lewmar hatch leak - mounting a new gasket

In the summer 2017 I sealed the hatch with some butyl sealant and sikaflex 295 UV but the humidity levels are now to unevenly so I change the rubber gasket to a new one.
This is the first time I do a hatch gasket change so I don't know how tight it must be.
After completion of the filming and editing I plan to make it more tight so the gasket will hold it self on the acrylic glass plate.
I have measured the old gasket and it is 188 cm. long.
The glue I used is Loctite ALL PLASTICS : www.loctiteproducts.com/p/sg_p...
Rubber gasket : www.svb.de/de/lewmar-dichtung...
Rubber for one hatch : 38 US Dollars
Loctite all plastics glue : 11 US Dollars

Пікірлер: 20

  • @patricklaine6958
    @patricklaine69586 жыл бұрын

    Very informative as usual Tino. I haven't yet had to change a Lewmar hatch joint on my boat yet, but now feel confident I'll be able to do it. Many thanks

  • @twiper

    @twiper

    6 жыл бұрын

    Thanks. Next Friday I show someting I did not notice when I first mounted the gasket, but also hard to know when there is no information on the subject anywhere.

  • @richardjames7916
    @richardjames79165 жыл бұрын

    Thanks Tino.

  • @jcvdongen
    @jcvdongen2 жыл бұрын

    Very clear video. Thank you!

  • @robertozorzin1533
    @robertozorzin15334 жыл бұрын

    Very interesting...good work!!! Thank you so much.

  • @svidos
    @svidos3 жыл бұрын

    Awesome instruction. great job Thank you.

  • @marccohen5579
    @marccohen55793 жыл бұрын

    The gasket needs to be very tight. Use silicone grease when putting the frame back together.

  • @twiper

    @twiper

    3 жыл бұрын

    Thanks for the info :)

  • @JumalanKasi
    @JumalanKasi4 жыл бұрын

    Hi Tino! Im doing same fix for my B37 2002. Im ordering gasket from SVB, they are selling low profile and medium profile gaskets, wich one is the correct one?

  • @twiper

    @twiper

    4 жыл бұрын

    The right one is low profile with 5 barbs. Remember when you slide on the frame it must sit pretty tight around the gasket, if not the hatch will leak. If so you can put on some butyl tape on the edge under the gasket to get a perfect seal. Just don't apply to much as I did in this video :) kzread.info/dash/bejne/gaCexqmRYpbAZps.html

  • @LNispeakers
    @LNispeakers2 жыл бұрын

    Hej Tino, tak for videoen som er guld værd - jeg står og skal lave det samme i min båd, og har 3 skylights (samme Lewmar) der skal have nye pakninger. Hvor købte du de 5 meter pakning?

  • @twiper

    @twiper

    2 жыл бұрын

    Jeg købte pakningen ved svb.de. Det som fik lugen tæt var dog først da jeg lagde butyltape mellem glasset og pakningen. Mener jeg viser det i video "lewmar hatch leak 3/3"

  • @LNispeakers

    @LNispeakers

    2 жыл бұрын

    @@twiper Tak Tino - jeg var stadig ved den første video ;) Tænker jeg vil forsøge med silikone fedt, om ikke det kan få den tæt.

  • @MichaelDodwell
    @MichaelDodwell6 жыл бұрын

    Would using a heat gun help mold the rubber so it's not lifted on the courners?

  • @twiper

    @twiper

    6 жыл бұрын

    Yes maybe it is the right way to do it.

  • @MichaelDodwell

    @MichaelDodwell

    6 жыл бұрын

    Love the videos btw. We've a 2003 38 bavaria nice to see you undertaking the tasks we also need to carry out and documenting it so well. Keep it up.

  • @twiper

    @twiper

    6 жыл бұрын

    Thanks. Yes I like to make videos about fixing problems many people have on their boats. There is some videos out there but they are not very clear and they often rush over important details.

  • @TheKalleemil
    @TheKalleemil6 жыл бұрын

    Hej du God video 👍 Har lige et spørgsmål arbejder du ved jernbanen? Jeg spørger fordi jeg så din tommelstok.

  • @TheKalleemil

    @TheKalleemil

    6 жыл бұрын

    Tino G - Sailing Ok, så bare at det er en " jernbanen tommelstok " du brugte, pga det mål / streger der er på din.

  • @twiper

    @twiper

    6 жыл бұрын

    Ok.