Holy Mother of Pearl. Could they have made this any harder to get to?!

Photography and mechanical assembly and disassembly were the bestI’ve ever seen so far. Thank you for an excellent job

You Sr. Are a rockstar. Thank you so much for taking the time and effort to provide this helpful information.

This was the best video ever....we fixed our dryer with ease...Thank you for making such a good video!

One of the best how-tos I ever saw. Thanks for the hundreds of dollars you just saved me.

Awesome video and perfect camera angles. One of the best! Only part missing is which side of the belt faces the drum vs pulley. Thanks for an amazing video!

Thank you so much for your video clip, that really helpful.

Very helpful video Thank You

Thanks. Very clear and helpful

Boy this is an awesome video but how come I’m watching this after I fixed my dryer?

Good video! Thank you!!

Followed this exactly and it was easy and complete. While I was in there I replaced the thermostat, the thermo fuse and the thermistor. One thing that surprised me was the amount of lint inside the dryer, especially on top of the heater housing where it was scorched.

@FixDotCom

2 жыл бұрын

Yes, there seems to be lint everywhere when you go to take apart a dryer! Glad our video was helpful!

Hi I have the same dryer with the true steam. The upper left corner has a drawer for water. How do you take this unit apart. I want to clean the inside bottom of all the lint that has built up. thank you

Thanks. Will this work on the model DLEX2650R?

I have a LG DLEX8000V model dryer I order the main board because drum would not turn and it was making 3 clicking noise on main board but after I install the new board it did same thing, do you know what is wrong with my dryer I sure appreciate your help.

LG dryer steam cycles are not working any ideas? Model DLEX3470V.

Real nice video what is that other part mounted on the blower? should that also be replaced since we are that deep into the dryer steve? Thanks -PawPaw

Any tips on testing the Thermistor to verify it is bad or good?

@devinsorbo

2 жыл бұрын

Im sure you've solved it by now, but for future readers: Test it with an ohmmeter. It should change resistance depending on the temp. If it doesnt, or it's open the whole time, its bad.

👍🏽

How do I tell if the thermistor is why I am getting no heat or if it’s another problem?

@FixDotCom

2 жыл бұрын

Thermistor can be checked with a multimeter, should read around 1K at room temp, use your meter on continuity with the thermistor disconnected from the rest of the dryer. See what reading your getting, hold the probe end in your fingers tightly and you should see the resistance change and go back when you release it. No no heat I be likely to be checking continuity on the element and other thermostats. If its an electric dryer check your fuse panel in the home to be sure you have 220v going to the dryer, most electric dryers will run but not heat on only one fuse. Good luck

🔵YOU PRACTICALLY HAVE TO TAKE APART THE WHOLE DRYER TO REPLACE THE THERMISTOR WHEN ALL THEY HAD TO DO WHEN THEY BUILT THIS DRYER WAS BUILT A REMOVABLE ACCESS PANEL AT THE LOWER REAR OF THE DRYER LIKE WHIRPOOL DRYERS, THAT WAY IS ASSESIBLE TO INSPECT AND REPLACE THE COMPONETS, HEATER, MOTOR, ETC WITHOUT DISASSEMBLING THE WHOLE DRYER..🔴