Let's Make An Inside Corner In A Custom Box Gutter | Tutorial At The 509
Тәжірибелік нұсқаулар және стиль
In this video I will show you how I make inside corners, or miters, in a custom box aluminum gutter.
#barkriverknives #fixedblade #cubedc #3v #magnacut #spyderco #bladesteel #strop #customsheetmetal #seamlessgutter #downspouts #gutter #sheetmetal #shrinkerstretcher #atthe509 #flashing #circletopwindowflashing #sheetmetalhem #spacer #circletopdoorflashing #viral #viralvideo #project #customerorder #sheetmetalshear #scribe #efficiency #jadeg10 #blackcanvasmicarta
Пікірлер: 11
💯💯💯
im a 20 year gutter contractor in fresno. love seeing your stuff.
Thanks for that! I am installing a box gutter on my patio roof here in Melbourne, Australia. This was very helpful. I am sure that I will watch it again before I attempt it.
@at-the-509
Жыл бұрын
That’s awesome Gary, let me know if you have any questions!
Thanks man needed this on my ac install today
You make it very easy 👍🏼
Great video. Can you do a k-style gutter just like that? Other videos cut two 45 with tabs and join them. I like your method better.
@at-the-509
Жыл бұрын
Yes they’re done pretty much the same way but you should probably try it on a scrap piece first for practice.
Thanks for sharing. Is the bottom 45 angle? Then the front is a straight line up from the 45 angle? I need to do it myself. The contractor disappeared after taking down some portion of the gutters. Another charges us so expensively.
@at-the-509
Жыл бұрын
Yes, if you need the finished product to be 90 degrees then you need to cut it at a 45 degree angle on each side of the center line on the bottom and then if it’s a square gutter like the one I showed then yes draw a straight line up the front. Don’t forget to leave a little bit of material on one side for an overlap or a “tab”.
@sklee1644
Жыл бұрын
@@at-the-509thanks so much.