cool

4WD tank steering.

damn, thats pretty quick! nice one!

Looks like so much fun and with just one buwizz it's really fast. Wishing I had an extra two pair of m motors just to make this.

I just dropped my vid on this car

Go check it out and tell me what you think!

@marxpeklegotechnicdesign3

4 жыл бұрын

My instructions are live aswell Its pretty similar indeed. A few studs wider. But the performance is good and that is what counts! But i did notice yours could use some horizontal bracing, it looks like you could pull the frames on the sides off, can you throw yours like in my vid or will it come apart?

@buildableideas6074

4 жыл бұрын

Marxpek Lego Technic Design you are right about the frame it could use a little bit more support but yes I can throw mine and I can drive it down our steep stairs that are hardwood without it falling apart!

great! we need instrucrions or some detailed photos, please! Can you show some photos without wheels?

@marxpeklegotechnicdesign3

4 жыл бұрын

I will make a instructional video for it soon. Thanks for watching!

@krzysztofkwiatkowski1206

4 жыл бұрын

Instructions for a similar one by me are here rebrickable.com/mocs/MOC-43754/KAKwiatkowski/reversible-rc-car/

@marxpeklegotechnicdesign3

4 жыл бұрын

@@krzysztofkwiatkowski1206 not bad. But yours is alot bigger. And i cant say i like that gear-array..soo much torque is lost there.

@krzysztofkwiatkowski1206

4 жыл бұрын

@@marxpeklegotechnicdesign3 to be fair I came up with it at 1am and built it next morning. There are friction losses but I wanted to avoid having 4 L motors which would be a total overkill for this type of thing

@marxpeklegotechnicdesign3

4 жыл бұрын

@@krzysztofkwiatkowski1206 have you seen my channel? There is no such thing as overkill 😁

How do you avoid the overcurrent limiter kicking in?

@marxpeklegotechnicdesign3

4 жыл бұрын

4 m motors cannot trip the protection, so not needed in this model. But if it happens in other models. You are either using too many motors and/or putting too much stress on them (more torque needed is more amps drawn), so gear down. Buggy motors are a whole different story.. you need to ease into their power because of their insane inrush current. Hope this helps, feel free to ask, thanks for watching.

My suggestion instead of the M motor use the L motor. Great build!! Do a speed record again.

@marxpeklegotechnicdesign3

4 жыл бұрын

This does not really need L motors. It would give it more torque of course. But since it is very light, the 4 m motors provide enough torque. And 4 L motors might be too much for 1 buwizz, maybe not. Try it! 😀

@krzysztofkwiatkowski1206

4 жыл бұрын

I did one with L motors a month back or so rebrickable.com/mocs/MOC-43754/KAKwiatkowski/reversible-rc-car/

@krzysztofkwiatkowski1206

4 жыл бұрын

@@marxpeklegotechnicdesign3 two are enough

is it ok if i post a video of this car, i got 80% of my design from yours so i didn't know if you were ok with?

@marxpeklegotechnicdesign3

4 жыл бұрын

Sure, go ahead, im pretty sure this design has been done in several ways and form before, i am glad i could inspire you to build it and make a video! Enjoy!

Speed world record?!???

and i was going to make an instructional video too if that's good with you. i just want to check because i don't want seem like i am steeling views or something. thanks!

@marxpeklegotechnicdesign3

4 жыл бұрын

I will be making a insctructional video for mine as well, would be fun to see how well you copied it.

nice. this is the first time i see "no views" on the view counter :D

@marxpeklegotechnicdesign3

4 жыл бұрын

So basically you are screamin "FIRST" but you are too polite to do so. 😉😁

@littleraptor9898

4 жыл бұрын

@@marxpeklegotechnicdesign3 lolz. i dont do that, even tho iam still a kid, i have enough braincells to not be.............. lets say it, CRINGE. it is always a pleasure to watch your videos, i might give this one a try, but i will modify it a "little".