Where are the azimuths coming from? What accuracy? Do you get to put in height to centre of prism, and height of disto above station?

@LeicaGeosystemsCH

4 ай бұрын

All measurements transmitted into the DISTO Plan App are possible thanks to the inclination sensors, encoders for horizontal angle measurement and rotation measurement inside of the DST 360 adapter, respectively inside of DISTO S910. The height differences between the single points are based on the first measured point and the default height cannot be adjusted by a predefined value. Accuracy is 10 mm at 10 meters and angle accuracy is 0.2°.

Could you possibly put the target plate on a tripod too? Just wondering if this could be achieved with just 1 person doing the measurements?

@LeicaGeosystemsCH

7 ай бұрын

Theoretically, this would be possible if a timer were used where the user can set the trigger time to 2, 5, 10 or 30 seconds. However, it is always more efficient and accurate to carry out this type of measurement with the help of another person.

@granrey

2 ай бұрын

suggestion, most people are looking for solutions to work alone and minimize labor. You should be able to pause while measuring.

Can you write the model name of the target plate used in this video?

@LeicaGeosystemsCH

Жыл бұрын

Here is the link to the used target plate: shop.leica-geosystems.com/ca/buy/accessories/tpd-100-kit

0:34 "The measurement of the first 2 points latter provides the reference height or X-axis of the plan" ... didn't you mean "and" not "or" ? Also, I'm not sure how you get the XY coordinates of each point, I thought that was the job of Total Stations....

@LeicaGeosystemsCH

3 жыл бұрын

Yes, you are right. We will correct at least in the captions. Depending what export format you choose from DISTO Plan app, you will get either a 2D plan with dimensions and area information or a 3D CAD file with all the measured points also with height information.

@patrice373

3 жыл бұрын

@@LeicaGeosystemsCH Yes, the file format, but I hadn't realized there was a little motorised monopod capturing 2 rotations. I understand that's how the Disto can calculate a 3D coordinate. That's awesome ... I will get one.

@garyseymour954

2 жыл бұрын

Good to see a video showing measuring in the field, have an x4 and used it several times to measure gardens and driveways. Export works well. Seeing the red dot is difficult and the screen is not great. But a lot cheaper than a total station.

@gacokwaci737

2 жыл бұрын

How to measure the plan with different benchmark? I mean if i must moving the disto x4/s910 to other posisition to continue measure the next point.

@LeicaGeosystemsCH

2 жыл бұрын

@@gacokwaci737 Sorry for the late response. I saw the question today by chance. There is no specific function for this. But for any measurement the first 2 measured points are defining the 0/0/0 point and the x-axis. So just start again with the same first two points and you can later adjust the layouts to each other in the CAD system.

can we get it Real time coordinate or how can impute coordinate.

@LeicaGeosystemsCH

8 ай бұрын

This DISTO™ S910 function allows to create a DXF file for further use. For further developments this might be an interesting feature. Thank you for your feedback.

Does this work with the 510?

@LeicaGeosystemsCH

2 жыл бұрын

Sorry, no.

I have a disto x4 p2p and I'm trying to take a land survey with height differences. From the video description it appears that I can do that in p2p plan function and export raw 3d. I have don't this and am trying to import it into Archicad and all I'm getting are the 2d lines without any height information or 3d view. Is there any further information you can give me that might help? Thanks in advance. Tom

@LeicaGeosystemsCH

Жыл бұрын

Please contact our support directly and send an example file with it. disto-support.leica-geosystems.com/s/contactsupport

@shanepmor

Жыл бұрын

Hi Elliot, did you get this to work and is it successful when modelling a site in BIM. Thanks.

Why is impossible use leica d810?

@LeicaGeosystemsCH

Жыл бұрын

The DISTO D810 has no angle sensor inside and are not able to measure therefore P2P.

What is its price

@LeicaGeosystemsCH

2 жыл бұрын

We sell our product over dealers. Please check the dealers for your region on the website for prices.

is there a time limit between measurement?

@LeicaGeosystemsCH

2 ай бұрын

Once the DISTO connects to the DISTO Plan App and the connection is established, there is no upper limit between measurements, provided the batteries are sufficiently charged.

@granrey

2 ай бұрын

@LeicaGeosystemsCH So it's possible for one person to do this instead of 2? I mean you could stand the target pole on its own straight with a holder device and then head back to the device?

@LeicaGeosystemsCH

2 ай бұрын

@@granrey Yes, it is theoretically possible to carry out these measurements with just one person.

Can it measure infinite points?

@LeicaGeosystemsCH

2 жыл бұрын

Yes, there is no limitation of points.

@aadilreshi9379

2 жыл бұрын

@@LeicaGeosystemsCH but they say it can measure only 30 points...

@LeicaGeosystemsCH

2 жыл бұрын

@@aadilreshi9379 If you use the DISTO S910 and its dxf function to capture the points you are limited to 30 points, but using the DISTO Plan App, there is no point limitation.

@aadilreshi9379

2 жыл бұрын

@@LeicaGeosystemsCH does Disto Plan App supports Leica Disto X4 also with infinite points?

@LeicaGeosystemsCH

2 жыл бұрын

@@aadilreshi9379 Yes, that's correct.👍