This guy seriously has his setup and practices dialed in, cool to see the craftsmanship

Thanks for share your experience, I am Brazilian and I have lived here in the United States for three years and I work with gutter installations.

That’s video was 💯% on point every step of the way 👍🏼 Thank you bro

Thank you for being very detailed. I learned many techniques as if I was sitting in a classroom and not at home.

@NewTechMachinery

3 жыл бұрын

Thanks, we appreciate that!

Would love to see more of your set up. I love it

I neeed that gutter set up

Very professional brother

very good, I work with gutters in Brazil too good job

Maaaaan you got the setup!

@Ebud2010

4 жыл бұрын

Where can we get one?

Saludos amigo y gracias por tus vídeos de cómo mostrar para hacer el

How do you install the saw meter?

thank you . now i know how to install corner gutter .. but we don't have a gutter machene here in phillipines .. but also thank you bro you give me a idea how to do it .. god bless .. 😁😁

@ZvonimirAnn

4 жыл бұрын

Show me your work bro..

@robertsmith-gp6lc

4 жыл бұрын

this is a very slow way to join the corners most installers use pre formed strip miters now and dont even know how to cut tabs . flap bender ? they are tongs in the U.S.A.

@ZvonimirAnn

4 жыл бұрын

@@robertsmith-gp6lc but it doesnt looks nice to me that new way

@CasparRoofingChannel

3 жыл бұрын

Someday bro.. i will biy for that we need that here in the Philippines

I’m starting this trade next week wish me luck

It is very good way to do inside/out side corner that way, but brother it kinda old school now . Most people just just strip miter or box miter. I guess whichever way easier for you. Very good setup for gutter machines. I’m impressed 👍

I want to learn more about your truck layout.

Excelente trabajo y muy buena idea gracias por compartir

How long does it take to cut both corners and get ready for installation?

Qual tipo de chapa é usado nas calhas ?

What brand is your flap bend tool?

is the saw blade your using the same blade use for cutting wood ? thanks brother. from cebu phillipines

@odtuhan

2 жыл бұрын

Oo

Is the process the same for "K" profile gutter? Thank you. Great video

@NewTechMachinery

4 жыл бұрын

Hi Pete, yes the procedure is the same for K-style gutters. Thanks for your comments!

@ThePete1891

3 жыл бұрын

@Eddie Saint why would you want to do that? If you dont trust her, mabey she is not the one for you. Why are you wasting her time? Yours also. What you really should do, is got get one of these multi pro machines. Then you'd have zero trouble finding quality gal. Good luck.

the style of the gutter looks better than o g .

Thanks for the info Hi Bro, I am roofing contractor here in the Philippines. Hope i can produce that machine.

@NewTechMachinery

3 жыл бұрын

You can reach us through our website at www.NewTechMachinery.com. Thanks!

Hey what material are you useing i didnt no that those saw can cut metal?

@NewTechMachinery

3 жыл бұрын

Our gutter machines can run painted steel, painted aluminum, or copper. Reach out if you need further assistance at Sales@NewTechMachinery.com thanks!

Hi good

Very interesting.....how much does the complete truck with machine cost ?

@NewTechMachinery

2 жыл бұрын

The truck was put together by one of our customers, so can't help you with that. You can contact us through our website for more information on our seamless gutter machines at www.NewTechMachinery.com. Thanks!

do you silicone after everything is all installed? so no silicone actually between the joints?

@NewTechMachinery

Жыл бұрын

Hello, not sure about the silicone as we're the machine manufacturer and not the installer. May be best to check with your local coil supplier to get their recommendations too. Thanks!

Do you have a video on how to do a miter joint on a 45 deg corner?

@NewTechMachinery

3 жыл бұрын

Sorry we don't Danny.

@brucecovell5909

3 жыл бұрын

@@NewTechMachinery Would not just setting the saw to 22.5 degrees for both the inside and outside corners and following the same steps in bending as with the 90 degree corner....

What size is your miter saw? What size do you recommend for 5 & 6 gutter? Because using a chop saw saves at least 10 - 15 minutes!!!

@NewTechMachinery

3 жыл бұрын

The miter saw here is a 14" miter saw and that's what we'd recommend for 5" and 6" Fascia or K-style gutters.

@Thiirtydi3d

3 жыл бұрын

Thanks, that setup is crazy man

What brand and model saw blade do you prefer and how many teeth? Great video!

@NewTechMachinery

2 жыл бұрын

It is a Makita 14" Miter Saw (model # LS-1440).

@patrickmadrid7594

2 жыл бұрын

@@NewTechMachinery Thank you what saw blade brand and how many teeth on the blade? Thanks.

@NewTechMachinery

2 жыл бұрын

@@patrickmadrid7594 We recommend the Makita 14" blade part # 792699-2. Any Makita dealer/distributor should be able to assist you with that.

Slow down when showing pls! Good video

How much does just the NTM gutter machine cost new??

@NewTechMachinery

4 жыл бұрын

Please reach out to us at Sales@NewTechMachinery.com and we can provide you with all the information you need, thanks!

How much would it cost to have that piece made and replaced on a corner piece that has been damaged

@pixellee5242

3 жыл бұрын

That varies greatly. Cheapest and easiest solution would be to get a strip or box miter if that'll cover the damage. Otherwise you could make a patch but you'll have a seam, unless you replace the full length of the damaged piece(s).. so anywhere between a few bucks to a few hundred.. if you have a company replace the full pieces that are damaged, could even be over a thousand..

oh, nice. No inside flaps, but the bead of caulk holds up ok? That's a lot faster, and clean looking with no screws. I'd like to know how long that lasts without a leak appearing.

@robertsmith-gp6lc

4 жыл бұрын

outdated method the saw is good but hand cutting tabs too slow.

@paulepling

4 жыл бұрын

@@robertsmith-gp6lc it's not that slow, and if it saves from a go back complaint, I'm using at least one tab somewhere

@zackgreen3916

3 жыл бұрын

It depends. I just did a clean and reseal on a house with corners done like this, they had 6 failed corners out of 12. The gutters were about 20-25 years old. The corners that failed (3 outside and 3 inside) were all on long runs (one or both sides over 35 ft). Thermal expansion had seperated the gutter from the sealant on the face seal of the inside corners, so it seems to be a weak point. The outside corners had tears on the backside where the tab had been folded, and had also seperated the sealant from the gutter on 2 of the corners as well. On most failed corners I've seen, the problem seems to be too much stress on the sealant from the thermal expansion of long runs. Seperation of gutter and sealant (make sure it's clean and dry when you apply!) Or tearing of sealant (screws/rivets in the right place for mechanical support, or maybe add enough sealant that it can stretch. That's a bit of a risk thou.

Nice and clean looks professional..please always wear gloves...

@NewTechMachinery

3 жыл бұрын

Great advice Michael! Yes, always wear protective gloves when performing these types of applications.

What's the name of the saw you are using and the size of the blade?

@NewTechMachinery

3 жыл бұрын

It is a Makita miter saw with a 14" blade

@sockeye18

Жыл бұрын

Makita LS1440. 14" blade

Where do you get that saw?

@NewTechMachinery

2 жыл бұрын

It's a Makita miter saw and only available with our Nasser gutter machine.

What size and type of blade do you use for your miter saw?

@NewTechMachinery

Жыл бұрын

It is a 14" diameter blade and a Makita LS 1440 saw

@Voganes

Жыл бұрын

@@NewTechMachinery thanks its 96 teeth correct?

@NewTechMachinery

Жыл бұрын

@@Voganes Not sure on the number of teeth, but that sounds right.

@Voganes

Жыл бұрын

@@NewTechMachinery thank you very much for your quick response

what size blade is on that myter saw ?

@NewTechMachinery

4 жыл бұрын

It is a 14" saw blade

@bossdog1480

4 жыл бұрын

@@NewTechMachinery In backwards I hope with those big teeth.

@mindinthegutter4097

3 жыл бұрын

@@NewTechMachinery is that just a general construction type saw blade?

@NewTechMachinery

3 жыл бұрын

@@mindinthegutter4097 Yes, this is a general construction type saw blade

What gutter profile is this?

@NewTechMachinery

4 жыл бұрын

That is our Nasser Multiprofile gutter machine producing the 2 Step Fascia profile with 13-1/2" wide coil (343mm).

Hey I do the same what type of machine or saw I should get!!!

@NewTechMachinery

3 жыл бұрын

Our Nasser Machines utilize a 14" Makita miter saw.

What saw is that?!

@NewTechMachinery

3 ай бұрын

That is a Makita miter saw.

Drill & rivet.

I would be onto my next corner before you had even got your flat benders out

@robertsmith-gp6lc

4 жыл бұрын

he is doing a video hes probably faster but who cuts tabs anymore?

@ReverendHogwash

3 жыл бұрын

And your corners will look like garbage!

@brandonbradley3610

3 жыл бұрын

Most suppliers only carry/stock (K) style mightier straps. The profile in the video is not a (K) style.

Step 1 buy premade outside corner lol

Much better to buy the angle connectors.

Silicone? Geocell only.

That's a very quiet saw...

If you ever did that here in Boston you’d get laughed at and tossed off the job site. Use the small version of the remade corners. I have no idea why anyone would use your method

@daCubanaqt

2 жыл бұрын

Wait, did you mean pre-made corner? What is a remade corner? Not being sarcastic, learning about gutters and I’m curious. Those pre-made corners are ugly IMO. Like the seamless look much better!

@Josh-ww5kz

Жыл бұрын

Seamless gutters are a thing you know. Lots of people prefer them and this is how you do it without simply adding a corner box on every outside corner on a home. Plus that makes two seams instead of one when you do it this way.

It was great until you got down to the silicone.

No idea what kind of gutter machine that is

@tomlaird8737

Жыл бұрын

It is a Nasser Multi-Profile Fascia style gutter machine. The machine has been discontinued and is no longer available from New Tech Machinery.

Great explanation, that machine is cheating though...

Looks like too much of a pain in the ass to me... Why not just use strip miters ??

@NewTechMachinery

3 жыл бұрын

There are no strip miters available for the Nasser Profiles, and strip miters are not aesthetically accepted in some areas such as high-end subdivisions.

@rreasons64

3 жыл бұрын

@@NewTechMachinery ..... That is my point... If I'm in a high-end subdivision that requires me to hand make miters then of course I can allow that in the cost... But I am trying to get work done that makes me money each and every day and I don't have time to spend that much time on one person's house so I avoid the high-end homes

Wacht a pilipino doing gutter, it's better than that man....