This is how you make a KZread video. To the point with solid explanation clear and coherently

@WanderlostOverland

2 жыл бұрын

We really appreciate that!

Love the 4Runner content. Your dialogue, concise delivery and stage lighting have improved tremendously in the last couple of years. Congrats!!! 👏

@WanderlostOverland

2 жыл бұрын

Much appreciated!

I worked at a shop in Utah where we did work on vehicles used from camping to MOAB Rock Crawlers. As a result, my experience with the use of wheel "spacers" is 50/50 because some vehicles experienced premature wear to their wheel bearings while other vehicles did not. I suspect this wear was due to two things, the quality or lack thereof of the wheel bearings and the vehicles' GVW (gross vehicle weight). That's all I can think of as o why the bearings failed. Did you have premature wear of your wheel bearings? BTW, I just purchased a 2008 4Runner that I will be playing with and I am a NEW SUBSCRIBER! Great Channel!!!!!!!!!!!!!!!!!

great to see you guys again...it's been awhile! I have been running without a front swaybar on my 4runner for a few years now. it definitely is an acquired feel and not for everyone. I look forward to your reviews of these products!

@WanderlostOverland

2 жыл бұрын

Welcome back!

Love this video! Good job guys of laying down some good info! Still don't agree with your sway bar link choice, but the rest is spot on!

Can't wait to new updates to the 4runner! I've been thinking of getting aftermarket lower control arms as well to increase ground clearance a tad bit on my FJ cruiser as well.

@WanderlostOverland

2 жыл бұрын

That would be cool!

Always something cool to do to my 17 4runner.

I have the total chaos lca’s with uniballs and fabtech uca’s with uniball and I just use ptfe (Teflon) dry lube on them every week or two and I’ve had zero issues (knock on wood) with them.

Gracias thank

great video. what are your thoughts about diff drop kits?

@WanderlostOverland

2 жыл бұрын

Won’t hurt to use a diff drop kit, if it helps is debatable.

Did you think about SEND IT suspension welded spindles, and if so why not use them?

Are you switching to the forged ball joints over the heim joint links? My front driver said is making some noise to looking to replace, curious which one to go with.

👍

On a side note: I thought you guys installed a rear diff skid. I’ve look all over your videos and I can’t find it.

@WanderlostOverland

Жыл бұрын

Nope not yet. We do have one sitting on the bench right now though. We'll be putting it on within a few weeks. Stay tuned!

Merri proof!! Lmbo

Nice haircut!

@WanderlostOverland

2 жыл бұрын

Thanks!

I have a fox 2.0 lift with spc uca. Mine squeak a lot. What’s the fix?

@aaronqueen55

2 жыл бұрын

I watched the video and saw you said what to do about squeaking. Thanks.

I’m wondering, from what lift height would you recommend to drop the front differential?

@WanderlostOverland

2 жыл бұрын

I'm assuming you mean the typical "diff drop kit" that a lot of people use. This kit only drops the front of the diff, lowering it at an angle. These are for the normal 3" lift in the front. Our advice; if you have the kit put it on, won't hurt anything. We're not totally convinced that they do any good however.

@natalied989

Жыл бұрын

Did you ever make a video on how to install the new control arm and cam bolts? There was no link in this video and I didn't see it in your video list. My have missed it though. Thanks.

hello, can you give us an update on those storage boxes? I submitted my email but haven't received any new updates. thanks

@WanderlostOverland

2 жыл бұрын

We haven't heard anything yet. These things take time.

I have an issue on my 17 4r where there's juttering/shaking under braking only between 40-70kmph. I've replaced my rotors, pads, calipers, hubs and bearings! nothing is showing signs of wear and it's driving me nuts! any ideas? thanks!

@WanderlostOverland

2 жыл бұрын

No idea, sorry.

@richardstone5241

2 жыл бұрын

1. Make sure your tires are properly balanced, if they are then: 2. Since you have replaced all of your brake components start THOROUGHLY checking ALL of your STEERING components.

@ACEventure

2 жыл бұрын

I had this not on my 4R but on my audi, it ended up being warped rotors that were pretty new, no idea how i warped them.

I see y’all aren’t running OCD sway bar links up front. Any reason for that?

@WanderlostOverland

2 жыл бұрын

No real reason. We may put some on soon.

@jonathandearth4865

2 жыл бұрын

@@WanderlostOverland I heard the fronts back out and destroy your CV boots from 3 different people who ran them. Wondered if you two had the same experience.

@WanderlostOverland

2 жыл бұрын

We’ve never had any problems with the nuts coming loose. That’s only happens when there isn’t red loctite used and/or they aren’t inspected and lubed regularly

@peterbrinkman6866

2 жыл бұрын

@@jonathandearth4865 I had the front nuts loosen up and cause the links to make a loud noise when turning. I didn’t know what it was at first and took it to a shop where they tightened them

Link?

@WanderlostOverland

2 жыл бұрын

Hi, not yet. We will be filming this over the next few weeks, but stay tuned.