Welcome to my first Will It Run. Hopefully you enjoy it, I know I had lots of fun doing this video. ---- KZread seems to be slow at processing this one, The quality should go up to 4K eventually and if not I`ll have to re upload. Leave me a comment below. Thanks for watching :)

@elvedprice5569

2 жыл бұрын

dee .

@elvedprice5569

2 жыл бұрын

debe ser impresionante armar un chip

I was looking at a 1951 for sale recently, but since I'm 6'2", no way i could comfortably drive it especially trying to shift it. Great video!!!

@stagealphagarage

11 ай бұрын

Thanks, Yea it would be a bit cramped but still lots of fun haha. Cheers

Respect!!🎉

@stagealphagarage

8 күн бұрын

Thanks :)

I've got a '52 M38 that hasn't run in 14+ years. Working on a carb rebuild and a re-wire right now. I love coming across these "will it run" type videos. They prove those old Go Devil's can take a beating, and still come back to life.

@stagealphagarage

2 жыл бұрын

Thanks for checking the video out, It was a tonne of fun getting this going. I`ll get the tire fixed & oil changed to go for a longer drive! Good luck on your carb rebuild, I need to re-wire as well but I may cheat and buy a harness not sure yet. Cheers

@JeepGarageCA

2 жыл бұрын

I bought a universal harness myself. I'm doing a conversion from 24v to 12v, and I find writing oddly soothing. I did make a decision not to go perfect all at once, just get it running, safe, and on the road. From there, I'll focus on restoring it and getting back to near showroom looks. (But keeping some military character)

@harryrimmer6830

2 жыл бұрын

@@JeepGarageCA Don't change the M38 from 24V to 12 V. Surplus parts for the 24V system are still available. I would challenge you to restore the Jeep to its original condition. You will be proud to drive it.

@JeepGarageCA

2 жыл бұрын

@@harryrimmer6830 I'll enjoy driving it regardless of the electrical system being 12 or 24v. It was already 12v for the engine (starter, generator, coil, basically the expensive stuff.) I'm just finishing the job with the lights and replacing the rest of the 70 year old wiring, adding in a fuse panel, and respecting the heritage by keeping it as stock looking as possible. Ultimately, my goal, is to make it something to have fun in, that's safe, and to not obsess over having it 100% factory accurate.

Listen to the Willys purr!

@stagealphagarage

2 жыл бұрын

Thanks for watching, I was surprised how well it did, I will be doing more to this in the future.

Would be sweet to see more of this willys

@stagealphagarage

2 жыл бұрын

For sure! I`ve got a couple things to take care of first but there will be more :) Thanks for watching

She purrs like a kitten!👍

@stagealphagarage

2 жыл бұрын

Sure does, I bet it`ll sound even better after a proper tune up! Thanks for watching, Cheers

@anibalbabilonia1867

2 жыл бұрын

@@stagealphagarage agreed!

Get it indoors, up in the air 👍 How good is your tig welding 😁 convert it to 12 volts, restore it and sell it 🤘

@stagealphagarage

2 жыл бұрын

Not sure how good my TIG welding is but I have bought myself a TIG welder & accessories. Going to start practicing on my shop truck it needs a new rear bumper & I have this really cool old steel bumper that I want to fabricate on. I figure that it is a good starting project. I posted a picture of the snow pile blocking the Willys in over on my Instagram StageAlphaGarage so you can see. I probably won't end up selling it as I am not sure I`ll be able to ever get it registered, I bought it from a Farmer who did not have time for it and he go it from another Farmer so tracking down the paperwork will be a challenge.

Cool👍👍

@stagealphagarage

2 жыл бұрын

Thanks

hi there good job got one of those john

@stagealphagarage

2 жыл бұрын

Thank you, Cheers

I have one of these in my garage in pieces, if you need parts an I have them em me.I would love to sell it off and get it out of my garage.

@stagealphagarage

2 жыл бұрын

Yeah I may be interested in a few things. Send me a message shaker@stagealphagarage.com. Cheers :)

@quentinwyne5917

Жыл бұрын

Hey got any jeep parts left?

Even has gauges still in the dashboard and it's encouraging the back is covered up.

@stagealphagarage

2 жыл бұрын

Thanks for tuning in. I look forward to doing more work to this.

Would love to have one of these

@stagealphagarage

2 жыл бұрын

If you find yourself one there is a lot of support & parts out there for these. Thanks for watching :)

pretty good video. i would like to see it tuned and cleaned up a bit. no crazy rebuild, just back to running order.

@stagealphagarage

2 жыл бұрын

Yes will be getting to it sometime between now & spring. I have to get my shop truck finished first (it should of went to the wrecking yard) but just cab corners & rockers to do now. I don't plan on restoring the Jeep to be show quality but I do want to get the mechanical and driveline done and just patch the body where needed. I like the old weathered look of it. Thanks for watching, Cheers

Fill it with fluids, strip down and clean the carb 👍

@stagealphagarage

2 жыл бұрын

Will be doing that for sure, Just waiting for the massive snow pile to melt so I can get to the Willys again. I`m glad winter is coming to an end, Ugh snow.... Thanks for the comment and view. Cheers

@de9ux

2 жыл бұрын

@@stagealphagarage Stay safe there, no snow in London, UK 🇬🇧 but a broken motorbike (dropped inlet valve) in my garage. 👍I'm a retired mechanic 😁

@stagealphagarage

2 жыл бұрын

I miss London & the UK so much. Was just there visiting family before this whole darn pandemic started & now very much looking forward to going back.

duh ,the one solenoidoperates the snow plow switch.

just wanted to mention something to you i mostly listen with headphones if i adjust volume to music can't hear you talk then adjust for speech then music comes on and almost blows headphones off my head might try adjusting so music and voice the same thanks

@stagealphagarage

2 жыл бұрын

Will try to get that more evened out, I appreciate the feedback. I`ll make sure to listen through with my headphones on, I mean I should always use them when editing but sometime I do not. Cheers

Points need to be set once they are installed. PLease look it up

@stagealphagarage

Жыл бұрын

Will do, Cheers

that motor on the front that you called a winch ,sure looks like a snow plow hydraulic motor?

@stagealphagarage

2 жыл бұрын

There are no hydraulic lines but I do agree with you its for some type of very simple electric powered hydraulic plow that just gets moved vertically.

Seems like everybody knows mortski. In the car world.

@stagealphagarage

2 жыл бұрын

Haha, Yea he works on cool stuff. Thanks for the Subscribe & Comment. Cheers

Brutus.

I don't think you can call that running and driving.

@stagealphagarage

2 жыл бұрын

Well it wasn't a hamster making it move lol. Being it not insured, registered or inspected & then taking it on any public road here in Canada will result in fines & trouble.

weak battery

@stagealphagarage

2 жыл бұрын

Yeah I got a 6V charger now so should not have that problem anymore. Once the snow clears up a bit here I`ll be able to get to the Willys. Thanks for watching :)

Horrible music