For more information on liqui moly check out the link below amzn.to/2vZFV3e

@brentthedetailman2228

5 жыл бұрын

You should use a little bit of bio desiel. I worked at a plant that made bio disiel and let me tell you it is the best cleaning agent I ever came across

@NATESINTERACTIVEAUTO

5 жыл бұрын

Thanks

@SuperTurboAE111

5 жыл бұрын

@@brentthedetailman2228 You mean use Bio-diesel to spray into it directly? Or mix 2-3oz into that can of liqui moly?

@brentthedetailman2228

5 жыл бұрын

Idk that part still needs to be figured out lol

@brentthedetailman2228

5 жыл бұрын

I do know that bio diesel is so strong it would eat the rubber from my boots and when put into a diesel tank with 100% bio diesel it will clog the filter at least twice because it cleans everything. I've put a Mason jar into my gas tank before with no problems but never tested it to see if it cleaned anything.

Great to know you listen to all the suggestions you get, great job modifying the accent, keep improving. Thank you for taking my advice about the catchphrase. Still waiting for the next round in the oil tournament.

@NATESINTERACTIVEAUTO

5 жыл бұрын

Im hoping that will be finished today

Liqui Moly makes great products. I have used the engine flush in 2 of my Subaru's (one has 115,000 the other 195,000). What a difference! Idle quality very much improved, engines much , much smoother and noticable reduction in engine noise. Their injection cleaner works well too.

@thulanicele7843

11 ай бұрын

Thanks I was concerned cause most people say those products are damaging cars by causing blockages in channels where fluids move Scotty said so

Just got done with mine. Ran 1 bottle through the TB like you did and 1 bottle through the vacuum line of the break booster. 90 min heatsoak and 30 min highway speed and repeated the same procedure one more time. I know a little of an overkill, but noticable difference in how smooth the power comes on. LM is cheap compared to CRC. Also replaced 500ml of the motor oil with seafoam before the start.

LiquiMoly fuel system cleaner saved me about $2600 on a Lexus gs300 in which the idle control valve was glogged and stocking. In the end I went overboard and bought six cans over two months. Yep, $180 and the car has never run with more power. Absolutely a fan.

@Techie1224

2 жыл бұрын

you can unbolt IAC valve and clean it for 1$ lol

@hcr32slider

Жыл бұрын

@@Techie1224 and if you want to be fancy, you can buy a can of carby cleaner for $5. Taking it off and cleaning is a 2 minute job and you're guaranteed its clean.

@luisponce1472

Жыл бұрын

​@@Techie1224what is IAC valve?

@Techie1224

Жыл бұрын

@@luisponce1472 google it

@Jahalang82

Жыл бұрын

​@@luisponce1472 idle air control valve

I used this in my 85 honda that was barely failing smog and it brought it up 20 points!! Use it periodically in all of my old cars

Thanks for all your work on this.

@NATESINTERACTIVEAUTO

5 жыл бұрын

Thank you for watching its time we finally found a cleaner that works

I always do these cleanings with load in the engine. Like cruising in a Road. I use the windshield washer plumbing to do it. With heat and pressure and rpms the temperature goes up and the dispersants get way more efficient. I use ethanol mixed with water and go ridding hard and injecting it to the best distribution intake manifold ports. It doesn't hurt any sensors or Catalist, just clean them real good.

@mancavemotorsports

3 жыл бұрын

Damn man thats genius

@pagepro211

2 жыл бұрын

It took me awhile to understand what you mean but now I get it and your comment should be a highlighted.

@tomasnokechtesledger1786

2 жыл бұрын

@Hagbard Celine Yeah, thanks brothers! I Appreaciated those.

@josecarlossanchez4005

Жыл бұрын

Make a video of how to do it.

@Alvon_PR

Жыл бұрын

How much mixture of water and ethanol? 50:50?

3:26 - "Don't reach your hands in 'round these belts, like this...AAAAHHHH SHIT, MAH HAND!!!!!"

Worked pretty good. Keep up the tests! Thanks.

@NATESINTERACTIVEAUTO

5 жыл бұрын

Thanks im excited after that one finally

@volodymyrzakolodyazhny7740

3 жыл бұрын

I'm not sure.

Can you do it multiple time back to back consider the time and driving requirements? Ty

I love liqui moly products. One piece of advice for next time and others out there going to do this. make sure you spray any liquids after the MAF sensor. I'm an ex mechanic and have seen the affects of when the liquids damage the sensor. Using proper MAF sensor cleaner is advised.

Also, the problem is what that carbon can do to your piston rings as that cleaner dissolves and chunks of that carbon drops into the combustion chamber. It can rip your piston rings and cause engine failure folks. I'm a 27 year mechanic.

Wow. Impressive. I didn't think you could clean out the valves with a cleaner like that, especially on a gdi motor. I have an 06 vw passat, 2.0t with a 140000 mi on it. Might be worth to try it out. Thanks.

@nenadmomcilovic9133

2 жыл бұрын

if youre in the states, check out STP pro-series intake valve cleaner.

thanks bro.....much appreciate your efforts my R56 turbo mini had the entire top end redone abt 15,0000km ago....they drink oil....'m doin this every month now on..

Liquimoly works great, put some additive in my fuel for a diesel engine and now it just feels and sounds so much better. No more knocking!

To clean the intakes search for a specialized (!) blast cleaning service who uses walnut grit. This is about 300€, but the intakes would look like new. Can rise 20-30 PS. Install a oil catch can (OCC) after that to prevent condensing oil damps on the cooler intake valves.

For sure this is one that work and its clearly visible. Most do not. Thanks.

@ooooopsszzz

3 жыл бұрын

Another vw scandal lmao 😂

What did you mix the product with? Liqui Moly + what else to make the spray liquid?

Just used this on my 2013 Elantra limited. We will see how it works. Only has 60k on it but the valve train is noisy sometimes even when up to operating temperature. The used car dealer I bought it from said they have some noise when cold so fingers crossed I have similar results although I don’t have a borescope to check I’ll see if I notice any driving improvements. Thanks for the great video ! Now to let this thing heat soak ! 👍

@aircommandslipperz

2 жыл бұрын

any updates??

Great video; great idea with the spray bottle; im in for this product !!

Thanks Nate the Great. I’ll try that this coming weekend

Running the engine without the mass air flow connected? No check light?

Nate, would this hurt spraying in the throttle body of a 99 Firebird, 3.8, after removing throttle body sensor?????

It says on the can to add it into fuel tank. Would it have thae same results by following the can instructions?

Got question do you spray it to egr valve? And then it goes through valves?

how did you get that borescope view?

Wsa there much smoke coming out the exhaust from the carbon?

Ive a briggs snd stratton 27hp v twin engine appears ive a sticky valve on one cylinder can i try this and whats the best method. Im not mechanical so help is really needed. Thanks in advance for any advice.

can you please test mopar combustion chamber cleaner?

Hi Nate, would you recommend the Liqui Moly over the CRC intake valve cleaner? Or would you recommend CRC

Will it damage the mas air flow sensor?

Thanks man! Folks swear by their oil. I've used some of their other cleaning products. I"ll try this one next.

could you explain me WHy you don't use The normal method putting the liquimoly into the Fuel ? or is this method more direct in order to clean the valves ?

I'm just wondering what if a small chunk of the hard carbon get into the engine???? Is that possible?

Seriously thinking about installing a throttle body spacer with a feeding port. Somehow installing a pressurized cylinder that can be activated by the driver similar to the meth kits. Constantly being able to feed a bottle through before turning off the car.

I'm impressed. I'm going to try this on my 06' Lexus 430.

It also works with going a long distance with a high rpm - min one hour at 4-5k rpm on diesel - 6-8k rpm on esence. the enduring high temperature at the exhaustsystem will burn most oilcoal on valves, collector, and exhaustepipes... sometimes it causes black dust out of the pipes - that's when it works...

How's Liqui moly Diesel purge ? Is it safe to use in 1.9tdi diesel 2007 clocked 1 lac kms on odo. Dose it make engine smooth and clean? Will it casuse damage to tge seasls and other componants? Please share your experiance friends.

Won't this procedure damage the Mass Airflow Sensor?

liquimoly valve clean comes in a much smaller can, but is also much cheaper here in Europe. Makes you wonder whether using a full can of CRC is necessary per treatment. I will do regular treatment using 1-2 cans of liquimoly. A smaller dose, means less liquid in the engine at any given time. I found using CRC some of it got stuck in the intake mainfold or pieces (*of carbon deposits) came off, because my engine misfired (I accelerated to suddenly) don't do that. Maybe should let it soak a bit longer when using more or drive more carefully.

I know it's not recommended to put in your transmission if it's automatic but can you still add it to your motor oil if it's an automatic?

Is GDI. Engine good or not? Because many car with GDI get this same problem

Thanks for promoting the product

@NATESINTERACTIVEAUTO

4 жыл бұрын

? If so i would be liable to say otherwise a company wouldn't support you. Maybe a no name small company

Hi,what about the catalizer convertor when you clean the carbon from the head cylinder valves ,may be the catalizer closed????????,thanks for your video

If it is Carburator or MONOinjection?

Can i use this method on my 1972 diesel tractor ?

I have a 2005 Audi A4 3.0 V6. Is it a GDI engine and will liquid Molly work good for it? Trying to ask & find out. Thanks

Will this damage any intake sensors?

I have been doing this to fleet vehicles for a while Just use water poke 2 small holes in a water bottle cap I use 2 bottles and with a hot engine rev the engine to different rpm no steady rpm and spray water in the carb or throttlebody I have done multiple treatments over the years and even pulled the engines out after and they have come out cleaner that that

Is that safe to do with the mass air flow in line?

nice clip and good to know it's working. One question. What was the mileage when this was performed? and had you done before? thanks in advance.

have you try the CRC valve cleaner?

You should do it again after a few days and see if there is another improvement!!

guys, is it normal kinda white smoke escapes while applying?

grazie tante per il video, lo ho applicato e ha ripristinato le valvole chiuse, molto bene questo prodotto, lo raccomando

do you only use 1 150ml bottle? sry for bad english i speak germany

So you still get all of that carbon build up even with a catch can installed?

Is this better than stp fuel system cleaner?

Wouldn't a spary bottle worked just as good to spray intake?

Would this work on a 335i?

Would isopropyl alcohol clean the valves?

What you had in that sprayer? the product is only 150ML witch is like a regular glass of water.

cool stuff. Thank you!

That’s been the best spray/liquid valve cleaner I’ve ever seen.

@NATESINTERACTIVEAUTO

5 жыл бұрын

Yes i definitely agree finally some good results

@user-rt4ul3st3q

5 жыл бұрын

NATES INTERACTIVE AUTO you must've check Soft99 G'Zox Injection & carb cleaner

@erwinvanriel5843

4 жыл бұрын

Forte valve cleaner is the best

@NATESINTERACTIVEAUTO

4 жыл бұрын

How long have you used it?

@libertatusinperpetuum2046

4 жыл бұрын

Try CRC Intake Valve cleaner. It has an aerosol can so you don't have to go through all the BS with a roundup weed sprayer. And the heat soak is only an hour. 2 hours seems excessive as you want the engine to still has some heat left in it after the soak so the carbon breaks off the valves and intake ports when you drive it after the soak. 2 hours allows the engine to cool down too much. CRC is much better.

Need to do that a few times to really get the gunk out but it did work extremely well compared to the many hyped up yet dud products out there!

Hi guys, Do you advise me to buy 2006 Lexus GS 300 with GDI engine then do this treatment. Or it's not worth it.

Have you tried doing this with the sea foam in a can?

How often can I apply this sir

You have a oil ctach can and you still have dirty valves?

Can you use this product wash any throttle body?

Wow, will probably just add it to my fuel tank instead of this method, but sure is nice to know that it actually works this well before spending the coin. Thanks for uploading

@jetblackcoopers

2 жыл бұрын

If you own a direct injection car, it wont work by adding it to the fuel tank because direct injection doesn't spray fuel directly onto the intake valves so the cleaner won't ever make it onto the intake valves.

@yannzter

2 жыл бұрын

@@jetblackcoopers so should i spray this thru the manifold?

@yannzter

Жыл бұрын

@@RA82828 thanks for the heads up. I didn’t end up doing it

Can i used Carb & choke cleanner?? Please tell me.. Happy new year 2021....👍👍

Worked really good, although I was surprised you left it at one low steady RPM from start to finish, a lot of other products call for very variations in the RPMs, due to the fact higher RPMs blow out more carbon. What's your thoughts on this?

Have you seen any difference after using this.

Have you done a test with redline fuel system cleaner ?

Ive used engine flush in 05 corolla followed by 2 oil changes. Unbelievable difference

How many miles did you drive after the spray before you took the pictures of the cleaner valves ?

@kavajamusic5411

3 жыл бұрын

this is a crapy product that don`t give any result,. it`s all a big lie

@njoy51

3 жыл бұрын

@@kavajamusic5411 anything for promotion ..lol

@TopherToke

2 жыл бұрын

@@kavajamusic5411 prove it! Please provide your experiment and results!

Did you mix that with water?

What year is this Elantra Gt??

But only on port injected. Right?

shouldn't you spay pass the Mass airflow?

That is a main problem with direct gasoline injection gdi ..its get dirty in remarkable manner all over a fiting chamber.

But the injector ? If you put in air arrive in injector or not?

What about turbo engine?

Can it work with Diesel ? Ford Mondeo MK4?

Is that safe for the maf?

Better then marvel mystery oil?

so you spray after the MAF sensor ?

Is this ok for an old 1999 MX 5?

Thx for the video, but I've a question about can we use the injector cleaner liquid moly in the same way the u did with the valve cleaner?

@gti20vtMarcel

3 жыл бұрын

Of course not, you have to put it into the fuel tank, it has to go THROUGH the injectors!

How does this compare to BG 44

I wish you would have shown more footage of you squirting the fluid down the air intake it was facinating.

I used to remove carbon build up in the 70's by using just plain tap water run through a small vacuum port on the intake after warming the engine to operating temp and driving the car with it connected. It always worked great and wouldn't hurt the engine because it was only connected briefly.

@vikasshelke5544

3 жыл бұрын

Driving in heavy rains at good throttle to o works removing air filter is necessary though .

An this be used in Diesel engines?

Considering you used the gasoline valve cleaner that is supposed to go IN the fuel and not the Proline liquid we use in our Jet clean Tronic it is an amazing result.

@mcroadracer1

2 жыл бұрын

I’ll look into that but looks expensive

@joziksk4323

Жыл бұрын

@@mcroadracer1 6€ 150ml

It was quite exciting love your contents and videos But what did you pore in the white spray jar except the valve cleaner

@NATESINTERACTIVEAUTO

4 жыл бұрын

Thank you what can we try next?

Excellent the best I’ve seen

Could you show how and where you put the borescope in to view the valves. I have a 2016 elantra and the engine looks very similar.

@yanni2112

3 жыл бұрын

Veloster here

@Br3ttBork3r

3 жыл бұрын

Probably take engine cover off and remove a spark plug to see valve. Just my guess though.

@ohboy2592

3 жыл бұрын

Take the intake manifold off or run it through the intake manifold

@mikehigby7897

3 жыл бұрын

Pull the fuel rail with injectors and send the borescope through there. Injectors sit behind intake valve and spray into the combustion chamber for each cylinder

@randellgribben9772

3 жыл бұрын

@@mikehigby7897 try again , please this is a GDI engine..not a port injection engine... take care

Can I use on motocycle(4 stroke) like the video take off the air filter and spray it? Greets from Taiwan~

@POOKIE5592

5 жыл бұрын

Valves still collect carbon deposits. Even on a lawn mower.