Bro, you saved me so much time! You are my MVP for this week! Leaving you a commemt/liking and abo your channel is the least I can do! Thx man!!!

@uFixTek

3 жыл бұрын

Glad I could help, and i appreciate all the help i can get :), if there is anything in the future you need help with let me know in any of my video comments. good luck

Hey man first time cleaning my laptop and your video seems very helpful - keep up the good work

@uFixTek

2 жыл бұрын

You are welcome! Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request in the future feel free to ask me.

Me sirvió un montón tu video!! super fácil de hacer y muy bien explicado! aunque perdí un tornillo, juro que le salieron pies y escapo por que no lo encuentro por ningún lado!!

@uFixTek

2 жыл бұрын

muchas gracias por el apoyo y sus comentarios. ojala que encuentren el desaparecido :P si no no pasa nada. siempre se puede adoptar otro.

Video really helped me, thanks mate!

@uFixTek

11 ай бұрын

It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P Should you have any questions or requests in the future, please don't hesitate to ask me.

such a good video, very helpful thank you!

@uFixTek

2 жыл бұрын

You're welcome 😊 Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request feel free to ask my anytime my friend :) sorry that i was away for few days.

I cleaned my old thermal paste then i fully disassembled fans and cleaned them. thanks for the video❤

@uFixTek

3 ай бұрын

It's my pleasure, my friend. 😊 I deeply appreciate your taking the time to provide feedback. If you're inclined to support the channel further, feel free to like and subscribe-or even both! Should you have any questions or requests in the future, please don't hesitate to ask me. 🍻cheers

amigo me sirvió mucho tu video muchas gracias limpie mi ventilador y bajaron 20° las temperaturas ahora cambiare pasta térmica

@uFixTek

3 жыл бұрын

me da mucho gusto amigo :) , que bueno que todo termino con éxito, gracias por su apoyo al canal con SUB, y cualquier dudas que tengas pregúntame en cualquier comentario de mis videos , saludos

great tut mate.. you saved me a lot of time :)

@uFixTek

3 жыл бұрын

My pleasure! Thank you for the feedback and your support by a sub :P

Thanks man So much for help. My temps before : 94c° 2300 - 2400 mhz Temps after max 82c° average 75 - 77 4000 - 4100 mhz Btw I used thermal grizzly Kryonaut

@uFixTek

2 жыл бұрын

You are most welcome, Glad you liked it 😊sweet temps, Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P and yes thermal grizzly Kryonaut is a good choice but a bit expensive if you have any question or request in the future feel free to ask me.

Thanks a bunch, mate!

@uFixTek

2 жыл бұрын

You are welcome! Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request in the future feel free to ask me.

Thanks so much mate!

@uFixTek

Жыл бұрын

You are welcome! Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request in the future feel free to ask me.

Thank you very much It's a very useful vedio

@uFixTek

3 жыл бұрын

Any time! Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any request or questions feel free to ask me.

Good video. Thanks

@uFixTek

2 жыл бұрын

You're welcome 😊 Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request feel free to ask my anytime my friend :)

I apply the thermal paste and made undervolt -145 mv cpu now my Lenovo IdeaPad L340 Gaming is not exceed 80°C. I used Cooler Master MasterGel Maker Nano thermal paste. It is a bit of expensive, but good for this value. Thanks uFixIt for this video.

@uFixTek

3 жыл бұрын

under-volt will make your motherboard last much longer, apart that it brings the temps a bit down. thank you for the feedback and your support :)

@sans6924

2 жыл бұрын

my ideapad only goes 80 mv down

@gulperiuzun892

2 жыл бұрын

Kanka undervolt performans düşürüyor mu

I cleaned my l340 and i see insane improvement it turns on in 13 seconds, maximum temperature that i hited when i was playing games for 4 hours was 74 degrees, thats insane. I used kryonaut thermal grizzly and thermal grizzly minus pad 8 and i undervolted it to - 125Mv using Throttlestop thats hard to believe before repasteing and cleaning it was hitting 93-98 degrees on cpu

@uFixTek

2 жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your service: awesome job, enjoy your games without any worries :)

so helpfull thank you

@uFixTek

6 ай бұрын

It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P Should you have any questions or requests in the future, please don't hesitate to ask me. 🍻cheers

thank you!

@uFixTek

Жыл бұрын

You are welcome! Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request in the future feel free to ask me.

Hola que tal, me ayudaste mucho con este video, logré limpiar mi abanico pero no he podido cambiar la pasta térmica, el problema que tengo es que pareciera que el cable de la batería está atascado o simplemente muy duro, podría hacer el cambio sin desconectar la batería? Muchas gracias por vídeos así

@uFixTek

3 жыл бұрын

hola, muchas gracias por el feedback, mira si puedes hace repaste sin desconectar bacteria solo cuidado que to te vaya tocar el disipador al componentes de la tarjeta. y que no se te vaya caer el desarmador encima de la tarjeta, yo personalmente no quito batería para hacer el mantenimiento. saludos al pendiente, igual intenta de jalar el jack the bateria mas duro :P

thx man

@uFixTek

2 жыл бұрын

You are welcome! Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request in the future feel free to ask me.

Thank you for the breakdown, I am planning to repaste and replace the thermal pads, do you know the compatible thickness for it?

@uFixTek

Жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: i recommend you to use a 0.5 good pads,: amzn.to/3DnL7Bc and you can stack this pad to get to 1mm pads can be stacked.

Very good video ! TY very much ! My laptop def. needed it If u dont mind i have a few questions -What is the best cooling paste ù would recommend ? -Considering i use my PC alot how often should i apply new paste?

@uFixTek

2 жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: the best of all is the : thermal grizzly kryonaut extreme amzn.to/3E7yIzf the replacement should be every 2-3 years depending on usage if 12h a day every 3 years if 24h 1.5years

@janoycresva919

2 жыл бұрын

@@uFixTek thx for the quick response

@uFixTek

2 жыл бұрын

my pleasure

thank you

@uFixTek

3 жыл бұрын

You're welcome, thank you for the support :)

The very useful guide , thank you , but i have a problem with screws on raditor just cant turn them , used a lot of strength and damage them a little bit , maybe you can give me advice or answer?

@uFixTek

3 жыл бұрын

thank you for the feedback and support to the channel by a SUB :P regarding your question: sometimes they are really hard to remove: method one: press down with screw driver on the screw and do a small rotation with extra force. #2. if all intent didnt work make a insertion straight over the screw head and use a flat screw driver to remove, if you want me to make a video showing you how to, i will in a couple of days.

thanks

@uFixTek

3 жыл бұрын

Glad to help! Thank you for the feedback and your support to the channel by a Sub :P if there is any request or questions ask me in any of my videos :)

Me sirve el vídeo justo hoy cambio la pasta térmica y dudaba cuál utilizar me decido por la artic-mx4..... Gracias por el video

@uFixTek

Жыл бұрын

excelente amigo, si el mx-4 es muy bueno en tu caso para esa laptop. si te encuentras en Mexico Q.R le hacemos gratis el servicio, saludos

@felipeescobar9154

Жыл бұрын

@@uFixTek si es el mismo modelo de laptop el que tengo.... Se me soplo la batería y la estoy utilizando sin batería pero ya la pasta térmica está resintiendo los 130 whats del cargador y por sobrecalentamiento se me apaga...... Ya va para 3 años desde que la compré y jamás le e cambiado la pasta de fabrica..... El video me dejó muy claro como hacer el cambio, gracias por compartir tus conocimientos..... Saludos

@uFixTek

Жыл бұрын

oh si cada 12 meses deben de cambiar y mas limpiar los ventiladores y el paso de aire que tiene, es muy importante, el CPU cuando toca 90+c se apaga por seguridad, pero antes se baja su velocidad y luego se apaga. asi que trata de abrir y limpia y cambiar pasta cada 9-12meses si usas mucho. es como tener un coche y hay que cambiar aceite del motor. aparte si usas sin batería es mucho mejor, su cargador no se va sobre calentar ya que no va estar cargando una pila, aparte la tarjeta madre dura mucho mas, con que no va tener que dedicar a cargar batería.

@felipeescobar9154

Жыл бұрын

@@uFixTek es correcto, gracias por la plática y intercambio de conocimiento... Saludos

@uFixTek

Жыл бұрын

saludos

thanks bro

@uFixTek

2 жыл бұрын

You're welcome 😊 Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request feel free to ask my anytime my friend :)

@justswedish

2 жыл бұрын

@@uFixTek :)

How about the thickness of Thermal Pads Sir? I'm planning to replace my thermal pads Sir.

@uFixTek

10 ай бұрын

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, the thermal pads are .5mm pads: amzn.to/3ttZWzP Should you have any further questions or requests in the future, please don't hesitate to ask me.

I've also got a small question, I have recently been to Ecuador, and I myself am from Europe, I brought my laptop with me to play some games and do some school work and stuff. Which meant thzt we had to bring both the laptop and the cable. Since we're from Europe we had to buy one of those adapters to fit the power outlet. Sadly on the way there we lost rhe backpack on which the cables were kept so we had to buy a new one there. of course they didn't have cables that'd fit European outlets so we were forced to buy one with an American outlet. I'm pretty sure the voltage from there is lower than here in Europe right? Anyways, now I'm back in Europe and I've noticed significant fps drops while playing games. The weird thing is that I can play fine at a stable fps for quite some time and after a while is starts with the fps drops and thye're really really annoying. Wait a minute or something and they're gone, only to return a few minutes later. I'm using the cable with SA outlet plugged into an adapter that converts it to a EU outlet. It does not change the voltage tho, so I was wondering if my performance issues would be caused by a too low voltage?

Really great video. I have my laptop for 1 year now, it's dropping frames in every game and fan if not rotating as it used to, should I clean it the way you showed in the video? or is it something else?

@uFixTek

3 жыл бұрын

Thanks for sharing, thank you for the feedback and your support to the channel by a SUB :P regarding your question: yes do the exact steps that i did in this video and your laptop will appreciate the effort and you will see a big difference, use one of this paste: for the best of the best: amzn.to/3b5byMT 2nd best: amzn.to/2N7CTpJ good luck my friend :)

@agamvfx3880

3 жыл бұрын

@@vrushabhpashilkar7317 bro i had the same problem , i just cleaned the fans from inside . problem solved

@agamvfx3880

3 жыл бұрын

@@vrushabhpashilkar7317 only solution to this is regular maintanence i guess

@werjshavs3278

2 жыл бұрын

@@uFixTek bruh i waped of the glizzy i though Tf now i know why my PC didnt work there was some glue lol

@electrohacker1324

2 жыл бұрын

@@agamvfx3880 bro how remove the dust completely from fans

Hi! Im planning to use kryonaut thermal grizzly, is there a big difference if I apply it like you did and spreading the paste? Sorry just a bit anxious because my CPU Temp reaches 94*C tops (btw im using same laptop l340 ideapad intel i5-9300-H GeForce 1650

@uFixTek

3 жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: i would highly recommend you use the kryonaut thermal grizzly: amzn.to/3eQ8uH6 and about the spreading the paste , PLZ dont spread the paste, we have tried and the results are much much better the way i indicate in the video.

Hey there Is this screwdriver model: Stanley Ph0×150mm. enough for removing the screws in the inside? Or shud I go for ph0×100mm?

@uFixTek

Жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: go with Ph0×150mm grab this it has all the bids you need and very cheap: amzn.to/3fI8cFT

Muchas gracias señor le mando mis bendiciones desde argentina, mi l340 tiene thermal trothing con esto calculo que se va a solucionar ya pedi la pasta grizzly, entocnes recomendaste esa entre las 3? La mx4 yo la use antes pero mucho no me convence

@Masterpeing

2 жыл бұрын

La tapa no cierra toda se ve que el flex esta ve vencido, pero no se.como arreglarlo podrías hacerme un video?

@uFixTek

2 жыл бұрын

si gusta mándame una foto de que tapa estas hablando amigo. usa este pagina para mandar fotos. prnt.sc/

I'd be great if you would post your thermals before and after. To see if kryonaut would help with throttling.

@uFixTek

3 жыл бұрын

i usually dont like putting that info because unless i do a live test, then that would be a hard prove , else any chart could be a fake number, i could easily tell you with Kryonaut you will get the best temps possible before liquid metal, and your results will always be different than anyone else because of many factors : room temp type of testing and airflow, and how well you repasted, note: when playing lift the back end of the laptop about 1-3cm and you will see a huge temp drop. i will take your advise and try to implement the chat in my future videos. Thank you for the feedback and your support to the channel, if there is anything else i could help you in the future ask me in any of my video comments. good luck :P

@Sevent77

3 жыл бұрын

@@uFixTek All true and fair enough, if the laptop is old and you're cleaning it may as well put on new better paste. What I'm interested is it worth just to replace the paste, yes kryonaut will be better than anything the manufacturer put on but will there be a substantial difference? As you said there are many other factors to take into account when it comes to cooling laptops, so in general the difference would be 1-2 degrees then it's not worth it, but if you would tell me that it could be up to 10 degrees difference then I would replace the paste immediately.

@uFixTek

3 жыл бұрын

oh my friend you in for a surprise... If you replace the manufacture paste to a kryonaut paste, you will definitely see a big difference about 10-20 in some cases even more. but again, what you are going to realize is that when you repaste, your fan noise will drop a lot, unlike with manufacture paste the fan that is working twice as hard to keep the temps down. so keep the factor in mind, that the fan is working less with new paste. e.g manufacture: temp reaches ABOVE 80c, the fan will go to max speed at 100%, trying to bring to 80c or under. e.g. new paste: temp reaches 79c, but under 80c but the fan running at

@Sevent77

3 жыл бұрын

@@uFixTek Thanks for the informative response, the fan noise noise ain't that big of a deal for me but throttling is, during load my GPU gets to 75c Max (90c in a specific stress test) But my CPU even with undervolting anywhere between 80-95c so it throttles hard. So definitely gonna repaste with some kryonaut. :)

@uFixTek

3 жыл бұрын

oh daymn i would really really recommend you repaste and place a copper shim on both 20mm x 20mm x.4mm -.5mm amzn.to/3pfYjOW you will see major major difference, and before asking about the pads on vrams , you really dont need the pads for the vrams they are there for those that do vram overclock. there reason for the copper shim is to create more pressure on the gpu and cpu, and the result will be 60%better, comparing to simple repaste. the reason is: law of the physics: in order for two parts have better heat or cold transfer its pressure, and with this crappy x clamps that they use in purpose they remove the pressure on the heatsink and by placing the copper shim you will create a great pressure and you will see a dramatic temp drop. i have made few videos with copper shim with liquid metal but dont place LM just place paste instead of LM. you should never hit over 90c under load or tests. again if you dont want to get the copper shim, just do a simple repaste. but it would be awesome if you did place a copper shim on top.

brother, can you change the gpu of that specific laptop in case it is broken or is it already soldered on the motherboard?

@uFixTek

Жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: no my friend the GPU is soldered on board, you can't replace it. BUT a good technician with proper machine (reballing) can replace the BGA CHIP (GPU) its not something you can do at home, we do this in out stores.

Do you suggest investing a thermal pad on m.2 SSD?

@uFixTek

Жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: its absolutely not required, it will not help for its performance or anything, the only thing it may help to give it a few days of extra life. but far before it dies because of heating it will die because of usage TBW (Terabytes Written)

Thanks for your help. there is a mechanical noise coming from the CPU. What do you think could be the reason? I tightened all the screws thoroughly.

@uFixTek

3 ай бұрын

It's my pleasure, my friend. 😊 I deeply appreciate your taking the time to provide feedback. If you're inclined to support the channel further, feel free to like and subscribe-or even both! Regarding your question, the sound that you hear is coming from hard drive HDD, and that means the drive is failing, back up your file on the drive and replace the hdd with ssd. kzread.info/dash/bejne/iZth2JamhczHiZM.html Should you have any further questions or requests in the future, please don't hesitate to ask me. cheers🍻

@ortakata62

3 ай бұрын

@@uFixTek Thanks for your answer, but I am using m2 ssd and samsung 1 tb ssd. So I don't use any hard drive. And I'm sure the source of the sound is from the CPU. but strangely it doesn't come from the middle. I thought it was coming from the RAM, but it was coming from the bottom of the CPU. Any ideas why the CPU is making a mechanical noise?

@uFixTek

3 ай бұрын

the only sound that can be making if you don't have HDd, then and you use it is not the fan, then the condensers (components) coils, high-pitched sounds coming from the motherboard are from electrical components in the system experiencing a strong charge or malfunctioning. you may have a bad inductors on board, you will need to get a technician to check and replace them else it will result on motherboard failure.

@ortakata62

3 ай бұрын

@@uFixTek thank you for giving a time. I will contact a technical service as soon as possible 👍

@uFixTek

3 ай бұрын

It's my pleasure my friend. good luck

I'm not planning to remove the thermal paste just yet but I did notice that the fans have begun rattling just a teeny tiny bit but it makes me antsy. So I want to make sure to clean em out properly so that that hopefully fixes the issue.

@uFixTek

3 жыл бұрын

sure you can go a head and clean the fans and the heatsink, but it would be a very good idea to replace the thermal paste. and i appreciate your support to the channel :)

@wu1ming9shi

3 жыл бұрын

@@uFixTek The laptop is barely a year old so I don't think there is a real need ofr that yet. I also don't run programs that heavy very often and I have undervolted it to boot so unless it's very hot in the room it barely goes above 80°C. Which is fine by me. Also is the battery plug always where it is in your video or do I need to look around a bit for that? I don't know what screen size the laptop is you showed but mine is a 17 inch chonker. So I don't know if all the parts are in the same place yet. They should share the same fan models though I think.

@uFixTek

3 жыл бұрын

the battery plugs are 90% the same and the only thing it maybe moved few centimeter to left or right but the removal its the same. if the laptop its been used for a year and no heavy loads daily then wait for next year. i normally replace the paste every two years for heavy users. good luck

@wu1ming9shi

3 жыл бұрын

@@uFixTek Thanks, I have been using this laptop almost constantly though but I haven't noticed any real drop in performance so I should still be fine. Once again thank you for making a video about this model and answering questions. I'm usually very late to issues like these or questions never get answered. It's a nice change for once lol.

@uFixTek

3 жыл бұрын

anytime my friend i always try to stay on top of the comments, just when you got questions make a new comments as its easy for me to identify and not scroll down the list :P and if you dont see a big temp difference then you fine. as long as you dont hit 90c you fine

Do you need to remove the heat sink to remove the fan or can I just remove the fan by itself

@uFixTek

2 жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: you can remove the fan without removing the heatsink just remove the screws that touches the fan.

dude, i've been using the computer for gaming for a long time. Which thermal paste would you recommend to buy and what brand of alcohol should I clean the top of the processor with? Because I live in Turkey, unfortunately, I can't order from Amazon because of the exchange rate difference. I'll buy it from local shopping sites.

@uFixTek

2 жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P sorry that i was away for few days, regarding your question: i used to live in turkey i speak farsiand turkish azari :P. i would recommend you try to find the following items: thermal paste: arctic mx-4 or artic silver 5 or thermal grizzly kryonaut, Noctua NT-H1 and regarding the alcohol use: isopropyl alcohol 70%+

@onurcukur2986

2 жыл бұрын

@@uFixTek thank you bro🤜🤛

Hola, sabes qué espesor debe tener el thermal pad? 1mm o 0,5mm ?

@uFixTek

7 ай бұрын

claro son 1mm, te recomiendo comprar de .5mm los pads se pueden encimar.

hi, great video! this pad are 1.5mm?

@vitorcosta7686

3 жыл бұрын

tnks.. 5mm or 0.5mm? in another comment I saw that you recommended a 1.5mm. now I got confused.

@uFixTek

3 жыл бұрын

@@vitorcosta7686 sorry my friend i was rushing in to answers , give me till tomorrow i get to the store and i will measure exact number, and post you with correct results.

Hola que tal disculpa sabes a cuantos Mhz puedo ponerle la ram a la lap?, me refiero a cuanto aguanta la mother de mhz gracias :)

@uFixTek

3 жыл бұрын

2400 amigo si pones mas the bios automatically lo baja. saludos

Hola, disculpa, el puerto de la memoria de almacenamiento M.2. de la laptop es NVME o SATA?

@uFixTek

3 жыл бұрын

gracias por su apoyo al canal, sobre tu pregunta el puerto de m.2 es PCI-E lo cual es NVME compatible y también compatible to m.2 sata. amzn.to/3lMk3DE

This laptop is the same one as the one with the gtx 1650 graphics card right?

@uFixTek

3 жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P Regarding your question: yes this is the one with 1650 GTX

Sabes de algún otro kit que pueda comprar? No tengo tanto dinero como para poder pillarme el kit y tenía pensado comprar la pasta,el aire comprimido y el alcohol isopropílico también.

@uFixTek

2 жыл бұрын

gracias por el apoyo al canal y su comentarios, sobre su preguntas: claro hay otro mas económicos: kit: amzn.to/3H8f1t7 paste: amzn.to/3u4APSB duster: amzn.to/3rTmTIA Mexico: amzn.to/3HbKryO amzn.to/3ILRazU amzn.to/3IHQ4oK

@ZzzyoutubezZZ44

2 жыл бұрын

@@uFixTek muchas gracias por la ayuda

I can't seem to remove the screws in the heatsink or the thing above the cpu and gpu. Is there a solution to this? No matter how hard I unscrew it, it won't bulge or move at all

@uFixTek

2 жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: i will make a video on how to remove the screw in that situation this weekend.

I pasted mine 6 month ago but i think i put too much cuz whole gpu and cpu was covered in thermal paste is it ok? Or should i repaste it?

@uFixTek

10 ай бұрын

Thank you for your feedback! Regarding your question, no it's totally fine if the paste is over the crystal and over the capacitors around the crystal its totally fine. just next time apply a bit less, but this over lapping has no effect in performance nor temps. Should you have any further questions or requests in the future, please don't hesitate to ask me.

how many mm thermal pads ? should we replace it ?

@uFixTek

10 ай бұрын

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, i highly recommend you to not touch the pads and not replace them they are fine, but if you want get a good quality 1mm pads and replace them: amzn.to/3PL9G1k Should you have any further questions or requests in the future, please don't hesitate to ask me.

Hi, I have one more question.. Does the ssd connector match to all the l340 models?

@uFixTek

5 ай бұрын

regarding your question: yes it is the same connector.

@rafawieruszynski7156

5 ай бұрын

@@uFixTek cheers!

@uFixTek

5 ай бұрын

🍻

May I know the exact thickness of the thermal pads so I can order a pads and paste as well? Thank you 😁

@uFixTek

3 жыл бұрын

Thank you for the feedback and your support to the channel by a SUB:P regarding your question: here is the pads for the laptop: the best pads: amzn.to/2QL6wPj 2nd best: amzn.to/3rveOHu BUT i would recommend you to not replace the pads, NO need at all to replace them , you wont notice any difference in performance or anything, the thermal pads for the vram are totally not required UNLESS you are going to OC the vrams. if you are not over clocking VRAMS no need!

@allanvillanueva6872

3 жыл бұрын

@@uFixTek thanks for the tip! That helps a lot

@uFixTek

3 жыл бұрын

your welcome my friend and good luck

Hello, I have questions should I change thermal paste if this laptop have droped 3 times but still working(how it's like if you have siblings) still performance is good laptop age 3 years. So question is will plastic screew up back (some parts of plastic are cracked) if I disassemble it and I change the theramal paste or I need wait when laptop will dead (sorry for my English)

@uFixTek

Ай бұрын

please explain what you need and want to do in your native language my friend. cheers🍻

@SubaruGuy1

Ай бұрын

@@uFixTek Did you get a reply to your comment because it doesn't appear for me? Sorry if I spammed

Hello i have same laptop that you used in video but i have little problem when i turn off the keyboard lights it’s not turning off the power button do you have any thoughts?

@baukestienstra5623

3 жыл бұрын

Thats normal :)

@uFixTek

3 жыл бұрын

yep its normal, nothing wrong with it.

I had mine for 2 and half years I did a repaste with an MX-4 however I discovered lately that it wasn't authentic and my CPU stopped stopped boosting in games until I did an undervolt which fixed the problem Could this be because of the fake thermal paste??

@uFixTek

2 жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: SURE it is, there are many fakes out there with paid feedback, make sure you get an original authentic brand.

Can I just remove the cooler? I don't want change paste, just clean the coolers

@uFixTek

3 жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: NO if you remove your cooler then you MUST replace the thermal paste. else you will over heat the CPU and GPU

ey. did it got better temp after that repaste?

@uFixTek

3 жыл бұрын

we do this daily, you will defiantly get better temp result compare to the factory paste that you have. i dont like to give numbers out as the numbers for every individual could be different.

Hello there! How come nit replacing the pads? Its not necessary at all even after 5 years in my case?

@uFixTek

6 ай бұрын

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, the thermal pads on this models can last up to 12 years, if your pads are damaged then change them but if they look fine no need to change them. Should you have any further questions or requests in the future, please don't hesitate to ask me. cheers🍻

@rafawieruszynski7156

6 ай бұрын

@@uFixTek Thanks for the tip. 1 more thing. What speed of ram can I max use in this laptop?

@uFixTek

6 ай бұрын

doesn't matter what speed you give the CPU and motherboard will auto adjust the speed to the max speed that is possible, remember that in laptop the more ram sticks you place the mother will lower the speed of the ram automatically and there is no option to manually increase it. for you i recommend you to get 16GB DDR4 2666MHz stick amzn.to/41TSV8K also you may want to watch the video on that: kzread.info/dash/bejne/jJ94mqltfsTQmJM.html and if you want to know the max ram capacity check this: kzread.info/dash/bejne/pn95rLakhtfOZLQ.html This is an Amazon affiliate link. When you use my links, you are helping to support the channel. 🙏

@rafawieruszynski7156

6 ай бұрын

@@uFixTek Thank you very much, sir!

@uFixTek

6 ай бұрын

It's my pleasure my friend.

Hi boss i want to ask if that laptop is new? meaning from the box ? or used?

@uFixTek

3 жыл бұрын

hi, its new from box i opened the sealed box when the client purchased it. Thank you for the feedback and support to the channel :)

@jayson9363

3 жыл бұрын

@@uFixTek i just bought i the same thing yesterday and wondering why did you repaste if this is new?

@uFixTek

3 жыл бұрын

because the factory paste are the worst paste, if you repaste now, your laptop will last longer as it wont run at higher temps. we always recommend and i personally do it to my equipment, Thank you for the support and feedback.

After this work how many degrees get on stress test for this model? I ordered Cooler Master MasterGel Maker Nano with 11 w/m k value. I will apply my Lenovo L340 with this method. I hope I will get rid of from the 97-100 degrees

@yusufkenanturak2357

3 жыл бұрын

My device also shutdown some times

@uFixTek

3 жыл бұрын

wooo you need a re paste your device will have dramatic drop in temps. as you can see the other comment the guy says it helped him to drop the temps y 20c , you will see a big difference. the reason for shutdown is because of intel over heating protection, it shutdown to prevent over heating/ damage to cpu. thank you for the feedback and your support to the channel.

@yusufkenanturak2357

3 жыл бұрын

Thank u friend for all of this detailed comment. Have a nice day, i will write the result after repaste with cooler master

@uFixTek

3 жыл бұрын

Thank you , and hope to hear back from you with your results :) good luck

Helloo should I just apply the thermal paste like you did? Do I not have to to spread the thermal paste?

@uFixTek

Жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: no need to spread my friend just place in the middle and you be 1000% fine.

@aanda8729

Жыл бұрын

@@uFixTek ohh thank you......also is gelid gc extreme a good thermal paste?

@uFixTek

Жыл бұрын

its my pleasure , and yes its a very good paste.

@aanda8729

Жыл бұрын

@@uFixTek is there any alternative to microfiber cloth that I can use?

@uFixTek

Жыл бұрын

use a kitchen paper towel. or a food napkin

My laptop all of the sudden have some keys that stops working randomly. They start working again and then it keeps happening. I tried all the software solutions and still happening. Do I have to change the keyboard?

@uFixTek

3 жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: your keyboard membrane is going back, unfortunately you will have to end up replacing the keyboard. replacing this mesh keyboard its not a easy nor hard task just time consuming :P here is a video of how to replace a mesh keyboard. www.ebay.com/itm/333176442734?hash=item4d92dd0f6e:g:0YwAAOSw3WxaTLks kzread.info/dash/bejne/qqebj7ynaJPOirQ.html kzread.info/dash/bejne/n2eu17B7cbatc7w.html kzread.info/dash/bejne/ZaemubmbqKzNiKw.html OR you can replace the Palmrest completely but that would cost a bit more, but less work :P amzn.to/3dCl4t7

A quick question can you remove the keys one by one on the keyboard?

@uFixTek

3 жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: YES and NOT recommended you will have 80% chance of breaking the hinges under the keys, it requires lots of skills. i been doing it for 18years and still not perfect.

@Gravyd420

3 жыл бұрын

My brother spilled soda on my laptop so some of my keys are sticky.

@uFixTek

3 жыл бұрын

use a isopropyl alcohol with a pray and spray a fair amount on the keys and let the isopropyl alcohol get under and keep tapping the keys till it washed the soda, the isopropyl alcohol will destroy the soda :P make sure the laptop is off when you doing this and let the laptop dry dont worry the isopropyl alcohol is not conductive.

hello sir i am from india and I own th esame laptop that is lenovo l340 thermal pads on heatsink ,of my laptop are corroded like they are in powdered form on some parts please suggest me what should i do and reccomend me the thermal pads of perfect thickkness that are available in india on amazon . please reccommend .

@uFixTek

2 жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: get any 12kw and .2mm : is.gd/CmGARM

@devsati4311

2 жыл бұрын

@@uFixTek Sir this link is not opening please provide another.one please

@uFixTek

2 жыл бұрын

@@devsati4311 www.amazon.in/MAXBELL-Silicone-Thermal-Resistance-Heatsink/dp/B09GPN2F13

How much time does the service center is gonna take for this?

@uFixTek

2 жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: we charge 45.00USD for the service

Hola no puedo sacar los tornillos donde esta la gpu no puedo esta como pegado alguna solución?

@uFixTek

3 жыл бұрын

cual tornillos amigo mandame un foto ask@ufixtek.com

Does the thermal paste for desktop and laptop are the same?

@uFixTek

3 жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: Yes the thermal pastes are all the same for desktop use and laptop use. the best paste: thermal grizzly kryonaut: amzn.to/2UQih9n 2nd best: amzn.to/3zAQk46

@johnsorey5472

3 жыл бұрын

Thank you so much brother

@uFixTek

3 жыл бұрын

anytime my friend and you can support the channel by using my amazon links before purchasing anything :P amzn.to/3iOVi6C much appreciated

How much do i have to tight the heat sink screws i think i tight them too much and laptop is still heating even after thermal repaste Do we have to tight screw slightly or tightly plz reply

@uFixTek

Жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: the screws must be tighten all the way not excess force just tight till end. if you have a bad temps can you tell me what is at max load?, and what brand thermal paste you using?

@SamGaming0901

Жыл бұрын

@@uFixTek using thermal gryzlly and load is around 80-90% with undervolting

@uFixTek

Жыл бұрын

you may have a unbalanced heat-sink, it's very common, we do get clients coming in and have the same issue, we order hew heatsink or use a copper shim .3mm amzn.to/3SnpoyI and what you want to do is to place paste on GPU and CPU and paste both side of the copper shim. it will help you dramatically.

@SamGaming0901

Жыл бұрын

@@uFixTek i see thanks for replying 💯

@uFixTek

Жыл бұрын

its my pleasure. if you have any question or request in the future feel free to ask me.

I’m using the exact same screwdriver and the screws on the heat sink will not unscrew

@uFixTek

Жыл бұрын

Press hard down on the screw and slow rotation, they do sometimes come very hard. the key is press down hard on them.

@cannedfruitcup

Жыл бұрын

@@uFixTekthe ones closest to the ram i can only get to move to the left but not right

@uFixTek

Жыл бұрын

is the screw heads bad , the screwdriver is not gripping ?

@Jademulic

6 ай бұрын

​@@uFixTekscrewdriver is not gripping for me

If I do this with my laptop will it make my game frames per second higher?

@uFixTek

2 жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: it will for sure help speed up games and loading and resulting into better fps.

@ggsmrdoink

2 жыл бұрын

@@uFixTek OK thank you

@uFixTek

2 жыл бұрын

my pleasure my friend

thank you sir put some mx-6 and I am not thermal throttling in game anymore (:

@ZeNpg

6 ай бұрын

idle: 14c on all cores, 24 on gpu Load: under 75 no thermal throttling (:

@uFixTek

6 ай бұрын

It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P awesome job my friend👍🫠 Should you have any questions or requests in the future, please don't hesitate to ask me. 🍻cheers

@ZeNpg

6 ай бұрын

quick question... so I used mx-6 and my thermal throttling went away but now I am receiving power limit throttling... should I be concerned @@uFixTek

@uFixTek

6 ай бұрын

Don't worry about the power limit, that is nothing to worry about. if the temps are low and is doing what you asking it, then you good to go.

is there any chance for this laptop to upgrade the cpu ?

@uFixTek

2 жыл бұрын

Thanks ✌ for the feedback! if you wish to support the channel you can LIKE or SUB or both :P Regarding your question: im sorry to inform you but your laptop can't be upgraded the CPU is soldered on motherboard :( and the power regulators and many other components are made for the cpu that you have :( sorryy

@awesome4317

10 ай бұрын

How do you wanna upgrade the cpu?

HI is Arctic MX 4 4g sufficient for L340 for one time use??

@uFixTek

19 күн бұрын

🫠Regarding your question, yes it is enough for few service jobs. Should you have any further questions or requests in the future, please don't hesitate to ask me. cheers🍻

@nipunshakya946

19 күн бұрын

​@@uFixTek no for one time use only as my motherboard just changed and I'm looking for a new thermal paste so this will be sufficient or should I go for 2g. Thanks for replying to previous question appreciated 😀 👍

@uFixTek

18 күн бұрын

2g will do it then 🫠

@nipunshakya946

18 күн бұрын

​@@uFixTekthank you so much

@uFixTek

16 күн бұрын

It's my pleasure my friend.

Hello I have been an owner for this laptop about 6 months. In the beginning I did not have any issues with thi,s computer but nowadays, on playing valorant gpu reaches temperatures around 86 degrees celcius and the FPS goes down to 30-40s from 200- 230s. What is the problem, could someone tell me?

@perspectives2202

3 жыл бұрын

I did not have something before the my charger broke down and the service sent me a new laptop charger. After that, I am having this issue.

@uFixTek

3 жыл бұрын

Thank you for the feedback and your support to the channel by a SUB :P regarding your question: sometimes the new chargers give a fraction of extra voltage (.4 -.6 volt) extra and that can cause the components failure and over heating. this issue was happening with HP service center chargers and they had to do a recall and now its happening on lenovo and dell few cases.

Idk why but some of the screws on the gpu and cpu wouldnt turn, i need help

@uFixTek

3 жыл бұрын

its normal open up screen 90 degree and place the keyboard face down on the edge of the table with screen hangin down on the side this way now you can press down hard on the screw driver and at the same time rotate wile pressing hard on the screw. Thank you for your feedback and your support to the channel :P

@mayumi1603

3 жыл бұрын

I'm having the same problem

Hey pro .. My laptop ideapad l340 i7 the button ( w ) don't working but when i connect other keyboard he working what should i do can i fix this buttom only or change the keyboard .. Can u advice me because in this case i fell like panic attack 😭 .. I from egypt

@uFixTek

3 жыл бұрын

Thank you for the support to the channel by a SUB :P regarding your question: the keyboard button cannot be fixed, no one can fix it. you will have to replace the entire keyboard: tinyurl.com/j8bf2n4f search on aliexpress or ebay for this: lenovo ideapad l340 keyboard and make sure you get the right keyboard pay attention to the enter KEY some come with L shape enter key and some straight the rest doesn't matter here is two example of the enter keys: prnt.sc/10qovyt prnt.sc/10qovpj

@muhamed-mustafaelsemari4577

3 жыл бұрын

@@uFixTekand is there a different between original and copy are effect in the laptop or not ? Im worrying about it ..

@uFixTek

3 жыл бұрын

no its all the same, there is no difference in original or clone version both use a plastic membrane.

@muhamed-mustafaelsemari4577

3 жыл бұрын

Hi can u make a video how to replacement a keyboard because i want to change it by myself because i don't trust in the maintenance center ..

@uFixTek

3 жыл бұрын

@@muhamed-mustafaelsemari4577 here a keyboard replacement that i just uploaded that can be a use as reference its almost the same concept , i know you can follow and do the same.its pure logic. kzread.info/dash/bejne/qqebj7ynaJPOirQ.html

I did exactly this, but I am getting a bit worse temperatures than before. Could it be that I applied the paste somehow bad? Is it possible that I maybe pressed it a little too hard on the new paste and it went away from the centre? Should I reapply it?

@uFixTek

3 жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: please answer the following questions correctly and exactly: #1. what brand and model of the paste you using? #2. did you touch or remove or changed the pads around the GPU/CPU? #3. did you place a fair amount of the paste in the center? #4. did you cross screw the heat sink clamps. in a X way?

@tomasgaming703

3 жыл бұрын

@@uFixTek I used the Arctic MX-4. I did nothing with the pads except cleaned them with a little bit alcohol from the old paste. I think I applied enough of the paste, and I screwed it in X way. That's why it feels strange to me.

@uFixTek

3 жыл бұрын

ok then you may need to use a thick paste like artic silver 5 that is great for a uneven heatsink, this happens often we get this situations in the store, that sometime the paste that we use normally mx4 dont respond well because its not thick. so we use artic silver 5 that is thicker and can stand better the unbalanced plates. because the factory paste is also thicker for the same reason. if you can get your hands get artic silver 5 is the only good paste that is thick, dont get : thermal grizzly kryonaut or anything else they are awesome but they are like mx4 very thin. amzn.to/3yIRtXb or get the 13grams for futures repaste: amzn.to/3qYr0Cb - note if you still have left over mx4 do a repaste again to confirm the situation.

@yostinpoveda2083

3 жыл бұрын

@@uFixTek shit. I got thermal grizzly and i am now worried lol. I haven't installed it though

@uFixTek

3 жыл бұрын

@@yostinpoveda2083 we use thermal grizzly , his case is 1 in 500 maybe or even higher. just two days ago we did a service with thermal G, and it was beautiful results. try it out.

did you just say 1060, 1070 GPU? I'm shocked. btw, have mine for a year now, still great as it should be. Great for gaming and productivity.

@uFixTek

3 жыл бұрын

they are great laptop and i have seen a 1050 and 1060 not to sure about 1070 :P if you had it for a year check temps and it would be a nice to do a repaste, its like having a car and saying still runs fine, and not change the oil :P

@allenocampo6174

3 жыл бұрын

​@@uFixTekuFixTek Alright man. I will. Thank you so much for the advice! Much appreciated.

@uFixTek

3 жыл бұрын

@@allenocampo6174 your welcome and if you ever need anything regarding laptops feel free to ask :)

Do I need to unplug battery?? I am having difficulty getting it out

@uFixTek

Жыл бұрын

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, YES it is very important that you do it, we do do service without unplugging , if you going to not unplug make sure you don't drop any screw on board.

@cannedfruitcup

Жыл бұрын

@@uFixTek alright I’m not sure how to pull it out I am pulling from the middle gently but it does not want to come out

@uFixTek

Жыл бұрын

if you remove 4 black screws that hold the battery then lift the battery and slide it to front of the lap and pull the cable it will be much easy.

@cannedfruitcup

Жыл бұрын

@@uFixTek i will try that thanks

@cannedfruitcup

Жыл бұрын

@@uFixTek additionally my artic mx 6 thermal paste came with cleaners are they any good?

Hyy it's me again... As I checked with some games, using MSI Afterburner... For Mafia 2 Classic the GPU temps are around at 60C-65C while I LIMIT says NO LOAD But when I play Resident Evil 3 Remake GPU temps are increasing gradually while LIMIT says VOLTAGE LIMIT So is it the problem with battery and charger?

@uFixTek

3 жыл бұрын

Thank you for the feedback and your support to the channel by a sub :P regarding your question: we do get this issue in the store often and the results: 1. 80% charger failing to deliver the right amount of amper. 2. a voltage regulator on the motherboard of not woring properly 3. batter has nothing to do with this, you should never never do a full load on battery alone , as you can damage many power regulator components, that can result in the above issue.

@nj_mods

3 жыл бұрын

@@uFixTek sorry I didn't catch that much could u please elaborate more?

@yostinpoveda2083

3 жыл бұрын

@@nj_mods Lenvo L340 gaming has a power limit of 35w (TDP) due to its poor thermals in theory. I will try reapplying thermal paste and changing the TdP from 35 to 45

@nj_mods

3 жыл бұрын

@@yostinpoveda2083 I have put my power limit to 30w and still temps are high and reaches upto 85C max...

@yostinpoveda2083

3 жыл бұрын

@@nj_mods Have you re-pasted the CPU and GPU yet? My temperatures are under 75's on apex legends and another air plane demanding game. There is a new BIOS update in Lenovo service bridge for Lenovo L340 gaming laptops. I updated that BIOS, also put my pergormance power plan in the minimum to 100% and maximum to 90%. Please note I have a cooling pad and place my laptop lifted a few centimeters from the desk when gaming. Make sure you have no windows updates pending. Try eliminating start up apps by going to task manager and check disable start up apps. You can also disable background apps by going to background apps in windows. In short start up and background apps are energy killers and i believe they also eat some power from the CPU *besides* our games. Thus, running a game + start up + background apps may make the computer hotter but that is my theory. I have done all of the above + will take my laptop to take off the manufacturing thermal paste for a new repaste. Eventhough my laptop is just 1month old, i don't trust the application of pre-applied thermal paste.

¿Entonces no puedo expandir la capacidad de la memoria ram?

@uFixTek

3 жыл бұрын

hola amigo gracias por su apoyo y comentarios, sobre tu pregunta este video es sobre servicio no aumento de ram, si gusta checa mi otro video donde muestro como cambiar o aumentar ram, kzread.info/dash/bejne/jJ94mqltfsTQmJM.html NOTA: si quiere comprar: amazon USA: 16gb Ram: amzn.to/3iOfA0d amazon MXN: 16gb RAM: amzn.to/3eZmb6Q

@Jedexpff

3 жыл бұрын

@@uFixTek gracias por responder, los 2 videos me han sido utiles! ^^

@uFixTek

3 жыл бұрын

me da gusto , cualquier cosa aquí estoy para apoyar, saludos

Heyy, nice video Btw I have a problem... I have Lenovo IdeaPad L340 Gaming With specs: Intel i5-9300HF 2.40ghz turbo to 4.1ghz NVidia GeForce GTX 1050 3gb 8gb Ram Its only 2 months old. The issue is whenever I play games like Mad Max and Rise of the Tomb Raider the cpu speed goes down to 0.79ghz after playing for a while. Do u have any fix or suggestions for that cuz it's happening everytime and it also makes games unplayable.

@uFixTek

3 жыл бұрын

Thank you for the feedback and your support to the channel by a sub :P Regarding your question: #1. before you game make sure your battery is fully charged, and connected A/C #2. never play game on battery only, #3. if its two months old its not because of over heating. its because of a power regulator on a motherboard is going bad. do this and report back: power off the laptop: plug the charger and let it sit for 3h, then power on with charger plugged in and check the cpu speed , and when gaming (if you feel that its slowing down) double check to see if the battery is charging and its at full. if you minimized and see the battery at 80 or so that means the charger got disconnected sometime mid gaming (because of charger failure) and the cpu lowered speed. you may simply have to replace the charger.

@nj_mods

3 жыл бұрын

@@uFixTek I have turned on Conservative Mode on Lenovo Vantage which does not let battery exceed 60%, which increase battery life... So does that affect to the CPU temps?

@nj_mods

3 жыл бұрын

@@uFixTek unfortunately it happened again, as of before it was fine during noon I turned off and removed power cable then after almost 2h I started my laptop back on and still kept it unplugged as of I was watching some YT then I plugged in and then started mad max and after playing like 30mins cpu went to 0.79ghz. It wasn't the case in the morning as I was using it from like 9am to 2pm continuosly and never had any issues... Also I was playing mad max in morning like 2h without any issues

@nj_mods

3 жыл бұрын

@@uFixTek I did a stress test using Intel XTU and it was power limit throttling and thermal throttling...

@klaus9687

3 жыл бұрын

@@nj_mods same problem so whats the solution?

Please help me immediately, i can't open copper pipe's screw's, which screwdriver is compatiple with this one. Because i can't open it it is stucked, i opened gpu's 2 screws but processor's 3 screws can't open. I think it stuck from temperature. Please help me i need my laptop immediately. Which number of screwdriver compatible with cooper pipe screws?

@yusufkenanturak2357

3 жыл бұрын

Ok I listened carefully PH0 is compatible but i need open method it is stuck

@uFixTek

3 жыл бұрын

My friend its SCREW Philips 0 , and you need to press hard on the screw and rotate, press down hard and rotate. in case you messed up the screw head then you have to make a straight cut on top of the screw heat to be able to use screw driver. Thank you for the support and if there is anything i can help let me know.

@yusufkenanturak2357

3 жыл бұрын

Thank you, I solved the problem with another so thick flat type (idk number it is in the set) screwdriver. After that I apply the thermal paste and made undervolt now my Lenovo IdeaPad L340 is not exceed 80°C. I used Cooler Master MasterGel Maker Nano thermal paste. It is a bit of expensive, but good for this value. Thanks uFixIt for this video.

@uFixTek

3 жыл бұрын

im glad that you got it fixed my friend if there is anything else let me know good luck. :)

@yusufkenanturak2357

3 жыл бұрын

@@uFixTek I have a one question too, can I change this messed up screws? Or I need a new heatsink, heatsink is so expensive i checked from internet. These screw also has C-Lock as you said. If I can change it also if you have you got any this numbered screws, I will buy from you. Because I need 2 screws from these one or set. If you have and you can sell me I will buy from you with ebay, bitcoin, or any your selection payment method.

My bottom air vent is broken so should I use or replace it?

@uFixTek

3 жыл бұрын

Thank you for the feedback and your support by a sub :P regarding your question: can you send me a picture of the vent broken?>

@klaus9687

3 жыл бұрын

@@uFixTek how?

@uFixTek

3 жыл бұрын

@@klaus9687 take a picture of the broken vent and use this website , and post the link here prnt.sc/

@klaus9687

3 жыл бұрын

@@uFixTek did u see it?

@uFixTek

3 жыл бұрын

you have to upload to that website and post me here the link, in order for me to see it

Is this laptop a 1650

@uFixTek

3 жыл бұрын

thank you! for the feedback and your support to the channel by SUB :P Regarding your question: yes it is and if it wasn't the steps are the same for even a 1050 version

I have a problem with disconnecting the battery. It's just won't go

@uFixTek

26 күн бұрын

im sorry but what doesn't "go", you can't take the battery out?

how to remove this baterry i cant

@uFixTek

3 ай бұрын

all you need is to bull the cables back , use force, you need to slide the cable back tot he battery.

Cleaned out my fan’s dust and it’s still making weird noises smh help

@uFixTek

3 жыл бұрын

can you send me a short video or audio of the sound that is making? ask@ufixtek.com

@StoryGirl0

3 жыл бұрын

@@uFixTek Do you have an instagram that I can send a video to? Its like a moderate to loud whirring noise that isnt the gpu. even at 5% usage its making noises. I took the laptop apart and cleaned dust, and went through my vents.

@uFixTek

3 жыл бұрын

no my friend i dont use any of those as rare it sounds but i dont have time to use those, you can email me i check my emails daily. you can email or upload a private video on you tube, and or use this: wetransfer.com/

@StoryGirl0

3 жыл бұрын

@@uFixTek ok

@StoryGirl0

Жыл бұрын

@@uFixTekwhat’s your email again 😂😂

i cleaned it and its faster but now it doesnt detect my hard drive.. what should i do ?

@uFixTek

Жыл бұрын

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, is not detecting your M.2 ssd or the HDD?

@emmacarena7103

Жыл бұрын

@@uFixTek @uFixTek will do ! thanks for responding so fast ! the D: hard drive so I guess hdd ?

@uFixTek

Жыл бұрын

can you double check the flex cable of the HDD that is inserted tot he motherboard: here is a video of the ssd hdd upgrade, it can help you to find the connector: kzread.info/dash/bejne/iZth2JamhczHiZM.html

@emmacarena7103

Жыл бұрын

@@uFixTek @uFixTek it isn't exactly the same model, mine is Lenovo IdeaPad l340-15api. I reopened it, and everything seems to be connected and in place. idk maybe the electric static discharge damaged it ? I'll drop it off to repair tomorrow I guess. thanks for trying to help

@uFixTek

Жыл бұрын

static discharge can't damage it my friend im very sure it is something simple, im sure the guy will resolve it right aways.

I accidentally pulled th wi fi wire and disconnected

@uFixTek

3 жыл бұрын

can you provide some picture so i can see: use this: prnt.sc/

i cant open the back at the ethernet port

@uFixTek

3 жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: you make sure you remove the screw :P and if you loosen up the other end of the case just pull up from other end and this side will snap out. they are hold by tiny clips that are not even important.

@soufathekiller6615

3 жыл бұрын

@@uFixTek i have subbed

@uFixTek

3 жыл бұрын

much appreciated :P

The battery life in this thing is horrendous. It was good for the 1st couple of months then whoops! The shit was tanked

@uFixTek

3 жыл бұрын

Thank you for the feedback and your support to the channel, regarding the battery it is horrible as we change them very often the quality of lithium polymer battery on this models are very low grade.

@tbgtrippy8618

3 жыл бұрын

as far as I know the problem is in MSI Afterburner if you are using it ofc, the thing is that MSI is constantly pinging your GPU which results in draining your battery faster

@tbgtrippy8618

3 жыл бұрын

so I think that maybe turning off the program while using your laptop on battery may solve your problem at least a little

hello sir i am from india and I own th same laptop that is lenovo l340 thermal pads on heatsink ,of my laptop are corroded like they are in powdered form on some parts please suggest me what should i do and reccomend me the thermal pads of perfect thickkness that are available in India on amazon . please reccommend .

@uFixTek

2 жыл бұрын

i think you have tween sibling that leave the same exact msg :P Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: get any 12kw and .2mm : is.gd/CmGARM

@devsati4311

2 жыл бұрын

@@uFixTek thanks sir

@devsati4311

2 жыл бұрын

@@uFixTek will the 2mm thickness thermal pad be good or I should go for 0.5 mm or 1mm thickness

@VIPER.digital

2 жыл бұрын

@@devsati4311 i have 17 inch version and original thermal pads are 1mm thick

@devsati4311

2 жыл бұрын

@@VIPER.digital hey bro are you sure ?