lifted dodge dakota 4x4

Автокөліктер мен көлік құралдары

2001 dodge Dakota ext cab 4x4 4.7 v8 5 speed. has 9.2 inch 392 LSD in the rear. Has shift on the fly 4x4. Flowmaster 40 with 3rd cat delete. 3 inch suspension lift running 33 inch mud terrains. Sorry for the video cut out I ran out of space on my phone. Comment with any questions!

Пікірлер: 87

  • @CookedTickabc
    @CookedTickabc9 жыл бұрын

    nice dark garnet red pearl paint. LOVE THAT COLOR

  • @samuelsherwood298
    @samuelsherwood29811 ай бұрын

    Right on, I've got a 98 4x4 sport with 5.2l or 318 magnum, cats out with k@n fi.ter and intake pipe, she's kinda raunchy lol figure im running close to 300hp but for a light weight dakota thats not bad.

  • @izaconvato
    @izaconvato Жыл бұрын

    Good looking pick up brotha!🙌🏼🙌🏼

  • @tymckinney3865
    @tymckinney386511 жыл бұрын

    Like the exhaust, I'm probably getting a dakota for my first car and i think I'm goin for a flowmaster, nice truck and sounds good

  • @CoryCDS
    @CoryCDS7 жыл бұрын

    nice truck im rebuilding mine almost everything except motor and gonna repaint it soon

  • @TCCcholo
    @TCCcholo11 жыл бұрын

    Sick truck. Best looking truck you can buy

  • @Melo_EL
    @Melo_EL11 ай бұрын

    She purdy!

  • @MrYamaha4life
    @MrYamaha4life11 жыл бұрын

    @WeDriveTrucks yea I checked it out. sounds good for a v6 lol just don't crank the t bars up to much because it puts too much stress on the ball joints and cv axle angle is all wack. that's what I planned on doing to mine, but I sold her:/ looks good tho good luck with it

  • @1blkpear
    @1blkpear6 жыл бұрын

    I had a 2000 Durango 4.7 4x4 and loved it. Broke down and now looking to get another. I am looking for any shock absorbers with a coil over to help ease the pressure on the torsion bars

  • @ikambor
    @ikambor10 жыл бұрын

    i have the 2001 quad cab... candy apple red,, now has 78,000 miles on it had 56k when i bought it, i really love it,,best truck ever

  • @CuttinChris
    @CuttinChris6 жыл бұрын

    dude I've had 3 1st Gen Dakota over 8 or 9 years and I've been wondering if 33 10.50 would fit for so long. thanks for posting this

  • @mattanderson9421
    @mattanderson94217 жыл бұрын

    Nice looking ride!

  • @jaredboulanger9027
    @jaredboulanger90276 жыл бұрын

    Iv got a single cab 99 5speed 4xr right now add a leaf kit 3in block kit and maxxed out front tbars i sit at 5in and 35in tires that dont rub

  • @CuttinChris

    @CuttinChris

    6 жыл бұрын

    jared boulanger got any videos up sounds sick

  • @MrYamaha4life
    @MrYamaha4life10 жыл бұрын

    @randomvideos28 it's pretty easy to put on. Just make sure you have the torsion bar tool. And yea all you need is the new longer shocks, the rear blocks, and the front keys. I swear it rode better than stock lol

  • @MrYamaha4life
    @MrYamaha4life11 жыл бұрын

    @WeDriveTrucks I don't remember but I know many people who have bought from them. I've actually called once and talked to somebody. my lift came separate from my socks. two separate boxes. it was sketchy but the shocks came two days later. I'd personally rate them 5 stars

  • @muddrifter1
    @muddrifter112 жыл бұрын

    Thanks for the tire info

  • @micheleprestigomo4186
    @micheleprestigomo41867 жыл бұрын

    Nice Ride!

  • @stealthenforcer1907
    @stealthenforcer19073 жыл бұрын

    Mmm I've got this exact trim and color, so pretty, only got rwd 3.9 tho😥

  • @paul_zr1
    @paul_zr19 жыл бұрын

    I'm over in Sussex County. I might be getting a 2000 Dakota 5spd 4x4

  • @AFXGaming
    @AFXGaming2 жыл бұрын

    Nice looking rig, I've got a 99 SLT 4x4 with the 5.2l v8, been wondering what I could fit with a 3 inch lift on the front. The 33s look nice. I've got 31x10.5 falken AT3s on right now at stock height so with 3 inches of lift I'd say the 33s would fit without rubbing for sure

  • @MrYamaha4life
    @MrYamaha4life11 жыл бұрын

    @blahblahblah5377 you might be able to fit them in the back, if so it'd be tight. but for the back, if you want to lift it then you put blocks in between the leaf springs and the axle. you can get them off eBay for like 40 bucks

  • @MrYamaha4life
    @MrYamaha4life11 жыл бұрын

    @hockeyfreak043 not difficult at all. Back is easy. Just make sure you have the t-bar too to do it. And it's easier with air tool but you can do it with a breaker bar. Just a lot more work.

  • @MrYamaha4life
    @MrYamaha4life10 жыл бұрын

    @cyautomobile69 I forget exactly how long it took but they sent me them but I only received the front at first and I got the back like 2 days later. I'm right in the same area tho I'm in jersey

  • @cowgirl021989
    @cowgirl02198911 жыл бұрын

    after market with blocks in the back

  • @kylejohnson1097
    @kylejohnson10975 жыл бұрын

    Manz got a dirty engine

  • @jakeelliott781
    @jakeelliott7818 жыл бұрын

    Sick truck, man. I've got the 03 slt 4.7l. It's a 2wd but still great for hauling. I've been looking to put a 3 inch lift and MagnaFlow exhaust in it soon. Would love some advice.

  • @scottsquires4533
    @scottsquires453310 жыл бұрын

    @mrdead212 I put an engine in it at 150k. My engine ran beautifully but I hydro locked it being an idiot. I would deffinetely say they're reliable. I miss this truck more than anything lol

  • @blahblahblah5377
    @blahblahblah537711 жыл бұрын

    ya i got my torsion keys off ebay for like 40 bucks haha. n it looks like i have tons of room in the back but i was just wondering. thanks

  • @BeatAssDude
    @BeatAssDude7 жыл бұрын

    So the dodge dakota adrenaline lift will actually lift it no bullshit. I only want to get like 2 inches out of it plus my 3 body lift

  • @randomvideos28
    @randomvideos2810 жыл бұрын

    Nice truck man!! I got a 2003 Dakota quad cab 4x4 and I'm looking at putting this adrenaline lift in it. Just wondering all I need is the kit and shocks?? Anything else and how easy was it to install? Thanks

  • @joey-cn6mt
    @joey-cn6mt8 ай бұрын

    How did the lift affect the handling??

  • @MohrRacing2
    @MohrRacing26 жыл бұрын

    Do you need to do anything to the rear end like different gears in the back for the 3in lift??

  • @arod7442
    @arod74424 жыл бұрын

    Update on truck please.

  • @MrYamaha4life
    @MrYamaha4life12 жыл бұрын

    @bdhoover90 no I don't have that problem. do you have the after market keys? or did you just crank yours up?

  • @ThomasXp
    @ThomasXp8 жыл бұрын

    does it rub over bumps? Going to try to fit 33s on my first gen. Got lift keys coming and Im totally not afraid to cut haha.

  • @loganklein5164
    @loganklein51649 жыл бұрын

    Where did you find the lift kit at?

  • @gak2215
    @gak22154 жыл бұрын

    Could you possibly tell me what you used to lift up the front end.? Do you have torsion bars?

  • @trevortharp2641
    @trevortharp264110 жыл бұрын

    Were did you get your lift or any budy looking to lift my dodge Dakota 4wd let me know need help

  • @Cyautomobile69
    @Cyautomobile6910 жыл бұрын

    Hey man how long did it take you to get your lift kit from adrenaline motorsports, I ordered mine about 2 weeks ago and I can't contact them at all. I live in the PA area. I have a 98 dodge dakota sport.

  • @crs_19_irock31
    @crs_19_irock313 жыл бұрын

    What kind of tires you have on it

  • @GoProBros9
    @GoProBros99 жыл бұрын

    MrYamaha4life when you first had your 33s did you rub at all, if not do you rub when you flex

  • @ItsJonahh
    @ItsJonahh11 жыл бұрын

    I have a question about the lift. Can you install it in your driveway with a jack and a few jack stands? Or do you need one of those sky lifts to raise the truck up off the ground to install it?

  • @Flintdad76
    @Flintdad763 жыл бұрын

    how did you get around the front bump stop i am running into that problem

  • @blahblahblah5377
    @blahblahblah537711 жыл бұрын

    i have a 2000 dakota 4x4 on 31's right now and i put new torsion keys on it to level the front out but i dont have anything to lift the bed. just wondering if i can fit 33's or if i need to lift my bed

  • @mrdeath212
    @mrdeath21210 жыл бұрын

    thats one badass truck. how many miles were on the truck when you had the new engine put in? sounds expensive. i was going to buy a 2004 dodge dakota sxt reg cab 116k miles 5 speed 4x4, but im not sure how reliable they are.

  • @finessed_lines4292

    @finessed_lines4292

    6 жыл бұрын

    mrdeath212 I got one with a lil over 200 thousands miles

  • @kobemunn6508

    @kobemunn6508

    4 жыл бұрын

    Years late, but for anyone else reading, mines got 215k+, and I'm still willing to put bunch of money into bumpers and a lift, and other fun stuff for it, cause she's still worth it

  • @HDnUmBeR2
    @HDnUmBeR211 жыл бұрын

    you could eat off the motor compared to mine! 234k and counting. Canadian winters brutal n it!

  • @FlightMedic406
    @FlightMedic4063 жыл бұрын

    Do the front tires rub when turning

  • @MrYamaha4life
    @MrYamaha4life11 жыл бұрын

    @WeDriveTrucks I would deffinetely say it's worth it only because your truck probably rides like shit (no offense) with the torsion keys turned all the up. the aftermarket keys will give you more height if you turn them all the way up but then your front end will fall apart. but if you put them at the recommended height then youl sit as high as you are now with them all the way up and your ride will be way better

  • @mike9713
    @mike97134 жыл бұрын

    Does it look taller than it did when you put the lift kit in?

  • @jaredboulanger9027
    @jaredboulanger90276 жыл бұрын

    To everyone asking about the lift all u need to do is to crank ur stock keys each turn is 1/4in lift and buy a block kit and ubolts they come in 1in 1.5 2 2.5 3in blocks for the rear axle $70 and u have 3in lift there is nonneed for aftermarket keys stock ones are just fine the aftermarket ones won't lift it any higher than the stock ones... Iv had 3bdakotas and 9 duramgos their all the same its a scam to make money off u... Use stock keys and a $70 block and bolt kit thats all u need

  • @jorgevalenzuela8968
    @jorgevalenzuela89686 жыл бұрын

    Wheels 16

  • @bdhoover90
    @bdhoover9012 жыл бұрын

    i have same lift and shocks. did u have any problem in th front? my a arm is sitting on my droop stop (rough ride)

  • @Belford3FyrFytr
    @Belford3FyrFytr11 жыл бұрын

    Hey I see you live in N.J. how many tickets have you gotten runnin no front license plate and heavily tinted front windows? I hate our front plate requirement, but i think some people get away with puttin it on the dash, who knows. Nice truck though, take care.

  • @boonehoneycutt80
    @boonehoneycutt808 жыл бұрын

    hey did the 3inch kit cause to much angel on the CVs or was it ok

  • @MrYamaha4life

    @MrYamaha4life

    8 жыл бұрын

    Don't crank them too much and you will be fine. But I suggest replacing upper and lower ball joints before the lift. But like I said only go up like 1.5 inches and you will be fine

  • @wezsal
    @wezsal6 жыл бұрын

    Where did you by the lift?

  • @Cyautomobile69
    @Cyautomobile6910 жыл бұрын

    Thanks man, I plan to hit the pine barrens after I get it lifted

  • @ArtvsGames
    @ArtvsGames8 жыл бұрын

    What's the size of the tool box

  • @hockeyfreak043
    @hockeyfreak04311 жыл бұрын

    how hard was it to put the lift on it ?

  • @bbsmyname
    @bbsmyname8 жыл бұрын

    Nice Dakota! Do you still have it? Looking to buy a Dakota myself. I was originally looking for a Nissan titian but I test drove a Dakota and I loved the size. Wouldn't want the v6 though v8 all the way baby.

  • @nicholasbridgeman1392

    @nicholasbridgeman1392

    8 жыл бұрын

    I've got a v6 Dakota and it got a lot more power then you would think. Wouldn't want to pull nothing with it but it's got pleantly of power.

  • @ethandips7096
    @ethandips70963 жыл бұрын

    How wide are the tires

  • @edgardlopez4176
    @edgardlopez41764 жыл бұрын

    Where did you get the lift kit

  • @kyletudge9750
    @kyletudge97508 жыл бұрын

    What is the lift kit brand name

  • @tommyhurtt9852
    @tommyhurtt98526 жыл бұрын

    what exhaust are you running

  • @BeboAltizer
    @BeboAltizer11 жыл бұрын

    how much did that lift run you?

  • @smalltownsquarebody550
    @smalltownsquarebody5507 жыл бұрын

    Does it eat cvs?

  • @joshuarobinson8363
    @joshuarobinson83634 жыл бұрын

    Whats ur gas mileage??

  • @ElemenohpeeHD
    @ElemenohpeeHD11 жыл бұрын

    the tires dont rub a shit load without body lift??

  • @92clintonr

    @92clintonr

    4 жыл бұрын

    They're only 10.5 wide so no

  • @Bananareefer
    @Bananareefer9 жыл бұрын

    are they 33 by 12.5?

  • @japaneeseteabag6473

    @japaneeseteabag6473

    9 жыл бұрын

    33 by 10.5

  • @japaneeseteabag6473

    @japaneeseteabag6473

    9 жыл бұрын

    im about to install my 3" suspension lift and but 33 by 11.5 mud terrain federals

  • @japaneeseteabag6473

    @japaneeseteabag6473

    9 жыл бұрын

    Japaneese TeaBAG put*

  • @MrYamaha4life
    @MrYamaha4life11 жыл бұрын

    @brad11344 you drive a single cab step side f150. Sounds like shit and it doesn't get any uglier than that. And @blue32hike I used to work at a detail shop so I always washed mine twice

  • @HaloHamstur
    @HaloHamstur11 жыл бұрын

    Says the guy with the F150 that sounds like shit. You need to drop some money into that piece.

  • @13bHappy
    @13bHappy5 жыл бұрын

    Anyway you can help getting me a 5 speed trans

  • @dieseldelany71
    @dieseldelany7111 жыл бұрын

    No wonder you fucked up your last motor raw dogging in like that

  • @brad11344
    @brad1134411 жыл бұрын

    why would you drop any money into a dodge?

  • @raywilsonsr1239
    @raywilsonsr12394 жыл бұрын

    Dont post a video if you're not going to respond to viewers comments and questions. Damn...

  • @MrYamaha4life

    @MrYamaha4life

    4 жыл бұрын

    Hey pal look at the date the video was posted.. piss off

Келесі