After publishing the video I realized the air leak was not the gas can vent cap it was my lousy epoxy job. Those gas can caps actually work better than I show in the video. The tape I used is not Teflon, it is UHMW. If you buy the SK11 blades DO NOT use them in a jigsaw. This video will show why: kzread.info/dash/bejne/gKaoq7SQhbKYdKg.html

Just gotta say, the BEST Leatherman is the Surge...

I like your blade storage idea it would make great dual purpose storage and a bellow for fire making.

@bzeug

3 жыл бұрын

oh i didnt think of a bellow! yes

@smertrusne3156

4 ай бұрын

How about the heat forming the PVC with the heat gun? It require a rectangle for a few flat blades, and I guess that smaller tube you was showing can fit a few inside. Tail can be sealed with a heat, only a cap may need some filing work, I suppose.

I fixed the wobbling blade by putting a layer on JB Weld on the tang of the Tshank blades. After it Hardened I filed it to the appropriate thickness.

@PaulSchortemeyer

2 жыл бұрын

Just tried this. A bit fussy to get the thickness right (!) but overall very happy with the outcome. Thanks for the great idea!

@billystink4611

2 жыл бұрын

Good idea, I’d probably just jam a piece of bicycle tubing in there and call it a day lol.

Try laminating another thin used blade snapped or cut to your optimal length for play and rigidity. Use JB weld or or a flexible like 6000E glue.

Use heat shrink on the t shank so it will help eliminate the blade play.

Love that blade carrier 👍

I thought we had to use blades with the little hole. I guess we don’t. Well imma get some blades now. Couldn’t find any here with the holes in the t shank. Thanks for this.

Works very well, the slop can be dealt with. I’d grind off those last few teeth since you’re not cutting with them anyway. They could snag your glove too.

Wrap the blade in a couple of layers of newspaper. That is how I transport kitchen knives after sharpening them for others.

Thanks for the video.

Love love this

Хорошая работа, хорошие идеи. Подписался. Уважение! Good work, good ideas. Subscribed. Respect!

Incredible. How useful is this.

@CLOClayton

2 жыл бұрын

It's entertaining

Once I realised it’s got this and the driver capacity, I’ve ordered. Bow saw in your pocket.

get a smaller pvc diameter and then blow hot air through it and flatten it abit . that way the saws fit and the form factor fits better in a pocket

Did you try using the file to take out the sharp edge that would be near your finger?

Cool pants.

I slit a plastic straw and slide in the blade. A tiny piece of tape keeps it closed.

What if you wiped some flux on the mounting T, then tinned it?

Cool

ADD a very short blade with the long blade.

Hi. Thanks for a great video. We all love our surge for sure. Can u recommend the best steel blade? God knows one day I gonna have to cut my own padlock or doorknob

@natedeezil

3 жыл бұрын

Polished hardened steel... is tuff to get thru with any hand tool. Try t1018afr bosch blade.

Where did you find the saw blades for sale?

Cut another Blade 1mm and put in With It so you have 2 t shanks

Great video! Which gloves do you use?

@bzeug

2 жыл бұрын

Thank you! Those gloves are the Milwaukee Demolition gloves.

Shims baby shims, then its golden.

Enthusiasts solve this problem by cutting a 1 mm thickness insert for a holder on a laser metal cutting machine. It's a Blade tail-like shape, and it's is on a local market now. Already bought a few of them now. Its not patented - do it for yourself.

Wrap some insulation tape around the shank to beef it up maybe 🤔

Başka neler hangi aletler takılabilir

Do you think a cheap toothbrush holder would work?

@bzeug

2 жыл бұрын

I think that's a cleaver idea. If the dimensions are adequate it would be way easier and cheaper than the blade holder I made!

Really nice saw blade but I'd be so annoyed that I might snap it. I also don't really like that exchanger on the Surge. It is way too weak for my taste.

@luckymeziere3675

2 жыл бұрын

Well I’d happily take your surge off your hands

Just stitch some leather sheaths

You need to use the correct tool for each job to be done, a hand multitool is designed for small jobs and people like this trying to demonstrate the tool is inefficient when it never was designed for that.