scriptura_1.618 very true. Got so many videos stuff gets buried easily.
@alex135t10 күн бұрын
without the stock it would look like hl2 smg
@louvertureandco10 күн бұрын
🔥🔥🔥 Is there a list of instructions and a parts list located somewhere?? Help!!! 😂🤣 I'll pay for info if need be champ!!
@lesslethalfordummies10 күн бұрын
Not yet. I am ironing out details so it is as streamlined as possible. I will included links where i can Aliexpress, Amazon, MCS have all played a part. No payments necessary.
Пікірлер
What do you think about the TechT super bolt for the TMC?
I never tested the super bolt. The theory behind it is to be gentle on paint. Its action may be counter productive for less lethal unless you were to upgrade the spring.
I am thinking about giving it a try, I’ve looked everywhere for the Killhouse bolt and nobody has them.
@dale5560 looks like Ansgear has the delrin bolt listed as Warrior power tube and delrin bolt for Tippmann 98. This is the same as the Kill House but you just cant use the power tube portion.
@@lesslethalfordummies just ordered one, I can’t thank you enough for what you do for us guys.
I had a question about the upgrade springs. Is the sear spring the same size as the bolt locking spring? And if so can you use the sear spring for bolt locking spring
The sear spring is actually what HD24 labels as the “bolt locking spring”. It is sold as one in the package. What HD24 calls the sear springs and sells as a pair is the return spring and trigger spring. Those two are the same.
@@lesslethalfordummies awesome thank you for your help I appreciate all the information you put out on your videos, there awesome
@@gerardomagallanes2789just in case i confused you more….the bolt locking spring is the must have if you increase bottle pressure. The other two springs increase trigger return feel and slow full auto down when running the wide open HD24 heatcore. Personal preference in my opinion.
Just got my hd24 kit from MCS only I did not get the barrel and trigger sear springs. Will my upgrade still function properly? 😊
The sear spring (bolt locking spring) is a must if running more than standard 800psi pressure. Mine ran fine on standard bottle pressure and only auto fired when i went above.
I have the bolt spring but didn’t want to fidget with the trigger group springs and I’m only running 800
Stock barrel n no trigger group springs. I have everything else.
@@lesslethalfordummiesthanks for all your help professor less lethal. Much appreciated
Bolt spring and 800psi you should be fine. I say should only because mine functioned fine setup like this originally. I would consider the sear spring in the very near future or if it becomes apparent you need it. Shimming the sear spring is also a temporary option.
One very awesome technical of a air gun mini machine.Looks like the designer had to really but their minds into it to get this little machine into the market.Only if they were able to make it really compact with the same first shot power; will make it more awesome.
💯 agree. Although more compact is difficult being a 68cal launcher, it could definitely use more consistent power.
I can't believe I have as many power upgrades for both my markers and still don't understand what I'm not comprehending about barrels, I bought a rifled hammerhead one shot for my m17 and found that there was too much lip between the marker and the threading but it just barely seals and locks into my tipx, I'm really boutta buy that $100 fluted and rifled m17 barrel that's like 15in
I stick to smoothbore barrels and haven’t had any issues so long as the barrel was A5 threaded and has a 7/8” OD.
Now that’s badass ! Hopefully this comment is t taking down by YT
I can see it! KZread has been bad lately. I have also lost many comments myself.
HD24 !! Everything is going down the river, here in German. But ey, we have HD24, nothing else matters❤❤
It is by far the best on off I ever had!
Only one i had that actually degasses reliably everytime.
That will stop anyone.
Ur still the less lethal man. Thats beautiful. Ordered a tank like that on alie express last summer and it never arrived. I figured customs had seized it.
Thats too bad. I have had pretty good luck with Ali stuff actually showing up.
Thank you
Masterpiece maker 😊
You only need 1 shot 😂
is that ZRam ZExtension give more velocity how much more fps additional from the original stock fps and where did you get it
A factory double deleted gets about 18j of energy.
Would you say this is on par with the m17 now? Edit: Never mind. I keep forgetting where the air tank attaches. I don't like it.
No the Tmc will never be as powerful as the M17 can be.
So what mods have you done- just take out the valve block, brass doodah or?
Valve block is all i removed at this point and a backwards restrictor top hat. 🙃
That looks sick 🔥
Sean need pick your brain. I rebuilding my Milsig magazines. Drilled shells and use binding screws to keep shells together. Got Helix springs and T15v2 followers. So the spring doesn't push up in follower like yours. So John Wixon winder delete kits. I worked follower bushing up into spring and super glue bushing to follower. Does it matter which end of spring to use. No smaller ends just one end has few more curls at end of spring terminating spring g ends. So I can fit follower bushing st either end. Ok story done😂
The smaller end should fit the follower but irrelevant. Does the follower stop short of the top of the square head?
Yes stops before top of feed head@@lesslethalfordummies
Probably need to sand the T15 follower a bit. They can be a little on the tight side or put a few balls in and use a rod to push them down and let them pop right up to break in the follower.
Great video thanks
Im torn between this and the m4 177 airgun from Crossman.
The only thing i can say is if anything happens to the Crossman, parts may not be available.
Nice bro 👀😳🔥
I have a Byrna LE, considering a S2, but I realized I'll have to find another video to watch bc you used some slang regarding the name of the second projectiles you received and I have no idea what they are or what you called them (inerrts, inners?) I can't just guess at what you're saying for 15 minutes. Maybe as you discuss a particular item- say what their real name is and what they are. Deuces.
Try google inert projectile.
I really like the weapon system and less than stuff as its fun to shoot in your backyard... where do I shop for that shotgun? thanks from a new subscriber.
Any Umarex dealer (paintball shop) would have the HDX shotgun. Less Lethal Defence HomeWreker sells it with upgrades installed already.
Is the sicariis customized or does it average over 20 joules out of the box?
Mine did not reach anywhere close to 20j straight out of the box.
Think I'm going to stay with First strike, spent a lot of money on umarex,mercury, bryna.
If you are happy there is no reason to change it up.
👍
Not owning one or researching one are there mods available I really like my fsc's over all my other markers
As of now there are no commercially available mods. I have had some success bumping this up to almost 30j but am still working through some issues.
Whats your opinion of this marker 😮
More powerful and consistent than a Byrna SD and LE in some cases.
Back to the drawing board. I know u can get this to get that magical 37 J+ again. Keep at it 🫡
Indeedy do. Things will be here shortly.
I just got a TMC and a TMC Elite. Are there ppl/places that can mod them for us?
I don’t know anyone doing TMCs. They are very easy to work on yourself with a few basic tools. I did included links in this videos description to the springs need to bring the power up on a mostly factory marker.
Usually im afraid to open these up, but eehhh f it, theyre pretty budget, and i got 2 lol. Maybe ill try one myself. Ty sir 👍
@@PFunk609well if you get stuck send me an email. 😁
U da man for that! We'll see how it goes.
@lesslethalfordummies next question is why 2 different springs? i only saw u swap 1. did i miss it in another video?
I love ALL your videos dude. Always keep pumping them out. I got a M17 Grimburg barrel & jul’s Full bypass 1100psi reg 49-50J & im working on a FCS pistol with VKS internals using 16-20g co2 using Jul’s also 👍
Thanks. Sounds like you got a plan already.
good stuff here 👍.
Thanks.
Damn what attachment to make the stock fold? Now I got hella time off work I might start mossing my cqmf stock is 30 joules right? Prv delete is probably 60 joules.. add another 10 inch barrel possibly 80 90 joules however I'd like a short smg build. I wonder if that 9ci tube can fit in my stock like my buffer tube asa. That's be perfect. Hmm... I mean it should in theory. Then that's around 100j easily just prv. And a long barrel. Hmm 70j should still knock someone off their ass my gavle I love but wish I could mod it however not no mods for it rn. Gonna be fun working on my cqmf Yee!! Every asa attachment machine pistol asa adapter and another smaller one and I got all the 1/8 npt and 3 sized coil ropes whatever for asa rope lol damn I got so many ideas I just need to buy that 9 ci tank and Jonathan Scott's cqmf mag well that can use a Tippmann mag or zeta mag then I got a good ass smg build. Any recommendations.
The rear picatinny adapter and stock is from MCS. It allows the attachment of 1913 buttstocks….some of which fold. Sounds you got lots of great ideas just need to put in the work.🙂
Is this a paintball gun
That is correct sir.
What's the thing on the other side?
That is the air supply via a Condor PCP air cylinder.
@@lesslethalfordummies what for a gas mask?
@@lesslethalfordummies or is the gun airsoft?
@@lesslethalfordummies nvm yeah it's airsoft.. that's why I didn't get it 😆 I was like woah never seen that before.. thought it was a custom blowtorch or big ass flashlight
Another great video!
Thanks. Oldie but a goodie. Bypassing is a good way to actually determine if your regulator spring is weakened.
Oldie for some, but not for others 😀 As the community grows, it would be good to redo some of these videos touching on the good, the bad, and the ugly of some of these mods.
@Sola_Scriptura_1.618 very true. Got so many videos stuff gets buried easily.
without the stock it would look like hl2 smg
🔥🔥🔥 Is there a list of instructions and a parts list located somewhere?? Help!!! 😂🤣 I'll pay for info if need be champ!!
Not yet. I am ironing out details so it is as streamlined as possible. I will included links where i can Aliexpress, Amazon, MCS have all played a part. No payments necessary.