I have used both of these programs extensively. I like both of them and use each of them for different reasons.
Жүктеу.....
Пікірлер: 61
@terezapokorna86562 жыл бұрын
Thank you for these helpful videos! I just installed the LaserGRBL and I'm patiently waiting for my engraver machine to arrive :D I love your laugh btw
@soniamuniz28112 жыл бұрын
Thank you thank you. I just got a laser. And your vids are straight forward. THANKS for the comparison.
@Mellowdark173 жыл бұрын
Great video thanks I will use both. I like light-burn as a works space.
@rogercarter62123 жыл бұрын
On light burn you can adjust brightness and contrast, I accidently discovered this... click on the picture, then right click. A window will pop up and near the bottom it will say "adjust picture." Click on that and rhe adjustments can be made there
@cosminnick86722 жыл бұрын
You have a way to adjust the brightness, contrast ... right click on image, adjust image . And you have more options
@schlotdoglaser2 жыл бұрын
good video. I don't version you were using for this demo (probably 09.20 or 24). I believe in 1.0 the adjustment feature was added. Pick the photo and RIGHT MOUSE and pick "ADJUST IMAGE"
@MarcRCAddict2 жыл бұрын
Great video but it’s so confusing lol hopefully when I get my laser and start practicing things will make sense more.
@lizt74442 жыл бұрын
Nice video! I’m new to engraving and still learning my machine…Can you tell me how to keep the transversal lines from engraving?? I have read some suggestions but they are just too detailed for a beginner like me! I have the Ortur Laser Master 2 using both Lightburn and Lasergrbl.
@brakthehun
2 жыл бұрын
Your laser isn't turning off correctly during moves??
@lizt7444
2 жыл бұрын
@@brakthehun that’s correct! Between the moves in the white space, if I’m engraving words, there are lines. In addition , around an object, there is often a shaded border.
@brakthehun
2 жыл бұрын
Sounds like your laser trigger signal isn't working correctly. Does the laser ever turn off??
@lizt7444
2 жыл бұрын
@@brakthehun yes, after about 30-45 seconds which I believe is the default settings. Weird part, I don’t recall this happening initially. I’ve only had my laser for about 3 months and I am still very much a beginner still learning.
@lydiajaramillo75053 жыл бұрын
Another thing to add is that Lightburn only allows you to license 2 computers
@olid69799 ай бұрын
Excellent comparison, I mean once you mentioned lightburn is $40 I was decided 😅 thanks
@23names2 жыл бұрын
GREAT JOB ON THE VIDEO
@nikkicork88153 жыл бұрын
Why not use Shape Properties for images? Gamma, Brightness, Contrast, Enhance and others are there
@brakthehun
3 жыл бұрын
I was not aware. That is useful. Thank you.
@sherribarrett753 жыл бұрын
Hey Tony I am really enjoying your videos, but I am having issues when I go to engrave anything it comes out in reverse, I have tried to read on how to fix it and it is just all too confusing, do you have a video that shows how to change settings on LaserGRBL to where it won't do that?, I can normally figure things out pretty well but this program has me so confused. Thanks for any help.
@brakthehun
3 жыл бұрын
In your console,, try typing in: $3=1 And see if that fixes it.
@sherribarrett75
3 жыл бұрын
@@brakthehun Thank you I will try that
@MrBadSeal
3 жыл бұрын
@@sherribarrett75 well? inquiring minds want to know?
@MatNightingale2 жыл бұрын
I've converted an old unused 3D printer to a small laser engraver using a diode laser, but i'm having issues getting LaserGRBL to recognize it. I can connect and burn with it using Lightburn, but LaserGRBL times out every time, it detects it's connected to COM3 so I know it can at least detect it's presence. The printer runs a variant of Marlin so i've set that in LaserGRBL but have had no luck at all.
@brakthehun
2 жыл бұрын
Gotta run GRBL firmware
@CraftersWindow Жыл бұрын
Great video! Can I upload a svg file with lightburn and/GRBL to laser cut with Atomstack?
@brakthehun
Жыл бұрын
yup!!
@payola5000 Жыл бұрын
Hello, thanks for the video. Is it possible to make grids to test diferent materials on LaserGRBL?
@brakthehun
Жыл бұрын
I believe there are files. I just try things but that's OK.
@payola5000
Жыл бұрын
@@brakthehun thank you, anyways
@taclackrivoglavac39773 жыл бұрын
cant i use it on arduino, or deferent motherboard.. diode module laser or co2....thx
@brakthehun
3 жыл бұрын
There are many boards you can run GRBL on. You can use any of these boards to control a diode or a CO2 with almost all GRBL boards.
@danielperezmateo13112 жыл бұрын
I have a probler with laser grbl don’t making straight lines straights, someone with same issues?
@brakthehun
2 жыл бұрын
X axis?? Y axis??
@knutevensen25648 ай бұрын
Hello - How to reset GRBL configurations (My setup for my Sculpfun S9 is wrong)
@jujucattys1562 жыл бұрын
His m8 is dithering for a laser modual with just two wires + and - and pwm for ones with 3 wires
@69hytek2 жыл бұрын
So......I still need both Great video, a lot of effort has gone into making it. Thanks
@debbiebarnett57295 ай бұрын
You must have and use both for the different abilities?
@ianmallett78UK Жыл бұрын
How much difference is there in the software from 2021 to the 2023 version?
@brakthehun
Жыл бұрын
Not too much. They added some infill options for tracing and some presets for popular brands.
@cinthiajudith48982 жыл бұрын
It’s now $60
@andrealigesaddler83972 жыл бұрын
I’m very new to engraving. I literally know nothing. I just want to engrave words on bamboo candle tops. Is there something for that! I currently have lightburn. I don’t know what to do. Will I be able to even do this?
@brakthehun
2 жыл бұрын
Lightburn is great for this.
@andrealigesaddler8397
2 жыл бұрын
@@brakthehun thank you. I’m trying to engrave but it’s not doing anything. Nothing is showing up on my candle tops. Is there a dummies for lightburn 🤦🏾♀️
@brakthehun
2 жыл бұрын
@@andrealigesaddler8397 what color is the top?? If it's white,, then a blur diode will not engrave it.
@andrealigesaddler8397
2 жыл бұрын
@@brakthehun it’s wood , tan
@brakthehun
2 жыл бұрын
@@andrealigesaddler8397 gotta get a good focus and go slower then.
@FingerBob3 жыл бұрын
Anyone else having issues with LaserGRBL not moving the Z-axis at all?
@brakthehun
3 жыл бұрын
Most Laser control boards do not come with a Z-axis. What board are you using??
@FingerBob
3 жыл бұрын
@@brakthehun Idk about the board, but it's got a z-axis. I'm using a CNC 3018
@alnath01
3 жыл бұрын
@@FingerBob You have to go to menu 'Grbl -> Settings -> Jog control' and activate the "show Z up/down " option.
@FingerBob
3 жыл бұрын
@@alnath01 I'll try that. Thanks man!
@CrazyFuzz8 Жыл бұрын
Do these softwares also work on windows 11?
@brakthehun
Жыл бұрын
I believe so.
@SirMundoSantiago2 жыл бұрын
Thanks for the information, it helps me a lot.
@woodywood19512 жыл бұрын
I'm not sure you can compare them: Laser GRBL is just to convert a picture or anything else and engrave with a laser. You cannot draw with this software. From what I know LightBurn is not free...
@brakthehun
2 жыл бұрын
Agreed. They can both stream to grbl controllers. They are both for lasers,, but they are very much used for different things.
@erniebolado36482 жыл бұрын
I don't quite understand all the functions for lightburn and I don't know how to open gcode files to burn. So I stick with lasergrbl and use easel for all the settings. Lasergrbl can see my gcodes that I generated.
@NinjaNige3 жыл бұрын
Very Nice Video Bro
@jst1man6 ай бұрын
I think you messed some people up when you started going to Light burn and talking about Lasergrbl functions.
Пікірлер: 61
Thank you for these helpful videos! I just installed the LaserGRBL and I'm patiently waiting for my engraver machine to arrive :D I love your laugh btw
Thank you thank you. I just got a laser. And your vids are straight forward. THANKS for the comparison.
Great video thanks I will use both. I like light-burn as a works space.
On light burn you can adjust brightness and contrast, I accidently discovered this... click on the picture, then right click. A window will pop up and near the bottom it will say "adjust picture." Click on that and rhe adjustments can be made there
You have a way to adjust the brightness, contrast ... right click on image, adjust image . And you have more options
good video. I don't version you were using for this demo (probably 09.20 or 24). I believe in 1.0 the adjustment feature was added. Pick the photo and RIGHT MOUSE and pick "ADJUST IMAGE"
Great video but it’s so confusing lol hopefully when I get my laser and start practicing things will make sense more.
Nice video! I’m new to engraving and still learning my machine…Can you tell me how to keep the transversal lines from engraving?? I have read some suggestions but they are just too detailed for a beginner like me! I have the Ortur Laser Master 2 using both Lightburn and Lasergrbl.
@brakthehun
2 жыл бұрын
Your laser isn't turning off correctly during moves??
@lizt7444
2 жыл бұрын
@@brakthehun that’s correct! Between the moves in the white space, if I’m engraving words, there are lines. In addition , around an object, there is often a shaded border.
@brakthehun
2 жыл бұрын
Sounds like your laser trigger signal isn't working correctly. Does the laser ever turn off??
@lizt7444
2 жыл бұрын
@@brakthehun yes, after about 30-45 seconds which I believe is the default settings. Weird part, I don’t recall this happening initially. I’ve only had my laser for about 3 months and I am still very much a beginner still learning.
Another thing to add is that Lightburn only allows you to license 2 computers
Excellent comparison, I mean once you mentioned lightburn is $40 I was decided 😅 thanks
GREAT JOB ON THE VIDEO
Why not use Shape Properties for images? Gamma, Brightness, Contrast, Enhance and others are there
@brakthehun
3 жыл бұрын
I was not aware. That is useful. Thank you.
Hey Tony I am really enjoying your videos, but I am having issues when I go to engrave anything it comes out in reverse, I have tried to read on how to fix it and it is just all too confusing, do you have a video that shows how to change settings on LaserGRBL to where it won't do that?, I can normally figure things out pretty well but this program has me so confused. Thanks for any help.
@brakthehun
3 жыл бұрын
In your console,, try typing in: $3=1 And see if that fixes it.
@sherribarrett75
3 жыл бұрын
@@brakthehun Thank you I will try that
@MrBadSeal
3 жыл бұрын
@@sherribarrett75 well? inquiring minds want to know?
I've converted an old unused 3D printer to a small laser engraver using a diode laser, but i'm having issues getting LaserGRBL to recognize it. I can connect and burn with it using Lightburn, but LaserGRBL times out every time, it detects it's connected to COM3 so I know it can at least detect it's presence. The printer runs a variant of Marlin so i've set that in LaserGRBL but have had no luck at all.
@brakthehun
2 жыл бұрын
Gotta run GRBL firmware
Great video! Can I upload a svg file with lightburn and/GRBL to laser cut with Atomstack?
@brakthehun
Жыл бұрын
yup!!
Hello, thanks for the video. Is it possible to make grids to test diferent materials on LaserGRBL?
@brakthehun
Жыл бұрын
I believe there are files. I just try things but that's OK.
@payola5000
Жыл бұрын
@@brakthehun thank you, anyways
cant i use it on arduino, or deferent motherboard.. diode module laser or co2....thx
@brakthehun
3 жыл бұрын
There are many boards you can run GRBL on. You can use any of these boards to control a diode or a CO2 with almost all GRBL boards.
I have a probler with laser grbl don’t making straight lines straights, someone with same issues?
@brakthehun
2 жыл бұрын
X axis?? Y axis??
Hello - How to reset GRBL configurations (My setup for my Sculpfun S9 is wrong)
His m8 is dithering for a laser modual with just two wires + and - and pwm for ones with 3 wires
So......I still need both Great video, a lot of effort has gone into making it. Thanks
You must have and use both for the different abilities?
How much difference is there in the software from 2021 to the 2023 version?
@brakthehun
Жыл бұрын
Not too much. They added some infill options for tracing and some presets for popular brands.
It’s now $60
I’m very new to engraving. I literally know nothing. I just want to engrave words on bamboo candle tops. Is there something for that! I currently have lightburn. I don’t know what to do. Will I be able to even do this?
@brakthehun
2 жыл бұрын
Lightburn is great for this.
@andrealigesaddler8397
2 жыл бұрын
@@brakthehun thank you. I’m trying to engrave but it’s not doing anything. Nothing is showing up on my candle tops. Is there a dummies for lightburn 🤦🏾♀️
@brakthehun
2 жыл бұрын
@@andrealigesaddler8397 what color is the top?? If it's white,, then a blur diode will not engrave it.
@andrealigesaddler8397
2 жыл бұрын
@@brakthehun it’s wood , tan
@brakthehun
2 жыл бұрын
@@andrealigesaddler8397 gotta get a good focus and go slower then.
Anyone else having issues with LaserGRBL not moving the Z-axis at all?
@brakthehun
3 жыл бұрын
Most Laser control boards do not come with a Z-axis. What board are you using??
@FingerBob
3 жыл бұрын
@@brakthehun Idk about the board, but it's got a z-axis. I'm using a CNC 3018
@alnath01
3 жыл бұрын
@@FingerBob You have to go to menu 'Grbl -> Settings -> Jog control' and activate the "show Z up/down " option.
@FingerBob
3 жыл бұрын
@@alnath01 I'll try that. Thanks man!
Do these softwares also work on windows 11?
@brakthehun
Жыл бұрын
I believe so.
Thanks for the information, it helps me a lot.
I'm not sure you can compare them: Laser GRBL is just to convert a picture or anything else and engrave with a laser. You cannot draw with this software. From what I know LightBurn is not free...
@brakthehun
2 жыл бұрын
Agreed. They can both stream to grbl controllers. They are both for lasers,, but they are very much used for different things.
I don't quite understand all the functions for lightburn and I don't know how to open gcode files to burn. So I stick with lasergrbl and use easel for all the settings. Lasergrbl can see my gcodes that I generated.
Very Nice Video Bro
I think you messed some people up when you started going to Light burn and talking about Lasergrbl functions.
right click, adjust image. lightburn