Thats just crazinss in little small pack. cant do that with ir receiver... I love it 🔥🏆🤩

Great building 👍👍

Oh man this is a superfast Monster...great Work...

@marxpeklegotechnicdesign3

4 жыл бұрын

Thank you! Instruction vid soon!

@TIME_TO_FIND_OUT24

Жыл бұрын

@@marxpeklegotechnicdesign3 is that from store or l need to get bricks

@TIME_TO_FIND_OUT24

Жыл бұрын

@@marxpeklegotechnicdesign3 that l can get

@marxpeklegotechnicdesign3

Жыл бұрын

@@TIME_TO_FIND_OUT24 hey! This is my own creation so you have to gather the parts yourself. I did make an instructional video for it. You can find it on my channel. The buwizz has about 60m range, depending on your phone an surroundings, thanks for watching!

Like the super fast ones

They need to revive these things. The buggy I'm getting won't stand up to the speed of these things. 😥

Absolutely love it! right now i´m trying hard to re-build it from the video, and i´m almost there, but i can´t get behind the Steering and front-wheel hub! could you PLEASE add a few more detailed photographs? that would be awesome, my son&i are longing for a racer of that category! thnx!

@marxpeklegotechnicdesign3

6 жыл бұрын

Los Paul I'm honored you took the time to reverse engineer it. I will take some detailed pictures for you and your son! But i must warn you: there is a illegal connection in it which puts some pressure on the buwizz, it did not cause any issues of course, but just giving you the heads up (maybe you can improve it even)

@marxpeklegotechnicdesign3

6 жыл бұрын

I have made a few quick pictures, but it was hard to show the inner steering assembly, so i will describe what you cannot see: on the servo is a 8z gear that meshes with part nr 6574, (Gear Rack 1 x 2 with Ball Joints), this rests on a 1x3 system plate which sits on top a 1x2 technic brick with 2 pinholes, and a 1x1 technic brick with pinhole. in front there is a (black) fake engine mounting brick, but that is visible. bricksafe.com/pages/Marxpek/supersonic-rc-buggy i hope these help, feel free to ask more details if needed, i would love to see a picture of your version!

@ThatGuy_0815

6 жыл бұрын

What do you mean by "illegal connection"?

@marxpeklegotechnicdesign3

6 жыл бұрын

Bernd Weber a connection that Lego would not use. In this case: a very slightly bent liftarm to make pinholes line up.

@ThatGuy_0815

6 жыл бұрын

Ok, thanks

What is top speed?

Needs a longer wheelbase for more stability at high speed.

@marxpeklegotechnicdesign3

4 жыл бұрын

This car wasnt built for speed but for stunts and fun driving. Making the wheelbases longer will make it less agile, it is always a trade off. Btw working on instructions for this one, comming soon!

How long is his range?

Hello I have many questions about this set: How much is it worth? Can’t find clear answer How old is it? Should I buy for 225 new but box opened once (still technically sealed Bc bags not opened and retaped) Need answers quick!

@marxpeklegotechnicdesign3

3 жыл бұрын

This is no set? This is my own design. Maybe you are confused with the 8475 or the 8366. Those sets are from 2005 i think. And 225 is a good price for those sets sealed. But if you did find someone selling my design: 225 is cheap as chips.

@viewer-r5t

3 жыл бұрын

@@marxpeklegotechnicdesign3 8366 sorry

Nice!! I finally got 8376 and 8475!! 8366 is way too expensive :)

@marxpeklegotechnicdesign3

3 жыл бұрын

Ill trade you a 8366 for a 8376 anyday! Those are hard to find here

@UltimateLegoProductions123

3 жыл бұрын

@@marxpeklegotechnicdesign3 got it for 60 cad. For 8475 which I'm receiving next week. All are less than 200 us

1:35 Whaaat??? With two buggy motors on the fast output, how can this beast handle such an incline? Great model anyway ;) Will you make instructions? Thanks :)

@marxpeklegotechnicdesign3

6 жыл бұрын

Bernd Weber If i recall it correct the incline was taken with the normal setting on the buwizz. Fast and ludicrous would trip the protection. But indeed a beast it is, lightweight ,lots of tractrion and even more power 😁. I might make instructions for it if there is more interest.

@ThatGuy_0815

6 жыл бұрын

Ahhh I understand... So less is more ;) Yes, it would be really helpful if you made instructions! Thank you very much :D

@marxpeklegotechnicdesign3

6 жыл бұрын

bricksafe.com/pages/Marxpek/supersonic-rc-buggy perhaps these help for now, it is not a complex car, maybe you can reverse engineer it with these pictures, check the conversation I have with Los Paul for a bit more details.

@ThatGuy_0815

6 жыл бұрын

Thank you! Building it from these pictures is quite challenging, but I think I'll manage it. But why did you mount the front shocks noch on the same point (first picture)? Again, thank you so much!

Great car. Do you only use the power of the BuWizz but the Radio Control 2.4Ghz of the original Set? If not: is combining of this two technics possible?

@marxpeklegotechnicdesign3

4 жыл бұрын

Thanks! Just the buwizz is used here. The rc unit is pretty bulky, using them both would be very complicated electrically, if not impossible, i made a how to build video maybe check that out! Thanks for watching!

@pottingermusic

4 жыл бұрын

@@marxpeklegotechnicdesign3 i failed using the two buggy motors at one single BuWizz. The BuWizz switched off after 2 seconds. Only one Buggy Motor could be powered simultaneously. How did you solve this? Two Buggys at one BuWizz worked really with fast or even ludicrous mode?

@marxpeklegotechnicdesign3

4 жыл бұрын

@@pottingermusic when you accelerate too fast with 2 (or sometimes even 1) buggy motors there is a huge inrush current, a big spike of power needed that trips the buwizz protection on ludicrous and sonetimes on fast mode. To work around it: start in normal and then switch upto ludicrous, or, use the buwizz power curve settings to make sure you wont accelerate too fast and always try to be gentle on the throttle from a standstill. Hope this helps.

@pottingermusic

4 жыл бұрын

Many thanx for your Help. And if you need some Rock Background Music for your Videos check my Band in KZread and Spotify.

When are your RC car videos are going to come out???

@marxpeklegotechnicdesign3

6 жыл бұрын

this summer for sure, problem is: i need a few dry days, wet roads and wet sides are bad for testing. but with summer on the horizon it should happen soon. ps besides a 100% Lego record i also want to take to buwizz speed record, stay tuned!

Where can i get these "real" buggy-motors? (there are many fake motors for 15$)

@marxpeklegotechnicdesign3

4 жыл бұрын

Bricklink brickowl and used marketplaces are your best bet. They are out of production since 2005 so they are getting rare and expensive sadly.

@VioDieHeisse

4 жыл бұрын

@@marxpeklegotechnicdesign3 www.brickowl.com/catalog/lego-race-buggy-motor-42908 is that the right?

What sets will I need to buy to make this?

@marxpeklegotechnicdesign3

3 жыл бұрын

There is an instructional video for it on my channel. But its mainly made from parts from the 8366 and 8475 but also some additional parts

Do you drive this car in ludicrous Mode?

@marxpeklegotechnicdesign3

3 жыл бұрын

The video was mostly shot on fast mode. Lud. mode gives issues with driving away and accelerating too fast.(buwizz current protection can trip) But this is very light so it can be done.

Man, how many buggy motors do you have??????

@marxpeklegotechnicdesign3

3 жыл бұрын

Hey! Thanks for watching! I think i have about 20 of them, cant power them all together tho sadly. Did you know buwizz will release a new and improved version of this motor? Check my affiliate link buwizz.com/?ref=16 you should be able to find them there!

Tutorial ?

@marxpeklegotechnicdesign3

3 жыл бұрын

You can find that on my channel.

instructions?

@marxpeklegotechnicdesign3

4 жыл бұрын

There are none atm, but i plan to make them soon.

@marxpeklegotechnicdesign3

4 жыл бұрын

They are up now!

@kennethpong7050

4 жыл бұрын

Hi, where can i find the instruction?

@CorerMaximus

4 жыл бұрын

Kenneth Pong check the channel.