Wow! Fantastic work! Great lights!

@LitBricks

2 жыл бұрын

Thank you!!

I can't believe how much of the ship you had to dismantle!!! It's an amazing build and it looks so good now lit up!!! WOW 👍😀

@LitBricks

2 жыл бұрын

It was very tedious. 🤣🤣 Thank you!

IV just completed the bow section, looks amazing. When you put the spot lights on for the funnel they make you sacrifice a lifeboat Davit which isn’t necessary. Move the light from a different spot closer to the funnel and angle up. Exact same effect and no need to sacrifice pieces off the model

WOW!!! that looks insane! I didn’t think the Titanic could get any better, but it did! 👏🏻👏🏻 Well done mate, fantastic job with the lights. Great video as always.

@LitBricks

2 жыл бұрын

Thank you!! I appreciate it!

Thanks for the great video! You convinced me to go with the LMB kit over GOB. I may end up buying extra lights for the skylights, bridge and main hull if I can figure it out once I assemble the thing.

@LitBricks

Жыл бұрын

I’m super happy I could help! Adding the extra lights is a great idea. I might do it as well. You really can’t go wrong with LMB. I don’t work for them I just know quality and lighting design when I see it.

OMG epic set .. with lighting from far it looks exactly like the real 🚢 great effort 👍👍

@LitBricks

2 жыл бұрын

Thank you!

I’m still building my ship (just the stern section remaining now), have ordered this light kit for it. That looks quite a task with all that disassembly 😮. But this vid will certainly be of great help, thank you.

@LitBricks

6 ай бұрын

That’s awesome! You’re definitely right, it’s a little tedious. 🤣 Happy I could help out! Thank you!

Awesome job Mike! Love the location!

@LitBricks

2 жыл бұрын

Thank you! I gotta say it’s weird without the cat bridge. I like it though.

@thefub101

2 жыл бұрын

What a great spot eh?? How did LEGO know??? Hahaha

@LitBricks

2 жыл бұрын

@@thefub101 Magic! 🤣🤣

Looks awesome man 😜👍 just wish you could light up the portholes.

Just starting to put the lights in your video was very helpful thanks 👍👍😁😁

@LitBricks

2 жыл бұрын

Thank you! It’s my pleasure! It’s why I do this! 😃

*@Lit Bricks* OMG how crazy is that the one? What a great idea. How many lights did you use in the Lego Titanic? That cost just as much as the boat itself? Fantastic!

@LitBricks

2 жыл бұрын

Thanks! There are a lot of lights. I’m not sure how many. It definitely isn’t cheap. 🤣

Love the Hoodie!!! My fav colour 😜

I installed the “Light my bricks” lighting kit on my Titanic. Looks awesome but took me longer to install the lights than it did to build it !!!

Super video - were you powering the Titanic's lights by battery or electricity (as Light My Bricks suggests in the instructions)? I was thinking of opting for LMB's lights but also looking at the GOB's option in order to light the lower levels. LMB's seems a better kit, but it would be great to light the lower levels to add authentic detail (some of GOB's other details are not authentic). It's my first build with lights, so am completely new to this - any tips appreciated.

@LitBricks

2 жыл бұрын

Thank you! I have it powered by electricity. It is a great kit but you’re right about the lower levels. I do kinda wish they had them lit. It’s great quality though. I’d say my best tip is to make sure you don’t pinch the wires if you don’t have too. You’ll come to understand when get started. Making sure wires are in between the studs is key as well. Patients will always help. 😃

i'm currently building the Titanic, the video contain major spoilers of the brick building experience so i'm gonna bookmark it till i finished mine xD, great video man!

@LitBricks

Жыл бұрын

🤣 No problem! Thank you!

Pretty Awsome

@LitBricks

2 жыл бұрын

Thanks!

Looks really cool, only thing I would have liked to have seen would have been some of the portholes in the black lower deck sections to have been lit

@LitBricks

2 жыл бұрын

There is another light company that did that. I might add them myself.

@jacquiedichter7194

Жыл бұрын

@@LitBricks Did you ever add the lights for the black portholes? I was wondering if the Light my Bricks kit had any blank ports on the expansion boards to somehow add in a micro expansion board and use the micro bit lights to add some porthole lights. I love the fact that you can take this one apart while it's lit, and you can't with the other company, I just can't bring myself to buy both kits just to cobble together black portholes on the light my brick kit.

@LitBricks

Жыл бұрын

@@jacquiedichter7194 I was going to do that and I still might. I just haven’t had the time. I don’t blame you for not wanting to buy another kit. Maybe I’ll make a video when I actually light up the portholes.

Weird question maybe: is it easier to implement the light immediately with the first build or do it afterwards? I will receive my first light kits soon, and am wondering what's the best way to start it. Great vid, as always! 😁

@LitBricks

2 жыл бұрын

The directions are always made for after the build. I’d say it’s easier that way anyway. After it’s built you can see better how and where to hide wires and put lights.

Hey how long do you think it took you for this set to do the lights? Obviously you had to film and stuff but otherwise? Cheers and loved seeing the process thank you for the vid.

@LitBricks

2 жыл бұрын

Thank you! It took about 5hr to put these lights on.

Oh man! Can’t wait for my turn to get this ship. The lighting kit is AWESOME! So, since it comes apart in 3 sections, I would assume each can be lit individually? How many batteries for each part, and last, dare I ask how much for the lighting kit??

@LitBricks

2 жыл бұрын

That is correct! Each section is lit individually. These are run using a USB cable to a wall plug. I’m pretty sure there’s a battery box in the kit that uses like 3 AA’s. The kit itself was $219.

@Driver0378

2 жыл бұрын

@@LitBricks Thanks for the info! Not as expensive as I was guessing in my head. :)

Hey - thanks for the video. My son is about half way through building the titanic. Are there specific instructions why light my bricks and how to disassemble to add the lights?

@LitBricks

Жыл бұрын

Light my bricks are the best quality. Their instructions are online and do a great job showing what to take apart.

could add a few lights to the namesign or maybe a lighting strip below it to shine on it like a spotlight?

@LitBricks

2 жыл бұрын

There is an extra slot in the expansion board on the sign. I’ll definitely do that! Thanks!

man that is awesome!!!! hey do you have the seinfeld set lighted up by any chance?

@LitBricks

2 жыл бұрын

I do! There’s a video on the channel.

@CampingDad247

2 жыл бұрын

@@LitBricks nice im ganna check that out!!

Great video. I may have a strange question but did you have parts that you have left after building in the light kit? I have 3 4×2 red blocks left and a black 14×1 block. Is that right?

@LitBricks

Жыл бұрын

Yes, that is correct! I just went and looked at what I had left after lighting it and those parts were in the bag!

@louwepost4421

Жыл бұрын

@@LitBricks Ok really thank you for your answer. And were there also a brown flat plate 8x2 and 4 brown 1x1 hook blocks left? Because I have te idea I may have forgotten to put them back haha. What parts more do you have left exactly ?

@LitBricks

Жыл бұрын

@@louwepost4421 Other than the 3 red and the one big black piece all I have left are the tiny extra parts that are left over.

It looks amazing! Do you need to use some kind of adhesives? I plan to tear it down one day and build it back together

@LitBricks

2 жыл бұрын

Thanks! No I did not. Everything is screws and metal brackets.

@larsnoorman

2 жыл бұрын

@@LitBricks thanks for your kind reply! Are those included in the light kit itself or did you screw it into the set itself?

@LitBricks

2 жыл бұрын

@@larsnoorman Oh! Thought you meant the tables. 🤦🏻‍♂️😃 The lights are held by the LEGO or a tiny 2 sided sticker.

@larsnoorman

2 жыл бұрын

@@LitBricks aah okay thank you! Might be difficult to dismantle then I guess. That's something to think about

wouldn't it be amazing if they would design all the interiors of the Titanic with lego? Even if you don't see them it would be awesome to knwo that it's all filled with details :)

@LitBricks

Жыл бұрын

That would be awesome!

May i ask where did you get that large wall shelf?

@LitBricks

2 жыл бұрын

Menards. It’s my local hardware/ home improvement store.

Hi just finished the first part of the titanic the last cable you have to disconnect 50 cm connection cable is that the power for the mid section if so where did you put it the instructions are not clear on this many thanks mick👍👍

@LitBricks

2 жыл бұрын

Yes. You remove it (the 50cm) and use it on part 2 step 4. Hope this helps. 😃

@michaeljay7843

2 жыл бұрын

@@LitBricks yes it helps a lot thanks very much for your help 👍👍😁😁

@LitBricks

2 жыл бұрын

@@michaeljay7843 My pleasure!

Looks really neat. Could you put a link to the lighting set you bought? Thanks.

@LitBricks

2 жыл бұрын

Most of them came from www.lightmybricks.com/

@LitBricks

2 жыл бұрын

Some of the others are Briksmax from Lightailing.com

@TheLegoStud

2 жыл бұрын

@@LitBricks Thanks. My wife wants to light up some of our sets but I didn’t know where to start. Then I stumbled upon your channel.

@LitBricks

2 жыл бұрын

@@TheLegoStud My pleasure! Happy to help! That’s what my channel is all about! 😃

@bcastromusic

2 жыл бұрын

I looked at all options and ended up w/ the game of bricks version with remote and sound. It has a remote, sound, and lights up the lower black section port holes. The only other thing I added was brickstuff wireless connectors so I can still remove the three sections from each other.

Can the installation of light bricks be done as inital building is happening

@LitBricks

Жыл бұрын

I would say that you can but, all the instructions have the installation after it’s built. It might be tricky to figure it out. Its possible though.

@stevengreenwood3470

Жыл бұрын

Awesome thanks mate I'm only on the front section atm man it's big lol

@LitBricks

Жыл бұрын

@@stevengreenwood3470 No problem! Have a great time building!

They should have lit up the cabins too.. don't you think so?

@LitBricks

Жыл бұрын

They probably should have. I might actually add some myself. I still like it though.

Hello. How difficult was it? Raté from 1 to 10 please

@LitBricks

Жыл бұрын

All light kits are kinda tedious. I’d say this one wasn’t too bad because of the size. I’ll give it 6 out of 10.

Exllence would be a accepted for this video and possibly off this planet is their any videos on the connection of the wire connection

@LitBricks

11 ай бұрын

Thank you! I might have a video about that in the backlog of videos. Are you looking for how I have everything hooked up to the wall plugs?

The stacks was never light up on the real ship, , ps nice work 🫡👌

@LitBricks

5 ай бұрын

Exactly right! That’s why they are spot lit only. Just to showcase the stack.